This series brings support for Snapdragon 630 and
a few smartphones based on this SoC, namely all
sdm630-based Xperias.
At the moment the things that the platform needs
the most are RPM regulator support (but that's in
the works already), MMCC/GPUCC drivers and perhaps
some USB stuff. Overall, lookin' pretty good, as we
can reuse many existing drivers.
Konrad Dybcio (7):
pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility
Documentation: Document pm660(l) SPMI GPIOs compatible
soc: qcom: socinfo: Add socinfo entry for SDM630
clk: qcom: smd: Add support for SDM660 rpm clocks
arm64: dts: qcom: pm660(l): Add base dts files
arm64: dts: qcom: sdm630: Add sdm630 dts file
arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile
platform)
Martin Botka (1):
arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges
platform)
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
.../bindings/pinctrl/qcom,pmic-gpio.txt | 2 +
arch/arm64/boot/dts/qcom/Makefile | 5 +
arch/arm64/boot/dts/qcom/pm660.dtsi | 60 ++
arch/arm64/boot/dts/qcom/pm660l.dtsi | 45 +
arch/arm64/boot/dts/qcom/sdm630-pins.dtsi | 268 +++++
.../qcom/sdm630-sony-xperia-ganges-kirin.dts | 13 +
.../dts/qcom/sdm630-sony-xperia-ganges.dtsi | 39 +
.../sdm630-sony-xperia-nile-discovery.dts | 13 +
.../qcom/sdm630-sony-xperia-nile-pioneer.dts | 13 +
.../qcom/sdm630-sony-xperia-nile-voyager.dts | 20 +
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 136 +++
arch/arm64/boot/dts/qcom/sdm630.dtsi | 991 ++++++++++++++++++
.../sdm636-sony-xperia-ganges-mermaid.dts | 19 +
drivers/clk/qcom/clk-smd-rpm.c | 77 ++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 +
drivers/soc/qcom/socinfo.c | 1 +
include/dt-bindings/clock/qcom,rpmcc.h | 10 +
18 files changed, 1717 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
--
2.27.0
Add support for pm660(l) SPMI GPIOs. The PMICs feature
13 and 12 GPIOs respectively, though with a lot of
holes inbetween.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index fe0be8a6ebb7..95ca66e24e7c 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1118,6 +1118,10 @@ static const struct of_device_id pmic_gpio_of_match[] = {
{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
+ /* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */
+ { .compatible = "qcom,pm660-gpio", .data = (void *) 13 },
+ /* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */
+ { .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
--
2.27.0
Add base DTS files for pm660(l) along with GPIOs, power-on and
rtc nodes.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/pm660.dtsi | 60 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm660l.dtsi | 45 +++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000000..94eca5a1cf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+ pmic@0 {
+ compatible = "qcom,pm660", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pon: pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
+ pm660_gpios: gpios@c000 {
+ compatible = "qcom,pm660-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000000..6de56b220c56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+ pmic@2 {
+ compatible = "qcom,pm660l", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm660l_gpios: gpios@c000 {
+ compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xca 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmic@3 {
+ compatible = "qcom,pm660l", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
\ No newline at end of file
--
2.27.0
Add rpm smd clocks, PMIC and bus clocks which are required on
SDM630/660 (and APQ variants) for clients to vote on.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
drivers/clk/qcom/clk-smd-rpm.c | 77 +++++++++++++++++++
include/dt-bindings/clock/qcom,rpmcc.h | 10 +++
3 files changed, 88 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 90a1349bc713..2ced7807d574 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -20,6 +20,7 @@ Required properties :
"qcom,rpmcc-msm8996", "qcom,rpmcc"
"qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
+ "qcom,rpmcc-sdm660", "qcom,rpmcc"
- #clock-cells : shall contain 1
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 52f63ad787ba..2f1881d8bd48 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -766,15 +766,92 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
.num_clks = ARRAY_SIZE(msm8998_clks),
};
+/* sdm660 */
+DEFINE_CLK_SMD_RPM_BRANCH(sdm660, bi_tcxo, bi_tcxo_a, QCOM_SMD_RPM_MISC_CLK, 0,
+ 19200000);
+DEFINE_CLK_SMD_RPM(sdm660, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(sdm660, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(sdm660, cnoc_periph_clk, cnoc_periph_a_clk,
+ QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, mmssnoc_axi_clk, mmssnoc_axi_a_clk,
+ QCOM_SMD_RPM_MMAXI_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
+DEFINE_CLK_SMD_RPM(sdm660, aggre2_noc_clk, aggre2_noc_a_clk,
+ QCOM_SMD_RPM_AGGR_CLK, 2);
+DEFINE_CLK_SMD_RPM_QDSS(sdm660, qdss_clk, qdss_a_clk,
+ QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, div_clk1, div_clk1_a, 11);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk1, ln_bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk2, ln_bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk3, ln_bb_clk3_a, 3);
+
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk1_pin,
+ ln_bb_clk1_pin_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk2_pin,
+ ln_bb_clk2_pin_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk3_pin,
+ ln_bb_clk3_pin_a, 3);
+static struct clk_smd_rpm *sdm660_clks[] = {
+ [RPM_SMD_XO_CLK_SRC] = &sdm660_bi_tcxo,
+ [RPM_SMD_XO_A_CLK_SRC] = &sdm660_bi_tcxo_a,
+ [RPM_SMD_SNOC_CLK] = &sdm660_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &sdm660_snoc_a_clk,
+ [RPM_SMD_CNOC_CLK] = &sdm660_cnoc_clk,
+ [RPM_SMD_CNOC_A_CLK] = &sdm660_cnoc_a_clk,
+ [RPM_SMD_CNOC_PERIPH_CLK] = &sdm660_cnoc_periph_clk,
+ [RPM_SMD_CNOC_PERIPH_A_CLK] = &sdm660_cnoc_periph_a_clk,
+ [RPM_SMD_BIMC_CLK] = &sdm660_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &sdm660_bimc_a_clk,
+ [RPM_SMD_MMSSNOC_AXI_CLK] = &sdm660_mmssnoc_axi_clk,
+ [RPM_SMD_MMSSNOC_AXI_CLK_A] = &sdm660_mmssnoc_axi_a_clk,
+ [RPM_SMD_IPA_CLK] = &sdm660_ipa_clk,
+ [RPM_SMD_IPA_A_CLK] = &sdm660_ipa_a_clk,
+ [RPM_SMD_CE1_CLK] = &sdm660_ce1_clk,
+ [RPM_SMD_CE1_A_CLK] = &sdm660_ce1_a_clk,
+ [RPM_SMD_AGGR2_NOC_CLK] = &sdm660_aggre2_noc_clk,
+ [RPM_SMD_AGGR2_NOC_A_CLK] = &sdm660_aggre2_noc_a_clk,
+ [RPM_SMD_QDSS_CLK] = &sdm660_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &sdm660_qdss_a_clk,
+ [RPM_SMD_RF_CLK1] = &sdm660_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &sdm660_rf_clk1_a,
+ [RPM_SMD_DIV_CLK1] = &sdm660_div_clk1,
+ [RPM_SMD_DIV_A_CLK1] = &sdm660_div_clk1_a,
+ [RPM_SMD_LN_BB_CLK] = &sdm660_ln_bb_clk1,
+ [RPM_SMD_LN_BB_CLK] = &sdm660_ln_bb_clk1_a,
+ [RPM_SMD_LN_BB_CLK2] = &sdm660_ln_bb_clk2,
+ [RPM_SMD_LN_BB_CLK2_A] = &sdm660_ln_bb_clk2_a,
+ [RPM_SMD_LN_BB_CLK3] = &sdm660_ln_bb_clk3,
+ [RPM_SMD_LN_BB_CLK3_A] = &sdm660_ln_bb_clk3_a,
+ [RPM_SMD_RF_CLK1_PIN] = &sdm660_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &sdm660_rf_clk1_a_pin,
+ [RPM_SMD_LN_BB_CLK1_PIN] = &sdm660_ln_bb_clk1_pin,
+ [RPM_SMD_LN_BB_CLK1_A_PIN] = &sdm660_ln_bb_clk1_pin_a,
+ [RPM_SMD_LN_BB_CLK2_PIN] = &sdm660_ln_bb_clk2_pin,
+ [RPM_SMD_LN_BB_CLK2_A_PIN] = &sdm660_ln_bb_clk2_pin_a,
+ [RPM_SMD_LN_BB_CLK3_PIN] = &sdm660_ln_bb_clk3_pin,
+ [RPM_SMD_LN_BB_CLK3_A_PIN] = &sdm660_ln_bb_clk3_pin_a,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_sdm660 = {
+ .clks = sdm660_clks,
+ .num_clks = ARRAY_SIZE(sdm660_clks),
+};
+
static const struct of_device_id rpm_smd_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
{ .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
+ { .compatible = "qcom,rpmcc-sdm660", .data = &rpm_clk_sdm660 },
{ .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
{ }
};
+
MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
static struct clk_hw *qcom_smdrpm_clk_hw_get(struct of_phandle_args *clkspec,
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
index ae74c43c485d..d1afa634b58d 100644
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -133,5 +133,15 @@
#define RPM_SMD_RF_CLK3_A 87
#define RPM_SMD_RF_CLK3_PIN 88
#define RPM_SMD_RF_CLK3_A_PIN 89
+#define RPM_SMD_MMSSNOC_AXI_CLK 90
+#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
+#define RPM_SMD_CNOC_PERIPH_CLK 92
+#define RPM_SMD_CNOC_PERIPH_A_CLK 93
+#define RPM_SMD_LN_BB_CLK3 94
+#define RPM_SMD_LN_BB_CLK3_A 95
+#define RPM_SMD_LN_BB_CLK1_PIN 96
+#define RPM_SMD_LN_BB_CLK1_A_PIN 97
+#define RPM_SMD_LN_BB_CLK2_PIN 98
+#define RPM_SMD_LN_BB_CLK2_A_PIN 99
#endif
--
2.27.0
Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.
XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 3 +
.../sdm630-sony-xperia-nile-discovery.dts | 13 ++
.../qcom/sdm630-sony-xperia-nile-pioneer.dts | 13 ++
.../qcom/sdm630-sony-xperia-nile-voyager.dts | 20 +++
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 136 ++++++++++++++++++
5 files changed, 185 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..1cad7cb07574 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000000..2d7f0ceca4aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Discovery-RoW";
+ compatible = "sony,discovery-row", "qcom,sdm630", "qcom,sdm630-mtp";
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000000..45f794440d19
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Pioneer-RoW";
+ compatible = "sony,pioneer-row", "qcom,sdm630", "qcom,sdm630-mtp";
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000000..4c2b7fa9d0a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Voyager-RoW";
+ compatible = "sony,voyager-row", "qcom,sdm630", "qcom,sdm630-mtp";
+
+ chosen {
+ framebuffer@9d400000 {
+ reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+ height = <2160>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000000..39f1cffe9853
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <318 0>;
+ qcom,board-id = <8 1>;
+ qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+ /* This part enables graphical output via bootloader-enabled display */
+ chosen {
+ bootargs = "earlycon=tty0 console=tty0";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ status= "okay";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc00000 0x0 0x100000>;
+ record-size = <0x10000>;
+ console-size = <0x60000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ status = "okay";
+ };
+
+ debug_region@ffb00000 {
+ reg = <0x00 0xffb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ removed_region@85800000 {
+ reg = <0x00 0x85800000 0x00 0x3700000>;
+ no-map;
+ };
+ };
+
+ soc {
+ gpio_keys {
+ status = "okay";
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ camera_focus {
+ label = "Camera Focus";
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ debounce-interval = <15>;
+ };
+
+ camera_snapshot {
+ label = "Camera Snapshot";
+ gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ };
+
+ vol_down {
+ label = "Volume Down";
+ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ sdhci@c0c4000 {
+ status = "okay";
+
+ /* SoMC Nile platform's eMMC doesn't support HS200 mode */
+ /delete-property/ mmc-hs200-1_8v;
+ };
+
+ i2c@c175000 {
+ status = "okay";
+
+ /* Synaptics touchscreen */
+ };
+
+ i2c@c176000 {
+ status = "okay";
+
+ /* SMB1351 charger */
+ };
+
+ /* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+ i2c@c1b6000 {
+ status = "okay";
+
+ /* NXP NFC */
+ };
+
+ serial@c1af000 {
+ status = "okay";
+ };
+ };
+
+};
\ No newline at end of file
--
2.27.0
From: Martin Botka <[email protected]>
Add device tree support for the Sony Xperia 10 and 10
Plus smartphones. They are all based on the Sony Ganges
platform (sdm630/636) and share a lot of common code.
The differences are really minor, so a Ganges-common DTSI
has been created to reduce clutter.
10 - Kirin
10 Plus - Mermaid
This platform is based on SoMC Nile, but there are some
major differences when it comes to pin configuration and
panel setup (among others).
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Martin Botka <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../qcom/sdm630-sony-xperia-ganges-kirin.dts | 13 +++++++
.../dts/qcom/sdm630-sony-xperia-ganges.dtsi | 39 +++++++++++++++++++
.../sdm636-sony-xperia-ganges-mermaid.dts | 19 +++++++++
4 files changed, 73 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1cad7cb07574..c98bafe03a96 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,9 +16,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
new file mode 100644
index 000000000000..5326e019db20
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+ model = "SoMC Kirin-RoW";
+ compatible = "sony,kirin-row", "qcom,sdm630", "qcom,sdm630-mtp";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
new file mode 100644
index 000000000000..6c4c30e4cd9d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Ganges is very similar to Nile, but
+there are some differences that will need
+to be addresed when more peripherals are
+enabled upstream. Hence the separate DTSI. */
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ chosen {
+ framebuffer@9d400000 {
+ reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+ height = <2520>;
+ };
+ };
+
+ soc {
+
+ i2c@c175000 {
+ status = "okay";
+
+ /* Novatek touchscreen */
+ };
+
+ /* Yes, this is intentional.
+ Ganges devices only use gpio-keys for
+ Volume Down, but currently there's an
+ issue with it that has to be resolved.
+ Until then, let's not make the kernel panic
+ */
+ /delete-node/ gpio-keys;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
new file mode 100644
index 000000000000..97dce64d0185
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Mermaid uses sdm636, but it's different ever so slightly
+that we can ignore it for the time being. Sony also commonizes
+the Ganges platform as a whole in downstream kernels. */
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+ model = "SoMC Mermaid-RoW";
+ compatible = "sony,mermaid-row", "qcom,sdm636", "qcom,sdm636-mtp";
+
+ qcom,msm-id = <345 0>;
+ qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
+};
--
2.27.0
This patch adds missing soc ID for SDM630.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/socinfo.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 5983c6ffb078..705f142ee588 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -202,6 +202,7 @@ static const struct soc_id soc_id[] = {
{ 310, "MSM8996AU" },
{ 311, "APQ8096AU" },
{ 312, "APQ8096SG" },
+ { 318, "SDM630" },
{ 321, "SDM845" },
{ 341, "SDA845" },
};
--
2.27.0
Signed-off-by: Konrad Dybcio <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 7be5de8d253f..f8a5651d498a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -23,6 +23,8 @@ PMIC's from Qualcomm.
"qcom,pmi8994-gpio"
"qcom,pmi8998-gpio"
"qcom,pms405-gpio"
+ "qcom,pm660-gpio"
+ "qcom-pm660l-gpio"
"qcom,pm8150-gpio"
"qcom,pm8150b-gpio"
"qcom,pm6150-gpio"
--
2.27.0
Add devicetree files for SDM630 SoC and its pin configuration.
This commit adds basic nodes like cpu, psci and other required
configuration for booting up from eMMC to the serial console.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm630-pins.dtsi | 268 ++++++
arch/arm64/boot/dts/qcom/sdm630.dtsi | 991 ++++++++++++++++++++++
2 files changed, 1259 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
new file mode 100644
index 000000000000..55d80458f447
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+ &tlmm {
+ blsp1_uart1_default: blsp1_uart1_default {
+ config {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ config {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_default: blsp1_uart2_default {
+ config {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_tx_active: blsp2_uart1_tx_active {
+ config {
+ pins = "gpio16";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_tx_sleep: blsp2_uart1_tx_sleep {
+ config {
+ pins = "gpio16";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ blsp2_uart1_rxcts_active: blsp2_uart1_rxcts_active {
+ config {
+ pins = "gpio17", "gpio18";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_rxcts_sleep: blsp2_uart1_rxcts_sleep {
+ config {
+ pins = "gpio17", "gpio18";
+ drive-strength = <2>;
+ bias-no-pull;
+ };
+ };
+
+ blsp2_uart1_rfr_active: blsp2_uart1_rfr_active {
+ config {
+ pins = "gpio19";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_rfr_sleep: blsp2_uart1_rfr_sleep {
+ config {
+ pins = "gpio19";
+ drive-strength = <2>;
+ bias-no-pull;
+ };
+ };
+
+ i2c1_default: i2c1_default {
+ config {
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c1_sleep: i2c1_sleep {
+ config {
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c2_default: i2c2_default {
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c3_default: i2c3_default {
+ config {
+ pins = "gpio10", "gpio11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c3_sleep: i2c3_sleep {
+ config {
+ pins = "gpio10", "gpio11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c4_default: i2c4_default {
+ config {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c4_sleep: i2c4_sleep {
+ config {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c5_default: i2c5_default {
+ config {
+ pins = "gpio18", "gpio19";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c5_sleep: i2c5_sleep {
+ config {
+ pins = "gpio18", "gpio19";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c6_default: i2c6_default {
+ config {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ config {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c7_default: i2c7_default {
+ config {
+ pins = "gpio26", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c7_sleep: i2c7_sleep {
+ config {
+ pins = "gpio26", "gpio27";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c8_default: i2c8_default {
+ config {
+ pins = "gpio30", "gpio31";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c8_sleep: i2c8_sleep {
+ config {
+ pins = "gpio30", "gpio31";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc1_clk_on: sdc1_clk_on {
+ config {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc1_clk_off: sdc1_clk_off {
+ config {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_cmd_on: sdc1_cmd_on {
+ config {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc1_cmd_off: sdc1_cmd_off {
+ config {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_data_on: sdc1_data_on {
+ config {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+
+ sdc1_data_off: sdc1_data_off {
+ config {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_rclk_on: sdc1_rclk_on {
+ config {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_rclk_off: sdc1_rclk_off {
+ config {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000000..4d714b52e3ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,991 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDM630";
+ compatible = "qcom,sdm630";
+
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ wlan_msa_guard: wlan_msa_guard@85600000 {
+ reg = <0x0 0x85600000 0x0 0x100000>;
+ no-map;
+ };
+
+ wlan_msa_mem: wlan_msa_mem@85700000 {
+ reg = <0x0 0x85700000 0x0 0x100000>;
+ no-map;
+ };
+
+ qhee_code: qhee_code@85800000 {
+ reg = <0x0 0x85800000 0x0 0x3700000>;
+ no-map;
+ };
+
+ smem_region: smem-mem@86000000 {
+ reg = <0 0x86000000 0 0x200000>;
+ no-map;
+ };
+
+ tz_mem: memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x3300000>;
+ no-map;
+ };
+
+ modem_fw_mem: modem_fw_region@8ac00000 {
+ reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+ no-map;
+ };
+
+ adsp_fw_mem: adsp_fw_region@92a00000 {
+ reg = <0x0 0x92a00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_mba_mem: pil_mba_region@94800000 {
+ reg = <0x0 0x94800000 0x0 0x200000>;
+ no-map;
+ };
+
+ buffer_mem: buffer_region@94a00000 {
+ reg = <0x0 0x94a00000 0x0 0x100000>;
+ no-map;
+ };
+
+ venus_fw_mem: venus_fw_region@9f800000 {
+ reg = <0x0 0x9f800000 0x0 0x800000>;
+ no-map;
+ };
+
+ secure_region2: secure_region2@f7c00000 {
+ reg = <0x0 0xf7c00000 0x0 0x5c00000>;
+ no-map;
+ };
+
+ adsp_mem: adsp_region@f6000000 {
+ reg = <0x0 0xf6000000 0x0 0x800000>;
+ no-map;
+ };
+
+ qseecom_ta_mem: qseecom_ta_region@fec00000 {
+ reg = <0x0 0xfec00000 0x0 0x1000000>;
+ no-map;
+ };
+
+ qseecom_mem: qseecom_region@f6800000 {
+ reg = <0x0 0xf6800000 0x0 0x1400000>;
+ no-map;
+ };
+
+ secure_display_memory: secure_region@f5c00000 {
+ reg = <0x0 0xf5c00000 0x0 0x5c00000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont_splash_region@9d400000 {
+ reg = <0x0 0x9d400000 0x0 0x23ff000>;
+ no-map;
+ };
+ };
+
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&PERF_CPU_SLEEP_0
+ &PERF_CPU_SLEEP_1
+ &PERF_CLUSTER_SLEEP_0
+ &PERF_CLUSTER_SLEEP_1
+ &PERF_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1126>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&PERF_CPU_SLEEP_0
+ &PERF_CPU_SLEEP_1
+ &PERF_CLUSTER_SLEEP_0
+ &PERF_CLUSTER_SLEEP_1
+ &PERF_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1126>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU2: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ cpu-idle-states = <&PERF_CPU_SLEEP_0
+ &PERF_CPU_SLEEP_1
+ &PERF_CLUSTER_SLEEP_0
+ &PERF_CLUSTER_SLEEP_1
+ &PERF_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1126>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU3: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ cpu-idle-states = <&PERF_CPU_SLEEP_0
+ &PERF_CPU_SLEEP_1
+ &PERF_CLUSTER_SLEEP_0
+ &PERF_CLUSTER_SLEEP_1
+ &PERF_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1126>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU4: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&PWR_CPU_SLEEP_0
+ &PWR_CPU_SLEEP_1
+ &PWR_CLUSTER_SLEEP_0
+ &PWR_CLUSTER_SLEEP_1
+ &PWR_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU5: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&PWR_CPU_SLEEP_0
+ &PWR_CPU_SLEEP_1
+ &PWR_CLUSTER_SLEEP_0
+ &PWR_CLUSTER_SLEEP_1
+ &PWR_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU6: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ cpu-idle-states = <&PWR_CPU_SLEEP_0
+ &PWR_CPU_SLEEP_1
+ &PWR_CLUSTER_SLEEP_0
+ &PWR_CLUSTER_SLEEP_1
+ &PWR_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU7: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ cpu-idle-states = <&PWR_CPU_SLEEP_0
+ &PWR_CPU_SLEEP_1
+ &PWR_CLUSTER_SLEEP_0
+ &PWR_CLUSTER_SLEEP_1
+ &PWR_CLUSTER_SLEEP_2>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "pwr-retention";
+ arm,psci-suspend-param = <0x40000002>;
+ entry-latency-us = <338>;
+ exit-latency-us = <423>;
+ min-residency-us = <200>;
+ };
+
+ PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "pwr-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <515>;
+ exit-latency-us = <1821>;
+ min-residency-us = <1000>;
+ local-timer-stop;
+ };
+
+ PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "perf-retention";
+ arm,psci-suspend-param = <0x40000002>;
+ entry-latency-us = <154>;
+ exit-latency-us = <87>;
+ min-residency-us = <200>;
+ };
+
+ PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "perf-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <262>;
+ exit-latency-us = <301>;
+ min-residency-us = <1000>;
+ local-timer-stop;
+ };
+
+ PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "pwr-cluster-dynamic-retention";
+ arm,psci-suspend-param = <0x400000F2>;
+ entry-latency-us = <284>;
+ exit-latency-us = <384>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+
+ PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "pwr-cluster-retention";
+ arm,psci-suspend-param = <0x400000F3>;
+ entry-latency-us = <338>;
+ exit-latency-us = <423>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+
+ PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+ compatible = "arm,idle-state";
+ idle-state-name = "pwr-cluster-retention";
+ arm,psci-suspend-param = <0x400000F4>;
+ entry-latency-us = <515>;
+ exit-latency-us = <1821>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+
+ PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "perf-cluster-dynamic-retention";
+ arm,psci-suspend-param = <0x400000F2>;
+ entry-latency-us = <272>;
+ exit-latency-us = <329>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+
+ PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "perf-cluster-retention";
+ arm,psci-suspend-param = <0x400000F3>;
+ entry-latency-us = <332>;
+ exit-latency-us = <368>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+
+ PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+ compatible = "arm,idle-state";
+ idle-state-name = "perf-cluster-retention";
+ arm,psci-suspend-param = <0x400000F4>;
+ entry-latency-us = <545>;
+ exit-latency-us = <1609>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8998", "qcom,scm";
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_block 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sdm660";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ smem: smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ tcsr_mutex_block: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0 0x1f40000 0 0x20000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 0xf08>,
+ <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 0 0xf08>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdm630";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x100000 0x94000>;
+
+ clock-names = "xo", "sleep_clk";
+ clocks = <&xo_board>,
+ <&sleep_clk>;
+ };
+
+ rng: rng@793000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x793000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17b00000 0x100000>; /* GICR * 8 */
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ restart@10ac000 {
+ compatible = "qcom,pshold";
+ reg = <0x10ac000 0x4>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x01f40000 0x20000>;
+ };
+
+ rpm_msg_ram: memory@778000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x778000 0x7000>;
+ };
+
+ qfprom: qfprom@780000 {
+ compatible = "qcom,qfprom";
+ reg = <0x780000 0x621c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ apcs_glb: mailbox@17911000 {
+ compatible = "qcom,msm8998-apcs-hmss-global";
+ reg = <0x17911000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ tlmm: pinctrl@3000000 {
+ compatible = "qcom,sdm630-pinctrl";
+ reg = <0x3000000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ spmi_bus: spmi@800f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0800f000 0x1000>,
+ <0x08400000 0x1000000>,
+ <0x09400000 0x1000000>,
+ <0x0a400000 0x220000>,
+ <0x0800a000 0x3000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ timer@17920000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17920000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17921000 {
+ frame-number = <0>;
+ interrupts = <0 8 0x4>,
+ <0 7 0x4>;
+ reg = <0x17921000 0x1000>,
+ <0x17922000 0x1000>;
+ };
+
+ frame@17923000 {
+ frame-number = <1>;
+ interrupts = <0 9 0x4>;
+ reg = <0x17923000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17924000 {
+ frame-number = <2>;
+ interrupts = <0 10 0x4>;
+ reg = <0x17924000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17925000 {
+ frame-number = <3>;
+ interrupts = <0 11 0x4>;
+ reg = <0x17925000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17926000 {
+ frame-number = <4>;
+ interrupts = <0 12 0x4>;
+ reg = <0x17926000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17927000 {
+ frame-number = <5>;
+ interrupts = <0 13 0x4>;
+ reg = <0x17927000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17928000 {
+ frame-number = <6>;
+ interrupts = <0 14 0x4>;
+ reg = <0x17928000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ sdhc_1: sdhci@c0c4000 {
+ compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0xc0c4000 0x1000>,
+ <0xc0c5000 0x1000>;
+ reg-names = "hc", "cqhci";
+
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+ bus-width = <8>;
+ non-removable;
+
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+
+ status = "disabled";
+ };
+
+ anoc2_smmu: iommu@16c0000 {
+ compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ reg = <0x016c0000 0x40000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <2>;
+ interrupts =
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+ <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ lpass_smmu: iommu@5100000 {
+ compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ reg = <0x5100000 0x40000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <2>;
+ interrupts =
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmss_smmu: iommu@cd00000 {
+ compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ reg = <0xcd00000 0x40000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <2>;
+ interrupts =
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ kgsl_smmu: iommu@5040000 {
+ compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ reg = <0x5040000 0x10000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <2>;
+ interrupts =
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ blsp1_dma: dma@c144000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x0c144000 0x1f000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
+ blsp2_dma: dma@c184000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0xc184000 0x1f000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <18>;
+ qcom,num-ees = <4>;
+ };
+
+ blsp_i2c1: i2c@c175000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c175000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c2: i2c@c176000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c176000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c3: i2c@c177000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c177000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_default>;
+ pinctrl-1 = <&i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c@c178000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c178000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c5: i2c@c1b5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c1b5000 0x600>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_default>;
+ pinctrl-1 = <&i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c6: i2c@c1b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c1b6000 0x600>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c7: i2c@c1b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c1b7000 0x600>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c7_default>;
+ pinctrl-1 = <&i2c7_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c8: i2c@c1b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x0c1b8000 0x600>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c8_default>;
+ pinctrl-1 = <&i2c8_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp1_uart1: serial@c16f000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc16f000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@c170000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc170000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ status = "disabled";
+ };
+
+ blsp2_uart1: serial@c1af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc1af000 0x200>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
+ &blsp2_uart1_rfr_active>;
+ pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
+ &blsp2_uart1_rfr_sleep>;
+ status = "disabled";
+ };
+ };
+};
+
+#include "sdm630-pins.dtsi"
--
2.27.0
Tested-by: Martin Botka <[email protected]>
ne 21. 6. 2020 o 23:38 Konrad Dybcio <[email protected]> napísal(a):
>
> From: Martin Botka <[email protected]>
>
> Add device tree support for the Sony Xperia 10 and 10
> Plus smartphones. They are all based on the Sony Ganges
> platform (sdm630/636) and share a lot of common code.
> The differences are really minor, so a Ganges-common DTSI
> has been created to reduce clutter.
>
> 10 - Kirin
> 10 Plus - Mermaid
>
> This platform is based on SoMC Nile, but there are some
> major differences when it comes to pin configuration and
> panel setup (among others).
>
> The boards currently support:
> * Screen console
> * SDHCI
> * I2C
> * pstore log dump
> * GPIO keys
> * PSCI idle states
>
> Signed-off-by: Martin Botka <[email protected]>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../qcom/sdm630-sony-xperia-ganges-kirin.dts | 13 +++++++
> .../dts/qcom/sdm630-sony-xperia-ganges.dtsi | 39 +++++++++++++++++++
> .../sdm636-sony-xperia-ganges-mermaid.dts | 19 +++++++++
> 4 files changed, 73 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1cad7cb07574..c98bafe03a96 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -16,9 +16,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> new file mode 100644
> index 000000000000..5326e019db20
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630-sony-xperia-ganges.dtsi"
> +
> +/ {
> + model = "SoMC Kirin-RoW";
> + compatible = "sony,kirin-row", "qcom,sdm630", "qcom,sdm630-mtp";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> new file mode 100644
> index 000000000000..6c4c30e4cd9d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +/* Ganges is very similar to Nile, but
> +there are some differences that will need
> +to be addresed when more peripherals are
> +enabled upstream. Hence the separate DTSI. */
> +#include "sdm630-sony-xperia-nile.dtsi"
> +
> +/ {
> + chosen {
> + framebuffer@9d400000 {
> + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
> + height = <2520>;
> + };
> + };
> +
> + soc {
> +
> + i2c@c175000 {
> + status = "okay";
> +
> + /* Novatek touchscreen */
> + };
> +
> + /* Yes, this is intentional.
> + Ganges devices only use gpio-keys for
> + Volume Down, but currently there's an
> + issue with it that has to be resolved.
> + Until then, let's not make the kernel panic
> + */
> + /delete-node/ gpio-keys;
> + };
> +
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
> new file mode 100644
> index 000000000000..97dce64d0185
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +/* Mermaid uses sdm636, but it's different ever so slightly
> +that we can ignore it for the time being. Sony also commonizes
> +the Ganges platform as a whole in downstream kernels. */
> +#include "sdm630-sony-xperia-ganges.dtsi"
> +
> +/ {
> + model = "SoMC Mermaid-RoW";
> + compatible = "sony,mermaid-row", "qcom,sdm636", "qcom,sdm636-mtp";
> +
> + qcom,msm-id = <345 0>;
> + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
> +};
> --
> 2.27.0
>
Tested-by: Łukasz Patron <[email protected]>
Sorry made a typo in mail.
Tested-by: Martin Botka <[email protected]>
Hi,
I also wanted to send this, but in this form:
[PATCH] soc: qcom: socinfo: Add soc information for SDM630/636/660
Add socinfo support for SDM630/636/660.
---
drivers/soc/qcom/socinfo.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 5983c6ffb078..398a3c77954e 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -202,8 +202,14 @@ static const struct soc_id soc_id[] = {
{ 310, "MSM8996AU" },
{ 311, "APQ8096AU" },
{ 312, "APQ8096SG" },
+ { 317, "SDM660" },
+ { 318, "SDM630" },
{ 321, "SDM845" },
+ { 324, "SDA660" },
+ { 327, "SDA630" },
{ 341, "SDA845" },
+ { 345, "SDM636" },
+ { 346, "SDA636" },
};
I think it would be great to have all IDs of compatible SoCs at once.
I've tested it on my sdm660 by adding some printks in probe:
[ 1.609040] socinfo: family = Snapdragon
[ 1.609043] socinfo: machine = SDM660
[ 1.619712] socinfo: soc_id = 317
[ 1.630347] socinfo: revision = 1.0
пн, 22 июн. 2020 г. в 00:40, Konrad Dybcio <[email protected]>:
>
> This patch adds missing soc ID for SDM630.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> drivers/soc/qcom/socinfo.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
> index 5983c6ffb078..705f142ee588 100644
> --- a/drivers/soc/qcom/socinfo.c
> +++ b/drivers/soc/qcom/socinfo.c
> @@ -202,6 +202,7 @@ static const struct soc_id soc_id[] = {
> { 310, "MSM8996AU" },
> { 311, "APQ8096AU" },
> { 312, "APQ8096SG" },
> + { 318, "SDM630" },
> { 321, "SDM845" },
> { 341, "SDA845" },
> };
> --
> 2.27.0
>
Parts of this are similar or identical to sdm660.dtsi. SoCs should be
very similar.
Maybe this can be reorganized, so that we have some common base between
sdm630/660. I'd like to avoid copying such large amounts of code to sdm660
.dtsi file..
пн, 22 июн. 2020 г. в 00:39, Konrad Dybcio <[email protected]>:
>
> Add devicetree files for SDM630 SoC and its pin configuration.
> This commit adds basic nodes like cpu, psci and other required
> configuration for booting up from eMMC to the serial console.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
I have almost identical patch in my working sdm660 kernel tree, maybe
this can be counted as tested by?
Tested-by: Alexey Minnekhanov <[email protected]>
пн, 22 июн. 2020 г. в 00:40, Konrad Dybcio <[email protected]>:
>
> Add rpm smd clocks, PMIC and bus clocks which are required on
> SDM630/660 (and APQ variants) for clients to vote on.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
Qualcomm keeps them separate, so there's probably a good reason to,
and I would prefer to do so as well. But if you guys really want it
merged, then it's doable I guess..
Regards
Konrad
Hi!
> +/dts-v1/;
> +
> +/* Ganges is very similar to Nile, but
> +there are some differences that will need
> +to be addresed when more peripherals are
> +enabled upstream. Hence the separate DTSI. */
This is not usual comment style.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> + soc {
> + gpio_keys {
> + status = "okay";
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
Do you really want autorepeat on keys like camera focus?
> + vol_down {
> + label = "Volume Down";
> + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
> + linux,input-type = <1>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpio-key,wakeup;
> + debounce-interval = <15>;
> + };
No volume up?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> Do you really want autorepeat on keys like camera focus?
I miiiight want to reconsider that when it will actually be in use :)
> No volume up?
On this board, vol up is managed by pm660 resin.
Regards
Konrad
> This is not usual comment style.
This was fixed in a later revision and is currently applied to
qcom/linux in the correct form. [1]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=for-next&id=234d7d6b4cbfab0e900f12658053689bb3376141
Regards
Konrad
On Mon 2020-06-29 14:15:32, Konrad Dybcio wrote:
> > Do you really want autorepeat on keys like camera focus?
>
> I miiiight want to reconsider that when it will actually be in use
> :)
Heh.
Okay, so... I want a Linux phone. I have N900 and Droid 4 at the
moment. I'll have something useful real soon now --
https://maemo-leste.github.io/maemo-leste-thirteenth-update-april-may-june-2020.html
.
OTOH... if you get useful mainline support for XA2 (or any other
modern Sony)... be sure to let me know. Droid 4 has only 1GB RAM :-(.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html