2020-06-30 22:09:37

by Ricardo Rivera-Matos

[permalink] [raw]
Subject: [PATCH v14 4/4] power: supply: bq25150 introduce the bq25150

Introduce the bq2515x family of chargers.

The BQ2515X family of devices are highly integrated battery management
ICs that integrate the most common functions for wearable devices
namely a charger, an output voltage rail, ADC for battery and system
monitoring, and a push-button controller.

Datasheets:
bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf

Signed-off-by: Ricardo Rivera-Matos <[email protected]>
---
drivers/power/supply/Kconfig | 13 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/bq2515x_charger.c | 1158 ++++++++++++++++++++++++
3 files changed, 1172 insertions(+)
create mode 100644 drivers/power/supply/bq2515x_charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 44d3c8512fb8..faf2830aa152 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -610,6 +610,19 @@ config CHARGER_BQ24735
help
Say Y to enable support for the TI BQ24735 battery charger.

+config CHARGER_BQ2515X
+ tristate "TI BQ2515X battery charger family"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ2515X family of battery
+ charging integrated circuits. The BQ2515X are highly integrated
+ battery charge management ICs that integrate the most common
+ functions for wearable devices, namely a charger, an output voltage
+ rail, ADC for battery and system monitoring, and push-button
+ controller.
+
config CHARGER_BQ25890
tristate "TI BQ25890 battery charger driver"
depends on I2C
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index b9644663e435..b3c694a65114 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
new file mode 100644
index 000000000000..f386484b5035
--- /dev/null
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -0,0 +1,1158 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ2515X Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BQ2515X_MANUFACTURER "Texas Instruments"
+
+#define BQ2515X_STAT0 0x00
+#define BQ2515X_STAT1 0x01
+#define BQ2515X_STAT2 0x02
+#define BQ2515X_FLAG0 0x03
+#define BQ2515X_FLAG1 0x04
+#define BQ2515X_FLAG2 0x05
+#define BQ2515X_FLAG3 0x06
+#define BQ2515X_MASK0 0x07
+#define BQ2515X_MASK1 0x08
+#define BQ2515X_MASK2 0x09
+#define BQ2515X_MASK3 0x0a
+#define BQ2515X_VBAT_CTRL 0x12
+#define BQ2515X_ICHG_CTRL 0x13
+#define BQ2515X_PCHRGCTRL 0x14
+#define BQ2515X_TERMCTRL 0x15
+#define BQ2515X_BUVLO 0x16
+#define BQ2515X_CHARGERCTRL0 0x17
+#define BQ2515X_CHARGERCTRL1 0x18
+#define BQ2515X_ILIMCTRL 0x19
+#define BQ2515X_LDOCTRL 0x1d
+#define BQ2515X_MRCTRL 0x30
+#define BQ2515X_ICCTRL0 0x35
+#define BQ2515X_ICCTRL1 0x36
+#define BQ2515X_ICCTRL2 0x37
+#define BQ2515X_ADCCTRL0 0x40
+#define BQ2515X_ADCCTRL1 0x41
+#define BQ2515X_ADC_VBAT_M 0x42
+#define BQ2515X_ADC_VBAT_L 0x43
+#define BQ2515X_ADC_TS_M 0x44
+#define BQ2515X_ADC_TS_L 0x45
+#define BQ2515X_ADC_ICHG_M 0x46
+#define BQ2515X_ADC_ICHG_L 0x47
+#define BQ2515X_ADC_ADCIN_M 0x48
+#define BQ2515X_ADC_ADCIN_L 0x49
+#define BQ2515X_ADC_VIN_M 0x4a
+#define BQ2515X_ADC_VIN_L 0x4b
+#define BQ2515X_ADC_PMID_M 0x4c
+#define BQ2515X_ADC_PMID_L 0x4d
+#define BQ2515X_ADC_IIN_M 0x4e
+#define BQ2515X_ADC_IIN_L 0x4f
+#define BQ2515X_ADC_COMP1_M 0x52
+#define BQ2515X_ADC_COMP1_L 0X53
+#define BQ2515X_ADC_COMP2_M 0X54
+#define BQ2515X_ADC_COMP2_L 0x55
+#define BQ2515X_ADC_COMP3_M 0x56
+#define BQ2515X_ADC_COMP3_L 0x57
+#define BQ2515X_ADC_READ_EN 0x58
+#define BQ2515X_TS_FASTCHGCTRL 0x61
+#define BQ2515X_TS_COLD 0x62
+#define BQ2515X_TS_COOL 0x63
+#define BQ2515X_TS_WARM 0x64
+#define BQ2515X_TS_HOT 0x65
+#define BQ2515X_DEVICE_ID 0x6f
+
+#define BQ2515X_DEFAULT_ICHG_UA 10000
+#define BQ25150_DEFAULT_ILIM_UA 100000
+#define BQ25155_DEFAULT_ILIM_UA 500000
+#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
+#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
+
+#define BQ2515X_DIVISOR 65536
+#define BQ2515X_VBAT_BASE_VOLT 3600000
+#define BQ2515X_VBAT_REG_MAX 4600000
+#define BQ2515X_VBAT_REG_MIN 3600000
+#define BQ2515X_VBAT_STEP_UV 10000
+#define BQ2515X_UV_FACTOR 1000000
+#define BQ2515X_VBAT_MULTIPLIER 6
+#define BQ2515X_ICHG_DIVISOR 52429
+#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
+#define BQ2515X_ICHG_MIN_UA 0
+#define BQ2515X_ICHG_MAX_UA 500000
+#define BQ2515X_ICHG_RNG_1B0_UA 1250
+#define BQ2515X_ICHG_RNG_1B1_UA 2500
+#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
+#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
+#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
+#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
+#define BQ2515X_TWAKE2_MIN_US 1700000
+#define BQ2515X_TWAKE2_MAX_US 2300000
+
+#define BQ2515X_ILIM_150MA 0x2
+#define BQ2515X_ILIM_MASK 0x7
+#define BQ2515X_ILIM_MIN 50000
+#define BQ2515X_ILIM_MAX 600000
+#define BQ2515X_HEALTH_MASK 0xf
+#define BQ2515X_ICHGRNG_MASK 0x80
+#define BQ2515X_STAT0_MASK 0x0f
+#define BQ2515X_STAT1_MASK 0x1f
+#define BQ2515X_PRECHARGE_MASK 0x1f
+
+#define BQ2515X_TS_HOT_STAT BIT(0)
+#define BQ2515X_TS_WARM_STAT BIT(1)
+#define BQ2515X_TS_COOL_STAT BIT(2)
+#define BQ2515X_TS_COLD_STAT BIT(3)
+#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
+
+#define BQ2515X_EN_VBAT_READ BIT(3)
+#define BQ2515X_EN_ICHG_READ BIT(5)
+
+#define BQ2515X_VIN_GOOD BIT(0)
+#define BQ2515X_CHRG_DONE BIT(5)
+#define BQ2515X_CV_CHRG_MODE BIT(6)
+
+#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
+
+#define BQ2515X_WATCHDOG_DISABLE BIT(4)
+
+#define BQ2515X_ICHARGE_RANGE BIT(7)
+
+#define BQ2515X_VLOWV_SEL BIT(5)
+
+#define BQ2515X_CHARGER_DISABLE BIT(0)
+
+#define BQ2515X_HWRESET_14S_WD BIT(1)
+
+static const int bq2515x_ilim_lvl_values[] = {
+ 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
+};
+
+/**
+ * struct bq2515x_init_data -
+ * @ilim: input current limit
+ */
+struct bq2515x_init_data {
+ int ilim;
+};
+
+enum bq2515x_id {
+ BQ25150,
+ BQ25155,
+};
+
+/**
+ * struct bq2515x_device -
+ * @mains: mains properties
+ * @battery: battery properties
+ * @regmap: register map structure
+ * @dev: device structure
+ *
+ * @reset_gpio: manual reset (MR) pin
+ * @powerdown_gpio: low power mode pin
+ * @ac_detect_gpio: power good (PG) pin
+ * @ce_gpio: charge enable (CE) pin
+ *
+ * @model_name: string value describing device model
+ * @device_id: value of device_id
+ * @mains_online: boolean value indicating power supply online
+ *
+ * @bq2515x_init_data init_data: charger initialization data structure
+ */
+struct bq2515x_device {
+ struct power_supply *mains;
+ struct power_supply *battery;
+ struct regmap *regmap;
+ struct device *dev;
+
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *powerdown_gpio;
+ struct gpio_desc *ac_detect_gpio;
+ struct gpio_desc *ce_gpio;
+
+ char model_name[I2C_NAME_SIZE];
+ int device_id;
+ bool mains_online;
+
+ struct bq2515x_init_data init_data;
+};
+
+static struct reg_default bq25150_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0x42},
+ {BQ2515X_ILIMCTRL, 0x1},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x0},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x20},
+};
+
+static struct reg_default bq25155_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0xC2},
+ {BQ2515X_ILIMCTRL, 0x6},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x40},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x35},
+};
+
+static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int val;
+
+ /* Read the STAT register if we can read it then the device is out
+ * of ship mode. If the register cannot be read then attempt to wake
+ * it up and enable the ADC.
+ */
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+
+ /* Need to toggle LP and bring device out of ship mode. The device
+ * will exit the ship mode when the MR pin is held low for at least
+ * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
+ */
+ gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
+
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
+ usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
+
+ return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
+ (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
+}
+
+static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
+{
+ bool dc = false;
+ unsigned int val;
+ int ret;
+
+ if (bq2515x->ac_detect_gpio)
+ val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
+ else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+ }
+
+ dc = val & BQ2515X_VIN_GOOD;
+
+ ret = bq2515x->mains_online != dc;
+
+ bq2515x->mains_online = dc;
+
+ return ret;
+}
+
+static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
+ BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_HWRESET_14S_WD, 0);
+}
+
+static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int vbat_msb;
+ int vbat_lsb;
+ uint32_t vbat_measurement;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
+ if (ret)
+ return ret;
+
+ vbat_measurement = (vbat_msb << 8) | vbat_lsb;
+
+ return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
+ BQ2515X_VBAT_MULTIPLIER;
+}
+
+static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ichg_msb;
+ int ichg_lsb;
+ uint32_t ichg_measurement;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code, reg_code;
+ unsigned int icharge_range = 0, pchrgctrl;
+ unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
+
+ if (!bq2515x->mains_online)
+ return -ENODATA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
+ if (ret)
+ return ret;
+
+ ichg_measurement = (ichg_msb << 8) | ichg_lsb;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
+ if (ret)
+ return ret;
+
+ vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
+
+ if (vlowv_sel)
+ vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
+
+ if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ &pchrgctrl);
+ if (ret)
+ return ret;
+
+ reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+ } else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
+ &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ reg_code = ichg_reg_code;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return reg_code * (ichg_multiplier * ichg_measurement /
+ BQ2515X_ICHG_DIVISOR);
+}
+
+static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ce_pin;
+ int icctrl2;
+ int charger_disable;
+
+ ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
+ if (ret)
+ return ret;
+
+ charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
+
+ if (charger_disable || ce_pin)
+ return true;
+
+ return false;
+}
+
+static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
+{
+ gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_CHARGER_DISABLE, val);
+}
+
+static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return ichg_reg_code * ichg_multiplier;
+}
+
+static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int ichg_reg_code;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int icharge_range = 0;
+
+ if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ icharge_range = BQ2515X_ICHARGE_RANGE;
+ }
+
+ bq2515x_set_charge_disable(bq2515x, 1);
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_ICHARGE_RANGE, icharge_range);
+ if (ret)
+ return ret;
+
+ ichg_reg_code = val / ichg_multiplier;
+
+ ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int precharge_reg_code;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+
+ return precharge_reg_code * precharge_multiplier;
+}
+
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ unsigned int precharge_reg_code;
+ unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range) {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ } else {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ }
+ if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ precharge_reg_code = val / precharge_multiplier;
+
+ ret = bq2515x_set_charge_disable(bq2515x, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ bool status0_no_fault;
+ bool status1_no_fault;
+ bool ce_status;
+ bool charge_done;
+ unsigned int status;
+ int ret;
+
+ if (!bq2515x->mains_online) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
+ if (ret)
+ return ret;
+
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT0 register are disbaling charging or if the charge has completed
+ * according to the CHARGE_DONE_STAT bit.
+ */
+ if (((status & BQ2515X_STAT0_MASK) == true) &
+ ((status & BQ2515X_CHRG_DONE) == false)) {
+ status0_no_fault = true;
+ charge_done = false;
+ } else if (status & BQ2515X_CHRG_DONE) {
+ charge_done = true;
+ status0_no_fault = false;
+ } else {
+ status0_no_fault = false;
+ charge_done = false;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
+ if (ret)
+ return ret;
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT1 register are disbaling charging
+ */
+ if ((status & BQ2515X_STAT1_MASK) == false)
+ status1_no_fault = true;
+ else
+ status1_no_fault = false;
+
+ ce_status = (!bq2515x_get_charge_disable(bq2515x));
+
+ /*
+ * If there are no faults and charging is enabled, then status is
+ * charging. Otherwise, if charging is complete, then status is full.
+ * Otherwise, if a fault exists or charging is disabled, then status is
+ * not charging
+ */
+ if (status0_no_fault & status1_no_fault & ce_status)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (charge_done)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (!(status0_no_fault & status1_no_fault & ce_status))
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ return 0;
+}
+
+static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
+{
+ int vbat_reg_code;
+ int ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
+ if (ret)
+ return ret;
+
+ return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
+}
+
+static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
+{
+ int vbat_reg_code;
+
+ if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
+ return -EINVAL;
+
+ vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
+
+ return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
+}
+
+static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ilimctrl;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
+ if (ret)
+ return ret;
+
+ return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
+}
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+ int i = 0;
+ unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+ for (i = array_size - 1; i > 0; i--) {
+ if (val >= bq2515x_ilim_lvl_values[i])
+ break;
+ }
+ return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
+static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property prop)
+{
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ int health = POWER_SUPPLY_HEALTH_GOOD;
+ int ret;
+ unsigned int stat1;
+ unsigned int flag3;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
+ if (ret)
+ return ret;
+
+ if (stat1 & BQ2515X_HEALTH_MASK) {
+ switch (stat1 & BQ2515X_HEALTH_MASK) {
+ case BQ2515X_TS_HOT_STAT:
+ health = POWER_SUPPLY_HEALTH_HOT;
+ break;
+ case BQ2515X_TS_WARM_STAT:
+ health = POWER_SUPPLY_HEALTH_WARM;
+ break;
+ case BQ2515X_TS_COOL_STAT:
+ health = POWER_SUPPLY_HEALTH_COOL;
+ break;
+ case BQ2515X_TS_COLD_STAT:
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+ }
+
+ if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+ if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+
+ val->intval = health;
+ return 0;
+}
+
+static int bq2515x_mains_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_battery_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_set_batt_reg(bq2515x, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_set_precharge_current(bq2515x, val->intval);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_mains_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = bq2515x->mains_online;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq2515x_charger_get_health(bq2515x, val);
+ if (ret)
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_get_ilim_lvl(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq2515x->model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ2515X_MANUFACTURER;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq2515x_charging_status(bq2515x, val);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ ret = bq2515x_update_ps_status(bq2515x);
+ if (ret)
+ return ret;
+
+ switch (prop) {
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq2515x_get_battery_voltage_now(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq2515x_get_battery_current_now(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_get_const_charge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_get_precharge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_get_batt_reg(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property bq2515x_battery_properties[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static enum power_supply_property bq2515x_mains_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static struct power_supply_desc bq2515x_mains_desc = {
+ .name = "bq2515x-mains",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = bq2515x_mains_get_property,
+ .set_property = bq2515x_mains_set_property,
+ .properties = bq2515x_mains_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static struct power_supply_desc bq2515x_battery_desc = {
+ .name = "bq2515x-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = bq2515x_battery_get_property,
+ .set_property = bq2515x_battery_set_property,
+ .properties = bq2515x_battery_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
+ struct device *dev, struct power_supply_config psy_cfg)
+{
+ bq2515x->mains = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_mains_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->mains))
+ return -EINVAL;
+
+ bq2515x->battery = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->battery))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ struct power_supply_battery_info bat_info = { };
+
+ ret = bq2515x_disable_watchdog_timers(bq2515x);
+ if (ret)
+ return ret;
+
+ if (bq2515x->init_data.ilim) {
+ ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
+ if (ret)
+ return ret;
+ }
+
+ ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
+ if (ret) {
+ dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
+
+ bat_info.constant_charge_current_max_ua =
+ BQ2515X_DEFAULT_ICHG_UA;
+
+ bat_info.constant_charge_voltage_max_uv =
+ BQ2515X_DEFAULT_VBAT_REG_UV;
+
+ bat_info.precharge_current_ua =
+ BQ2515X_DEFAULT_IPRECHARGE_UA;
+ }
+
+ ret = bq2515x_set_const_charge_current(bq2515x,
+ bat_info.constant_charge_current_max_ua);
+ if (ret)
+ return ret;
+
+ ret = bq2515x_set_batt_reg(bq2515x,
+ bat_info.constant_charge_voltage_max_uv);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_precharge_current(bq2515x,
+ bat_info.precharge_current_ua);
+}
+
+static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = device_property_read_u32(bq2515x->dev,
+ "input-current-limit-microamp",
+ &bq2515x->init_data.ilim);
+ if (ret)
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
+ break;
+ case BQ25155:
+ bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
+ break;
+ }
+
+ bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "ac-detect", GPIOD_IN);
+ if (IS_ERR(bq2515x->ac_detect_gpio)) {
+ ret = PTR_ERR(bq2515x->ac_detect_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get ac detect");
+ return ret;
+ }
+ bq2515x->ac_detect_gpio = NULL;
+ }
+
+ bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->reset_gpio)) {
+ ret = PTR_ERR(bq2515x->reset_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get reset");
+ return ret;
+ }
+ bq2515x->reset_gpio = NULL;
+ }
+
+ bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "powerdown", GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->powerdown_gpio)) {
+ ret = PTR_ERR(bq2515x->powerdown_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get powerdown");
+ return ret;
+ }
+ bq2515x->powerdown_gpio = NULL;
+ }
+
+ bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "charge-enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->ce_gpio)) {
+ ret = PTR_ERR(bq2515x->ce_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get ce");
+ return ret;
+ }
+ bq2515x->ce_gpio = NULL;
+ }
+
+ return 0;
+}
+
+static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BQ2515X_STAT0 ... BQ2515X_FLAG3:
+ case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bq25150_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25150_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static const struct regmap_config bq25155_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25155_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static int bq2515x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct bq2515x_device *bq2515x;
+ struct power_supply_config charger_cfg = {};
+ int ret;
+
+ bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
+ if (!bq2515x)
+ return -ENOMEM;
+
+ bq2515x->dev = dev;
+
+ strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
+
+ bq2515x->device_id = id->driver_data;
+
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25150_regmap_config);
+ break;
+ case BQ25155:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25155_regmap_config);
+ break;
+ }
+
+ if (IS_ERR(bq2515x->regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(bq2515x->regmap);
+ }
+
+ i2c_set_clientdata(client, bq2515x);
+
+ charger_cfg.drv_data = bq2515x;
+ charger_cfg.of_node = dev->of_node;
+
+ ret = bq2515x_read_properties(bq2515x);
+ if (ret) {
+ dev_err(dev, "Failed to read device tree properties %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
+ if (ret) {
+ dev_err(dev, "failed to register power supply\n");
+ return ret;
+ }
+
+ ret = bq2515x_hw_init(bq2515x);
+ if (ret) {
+ dev_err(dev, "Cannot initialize the chip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id bq2515x_i2c_ids[] = {
+ { "bq25150", BQ25150, },
+ { "bq25155", BQ25155, },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
+
+static const struct of_device_id bq2515x_of_match[] = {
+ { .compatible = "ti,bq25150", },
+ { .compatible = "ti,bq25155", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq2515x_of_match);
+
+static struct i2c_driver bq2515x_driver = {
+ .driver = {
+ .name = "bq2515x-charger",
+ .of_match_table = bq2515x_of_match,
+ },
+ .probe = bq2515x_probe,
+ .id_table = bq2515x_i2c_ids,
+};
+module_i2c_driver(bq2515x_driver);
+
+MODULE_AUTHOR("Dan Murphy <[email protected]>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <[email protected]>");
+MODULE_DESCRIPTION("BQ2515X charger driver");
+MODULE_LICENSE("GPL v2");
--
2.27.0


2020-06-30 23:36:34

by Sebastian Reichel

[permalink] [raw]
Subject: Re: [PATCH v14 4/4] power: supply: bq25150 introduce the bq25150

Hi,

On Tue, Jun 30, 2020 at 04:54:26PM -0500, Ricardo Rivera-Matos wrote:
> Introduce the bq2515x family of chargers.
>
> The BQ2515X family of devices are highly integrated battery management
> ICs that integrate the most common functions for wearable devices
> namely a charger, an output voltage rail, ADC for battery and system
> monitoring, and a push-button controller.
>
> Datasheets:
> bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
> bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf
>
> Signed-off-by: Ricardo Rivera-Matos <[email protected]>
> ---
> drivers/power/supply/Kconfig | 13 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/bq2515x_charger.c | 1158 ++++++++++++++++++++++++
> 3 files changed, 1172 insertions(+)
> create mode 100644 drivers/power/supply/bq2515x_charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 44d3c8512fb8..faf2830aa152 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -610,6 +610,19 @@ config CHARGER_BQ24735
> help
> Say Y to enable support for the TI BQ24735 battery charger.
>
> +config CHARGER_BQ2515X
> + tristate "TI BQ2515X battery charger family"
> + depends on I2C
> + depends on GPIOLIB || COMPILE_TEST
> + select REGMAP_I2C
> + help
> + Say Y to enable support for the TI BQ2515X family of battery
> + charging integrated circuits. The BQ2515X are highly integrated
> + battery charge management ICs that integrate the most common
> + functions for wearable devices, namely a charger, an output voltage
> + rail, ADC for battery and system monitoring, and push-button
> + controller.
> +
> config CHARGER_BQ25890
> tristate "TI BQ25890 battery charger driver"
> depends on I2C
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index b9644663e435..b3c694a65114 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
> obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
> obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
> obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
> +obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
> obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
> obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
> obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
> diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
> new file mode 100644
> index 000000000000..f386484b5035
> --- /dev/null
> +++ b/drivers/power/supply/bq2515x_charger.c
> @@ -0,0 +1,1158 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// BQ2515X Battery Charger Driver
> +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +#define BQ2515X_MANUFACTURER "Texas Instruments"
> +
> +#define BQ2515X_STAT0 0x00
> +#define BQ2515X_STAT1 0x01
> +#define BQ2515X_STAT2 0x02
> +#define BQ2515X_FLAG0 0x03
> +#define BQ2515X_FLAG1 0x04
> +#define BQ2515X_FLAG2 0x05
> +#define BQ2515X_FLAG3 0x06
> +#define BQ2515X_MASK0 0x07
> +#define BQ2515X_MASK1 0x08
> +#define BQ2515X_MASK2 0x09
> +#define BQ2515X_MASK3 0x0a
> +#define BQ2515X_VBAT_CTRL 0x12
> +#define BQ2515X_ICHG_CTRL 0x13
> +#define BQ2515X_PCHRGCTRL 0x14
> +#define BQ2515X_TERMCTRL 0x15
> +#define BQ2515X_BUVLO 0x16
> +#define BQ2515X_CHARGERCTRL0 0x17
> +#define BQ2515X_CHARGERCTRL1 0x18
> +#define BQ2515X_ILIMCTRL 0x19
> +#define BQ2515X_LDOCTRL 0x1d
> +#define BQ2515X_MRCTRL 0x30
> +#define BQ2515X_ICCTRL0 0x35
> +#define BQ2515X_ICCTRL1 0x36
> +#define BQ2515X_ICCTRL2 0x37
> +#define BQ2515X_ADCCTRL0 0x40
> +#define BQ2515X_ADCCTRL1 0x41
> +#define BQ2515X_ADC_VBAT_M 0x42
> +#define BQ2515X_ADC_VBAT_L 0x43
> +#define BQ2515X_ADC_TS_M 0x44
> +#define BQ2515X_ADC_TS_L 0x45
> +#define BQ2515X_ADC_ICHG_M 0x46
> +#define BQ2515X_ADC_ICHG_L 0x47
> +#define BQ2515X_ADC_ADCIN_M 0x48
> +#define BQ2515X_ADC_ADCIN_L 0x49
> +#define BQ2515X_ADC_VIN_M 0x4a
> +#define BQ2515X_ADC_VIN_L 0x4b
> +#define BQ2515X_ADC_PMID_M 0x4c
> +#define BQ2515X_ADC_PMID_L 0x4d
> +#define BQ2515X_ADC_IIN_M 0x4e
> +#define BQ2515X_ADC_IIN_L 0x4f
> +#define BQ2515X_ADC_COMP1_M 0x52
> +#define BQ2515X_ADC_COMP1_L 0X53
> +#define BQ2515X_ADC_COMP2_M 0X54
> +#define BQ2515X_ADC_COMP2_L 0x55
> +#define BQ2515X_ADC_COMP3_M 0x56
> +#define BQ2515X_ADC_COMP3_L 0x57
> +#define BQ2515X_ADC_READ_EN 0x58
> +#define BQ2515X_TS_FASTCHGCTRL 0x61
> +#define BQ2515X_TS_COLD 0x62
> +#define BQ2515X_TS_COOL 0x63
> +#define BQ2515X_TS_WARM 0x64
> +#define BQ2515X_TS_HOT 0x65
> +#define BQ2515X_DEVICE_ID 0x6f
> +
> +#define BQ2515X_DEFAULT_ICHG_UA 10000
> +#define BQ25150_DEFAULT_ILIM_UA 100000
> +#define BQ25155_DEFAULT_ILIM_UA 500000
> +#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
> +#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
> +
> +#define BQ2515X_DIVISOR 65536
> +#define BQ2515X_VBAT_BASE_VOLT 3600000
> +#define BQ2515X_VBAT_REG_MAX 4600000
> +#define BQ2515X_VBAT_REG_MIN 3600000
> +#define BQ2515X_VBAT_STEP_UV 10000
> +#define BQ2515X_UV_FACTOR 1000000
> +#define BQ2515X_VBAT_MULTIPLIER 6
> +#define BQ2515X_ICHG_DIVISOR 52429
> +#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
> +#define BQ2515X_ICHG_MIN_UA 0
> +#define BQ2515X_ICHG_MAX_UA 500000
> +#define BQ2515X_ICHG_RNG_1B0_UA 1250
> +#define BQ2515X_ICHG_RNG_1B1_UA 2500
> +#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
> +#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
> +#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
> +#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
> +#define BQ2515X_TWAKE2_MIN_US 1700000
> +#define BQ2515X_TWAKE2_MAX_US 2300000
> +
> +#define BQ2515X_ILIM_150MA 0x2
> +#define BQ2515X_ILIM_MASK 0x7
> +#define BQ2515X_ILIM_MIN 50000
> +#define BQ2515X_ILIM_MAX 600000
> +#define BQ2515X_HEALTH_MASK 0xf
> +#define BQ2515X_ICHGRNG_MASK 0x80
> +#define BQ2515X_STAT0_MASK 0x0f
> +#define BQ2515X_STAT1_MASK 0x1f
> +#define BQ2515X_PRECHARGE_MASK 0x1f
> +
> +#define BQ2515X_TS_HOT_STAT BIT(0)
> +#define BQ2515X_TS_WARM_STAT BIT(1)
> +#define BQ2515X_TS_COOL_STAT BIT(2)
> +#define BQ2515X_TS_COLD_STAT BIT(3)
> +#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
> +
> +#define BQ2515X_EN_VBAT_READ BIT(3)
> +#define BQ2515X_EN_ICHG_READ BIT(5)
> +
> +#define BQ2515X_VIN_GOOD BIT(0)
> +#define BQ2515X_CHRG_DONE BIT(5)
> +#define BQ2515X_CV_CHRG_MODE BIT(6)
> +
> +#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
> +
> +#define BQ2515X_WATCHDOG_DISABLE BIT(4)
> +
> +#define BQ2515X_ICHARGE_RANGE BIT(7)
> +
> +#define BQ2515X_VLOWV_SEL BIT(5)
> +
> +#define BQ2515X_CHARGER_DISABLE BIT(0)
> +
> +#define BQ2515X_HWRESET_14S_WD BIT(1)
> +
> +static const int bq2515x_ilim_lvl_values[] = {
> + 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
> +};
> +
> +/**
> + * struct bq2515x_init_data -
> + * @ilim: input current limit
> + */
> +struct bq2515x_init_data {
> + int ilim;
> +};
> +
> +enum bq2515x_id {
> + BQ25150,
> + BQ25155,
> +};
> +
> +/**
> + * struct bq2515x_device -
> + * @mains: mains properties
> + * @battery: battery properties
> + * @regmap: register map structure
> + * @dev: device structure
> + *
> + * @reset_gpio: manual reset (MR) pin
> + * @powerdown_gpio: low power mode pin
> + * @ac_detect_gpio: power good (PG) pin
> + * @ce_gpio: charge enable (CE) pin
> + *
> + * @model_name: string value describing device model
> + * @device_id: value of device_id
> + * @mains_online: boolean value indicating power supply online
> + *
> + * @bq2515x_init_data init_data: charger initialization data structure
> + */
> +struct bq2515x_device {
> + struct power_supply *mains;
> + struct power_supply *battery;
> + struct regmap *regmap;
> + struct device *dev;
> +
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *powerdown_gpio;
> + struct gpio_desc *ac_detect_gpio;
> + struct gpio_desc *ce_gpio;
> +
> + char model_name[I2C_NAME_SIZE];
> + int device_id;
> + bool mains_online;
> +
> + struct bq2515x_init_data init_data;
> +};
> +
> +static struct reg_default bq25150_reg_defaults[] = {
> + {BQ2515X_FLAG0, 0x0},
> + {BQ2515X_FLAG1, 0x0},
> + {BQ2515X_FLAG2, 0x0},
> + {BQ2515X_FLAG3, 0x0},
> + {BQ2515X_MASK0, 0x0},
> + {BQ2515X_MASK1, 0x0},
> + {BQ2515X_MASK2, 0x71},
> + {BQ2515X_MASK3, 0x0},
> + {BQ2515X_VBAT_CTRL, 0x3C},
> + {BQ2515X_ICHG_CTRL, 0x8},
> + {BQ2515X_PCHRGCTRL, 0x2},
> + {BQ2515X_TERMCTRL, 0x14},
> + {BQ2515X_BUVLO, 0x0},
> + {BQ2515X_CHARGERCTRL0, 0x82},
> + {BQ2515X_CHARGERCTRL1, 0x42},
> + {BQ2515X_ILIMCTRL, 0x1},
> + {BQ2515X_LDOCTRL, 0xB0},
> + {BQ2515X_MRCTRL, 0x2A},
> + {BQ2515X_ICCTRL0, 0x10},
> + {BQ2515X_ICCTRL1, 0x0},
> + {BQ2515X_ICCTRL2, 0x0},
> + {BQ2515X_ADCCTRL0, 0x2},
> + {BQ2515X_ADCCTRL1, 0x40},
> + {BQ2515X_ADC_COMP1_M, 0x23},
> + {BQ2515X_ADC_COMP1_L, 0x20},
> + {BQ2515X_ADC_COMP2_M, 0x38},
> + {BQ2515X_ADC_COMP2_L, 0x90},
> + {BQ2515X_ADC_COMP3_M, 0x0},
> + {BQ2515X_ADC_COMP3_L, 0x0},
> + {BQ2515X_ADC_READ_EN, 0x0},
> + {BQ2515X_TS_FASTCHGCTRL, 0x34},
> + {BQ2515X_TS_COLD, 0x7C},
> + {BQ2515X_TS_COOL, 0x6D},
> + {BQ2515X_TS_WARM, 0x38},
> + {BQ2515X_TS_HOT, 0x27},
> + {BQ2515X_DEVICE_ID, 0x20},
> +};
> +
> +static struct reg_default bq25155_reg_defaults[] = {
> + {BQ2515X_FLAG0, 0x0},
> + {BQ2515X_FLAG1, 0x0},
> + {BQ2515X_FLAG2, 0x0},
> + {BQ2515X_FLAG3, 0x0},
> + {BQ2515X_MASK0, 0x0},
> + {BQ2515X_MASK1, 0x0},
> + {BQ2515X_MASK2, 0x71},
> + {BQ2515X_MASK3, 0x0},
> + {BQ2515X_VBAT_CTRL, 0x3C},
> + {BQ2515X_ICHG_CTRL, 0x8},
> + {BQ2515X_PCHRGCTRL, 0x2},
> + {BQ2515X_TERMCTRL, 0x14},
> + {BQ2515X_BUVLO, 0x0},
> + {BQ2515X_CHARGERCTRL0, 0x82},
> + {BQ2515X_CHARGERCTRL1, 0xC2},
> + {BQ2515X_ILIMCTRL, 0x6},
> + {BQ2515X_LDOCTRL, 0xB0},
> + {BQ2515X_MRCTRL, 0x2A},
> + {BQ2515X_ICCTRL0, 0x10},
> + {BQ2515X_ICCTRL1, 0x0},
> + {BQ2515X_ICCTRL2, 0x40},
> + {BQ2515X_ADCCTRL0, 0x2},
> + {BQ2515X_ADCCTRL1, 0x40},
> + {BQ2515X_ADC_COMP1_M, 0x23},
> + {BQ2515X_ADC_COMP1_L, 0x20},
> + {BQ2515X_ADC_COMP2_M, 0x38},
> + {BQ2515X_ADC_COMP2_L, 0x90},
> + {BQ2515X_ADC_COMP3_M, 0x0},
> + {BQ2515X_ADC_COMP3_L, 0x0},
> + {BQ2515X_ADC_READ_EN, 0x0},
> + {BQ2515X_TS_FASTCHGCTRL, 0x34},
> + {BQ2515X_TS_COLD, 0x7C},
> + {BQ2515X_TS_COOL, 0x6D},
> + {BQ2515X_TS_WARM, 0x38},
> + {BQ2515X_TS_HOT, 0x27},
> + {BQ2515X_DEVICE_ID, 0x35},
> +};
> +
> +static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + int val;
> +
> + /* Read the STAT register if we can read it then the device is out
> + * of ship mode. If the register cannot be read then attempt to wake
> + * it up and enable the ADC.
> + */
> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
> + if (ret)
> + return ret;
> +
> + /* Need to toggle LP and bring device out of ship mode. The device
> + * will exit the ship mode when the MR pin is held low for at least
> + * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
> + */
> + gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
> +
> + gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
> + usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
> + gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
> +
> + return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
> + (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
> +}
> +
> +static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
> +{
> + bool dc = false;
> + unsigned int val;
> + int ret;
> +
> + if (bq2515x->ac_detect_gpio)
> + val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
> + else {
> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
> + if (ret)
> + return ret;
> + }
> +
> + dc = val & BQ2515X_VIN_GOOD;
> +
> + ret = bq2515x->mains_online != dc;
> +
> + bq2515x->mains_online = dc;
> +
> + return ret;
> +}
> +
> +static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
> + BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
> + if (ret)
> + return ret;
> +
> + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
> + BQ2515X_HWRESET_14S_WD, 0);
> +}
> +
> +static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + int vbat_msb;
> + int vbat_lsb;
> + uint32_t vbat_measurement;
> +
> + if (!bq2515x->mains_online)
> + bq2515x_wake_up(bq2515x);
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
> + if (ret)
> + return ret;
> +
> + vbat_measurement = (vbat_msb << 8) | vbat_lsb;
> +
> + return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
> + BQ2515X_VBAT_MULTIPLIER;
> +}
> +
> +static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + int ichg_msb;
> + int ichg_lsb;
> + uint32_t ichg_measurement;
> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + unsigned int ichg_reg_code, reg_code;
> + unsigned int icharge_range = 0, pchrgctrl;
> + unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
> +
> + if (!bq2515x->mains_online)
> + return -ENODATA;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
> + if (ret)
> + return ret;
> +
> + ichg_measurement = (ichg_msb << 8) | ichg_lsb;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
> + if (ret)
> + return ret;
> +
> + vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
> +
> + if (vlowv_sel)
> + vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
> +
> + if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
> + &pchrgctrl);
> + if (ret)
> + return ret;
> +
> + reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
> + } else {
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
> + &ichg_reg_code);
> + if (ret)
> + return ret;
> +
> + reg_code = ichg_reg_code;
> + }
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
> + if (ret)
> + return ret;
> +
> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
> +
> + if (icharge_range)
> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
> +
> + return reg_code * (ichg_multiplier * ichg_measurement /
> + BQ2515X_ICHG_DIVISOR);
> +}
> +
> +static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + int ce_pin;
> + int icctrl2;
> + int charger_disable;
> +
> + ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
> + if (ret)
> + return ret;
> +
> + charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
> +
> + if (charger_disable || ce_pin)
> + return true;
> +
> + return false;
> +}
> +
> +static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
> +{
> + gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
> +
> + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
> + BQ2515X_CHARGER_DISABLE, val);
> +}
> +
> +static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + unsigned int ichg_reg_code;
> + unsigned int pchrgctrl;
> + unsigned int icharge_range;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
> + if (ret)
> + return ret;
> +
> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
> +
> + if (icharge_range)
> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
> +
> + return ichg_reg_code * ichg_multiplier;
> +}
> +
> +static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
> + int val)
> +{
> + int ret;
> + unsigned int ichg_reg_code;
> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + unsigned int icharge_range = 0;
> +
> + if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
> + return -EINVAL;
> +
> + if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
> + icharge_range = BQ2515X_ICHARGE_RANGE;
> + }
> +
> + bq2515x_set_charge_disable(bq2515x, 1);
> +
> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
> + BQ2515X_ICHARGE_RANGE, icharge_range);
> + if (ret)
> + return ret;
> +
> + ichg_reg_code = val / ichg_multiplier;
> +
> + ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
> + if (ret)
> + return ret;
> +
> + return bq2515x_set_charge_disable(bq2515x, 0);
> +}
> +
> +static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + unsigned int pchrgctrl;
> + unsigned int icharge_range;
> + u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + unsigned int precharge_reg_code;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
> + if (ret)
> + return ret;
> +
> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
> +
> + if (icharge_range)
> + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
> +
> + precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
> +
> + return precharge_reg_code * precharge_multiplier;
> +}
> +
> +static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
> + int val)
> +{
> + int ret;
> + unsigned int pchrgctrl;
> + unsigned int icharge_range;
> + unsigned int precharge_reg_code;
> + unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
> + if (ret)
> + return ret;
> +
> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
> +
> + if (icharge_range) {
> + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
> + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
> + } else {
> + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
> + precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
> + }
> + if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
> + return -EINVAL;
> +
> + precharge_reg_code = val / precharge_multiplier;
> +
> + ret = bq2515x_set_charge_disable(bq2515x, 1);
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
> + BQ2515X_PRECHARGE_MASK, precharge_reg_code);
> + if (ret)
> + return ret;
> +
> + return bq2515x_set_charge_disable(bq2515x, 0);
> +}
> +
> +static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
> + union power_supply_propval *val)
> +{
> + bool status0_no_fault;
> + bool status1_no_fault;
> + bool ce_status;
> + bool charge_done;
> + unsigned int status;
> + int ret;
> +
> + if (!bq2515x->mains_online) {
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + return 0;
> + }
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
> + if (ret)
> + return ret;
> +
> + /*
> + * The code block below is used to determine if any faults from the
> + * STAT0 register are disbaling charging or if the charge has completed
> + * according to the CHARGE_DONE_STAT bit.
> + */
> + if (((status & BQ2515X_STAT0_MASK) == true) &
> + ((status & BQ2515X_CHRG_DONE) == false)) {
> + status0_no_fault = true;
> + charge_done = false;
> + } else if (status & BQ2515X_CHRG_DONE) {
> + charge_done = true;
> + status0_no_fault = false;
> + } else {
> + status0_no_fault = false;
> + charge_done = false;
> + }
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
> + if (ret)
> + return ret;
> + /*
> + * The code block below is used to determine if any faults from the
> + * STAT1 register are disbaling charging
> + */
> + if ((status & BQ2515X_STAT1_MASK) == false)
> + status1_no_fault = true;
> + else
> + status1_no_fault = false;
> +
> + ce_status = (!bq2515x_get_charge_disable(bq2515x));
> +
> + /*
> + * If there are no faults and charging is enabled, then status is
> + * charging. Otherwise, if charging is complete, then status is full.
> + * Otherwise, if a fault exists or charging is disabled, then status is
> + * not charging
> + */
> + if (status0_no_fault & status1_no_fault & ce_status)
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + else if (charge_done)
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + else if (!(status0_no_fault & status1_no_fault & ce_status))
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> +
> + return 0;
> +}
> +
> +static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
> +{
> + int vbat_reg_code;
> + int ret;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
> + if (ret)
> + return ret;
> +
> + return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
> +}
> +
> +static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
> +{
> + int vbat_reg_code;
> +
> + if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
> + return -EINVAL;
> +
> + vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
> +
> + return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
> +}
> +
> +static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + int ilimctrl;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
> + if (ret)
> + return ret;
> +
> + return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
> +}
> +
> +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
> +{
> + int i = 0;
> + unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
> +
> + for (i = array_size - 1; i > 0; i--) {
> + if (val >= bq2515x_ilim_lvl_values[i])
> + break;
> + }
> + return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
> +}
> +
> +static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property prop)
> +{
> + switch (prop) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
> + union power_supply_propval *val)
> +{
> + int health = POWER_SUPPLY_HEALTH_GOOD;
> + int ret;
> + unsigned int stat1;
> + unsigned int flag3;
> +
> + if (!bq2515x->mains_online)
> + bq2515x_wake_up(bq2515x);
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
> + if (ret)
> + return ret;
> +
> + if (stat1 & BQ2515X_HEALTH_MASK) {
> + switch (stat1 & BQ2515X_HEALTH_MASK) {
> + case BQ2515X_TS_HOT_STAT:
> + health = POWER_SUPPLY_HEALTH_HOT;
> + break;
> + case BQ2515X_TS_WARM_STAT:
> + health = POWER_SUPPLY_HEALTH_WARM;
> + break;
> + case BQ2515X_TS_COOL_STAT:
> + health = POWER_SUPPLY_HEALTH_COOL;
> + break;
> + case BQ2515X_TS_COLD_STAT:
> + health = POWER_SUPPLY_HEALTH_COLD;
> + break;
> + default:
> + health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + break;
> + }
> + }
> +
> + if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
> + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> +
> + if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
> + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
> +
> + val->intval = health;
> + return 0;
> +}
> +
> +static int bq2515x_mains_set_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + const union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret;
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int bq2515x_battery_set_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + const union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret;
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq2515x_set_batt_reg(bq2515x, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = bq2515x_set_precharge_current(bq2515x, val->intval);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}

Expose those through the charger device. The battery device
can expose maximum data (e.g. POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX),
but should not control the charging itself.

> +static int bq2515x_mains_get_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret = 0;
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = bq2515x->mains_online;
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + ret = bq2515x_charger_get_health(bq2515x, val);
> + if (ret)
> + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = bq2515x_get_ilim_lvl(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = bq2515x->model_name;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = BQ2515X_MANUFACTURER;
> + break;
> + case POWER_SUPPLY_PROP_STATUS:
> + ret = bq2515x_charging_status(bq2515x, val);
> + if (ret)
> + return ret;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int bq2515x_battery_get_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret;
> +
> + ret = bq2515x_update_ps_status(bq2515x);
> + if (ret)
> + return ret;
> +
> + switch (prop) {
> +
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = bq2515x_get_battery_voltage_now(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + ret = bq2515x_get_battery_current_now(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq2515x_get_const_charge_current(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = bq2515x_get_precharge_current(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq2515x_get_batt_reg(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static enum power_supply_property bq2515x_battery_properties[] = {
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> +};
> +
> +static enum power_supply_property bq2515x_mains_properties[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> +static struct power_supply_desc bq2515x_mains_desc = {
> + .name = "bq2515x-mains",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .get_property = bq2515x_mains_get_property,
> + .set_property = bq2515x_mains_set_property,
> + .properties = bq2515x_mains_properties,
> + .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
> +};
> +
> +static struct power_supply_desc bq2515x_battery_desc = {
> + .name = "bq2515x-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .get_property = bq2515x_battery_get_property,
> + .set_property = bq2515x_battery_set_property,
> + .properties = bq2515x_battery_properties,
> + .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
> +};
> +
> +static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
> + struct device *dev, struct power_supply_config psy_cfg)
> +{
> + bq2515x->mains = devm_power_supply_register(bq2515x->dev,
> + &bq2515x_mains_desc,
> + &psy_cfg);
> + if (IS_ERR(bq2515x->mains))
> + return -EINVAL;
> +
> + bq2515x->battery = devm_power_supply_register(bq2515x->dev,
> + &bq2515x_battery_desc,
> + &psy_cfg);
> + if (IS_ERR(bq2515x->battery))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + struct power_supply_battery_info bat_info = { };
> +
> + ret = bq2515x_disable_watchdog_timers(bq2515x);
> + if (ret)
> + return ret;
> +
> + if (bq2515x->init_data.ilim) {
> + ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
> + if (ret)
> + return ret;
> + }
> +
> + ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
> + if (ret) {
> + dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
> +
> + bat_info.constant_charge_current_max_ua =
> + BQ2515X_DEFAULT_ICHG_UA;
> +
> + bat_info.constant_charge_voltage_max_uv =
> + BQ2515X_DEFAULT_VBAT_REG_UV;
> +
> + bat_info.precharge_current_ua =
> + BQ2515X_DEFAULT_IPRECHARGE_UA;
> + }
> +
> + ret = bq2515x_set_const_charge_current(bq2515x,
> + bat_info.constant_charge_current_max_ua);
> + if (ret)
> + return ret;
> +
> + ret = bq2515x_set_batt_reg(bq2515x,
> + bat_info.constant_charge_voltage_max_uv);
> + if (ret)
> + return ret;
> +
> + return bq2515x_set_precharge_current(bq2515x,
> + bat_info.precharge_current_ua);
> +}
> +
> +static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> +
> + ret = device_property_read_u32(bq2515x->dev,
> + "input-current-limit-microamp",
> + &bq2515x->init_data.ilim);
> + if (ret)
> + switch (bq2515x->device_id) {
> + case BQ25150:
> + bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
> + break;
> + case BQ25155:
> + bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
> + break;
> + }

Please add {} for the if.

> + bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "ac-detect", GPIOD_IN);
> + if (IS_ERR(bq2515x->ac_detect_gpio)) {
> + ret = PTR_ERR(bq2515x->ac_detect_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get ac detect");
> + return ret;
> + }
> + bq2515x->ac_detect_gpio = NULL;

All of this is not needed. If no GPIO is specified,
devm_gpiod_get_optional() will return NULL instead
of an error code. This is enough:

if (IS_ERR(bq2515x->ac_detect_gpio)) {
ret = PTR_ERR(bq2515x->ac_detect_gpio);
dev_err(bq2515x->dev, "Failed to get ac detect: %d\n", ret);
return ret;
}

> + }
> +
> + bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->reset_gpio)) {
> + ret = PTR_ERR(bq2515x->reset_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get reset");
> + return ret;
> + }
> + bq2515x->reset_gpio = NULL;
> + }

The same as previous GPIO.

> + bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "powerdown", GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->powerdown_gpio)) {
> + ret = PTR_ERR(bq2515x->powerdown_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get powerdown");
> + return ret;
> + }
> + bq2515x->powerdown_gpio = NULL;
> + }

The same as previous GPIO.

> + bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "charge-enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->ce_gpio)) {
> + ret = PTR_ERR(bq2515x->ce_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get ce");
> + return ret;
> + }
> + bq2515x->ce_gpio = NULL;
> + }

The same as previous GPIO.

> + return 0;
> +}
> +
> +static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case BQ2515X_STAT0 ... BQ2515X_FLAG3:
> + case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config bq25150_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = BQ2515X_DEVICE_ID,
> + .reg_defaults = bq25150_reg_defaults,
> + .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = bq2515x_volatile_register,
> +};
> +
> +static const struct regmap_config bq25155_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = BQ2515X_DEVICE_ID,
> + .reg_defaults = bq25155_reg_defaults,
> + .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = bq2515x_volatile_register,
> +};
> +
> +static int bq2515x_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct bq2515x_device *bq2515x;
> + struct power_supply_config charger_cfg = {};
> + int ret;
> +
> + bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
> + if (!bq2515x)
> + return -ENOMEM;
> +
> + bq2515x->dev = dev;
> +
> + strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
> +
> + bq2515x->device_id = id->driver_data;
> +
> + switch (bq2515x->device_id) {
> + case BQ25150:
> + bq2515x->regmap = devm_regmap_init_i2c(client,
> + &bq25150_regmap_config);
> + break;
> + case BQ25155:
> + bq2515x->regmap = devm_regmap_init_i2c(client,
> + &bq25155_regmap_config);
> + break;
> + }
> +
> + if (IS_ERR(bq2515x->regmap)) {
> + dev_err(dev, "failed to allocate register map\n");
> + return PTR_ERR(bq2515x->regmap);
> + }
> +
> + i2c_set_clientdata(client, bq2515x);
> +
> + charger_cfg.drv_data = bq2515x;
> + charger_cfg.of_node = dev->of_node;
> +
> + ret = bq2515x_read_properties(bq2515x);
> + if (ret) {
> + dev_err(dev, "Failed to read device tree properties %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
> + if (ret) {
> + dev_err(dev, "failed to register power supply\n");
> + return ret;
> + }
> +
> + ret = bq2515x_hw_init(bq2515x);
> + if (ret) {
> + dev_err(dev, "Cannot initialize the chip\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id bq2515x_i2c_ids[] = {
> + { "bq25150", BQ25150, },
> + { "bq25155", BQ25155, },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
> +
> +static const struct of_device_id bq2515x_of_match[] = {
> + { .compatible = "ti,bq25150", },
> + { .compatible = "ti,bq25155", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bq2515x_of_match);
> +
> +static struct i2c_driver bq2515x_driver = {
> + .driver = {
> + .name = "bq2515x-charger",
> + .of_match_table = bq2515x_of_match,
> + },
> + .probe = bq2515x_probe,
> + .id_table = bq2515x_i2c_ids,
> +};
> +module_i2c_driver(bq2515x_driver);
> +
> +MODULE_AUTHOR("Dan Murphy <[email protected]>");
> +MODULE_AUTHOR("Ricardo Rivera-Matos <[email protected]>");
> +MODULE_DESCRIPTION("BQ2515X charger driver");
> +MODULE_LICENSE("GPL v2");

Otherwise this looks good to me now. I hope I can merge the next
version :)

-- Sebastian


Attachments:
(No filename) (36.49 kB)
signature.asc (849.00 B)
Download all attachments

2020-07-01 04:18:51

by Ricardo Rivera-Matos

[permalink] [raw]
Subject: Re: [EXTERNAL] Re: [PATCH v14 4/4] power: supply: bq25150 introduce the bq25150


On 6/30/20 6:33 PM, Sebastian Reichel wrote:
> Hi,
>
> On Tue, Jun 30, 2020 at 04:54:26PM -0500, Ricardo Rivera-Matos wrote:
>> Introduce the bq2515x family of chargers.
>>
>> The BQ2515X family of devices are highly integrated battery management
>> ICs that integrate the most common functions for wearable devices
>> namely a charger, an output voltage rail, ADC for battery and system
>> monitoring, and a push-button controller.
>>
>> Datasheets:
>> bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
>> bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf
>>
>> Signed-off-by: Ricardo Rivera-Matos <[email protected]>
>> ---
>> drivers/power/supply/Kconfig | 13 +
>> drivers/power/supply/Makefile | 1 +
>> drivers/power/supply/bq2515x_charger.c | 1158 ++++++++++++++++++++++++
>> 3 files changed, 1172 insertions(+)
>> create mode 100644 drivers/power/supply/bq2515x_charger.c
>>
>> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
>> index 44d3c8512fb8..faf2830aa152 100644
>> --- a/drivers/power/supply/Kconfig
>> +++ b/drivers/power/supply/Kconfig
>> @@ -610,6 +610,19 @@ config CHARGER_BQ24735
>> help
>> Say Y to enable support for the TI BQ24735 battery charger.
>>
>> +config CHARGER_BQ2515X
>> + tristate "TI BQ2515X battery charger family"
>> + depends on I2C
>> + depends on GPIOLIB || COMPILE_TEST
>> + select REGMAP_I2C
>> + help
>> + Say Y to enable support for the TI BQ2515X family of battery
>> + charging integrated circuits. The BQ2515X are highly integrated
>> + battery charge management ICs that integrate the most common
>> + functions for wearable devices, namely a charger, an output voltage
>> + rail, ADC for battery and system monitoring, and push-button
>> + controller.
>> +
>> config CHARGER_BQ25890
>> tristate "TI BQ25890 battery charger driver"
>> depends on I2C
>> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
>> index b9644663e435..b3c694a65114 100644
>> --- a/drivers/power/supply/Makefile
>> +++ b/drivers/power/supply/Makefile
>> @@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
>> obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
>> obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
>> obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
>> +obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
>> obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
>> obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
>> obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
>> diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
>> new file mode 100644
>> index 000000000000..f386484b5035
>> --- /dev/null
>> +++ b/drivers/power/supply/bq2515x_charger.c
>> @@ -0,0 +1,1158 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// BQ2515X Battery Charger Driver
>> +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/err.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/power_supply.h>
>> +#include <linux/regmap.h>
>> +#include <linux/types.h>
>> +
>> +#define BQ2515X_MANUFACTURER "Texas Instruments"
>> +
>> +#define BQ2515X_STAT0 0x00
>> +#define BQ2515X_STAT1 0x01
>> +#define BQ2515X_STAT2 0x02
>> +#define BQ2515X_FLAG0 0x03
>> +#define BQ2515X_FLAG1 0x04
>> +#define BQ2515X_FLAG2 0x05
>> +#define BQ2515X_FLAG3 0x06
>> +#define BQ2515X_MASK0 0x07
>> +#define BQ2515X_MASK1 0x08
>> +#define BQ2515X_MASK2 0x09
>> +#define BQ2515X_MASK3 0x0a
>> +#define BQ2515X_VBAT_CTRL 0x12
>> +#define BQ2515X_ICHG_CTRL 0x13
>> +#define BQ2515X_PCHRGCTRL 0x14
>> +#define BQ2515X_TERMCTRL 0x15
>> +#define BQ2515X_BUVLO 0x16
>> +#define BQ2515X_CHARGERCTRL0 0x17
>> +#define BQ2515X_CHARGERCTRL1 0x18
>> +#define BQ2515X_ILIMCTRL 0x19
>> +#define BQ2515X_LDOCTRL 0x1d
>> +#define BQ2515X_MRCTRL 0x30
>> +#define BQ2515X_ICCTRL0 0x35
>> +#define BQ2515X_ICCTRL1 0x36
>> +#define BQ2515X_ICCTRL2 0x37
>> +#define BQ2515X_ADCCTRL0 0x40
>> +#define BQ2515X_ADCCTRL1 0x41
>> +#define BQ2515X_ADC_VBAT_M 0x42
>> +#define BQ2515X_ADC_VBAT_L 0x43
>> +#define BQ2515X_ADC_TS_M 0x44
>> +#define BQ2515X_ADC_TS_L 0x45
>> +#define BQ2515X_ADC_ICHG_M 0x46
>> +#define BQ2515X_ADC_ICHG_L 0x47
>> +#define BQ2515X_ADC_ADCIN_M 0x48
>> +#define BQ2515X_ADC_ADCIN_L 0x49
>> +#define BQ2515X_ADC_VIN_M 0x4a
>> +#define BQ2515X_ADC_VIN_L 0x4b
>> +#define BQ2515X_ADC_PMID_M 0x4c
>> +#define BQ2515X_ADC_PMID_L 0x4d
>> +#define BQ2515X_ADC_IIN_M 0x4e
>> +#define BQ2515X_ADC_IIN_L 0x4f
>> +#define BQ2515X_ADC_COMP1_M 0x52
>> +#define BQ2515X_ADC_COMP1_L 0X53
>> +#define BQ2515X_ADC_COMP2_M 0X54
>> +#define BQ2515X_ADC_COMP2_L 0x55
>> +#define BQ2515X_ADC_COMP3_M 0x56
>> +#define BQ2515X_ADC_COMP3_L 0x57
>> +#define BQ2515X_ADC_READ_EN 0x58
>> +#define BQ2515X_TS_FASTCHGCTRL 0x61
>> +#define BQ2515X_TS_COLD 0x62
>> +#define BQ2515X_TS_COOL 0x63
>> +#define BQ2515X_TS_WARM 0x64
>> +#define BQ2515X_TS_HOT 0x65
>> +#define BQ2515X_DEVICE_ID 0x6f
>> +
>> +#define BQ2515X_DEFAULT_ICHG_UA 10000
>> +#define BQ25150_DEFAULT_ILIM_UA 100000
>> +#define BQ25155_DEFAULT_ILIM_UA 500000
>> +#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
>> +#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
>> +
>> +#define BQ2515X_DIVISOR 65536
>> +#define BQ2515X_VBAT_BASE_VOLT 3600000
>> +#define BQ2515X_VBAT_REG_MAX 4600000
>> +#define BQ2515X_VBAT_REG_MIN 3600000
>> +#define BQ2515X_VBAT_STEP_UV 10000
>> +#define BQ2515X_UV_FACTOR 1000000
>> +#define BQ2515X_VBAT_MULTIPLIER 6
>> +#define BQ2515X_ICHG_DIVISOR 52429
>> +#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
>> +#define BQ2515X_ICHG_MIN_UA 0
>> +#define BQ2515X_ICHG_MAX_UA 500000
>> +#define BQ2515X_ICHG_RNG_1B0_UA 1250
>> +#define BQ2515X_ICHG_RNG_1B1_UA 2500
>> +#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
>> +#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
>> +#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
>> +#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
>> +#define BQ2515X_TWAKE2_MIN_US 1700000
>> +#define BQ2515X_TWAKE2_MAX_US 2300000
>> +
>> +#define BQ2515X_ILIM_150MA 0x2
>> +#define BQ2515X_ILIM_MASK 0x7
>> +#define BQ2515X_ILIM_MIN 50000
>> +#define BQ2515X_ILIM_MAX 600000
>> +#define BQ2515X_HEALTH_MASK 0xf
>> +#define BQ2515X_ICHGRNG_MASK 0x80
>> +#define BQ2515X_STAT0_MASK 0x0f
>> +#define BQ2515X_STAT1_MASK 0x1f
>> +#define BQ2515X_PRECHARGE_MASK 0x1f
>> +
>> +#define BQ2515X_TS_HOT_STAT BIT(0)
>> +#define BQ2515X_TS_WARM_STAT BIT(1)
>> +#define BQ2515X_TS_COOL_STAT BIT(2)
>> +#define BQ2515X_TS_COLD_STAT BIT(3)
>> +#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
>> +
>> +#define BQ2515X_EN_VBAT_READ BIT(3)
>> +#define BQ2515X_EN_ICHG_READ BIT(5)
>> +
>> +#define BQ2515X_VIN_GOOD BIT(0)
>> +#define BQ2515X_CHRG_DONE BIT(5)
>> +#define BQ2515X_CV_CHRG_MODE BIT(6)
>> +
>> +#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
>> +
>> +#define BQ2515X_WATCHDOG_DISABLE BIT(4)
>> +
>> +#define BQ2515X_ICHARGE_RANGE BIT(7)
>> +
>> +#define BQ2515X_VLOWV_SEL BIT(5)
>> +
>> +#define BQ2515X_CHARGER_DISABLE BIT(0)
>> +
>> +#define BQ2515X_HWRESET_14S_WD BIT(1)
>> +
>> +static const int bq2515x_ilim_lvl_values[] = {
>> + 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
>> +};
>> +
>> +/**
>> + * struct bq2515x_init_data -
>> + * @ilim: input current limit
>> + */
>> +struct bq2515x_init_data {
>> + int ilim;
>> +};
>> +
>> +enum bq2515x_id {
>> + BQ25150,
>> + BQ25155,
>> +};
>> +
>> +/**
>> + * struct bq2515x_device -
>> + * @mains: mains properties
>> + * @battery: battery properties
>> + * @regmap: register map structure
>> + * @dev: device structure
>> + *
>> + * @reset_gpio: manual reset (MR) pin
>> + * @powerdown_gpio: low power mode pin
>> + * @ac_detect_gpio: power good (PG) pin
>> + * @ce_gpio: charge enable (CE) pin
>> + *
>> + * @model_name: string value describing device model
>> + * @device_id: value of device_id
>> + * @mains_online: boolean value indicating power supply online
>> + *
>> + * @bq2515x_init_data init_data: charger initialization data structure
>> + */
>> +struct bq2515x_device {
>> + struct power_supply *mains;
>> + struct power_supply *battery;
>> + struct regmap *regmap;
>> + struct device *dev;
>> +
>> + struct gpio_desc *reset_gpio;
>> + struct gpio_desc *powerdown_gpio;
>> + struct gpio_desc *ac_detect_gpio;
>> + struct gpio_desc *ce_gpio;
>> +
>> + char model_name[I2C_NAME_SIZE];
>> + int device_id;
>> + bool mains_online;
>> +
>> + struct bq2515x_init_data init_data;
>> +};
>> +
>> +static struct reg_default bq25150_reg_defaults[] = {
>> + {BQ2515X_FLAG0, 0x0},
>> + {BQ2515X_FLAG1, 0x0},
>> + {BQ2515X_FLAG2, 0x0},
>> + {BQ2515X_FLAG3, 0x0},
>> + {BQ2515X_MASK0, 0x0},
>> + {BQ2515X_MASK1, 0x0},
>> + {BQ2515X_MASK2, 0x71},
>> + {BQ2515X_MASK3, 0x0},
>> + {BQ2515X_VBAT_CTRL, 0x3C},
>> + {BQ2515X_ICHG_CTRL, 0x8},
>> + {BQ2515X_PCHRGCTRL, 0x2},
>> + {BQ2515X_TERMCTRL, 0x14},
>> + {BQ2515X_BUVLO, 0x0},
>> + {BQ2515X_CHARGERCTRL0, 0x82},
>> + {BQ2515X_CHARGERCTRL1, 0x42},
>> + {BQ2515X_ILIMCTRL, 0x1},
>> + {BQ2515X_LDOCTRL, 0xB0},
>> + {BQ2515X_MRCTRL, 0x2A},
>> + {BQ2515X_ICCTRL0, 0x10},
>> + {BQ2515X_ICCTRL1, 0x0},
>> + {BQ2515X_ICCTRL2, 0x0},
>> + {BQ2515X_ADCCTRL0, 0x2},
>> + {BQ2515X_ADCCTRL1, 0x40},
>> + {BQ2515X_ADC_COMP1_M, 0x23},
>> + {BQ2515X_ADC_COMP1_L, 0x20},
>> + {BQ2515X_ADC_COMP2_M, 0x38},
>> + {BQ2515X_ADC_COMP2_L, 0x90},
>> + {BQ2515X_ADC_COMP3_M, 0x0},
>> + {BQ2515X_ADC_COMP3_L, 0x0},
>> + {BQ2515X_ADC_READ_EN, 0x0},
>> + {BQ2515X_TS_FASTCHGCTRL, 0x34},
>> + {BQ2515X_TS_COLD, 0x7C},
>> + {BQ2515X_TS_COOL, 0x6D},
>> + {BQ2515X_TS_WARM, 0x38},
>> + {BQ2515X_TS_HOT, 0x27},
>> + {BQ2515X_DEVICE_ID, 0x20},
>> +};
>> +
>> +static struct reg_default bq25155_reg_defaults[] = {
>> + {BQ2515X_FLAG0, 0x0},
>> + {BQ2515X_FLAG1, 0x0},
>> + {BQ2515X_FLAG2, 0x0},
>> + {BQ2515X_FLAG3, 0x0},
>> + {BQ2515X_MASK0, 0x0},
>> + {BQ2515X_MASK1, 0x0},
>> + {BQ2515X_MASK2, 0x71},
>> + {BQ2515X_MASK3, 0x0},
>> + {BQ2515X_VBAT_CTRL, 0x3C},
>> + {BQ2515X_ICHG_CTRL, 0x8},
>> + {BQ2515X_PCHRGCTRL, 0x2},
>> + {BQ2515X_TERMCTRL, 0x14},
>> + {BQ2515X_BUVLO, 0x0},
>> + {BQ2515X_CHARGERCTRL0, 0x82},
>> + {BQ2515X_CHARGERCTRL1, 0xC2},
>> + {BQ2515X_ILIMCTRL, 0x6},
>> + {BQ2515X_LDOCTRL, 0xB0},
>> + {BQ2515X_MRCTRL, 0x2A},
>> + {BQ2515X_ICCTRL0, 0x10},
>> + {BQ2515X_ICCTRL1, 0x0},
>> + {BQ2515X_ICCTRL2, 0x40},
>> + {BQ2515X_ADCCTRL0, 0x2},
>> + {BQ2515X_ADCCTRL1, 0x40},
>> + {BQ2515X_ADC_COMP1_M, 0x23},
>> + {BQ2515X_ADC_COMP1_L, 0x20},
>> + {BQ2515X_ADC_COMP2_M, 0x38},
>> + {BQ2515X_ADC_COMP2_L, 0x90},
>> + {BQ2515X_ADC_COMP3_M, 0x0},
>> + {BQ2515X_ADC_COMP3_L, 0x0},
>> + {BQ2515X_ADC_READ_EN, 0x0},
>> + {BQ2515X_TS_FASTCHGCTRL, 0x34},
>> + {BQ2515X_TS_COLD, 0x7C},
>> + {BQ2515X_TS_COOL, 0x6D},
>> + {BQ2515X_TS_WARM, 0x38},
>> + {BQ2515X_TS_HOT, 0x27},
>> + {BQ2515X_DEVICE_ID, 0x35},
>> +};
>> +
>> +static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + int val;
>> +
>> + /* Read the STAT register if we can read it then the device is out
>> + * of ship mode. If the register cannot be read then attempt to wake
>> + * it up and enable the ADC.
>> + */
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
>> + if (ret)
>> + return ret;
>> +
>> + /* Need to toggle LP and bring device out of ship mode. The device
>> + * will exit the ship mode when the MR pin is held low for at least
>> + * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
>> + */
>> + gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
>> +
>> + gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
>> + usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
>> + gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
>> +
>> + return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
>> + (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
>> +}
>> +
>> +static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
>> +{
>> + bool dc = false;
>> + unsigned int val;
>> + int ret;
>> +
>> + if (bq2515x->ac_detect_gpio)
>> + val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
>> + else {
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + dc = val & BQ2515X_VIN_GOOD;
>> +
>> + ret = bq2515x->mains_online != dc;
>> +
>> + bq2515x->mains_online = dc;
>> +
>> + return ret;
>> +}
>> +
>> +static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> +
>> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
>> + BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
>> + if (ret)
>> + return ret;
>> +
>> + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
>> + BQ2515X_HWRESET_14S_WD, 0);
>> +}
>> +
>> +static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + int vbat_msb;
>> + int vbat_lsb;
>> + uint32_t vbat_measurement;
>> +
>> + if (!bq2515x->mains_online)
>> + bq2515x_wake_up(bq2515x);
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
>> + if (ret)
>> + return ret;
>> +
>> + vbat_measurement = (vbat_msb << 8) | vbat_lsb;
>> +
>> + return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
>> + BQ2515X_VBAT_MULTIPLIER;
>> +}
>> +
>> +static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + int ichg_msb;
>> + int ichg_lsb;
>> + uint32_t ichg_measurement;
>> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + unsigned int ichg_reg_code, reg_code;
>> + unsigned int icharge_range = 0, pchrgctrl;
>> + unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
>> +
>> + if (!bq2515x->mains_online)
>> + return -ENODATA;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
>> + if (ret)
>> + return ret;
>> +
>> + ichg_measurement = (ichg_msb << 8) | ichg_lsb;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
>> + if (ret)
>> + return ret;
>> +
>> + vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
>> +
>> + if (vlowv_sel)
>> + vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
>> +
>> + if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
>> + &pchrgctrl);
>> + if (ret)
>> + return ret;
>> +
>> + reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
>> + } else {
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
>> + &ichg_reg_code);
>> + if (ret)
>> + return ret;
>> +
>> + reg_code = ichg_reg_code;
>> + }
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
>> + if (ret)
>> + return ret;
>> +
>> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
>> +
>> + if (icharge_range)
>> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
>> +
>> + return reg_code * (ichg_multiplier * ichg_measurement /
>> + BQ2515X_ICHG_DIVISOR);
>> +}
>> +
>> +static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + int ce_pin;
>> + int icctrl2;
>> + int charger_disable;
>> +
>> + ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
>> + if (ret)
>> + return ret;
>> +
>> + charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
>> +
>> + if (charger_disable || ce_pin)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
>> +{
>> + gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
>> +
>> + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
>> + BQ2515X_CHARGER_DISABLE, val);
>> +}
>> +
>> +static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + unsigned int ichg_reg_code;
>> + unsigned int pchrgctrl;
>> + unsigned int icharge_range;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
>> + if (ret)
>> + return ret;
>> +
>> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
>> +
>> + if (icharge_range)
>> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
>> +
>> + return ichg_reg_code * ichg_multiplier;
>> +}
>> +
>> +static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
>> + int val)
>> +{
>> + int ret;
>> + unsigned int ichg_reg_code;
>> + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + unsigned int icharge_range = 0;
>> +
>> + if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
>> + return -EINVAL;
>> +
>> + if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
>> + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
>> + icharge_range = BQ2515X_ICHARGE_RANGE;
>> + }
>> +
>> + bq2515x_set_charge_disable(bq2515x, 1);
>> +
>> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
>> + BQ2515X_ICHARGE_RANGE, icharge_range);
>> + if (ret)
>> + return ret;
>> +
>> + ichg_reg_code = val / ichg_multiplier;
>> +
>> + ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
>> + if (ret)
>> + return ret;
>> +
>> + return bq2515x_set_charge_disable(bq2515x, 0);
>> +}
>> +
>> +static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + unsigned int pchrgctrl;
>> + unsigned int icharge_range;
>> + u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + unsigned int precharge_reg_code;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
>> + if (ret)
>> + return ret;
>> +
>> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
>> +
>> + if (icharge_range)
>> + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
>> +
>> + precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
>> +
>> + return precharge_reg_code * precharge_multiplier;
>> +}
>> +
>> +static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
>> + int val)
>> +{
>> + int ret;
>> + unsigned int pchrgctrl;
>> + unsigned int icharge_range;
>> + unsigned int precharge_reg_code;
>> + unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
>> + if (ret)
>> + return ret;
>> +
>> + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
>> +
>> + if (icharge_range) {
>> + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
>> + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
>> + } else {
>> + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
>> + precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
>> + }
>> + if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
>> + return -EINVAL;
>> +
>> + precharge_reg_code = val / precharge_multiplier;
>> +
>> + ret = bq2515x_set_charge_disable(bq2515x, 1);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
>> + BQ2515X_PRECHARGE_MASK, precharge_reg_code);
>> + if (ret)
>> + return ret;
>> +
>> + return bq2515x_set_charge_disable(bq2515x, 0);
>> +}
>> +
>> +static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
>> + union power_supply_propval *val)
>> +{
>> + bool status0_no_fault;
>> + bool status1_no_fault;
>> + bool ce_status;
>> + bool charge_done;
>> + unsigned int status;
>> + int ret;
>> +
>> + if (!bq2515x->mains_online) {
>> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
>> + return 0;
>> + }
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * The code block below is used to determine if any faults from the
>> + * STAT0 register are disbaling charging or if the charge has completed
>> + * according to the CHARGE_DONE_STAT bit.
>> + */
>> + if (((status & BQ2515X_STAT0_MASK) == true) &
>> + ((status & BQ2515X_CHRG_DONE) == false)) {
>> + status0_no_fault = true;
>> + charge_done = false;
>> + } else if (status & BQ2515X_CHRG_DONE) {
>> + charge_done = true;
>> + status0_no_fault = false;
>> + } else {
>> + status0_no_fault = false;
>> + charge_done = false;
>> + }
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
>> + if (ret)
>> + return ret;
>> + /*
>> + * The code block below is used to determine if any faults from the
>> + * STAT1 register are disbaling charging
>> + */
>> + if ((status & BQ2515X_STAT1_MASK) == false)
>> + status1_no_fault = true;
>> + else
>> + status1_no_fault = false;
>> +
>> + ce_status = (!bq2515x_get_charge_disable(bq2515x));
>> +
>> + /*
>> + * If there are no faults and charging is enabled, then status is
>> + * charging. Otherwise, if charging is complete, then status is full.
>> + * Otherwise, if a fault exists or charging is disabled, then status is
>> + * not charging
>> + */
>> + if (status0_no_fault & status1_no_fault & ce_status)
>> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
>> + else if (charge_done)
>> + val->intval = POWER_SUPPLY_STATUS_FULL;
>> + else if (!(status0_no_fault & status1_no_fault & ce_status))
>> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
>> +
>> + return 0;
>> +}
>> +
>> +static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
>> +{
>> + int vbat_reg_code;
>> + int ret;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
>> + if (ret)
>> + return ret;
>> +
>> + return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
>> +}
>> +
>> +static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
>> +{
>> + int vbat_reg_code;
>> +
>> + if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
>> + return -EINVAL;
>> +
>> + vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
>> +
>> + return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
>> +}
>> +
>> +static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + int ilimctrl;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
>> + if (ret)
>> + return ret;
>> +
>> + return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
>> +}
>> +
>> +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
>> +{
>> + int i = 0;
>> + unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
>> +
>> + for (i = array_size - 1; i > 0; i--) {
>> + if (val >= bq2515x_ilim_lvl_values[i])
>> + break;
>> + }
>> + return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
>> +}
>> +
>> +static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
>> + enum power_supply_property prop)
>> +{
>> + switch (prop) {
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
>> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
>> + union power_supply_propval *val)
>> +{
>> + int health = POWER_SUPPLY_HEALTH_GOOD;
>> + int ret;
>> + unsigned int stat1;
>> + unsigned int flag3;
>> +
>> + if (!bq2515x->mains_online)
>> + bq2515x_wake_up(bq2515x);
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
>> + if (ret)
>> + return ret;
>> +
>> + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
>> + if (ret)
>> + return ret;
>> +
>> + if (stat1 & BQ2515X_HEALTH_MASK) {
>> + switch (stat1 & BQ2515X_HEALTH_MASK) {
>> + case BQ2515X_TS_HOT_STAT:
>> + health = POWER_SUPPLY_HEALTH_HOT;
>> + break;
>> + case BQ2515X_TS_WARM_STAT:
>> + health = POWER_SUPPLY_HEALTH_WARM;
>> + break;
>> + case BQ2515X_TS_COOL_STAT:
>> + health = POWER_SUPPLY_HEALTH_COOL;
>> + break;
>> + case BQ2515X_TS_COLD_STAT:
>> + health = POWER_SUPPLY_HEALTH_COLD;
>> + break;
>> + default:
>> + health = POWER_SUPPLY_HEALTH_UNKNOWN;
>> + break;
>> + }
>> + }
>> +
>> + if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
>> + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
>> +
>> + if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
>> + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
>> +
>> + val->intval = health;
>> + return 0;
>> +}
>> +
>> +static int bq2515x_mains_set_property(struct power_supply *psy,
>> + enum power_supply_property prop,
>> + const union power_supply_propval *val)
>> +{
>> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
>> + int ret;
>> +
>> + switch (prop) {
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int bq2515x_battery_set_property(struct power_supply *psy,
>> + enum power_supply_property prop,
>> + const union power_supply_propval *val)
>> +{
>> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
>> + int ret;
>> +
>> + switch (prop) {
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
>> + ret = bq2515x_set_batt_reg(bq2515x, val->intval);
>> + break;
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
>> + ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
>> + break;
>> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
>> + ret = bq2515x_set_precharge_current(bq2515x, val->intval);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
> Expose those through the charger device. The battery device
> can expose maximum data (e.g. POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX),
> but should not control the charging itself.
ACK. Just to confirm this would eliminate the need for the
bq2515x_battery_set_property altogether as these three properties should
be set in the charger device. There will only be a
bq2515x_battery_get_property to report the CONSTANT_CHARGE_VOLTAGE_MAX
and CONSTANT_CHARGE_CURRENT_MAX values captured from the devicetree.
>
>> +static int bq2515x_mains_get_property(struct power_supply *psy,
>> + enum power_supply_property prop,
>> + union power_supply_propval *val)
>> +{
>> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
>> + int ret = 0;
>> +
>> + switch (prop) {
>> + case POWER_SUPPLY_PROP_ONLINE:
>> + val->intval = bq2515x->mains_online;
>> + break;
>> + case POWER_SUPPLY_PROP_HEALTH:
>> + ret = bq2515x_charger_get_health(bq2515x, val);
>> + if (ret)
>> + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
>> + break;
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + ret = bq2515x_get_ilim_lvl(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + case POWER_SUPPLY_PROP_MODEL_NAME:
>> + val->strval = bq2515x->model_name;
>> + break;
>> + case POWER_SUPPLY_PROP_MANUFACTURER:
>> + val->strval = BQ2515X_MANUFACTURER;
>> + break;
>> + case POWER_SUPPLY_PROP_STATUS:
>> + ret = bq2515x_charging_status(bq2515x, val);
>> + if (ret)
>> + return ret;
>> + break;
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int bq2515x_battery_get_property(struct power_supply *psy,
>> + enum power_supply_property prop,
>> + union power_supply_propval *val)
>> +{
>> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
>> + int ret;
>> +
>> + ret = bq2515x_update_ps_status(bq2515x);
>> + if (ret)
>> + return ret;
>> +
>> + switch (prop) {
>> +
>> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
>> + ret = bq2515x_get_battery_voltage_now(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + case POWER_SUPPLY_PROP_CURRENT_NOW:
>> + ret = bq2515x_get_battery_current_now(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
>> + ret = bq2515x_get_const_charge_current(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
>> + ret = bq2515x_get_precharge_current(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
>> + ret = bq2515x_get_batt_reg(bq2515x);
>> + if (ret < 0)
>> + return ret;
>> +
>> + val->intval = ret;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static enum power_supply_property bq2515x_battery_properties[] = {
>> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> + POWER_SUPPLY_PROP_CURRENT_NOW,
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
>> + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
>> +};
>> +
>> +static enum power_supply_property bq2515x_mains_properties[] = {
>> + POWER_SUPPLY_PROP_ONLINE,
>> + POWER_SUPPLY_PROP_STATUS,
>> + POWER_SUPPLY_PROP_HEALTH,
>> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
>> + POWER_SUPPLY_PROP_MODEL_NAME,
>> + POWER_SUPPLY_PROP_MANUFACTURER,
>> +};
>> +
>> +static struct power_supply_desc bq2515x_mains_desc = {
>> + .name = "bq2515x-mains",
>> + .type = POWER_SUPPLY_TYPE_MAINS,
>> + .get_property = bq2515x_mains_get_property,
>> + .set_property = bq2515x_mains_set_property,
>> + .properties = bq2515x_mains_properties,
>> + .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
>> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
>> +};
>> +
>> +static struct power_supply_desc bq2515x_battery_desc = {
>> + .name = "bq2515x-battery",
>> + .type = POWER_SUPPLY_TYPE_BATTERY,
>> + .get_property = bq2515x_battery_get_property,
>> + .set_property = bq2515x_battery_set_property,
>> + .properties = bq2515x_battery_properties,
>> + .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
>> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
>> +};
>> +
>> +static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
>> + struct device *dev, struct power_supply_config psy_cfg)
>> +{
>> + bq2515x->mains = devm_power_supply_register(bq2515x->dev,
>> + &bq2515x_mains_desc,
>> + &psy_cfg);
>> + if (IS_ERR(bq2515x->mains))
>> + return -EINVAL;
>> +
>> + bq2515x->battery = devm_power_supply_register(bq2515x->dev,
>> + &bq2515x_battery_desc,
>> + &psy_cfg);
>> + if (IS_ERR(bq2515x->battery))
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> + struct power_supply_battery_info bat_info = { };
>> +
>> + ret = bq2515x_disable_watchdog_timers(bq2515x);
>> + if (ret)
>> + return ret;
>> +
>> + if (bq2515x->init_data.ilim) {
>> + ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
>> + if (ret) {
>> + dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
>> +
>> + bat_info.constant_charge_current_max_ua =
>> + BQ2515X_DEFAULT_ICHG_UA;
>> +
>> + bat_info.constant_charge_voltage_max_uv =
>> + BQ2515X_DEFAULT_VBAT_REG_UV;
>> +
>> + bat_info.precharge_current_ua =
>> + BQ2515X_DEFAULT_IPRECHARGE_UA;
>> + }
>> +
>> + ret = bq2515x_set_const_charge_current(bq2515x,
>> + bat_info.constant_charge_current_max_ua);
>> + if (ret)
>> + return ret;
>> +
>> + ret = bq2515x_set_batt_reg(bq2515x,
>> + bat_info.constant_charge_voltage_max_uv);
>> + if (ret)
>> + return ret;
>> +
>> + return bq2515x_set_precharge_current(bq2515x,
>> + bat_info.precharge_current_ua);
>> +}
>> +
>> +static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
>> +{
>> + int ret;
>> +
>> + ret = device_property_read_u32(bq2515x->dev,
>> + "input-current-limit-microamp",
>> + &bq2515x->init_data.ilim);
>> + if (ret)
>> + switch (bq2515x->device_id) {
>> + case BQ25150:
>> + bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
>> + break;
>> + case BQ25155:
>> + bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
>> + break;
>> + }
> Please add {} for the if.
ACK
>
>> + bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
>> + "ac-detect", GPIOD_IN);
>> + if (IS_ERR(bq2515x->ac_detect_gpio)) {
>> + ret = PTR_ERR(bq2515x->ac_detect_gpio);
>> + if (ret != -ENODEV) {
>> + dev_err(bq2515x->dev, "Failed to get ac detect");
>> + return ret;
>> + }
>> + bq2515x->ac_detect_gpio = NULL;
> All of this is not needed. If no GPIO is specified,
> devm_gpiod_get_optional() will return NULL instead
> of an error code. This is enough:
>
> if (IS_ERR(bq2515x->ac_detect_gpio)) {
> ret = PTR_ERR(bq2515x->ac_detect_gpio);
> dev_err(bq2515x->dev, "Failed to get ac detect: %d\n", ret);
> return ret;
> }
ACK
>
>> + }
>> +
>> + bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
>> + "reset", GPIOD_OUT_LOW);
>> + if (IS_ERR(bq2515x->reset_gpio)) {
>> + ret = PTR_ERR(bq2515x->reset_gpio);
>> + if (ret != -ENODEV) {
>> + dev_err(bq2515x->dev, "Failed to get reset");
>> + return ret;
>> + }
>> + bq2515x->reset_gpio = NULL;
>> + }
> The same as previous GPIO.
ACK
>
>> + bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
>> + "powerdown", GPIOD_OUT_LOW);
>> + if (IS_ERR(bq2515x->powerdown_gpio)) {
>> + ret = PTR_ERR(bq2515x->powerdown_gpio);
>> + if (ret != -ENODEV) {
>> + dev_err(bq2515x->dev, "Failed to get powerdown");
>> + return ret;
>> + }
>> + bq2515x->powerdown_gpio = NULL;
>> + }
> The same as previous GPIO.
ACK
>
>> + bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
>> + "charge-enable",
>> + GPIOD_OUT_LOW);
>> + if (IS_ERR(bq2515x->ce_gpio)) {
>> + ret = PTR_ERR(bq2515x->ce_gpio);
>> + if (ret != -ENODEV) {
>> + dev_err(bq2515x->dev, "Failed to get ce");
>> + return ret;
>> + }
>> + bq2515x->ce_gpio = NULL;
>> + }
> The same as previous GPIO.
ACK
>
>> + return 0;
>> +}
>> +
>> +static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case BQ2515X_STAT0 ... BQ2515X_FLAG3:
>> + case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static const struct regmap_config bq25150_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = BQ2515X_DEVICE_ID,
>> + .reg_defaults = bq25150_reg_defaults,
>> + .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
>> + .cache_type = REGCACHE_RBTREE,
>> + .volatile_reg = bq2515x_volatile_register,
>> +};
>> +
>> +static const struct regmap_config bq25155_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = BQ2515X_DEVICE_ID,
>> + .reg_defaults = bq25155_reg_defaults,
>> + .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
>> + .cache_type = REGCACHE_RBTREE,
>> + .volatile_reg = bq2515x_volatile_register,
>> +};
>> +
>> +static int bq2515x_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct device *dev = &client->dev;
>> + struct bq2515x_device *bq2515x;
>> + struct power_supply_config charger_cfg = {};
>> + int ret;
>> +
>> + bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
>> + if (!bq2515x)
>> + return -ENOMEM;
>> +
>> + bq2515x->dev = dev;
>> +
>> + strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
>> +
>> + bq2515x->device_id = id->driver_data;
>> +
>> + switch (bq2515x->device_id) {
>> + case BQ25150:
>> + bq2515x->regmap = devm_regmap_init_i2c(client,
>> + &bq25150_regmap_config);
>> + break;
>> + case BQ25155:
>> + bq2515x->regmap = devm_regmap_init_i2c(client,
>> + &bq25155_regmap_config);
>> + break;
>> + }
>> +
>> + if (IS_ERR(bq2515x->regmap)) {
>> + dev_err(dev, "failed to allocate register map\n");
>> + return PTR_ERR(bq2515x->regmap);
>> + }
>> +
>> + i2c_set_clientdata(client, bq2515x);
>> +
>> + charger_cfg.drv_data = bq2515x;
>> + charger_cfg.of_node = dev->of_node;
>> +
>> + ret = bq2515x_read_properties(bq2515x);
>> + if (ret) {
>> + dev_err(dev, "Failed to read device tree properties %d\n",
>> + ret);
>> + return ret;
>> + }
>> +
>> + ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
>> + if (ret) {
>> + dev_err(dev, "failed to register power supply\n");
>> + return ret;
>> + }
>> +
>> + ret = bq2515x_hw_init(bq2515x);
>> + if (ret) {
>> + dev_err(dev, "Cannot initialize the chip\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id bq2515x_i2c_ids[] = {
>> + { "bq25150", BQ25150, },
>> + { "bq25155", BQ25155, },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
>> +
>> +static const struct of_device_id bq2515x_of_match[] = {
>> + { .compatible = "ti,bq25150", },
>> + { .compatible = "ti,bq25155", },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, bq2515x_of_match);
>> +
>> +static struct i2c_driver bq2515x_driver = {
>> + .driver = {
>> + .name = "bq2515x-charger",
>> + .of_match_table = bq2515x_of_match,
>> + },
>> + .probe = bq2515x_probe,
>> + .id_table = bq2515x_i2c_ids,
>> +};
>> +module_i2c_driver(bq2515x_driver);
>> +
>> +MODULE_AUTHOR("Dan Murphy <[email protected]>");
>> +MODULE_AUTHOR("Ricardo Rivera-Matos <[email protected]>");
>> +MODULE_DESCRIPTION("BQ2515X charger driver");
>> +MODULE_LICENSE("GPL v2");
> Otherwise this looks good to me now. I hope I can merge the next
> version :)
Cool, I hope so too. We have some more patches ready. :)
>
> -- Sebastian

2020-07-01 16:18:40

by Sebastian Reichel

[permalink] [raw]
Subject: Re: [EXTERNAL] Re: [PATCH v14 4/4] power: supply: bq25150 introduce the bq25150

Hi,

On Tue, Jun 30, 2020 at 11:17:30PM -0500, Ricardo Rivera-Matos wrote:
> [...]
> > > +static int bq2515x_battery_set_property(struct power_supply *psy,
> > > + enum power_supply_property prop,
> > > + const union power_supply_propval *val)
> > > +{
> > > + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> > > + int ret;
> > > +
> > > + switch (prop) {
> > > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > > + ret = bq2515x_set_batt_reg(bq2515x, val->intval);
> > > + break;
> > > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > > + ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
> > > + break;
> > > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > > + ret = bq2515x_set_precharge_current(bq2515x, val->intval);
> > > + break;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return ret;
> > > +}
> > Expose those through the charger device. The battery device
> > can expose maximum data (e.g. POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX),
> > but should not control the charging itself.
> ACK. Just to confirm this would eliminate the need for the
> bq2515x_battery_set_property altogether as these three properties should be
> set in the charger device. There will only be a bq2515x_battery_get_property
> to report the CONSTANT_CHARGE_VOLTAGE_MAX and CONSTANT_CHARGE_CURRENT_MAX
> values captured from the devicetree.

Right.

-- Sebastian