2020-08-03 03:57:54

by Mark Tomlinson

[permalink] [raw]
Subject: [PATCH v3 1/2] PCI: iproc: Set affinity mask on MSI interrupts

The core interrupt code expects the irq_set_affinity call to update the
effective affinity for the interrupt. This was not being done, so update
iproc_msi_irq_set_affinity() to do so.

Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")
Signed-off-by: Mark Tomlinson <[email protected]>
---
changes in v2:
- Patch 1/2 Added Fixes tag
- Patch 2/2 Replace original change with change suggested by Bjorn
Helgaas.

changes in v3:
- Use bitfield rather than bool to save memory.

drivers/pci/controller/pcie-iproc-msi.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
index 3176ad3ab0e5..908475d27e0e 100644
--- a/drivers/pci/controller/pcie-iproc-msi.c
+++ b/drivers/pci/controller/pcie-iproc-msi.c
@@ -209,15 +209,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
int target_cpu = cpumask_first(mask);
int curr_cpu;
+ int ret;

curr_cpu = hwirq_to_cpu(msi, data->hwirq);
if (curr_cpu == target_cpu)
- return IRQ_SET_MASK_OK_DONE;
+ ret = IRQ_SET_MASK_OK_DONE;
+ else {
+ /* steer MSI to the target CPU */
+ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+ ret = IRQ_SET_MASK_OK;
+ }

- /* steer MSI to the target CPU */
- data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+ irq_data_update_effective_affinity(data, cpumask_of(target_cpu));

- return IRQ_SET_MASK_OK;
+ return ret;
}

static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
--
2.28.0


2020-08-05 22:51:43

by Ray Jui

[permalink] [raw]
Subject: Re: [PATCH v3 1/2] PCI: iproc: Set affinity mask on MSI interrupts



On 8/2/2020 8:52 PM, Mark Tomlinson wrote:
> The core interrupt code expects the irq_set_affinity call to update the
> effective affinity for the interrupt. This was not being done, so update
> iproc_msi_irq_set_affinity() to do so.
>
> Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")
> Signed-off-by: Mark Tomlinson <[email protected]>
> ---
> changes in v2:
> - Patch 1/2 Added Fixes tag
> - Patch 2/2 Replace original change with change suggested by Bjorn
> Helgaas.
>
> changes in v3:
> - Use bitfield rather than bool to save memory.
>
> drivers/pci/controller/pcie-iproc-msi.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
> index 3176ad3ab0e5..908475d27e0e 100644
> --- a/drivers/pci/controller/pcie-iproc-msi.c
> +++ b/drivers/pci/controller/pcie-iproc-msi.c
> @@ -209,15 +209,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
> struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
> int target_cpu = cpumask_first(mask);
> int curr_cpu;
> + int ret;
>
> curr_cpu = hwirq_to_cpu(msi, data->hwirq);
> if (curr_cpu == target_cpu)
> - return IRQ_SET_MASK_OK_DONE;
> + ret = IRQ_SET_MASK_OK_DONE;
> + else {
> + /* steer MSI to the target CPU */
> + data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
> + ret = IRQ_SET_MASK_OK;
> + }
>
> - /* steer MSI to the target CPU */
> - data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
> + irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
>
> - return IRQ_SET_MASK_OK;
> + return ret;
> }
>
> static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
>

Looks good with the Fixes tag added. Thanks.

Reviewed-by: Ray Jui <[email protected]>

2020-09-07 16:18:20

by Lorenzo Pieralisi

[permalink] [raw]
Subject: Re: [PATCH v3 1/2] PCI: iproc: Set affinity mask on MSI interrupts

On Mon, Aug 03, 2020 at 03:52:40PM +1200, Mark Tomlinson wrote:
> The core interrupt code expects the irq_set_affinity call to update the
> effective affinity for the interrupt. This was not being done, so update
> iproc_msi_irq_set_affinity() to do so.
>
> Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")
> Signed-off-by: Mark Tomlinson <[email protected]>
> ---
> changes in v2:
> - Patch 1/2 Added Fixes tag
> - Patch 2/2 Replace original change with change suggested by Bjorn
> Helgaas.
>
> changes in v3:
> - Use bitfield rather than bool to save memory.
>
> drivers/pci/controller/pcie-iproc-msi.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)

Applied to pci/qcom, thanks.

Lorenzo

> diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
> index 3176ad3ab0e5..908475d27e0e 100644
> --- a/drivers/pci/controller/pcie-iproc-msi.c
> +++ b/drivers/pci/controller/pcie-iproc-msi.c
> @@ -209,15 +209,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
> struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
> int target_cpu = cpumask_first(mask);
> int curr_cpu;
> + int ret;
>
> curr_cpu = hwirq_to_cpu(msi, data->hwirq);
> if (curr_cpu == target_cpu)
> - return IRQ_SET_MASK_OK_DONE;
> + ret = IRQ_SET_MASK_OK_DONE;
> + else {
> + /* steer MSI to the target CPU */
> + data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
> + ret = IRQ_SET_MASK_OK;
> + }
>
> - /* steer MSI to the target CPU */
> - data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
> + irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
>
> - return IRQ_SET_MASK_OK;
> + return ret;
> }
>
> static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
> --
> 2.28.0
>