2020-08-03 12:58:39

by Peter Ujfalusi

Subject: [PATCH v2 0/2] dmaengine: ti: k3-psil: Add support for j7200

Hi,

Changes since v1:
- Drop unrelated empty line change in patch 1 (k3-psil.c)

j7200 uses the same DMA hardware but have different set of peripherals, needing
different PSI-L thread map compared to j721e.

To simplify the runtime PSI-L map selection we will switch to use
soc_device_match.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Regards,
Peter
---
Peter Ujfalusi (2):
dmaengine: ti: k3-psil: Use soc_device_match to get the psil map
dmaengine: ti: k3-psil: add map for j7200

drivers/dma/ti/Makefile | 5 +-
drivers/dma/ti/k3-psil-j7200.c | 175 +++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c | 19 +++-
4 files changed, 194 insertions(+), 6 deletions(-)
create mode 100644 drivers/dma/ti/k3-psil-j7200.c

--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

2020-08-17 05:24:31

by Vinod Koul

Subject: Re: [PATCH v2 0/2] dmaengine: ti: k3-psil: Add support for j7200

On 03-08-20, 15:57, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v1:
> - Drop unrelated empty line change in patch 1 (k3-psil.c)
>
> j7200 uses the same DMA hardware but have different set of peripherals, needing
> different PSI-L thread map compared to j721e.
>
> To simplify the runtime PSI-L map selection we will switch to use
> soc_device_match.

Applied, thanks

--
~Vinod