This makes it easier to combine dt bindings for sdm845/sc7180 dispcc.
Note: nothing upstream provides these clocks and the sdm845 dispcc driver
hasn't switched to using .fw_name for these clocks (these properties are
ignored), so changing this shouldn't be a problem.
Signed-off-by: Jonathan Marek <[email protected]>
---
.../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d042..ead44705333b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -43,8 +43,8 @@ properties:
- const: dsi0_phy_pll_out_dsiclk
- const: dsi1_phy_pll_out_byteclk
- const: dsi1_phy_pll_out_dsiclk
- - const: dp_link_clk_divsel_ten
- - const: dp_vco_divided_clk_src_mux
+ - const: dp_phy_pll_link_clk
+ - const: dp_phy_pll_vco_div_clk
'#clock-cells':
const: 1
@@ -92,8 +92,8 @@ examples:
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux";
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.26.1