From: Biwen Li <[email protected]>
The 'fsl,ippdexpcr1-alt-reg' property is used to handle an errata A-008646
on LS1021A.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
Change in v3:
- Simplize related proterty definition and rename it.
Change in v2:
- None
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index 5a33619..62a22fc 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -34,6 +34,9 @@ Chassis Version Example Chips
Optional properties:
- little-endian : RCPM register block is Little Endian. Without it RCPM
will be Big Endian (default case).
+ - fsl,ippdexpcr1-alt-reg : The property is trying to workaround a
+ hardware issue (found on SoC LS1021A only), if pressent, RCPM driver
+ will use SCFG_SPARECR8 as a shadow register for RCPM_IPPDEXPCR1.
Example:
The RCPM node for T4240:
@@ -43,6 +46,15 @@ The RCPM node for T4240:
#fsl,rcpm-wakeup-cells = <2>;
};
+The RCPM node for LS1021A:
+ rcpm: rcpm@1ee2140 {
+ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee2140 0x0 0x8>;
+ #fsl,rcpm-wakeup-cells = <2>;
+ fsl,ippdexpcr1-alt-reg;
+ };
+
+
* Freescale RCPM Wakeup Source Device Tree Bindings
-------------------------------------------
Required fsl,rcpm-wakeup property should be added to a device node if the device
--
2.7.4
From: Biwen Li <[email protected]>
The patch fixes a bug that FlexTimer cannot
wakeup system in deep sleep.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
Change in v3:
- Update proterty according to binding and driver change.
Change in v2:
- Change subject of commit message to be consistent with other related patches.
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 827373e..98b597e 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1007,6 +1007,7 @@
compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x8>;
#fsl,rcpm-wakeup-cells = <2>;
+ fsl,ippdexpcr1-alt-reg;
};
ftm_alarm0: timer0@29d0000 {
--
2.7.4
From: Biwen Li <[email protected]>
Hardware issue:
- Reading register RCPM_IPPDEXPCR1 always return zero, this causes
system firmware could not get correct information and wrongly do
clock gating for all wakeup source IP during system suspend. Then
those IPs will never get chance to wake system.
Workaround:
- Copy register RCPM_IPPDEXPCR1's setting to register SCFG_SPARECR8
to allow system firmware's psci method read it and do things accordingly.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
Change in v3:
- Add copy_ippdexpcr1_setting(), simplize workaournd's implementation
according to binding update.
- Minor update on commit message.
Change in v2:
- Update commit message to be more clear.
- Replace device_property_read_u32_array() with syscon_regmap_lookup_by_phandle_args()
to make code simpler.
drivers/soc/fsl/rcpm.c | 35 ++++++++++++++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
index a093dbe..4ac2a77 100644
--- a/drivers/soc/fsl/rcpm.c
+++ b/drivers/soc/fsl/rcpm.c
@@ -2,7 +2,7 @@
//
// rcpm.c - Freescale QorIQ RCPM driver
//
-// Copyright 2019 NXP
+// Copyright 2019-2020 NXP
//
// Author: Ran Wang <[email protected]>
@@ -22,6 +22,28 @@ struct rcpm {
bool little_endian;
};
+#define SCFG_SPARECR8 0x051c
+
+static void copy_ippdexpcr1_setting(u32 val)
+{
+ struct device_node *np;
+ void __iomem *regs;
+ u32 reg_val;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-scfg");
+ if (!np)
+ return;
+
+ regs = of_iomap(np, 0);
+ if (!regs)
+ return;
+
+ reg_val = ioread32be(regs + SCFG_SPARECR8);
+ iowrite32be(val | reg_val, regs + SCFG_SPARECR8);
+
+ iounmap(regs);
+}
+
/**
* rcpm_pm_prepare - performs device-level tasks associated with power
* management, such as programming related to the wakeup source control.
@@ -90,6 +112,17 @@ static int rcpm_pm_prepare(struct device *dev)
tmp |= ioread32be(address);
iowrite32be(tmp, address);
}
+ /*
+ * Workaround of errata A-008646 on SoC LS1021A:
+ * There is a bug of register ippdexpcr1.
+ * Reading configuration register RCPM_IPPDEXPCR1
+ * always return zero. So save ippdexpcr1's value
+ * to register SCFG_SPARECR8.And the value of
+ * ippdexpcr1 will be read from SCFG_SPARECR8.
+ */
+ if (dev_of_node(dev) && (i == 1))
+ if (device_property_read_bool(dev, "fsl,ippdexpcr1-alt-reg"))
+ copy_ippdexpcr1_setting(tmp);
}
return 0;
--
2.7.4
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.
Signed-off-by: Ran Wang <[email protected]>
Acked-by: Li Yang <[email protected]>
---
Change in v3:
- None
Change in v2:
- None
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 98b597e..cb95964 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1014,7 +1014,7 @@
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
reg-names = "ftm";
- fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
--
2.7.4
The range of dcfg reg is wrong, which overlap with other device,
such as rcpm. This issue causing rcpm driver failed to claim
reg resource when calling devm_ioremap_resource().
Signed-off-by: Ran Wang <[email protected]>
Acked-by: Li Yang <[email protected]>
---
Change in v3:
- None
Change in v2:
- None
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index cb95964..9e588ad 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -173,7 +173,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
--
2.7.4
Hi Rob,
On Tuesday, September 29, 2020 4:23 PM, Ran Wang wrote:
>
> From: Biwen Li <[email protected]>
>
> The 'fsl,ippdexpcr1-alt-reg' property is used to handle an errata A-008646 on
> LS1021A.
>
> Signed-off-by: Biwen Li <[email protected]>
> Signed-off-by: Ran Wang <[email protected]>
> ---
> Change in v3:
> - Simplize related proterty definition and rename it.
Could you please comment for this version? Thanks in advance.
Regards,
Ran
> Change in v2:
> - None
>
> Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> index 5a33619..62a22fc 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> @@ -34,6 +34,9 @@ Chassis Version Example Chips
> Optional properties:
> - little-endian : RCPM register block is Little Endian. Without it RCPM
> will be Big Endian (default case).
> + - fsl,ippdexpcr1-alt-reg : The property is trying to workaround a
> + hardware issue (found on SoC LS1021A only), if pressent, RCPM driver
> + will use SCFG_SPARECR8 as a shadow register for RCPM_IPPDEXPCR1.
>
> Example:
> The RCPM node for T4240:
> @@ -43,6 +46,15 @@ The RCPM node for T4240:
> #fsl,rcpm-wakeup-cells = <2>;
> };
>
> +The RCPM node for LS1021A:
> + rcpm: rcpm@1ee2140 {
> + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
> + reg = <0x0 0x1ee2140 0x0 0x8>;
> + #fsl,rcpm-wakeup-cells = <2>;
> + fsl,ippdexpcr1-alt-reg;
> + };
> +
> +
> * Freescale RCPM Wakeup Source Device Tree Bindings
> -------------------------------------------
> Required fsl,rcpm-wakeup property should be added to a device node if the
> device
> --
> 2.7.4