There are two models of Orange Pi zero which are confusingly marketed
under the same name. Old model comes without a flash memory and current
model does have a flash memory. Build device tree for each model.
Signed-off-by: Michal Suchanek <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
.../sun8i-h2-plus-orangepi-zero-no-flash.dts | 210 ++++++++++++++++++
.../boot/dts/sun8i-h2-plus-orangepi-zero.dts | 201 +----------------
3 files changed, 215 insertions(+), 197 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero-no-flash.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..f2853cea0c9c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1168,6 +1168,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
+ sun8i-h2-plus-orangepi-zero-no-flash.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i-h3-beelink-x2.dtb \
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero-no-flash.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero-no-flash.dts
new file mode 100644
index 000000000000..3859b663e3f0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero-no-flash.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <[email protected]>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ * Copyright (C) 2016 Hans de Goede <[email protected]>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Xunlong Orange Pi Zero (old model without flash memory)";
+ compatible = "xunlong,orangepi-zero-no-flash",
+ "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
+
+ aliases {
+ serial0 = &uart0;
+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet0 = &emac;
+ ethernet1 = &xr819;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr_led {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status_led {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_vcc_wifi: reg_vcc_wifi {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ enable-active-high;
+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vdd_cpux: vdd-cpux-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ enable-active-high;
+ gpios-states = <1>;
+ states = <1100000 0>, <1300000 1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpux>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ /*
+ * Explicitly define the sdio device, so that we can add an ethernet
+ * alias for it (which e.g. makes u-boot set a mac-address).
+ */
+ xr819: sdio_wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&spi0 {
+ /* On the old model of Orange Pi Zero the flash memory is not mounted */
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ /*
+ * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+ * power up the board; when it's used as OTG port, this VBUS is
+ * always off even if the board is powered via GPIO pins.
+ */
+ status = "okay";
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..e718ed143ad7 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -1,209 +1,16 @@
-/*
- * Copyright (C) 2016 Icenowy Zheng <[email protected]>
- *
- * Based on sun8i-h3-orangepi-one.dts, which is:
- * Copyright (C) 2016 Hans de Goede <[email protected]>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sun8i-h2-plus-orangepi-zero-no-flash.dts"
/ {
model = "Xunlong Orange Pi Zero";
- compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
-
- aliases {
- serial0 = &uart0;
- /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
- ethernet0 = &emac;
- ethernet1 = &xr819;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr_led {
- label = "orangepi:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- status_led {
- label = "orangepi:red:status";
- gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
- };
- };
-
- reg_vcc_wifi: reg_vcc_wifi {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
- enable-active-high;
- gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
- };
-
- reg_vdd_cpux: vdd-cpux-regulator {
- compatible = "regulator-gpio";
- regulator-name = "vdd-cpux";
- regulator-type = "voltage";
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-ramp-delay = <50>; /* 4ms */
-
- gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- enable-active-high;
- gpios-states = <1>;
- states = <1100000 0>, <1300000 1>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
- post-power-on-delay-ms = <200>;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_vdd_cpux>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc_wifi>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- /*
- * Explicitly define the sdio device, so that we can add an ethernet
- * alias for it (which e.g. makes u-boot set a mac-address).
- */
- xr819: sdio_wifi@1 {
- reg = <1>;
- };
+ compatible = "xunlong,orangepi-zero-with-flash",
+ "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
};
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
&spi0 {
/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
- status = "disabled";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25l1606e", "winbond,w25q128";
- reg = <0>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
- status = "disabled";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "disabled";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- /*
- * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
- * power up the board; when it's used as OTG port, this VBUS is
- * always off even if the board is powered via GPIO pins.
- */
- status = "okay";
- usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-};
--
2.28.0
There are two models of Orange Pi zero which are confusingly marketed
under the same name. Old model comes without a flash memory and current
model does have a flash memory. Add bindings for each model.
Signed-off-by: Michal Suchanek <[email protected]>
---
Documentation/devicetree/bindings/arm/sunxi.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index efc9118233b4..7e76ea544bf7 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -864,8 +864,15 @@ properties:
- const: xunlong,orangepi-win
- const: allwinner,sun50i-a64
+ - description: Xunlong OrangePi Zero (old model without flash memory)
+ items:
+ - const: xunlong,orangepi-zero-no-flash
+ - const: xunlong,orangepi-zero
+ - const: allwinner,sun8i-h2-plus
+
- description: Xunlong OrangePi Zero
items:
+ - const: xunlong,orangepi-zero-with-flash
- const: xunlong,orangepi-zero
- const: allwinner,sun8i-h2-plus
--
2.28.0
On Mon, Oct 12, 2020 at 04:47:53PM +0200, Maxime Ripard wrote:
> On Thu, Oct 08, 2020 at 08:40:06PM +0200, Michal Suchanek wrote:
> > There are two models of Orange Pi zero which are confusingly marketed
> > under the same name. Old model comes without a flash memory and current
> > model does have a flash memory. Add bindings for each model.
> >
> > Signed-off-by: Michal Suchanek <[email protected]>
>
> Unfortunately, changing a compatible or a DT filename is not an option
So how do you handle the situation when you find out that there are two
different devices marketed under the same name?
Surely the device tree is labaled by the device name but now you need
two device trees that describe the two devices.
Thanks
Michal
On Thu, Oct 08, 2020 at 08:40:06PM +0200, Michal Suchanek wrote:
> There are two models of Orange Pi zero which are confusingly marketed
> under the same name. Old model comes without a flash memory and current
> model does have a flash memory. Add bindings for each model.
>
> Signed-off-by: Michal Suchanek <[email protected]>
Unfortunately, changing a compatible or a DT filename is not an option
Maxime
Hello Michal,
On Mon, Oct 12, 2020 at 08:04:02PM +0200, Michal Such?nek wrote:
> On Mon, Oct 12, 2020 at 04:47:53PM +0200, Maxime Ripard wrote:
> > On Thu, Oct 08, 2020 at 08:40:06PM +0200, Michal Suchanek wrote:
> > > There are two models of Orange Pi zero which are confusingly marketed
> > > under the same name. Old model comes without a flash memory and current
> > > model does have a flash memory. Add bindings for each model.
> > >
> > > Signed-off-by: Michal Suchanek <[email protected]>
> >
> > Unfortunately, changing a compatible or a DT filename is not an option
>
> So how do you handle the situation when you find out that there are two
> different devices marketed under the same name?
>
> Surely the device tree is labaled by the device name but now you need
> two device trees that describe the two devices.
You can for example make the new DT name *-flash.dts, instead
of changing the name of existing DT to *-noflash.dts. Or if there's
a version number on the PCB that differs from the older variant,
use that version to differentiate the newer board DT.
regards,
o.
> Thanks
>
> Michal