From: Hou Zhiqiang <[email protected]>
Add an new IRQ chip declaration for LS1043A and LS1088A
- compatible "fsl,ls1043a-extirq" for LS1043A, LS1046A
- compatible "fsl,ls1088a-extirq" for LS1088A, LS208xA, LX216xA
Signed-off-by: Hou Zhiqiang <[email protected]>
Signed-off-by: Biwen Li <[email protected]>
---
drivers/irqchip/irq-ls-extirq.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/irqchip/irq-ls-extirq.c b/drivers/irqchip/irq-ls-extirq.c
index 4d1179fed77c..564e6de0bd8e 100644
--- a/drivers/irqchip/irq-ls-extirq.c
+++ b/drivers/irqchip/irq-ls-extirq.c
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
+// Copyright 2019-2020 NXP
#define pr_fmt(fmt) "irq-ls-extirq: " fmt
@@ -183,6 +184,9 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
priv->bit_reverse = (revcr != 0);
}
+ if (of_device_is_compatible(node, "fsl,ls1043a-extirq"))
+ priv->bit_reverse = true;
+
domain = irq_domain_add_hierarchy(parent_domain, 0, priv->nirq, node,
&extirq_domain_ops, priv);
if (!domain)
@@ -195,3 +199,5 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
}
IRQCHIP_DECLARE(ls1021a_extirq, "fsl,ls1021a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1043a_extirq, "fsl,ls1043a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1088a_extirq, "fsl,ls1088a-extirq", ls_extirq_of_init);
--
2.17.1
From: Biwen Li <[email protected]>
Add device-tree node for external interrupt lines IRQ0-IRQ11.
Signed-off-by: Biwen Li <[email protected]>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ae1b113ab162..8de845c08d0d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -540,6 +540,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,lx2160a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.17.1
From: Biwen Li <[email protected]>
Add device-tree node for external interrupt lines IRQ0-IRQ11.
Signed-off-by: Biwen Li <[email protected]>
---
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 33 ++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 36a799554620..c8b583cb2b9f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
*
* Harninder Rai <[email protected]>
*
@@ -205,6 +205,37 @@
little-endian;
};
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls1088a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.17.1