The Kobo Aura has an eKTF2132 touchscreen controller.
Although the vendor kernel toggles a reset pin (GPIO5-12) during the
startup sequence, the touchscreen works without it.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
---
v2:
- Fix devicetree build by adding #include <dt-bindings/interrupt-controller/irq.h>
- Drop the first two patches, which been applied in the meantime
v1:
- https://lore.kernel.org/lkml/[email protected]/
---
arch/arm/boot/dts/imx50-kobo-aura.dts | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index 53b3995d37e7f..97cfd970fe742 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx50.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Kobo Aura (N514)";
@@ -119,7 +120,14 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- /* TODO: ektf2132 touch controller at 0x15 */
+ touchscreen@15 {
+ reg = <0x15>;
+ compatible = "elan,ektf2132";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;
+ };
};
&i2c2 {
@@ -225,6 +233,13 @@ MX50_PAD_SD3_D7__ESDHC3_DAT7 0x1d4
>;
};
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX50_PAD_CSPI_MOSI__GPIO4_9 0x0
+ MX50_PAD_SD2_D5__GPIO5_13 0x0
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4
--
2.28.0
On Fri, Nov 13, 2020 at 12:30:54AM +0100, Jonathan Neusch?fer wrote:
> The Kobo Aura has an eKTF2132 touchscreen controller.
>
> Although the vendor kernel toggles a reset pin (GPIO5-12) during the
> startup sequence, the touchscreen works without it.
>
> Signed-off-by: Jonathan Neusch?fer <[email protected]>
Applied, thanks.