Hi,
This series adds i.MX8qxp LVDS PHY mode support for the Mixel PHY in the
Freescale i.MX8qxp SoC.
The Mixel PHY is MIPI DPHY + LVDS PHY combo, which can works in either
MIPI DPHY mode or LVDS PHY mode. The PHY mode is controlled by i.MX8qxp
SCU firmware. The PHY driver would call a SCU function to configure the
mode.
The PHY driver is already supporting the Mixel MIPI DPHY in i.MX8mq SoC,
where it appears to be a single MIPI DPHY.
Patch 1/5 sets PHY mode in the Northwest Logic MIPI DSI host controller
bridge driver, since i.MX8qxp SoC embeds this controller IP to support
MIPI DSI displays together with the Mixel PHY.
Patch 2/5 allows LVDS PHYs to be configured through the generic PHY functions
and through a custom structure added to the generic PHY configuration union.
Patch 3/5 converts mixel,mipi-dsi-phy plain text dt binding to json-schema.
Patch 4/5 adds dt binding support for the Mixel combo PHY in i.MX8qxp SoC.
Patch 5/5 adds the i.MX8qxp LVDS PHY mode support in the Mixel PHY driver.
Welcome comments, thanks.
v1->v2:
* Convert mixel,mipi-dsi-phy plain text dt binding to json-schema. (Guido)
* Print invalid PHY mode in dmesg from the Mixel PHY driver. (Guido)
* Add Guido's R-b tag on the patch for the nwl-dsi drm bridge driver.
Liu Ying (5):
drm/bridge: nwl-dsi: Set PHY mode in nwl_dsi_enable()
phy: Add LVDS configuration options
dt-bindings: phy: Convert mixel,mipi-dsi-phy to json-schema
dt-bindings: phy: mixel: mipi-dsi-phy: Add Mixel combo PHY support for
i.MX8qxp
phy: freescale: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode
support
.../devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 29 ---
.../bindings/phy/mixel,mipi-dsi-phy.yaml | 108 +++++++++
drivers/gpu/drm/bridge/nwl-dsi.c | 6 +
drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 270 ++++++++++++++++++++-
include/linux/phy/phy-lvds.h | 48 ++++
include/linux/phy/phy.h | 4 +
6 files changed, 425 insertions(+), 40 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
create mode 100644 include/linux/phy/phy-lvds.h
--
2.7.4
The Northwest Logic MIPI DSI host controller embedded in i.MX8qxp
works with a Mixel MIPI DPHY + LVDS PHY combo to support either
a MIPI DSI display or a LVDS display. So, this patch calls
phy_set_mode() from nwl_dsi_enable() to set PHY mode to MIPI DPHY
explicitly.
Cc: Guido Günther <[email protected]>
Cc: Robert Chiras <[email protected]>
Cc: Martin Kepplinger <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Jonas Karlman <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: NXP Linux Team <[email protected]>
Reviewed-by: Guido Günther <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
v1->v2:
* Add Guido's R-b tag.
drivers/gpu/drm/bridge/nwl-dsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 66b6740..be6bfc5 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -678,6 +678,12 @@ static int nwl_dsi_enable(struct nwl_dsi *dsi)
return ret;
}
+ ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to set DSI phy mode: %d\n", ret);
+ goto uninit_phy;
+ }
+
ret = phy_configure(dsi->phy, phy_cfg);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
--
2.7.4
Add support for Mixel MIPI DPHY + LVDS PHY combo IP
as found on Freescale i.MX8qxp SoC.
Cc: Guido Günther <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
v1->v2:
* Add the binding for i.MX8qxp Mixel combo PHY based on the converted binding.
(Guido)
.../bindings/phy/mixel,mipi-dsi-phy.yaml | 41 ++++++++++++++++++++--
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
index f869fd2..07b9849 100644
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -14,10 +14,14 @@ description: |
MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
electrical signals for DSI.
+ The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work
+ in either MIPI-DSI PHY mode or LVDS PHY mode.
+
properties:
compatible:
enum:
- fsl,imx8mq-mipi-dphy
+ - fsl,imx8qxp-mipi-dphy
reg:
maxItems: 1
@@ -41,6 +45,11 @@ properties:
"#phy-cells":
const: 0
+ fsl,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle which points to Control and Status Registers(CSR) module.
+
power-domains:
maxItems: 1
@@ -49,12 +58,38 @@ required:
- reg
- clocks
- clock-names
- - assigned-clocks
- - assigned-clock-parents
- - assigned-clock-rates
- "#phy-cells"
- power-domains
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8mq-mipi-dphy
+ then:
+ properties:
+ fsl,syscon: false
+
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
+ - assigned-clock-rates
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qxp-mipi-dphy
+ then:
+ properties:
+ assigned-clocks: false
+ assigned-clock-parents: false
+ assigned-clock-rates: false
+
+ required:
+ - fsl,syscon
+
additionalProperties: false
examples:
--
2.7.4
This patch converts the mixel,mipi-dsi-phy binding to
DT schema format using json-schema.
Comparing to the plain text version, the new binding adds
the 'assigned-clocks', 'assigned-clock-parents' and
'assigned-clock-rates' properites, otherwise 'make dtbs_check'
would complain that there are mis-matches. Also, the new
binding requires the 'power-domains' property since all potential
SoCs that embed this PHY would provide a power domain for it.
The example of the new binding takes reference to the latest
dphy node in imx8mq.dtsi.
Cc: Guido Günther <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
v1->v2:
* Newly introduced in v2. (Guido)
.../devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 29 ---------
.../bindings/phy/mixel,mipi-dsi-phy.yaml | 73 ++++++++++++++++++++++
2 files changed, 73 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
deleted file mode 100644
index 9b23407..00000000
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Mixel DSI PHY for i.MX8
-
-The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
-MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
-electrical signals for DSI.
-
-Required properties:
-- compatible: Must be:
- - "fsl,imx8mq-mipi-dphy"
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
- - "phy_ref": phandle and specifier referring to the DPHY ref clock
-- reg: the register range of the PHY controller
-- #phy-cells: number of cells in PHY, as defined in
- Documentation/devicetree/bindings/phy/phy-bindings.txt
- this must be <0>
-
-Optional properties:
-- power-domains: phandle to power domain
-
-Example:
- dphy: dphy@30a0030 {
- compatible = "fsl,imx8mq-mipi-dphy";
- clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
- clock-names = "phy_ref";
- reg = <0x30a00300 0x100>;
- power-domains = <&pd_mipi0>;
- #phy-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
new file mode 100644
index 00000000..f869fd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel DSI PHY for i.MX8
+
+maintainers:
+ - Guido Günther <[email protected]>
+
+description: |
+ The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+ MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+ electrical signals for DSI.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mq-mipi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: phy_ref
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ assigned-clock-rates:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - assigned-clocks
+ - assigned-clock-parents
+ - assigned-clock-rates
+ - "#phy-cells"
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ dphy: dphy@30a0030 {
+ compatible = "fsl,imx8mq-mipi-dphy";
+ reg = <0x30a00300 0x100>;
+ clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ clock-names = "phy_ref";
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <24000000>;
+ #phy-cells = <0>;
+ power-domains = <&pgc_mipi>;
+ };
--
2.7.4
This patch allows LVDS PHYs to be configured through
the generic functions and through a custom structure
added to the generic union.
The parameters added here are based on common LVDS PHY
implementation practices. The set of parameters
should cover all potential users.
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
v1->v2:
* No change.
include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/phy/phy.h | 4 ++++
2 files changed, 52 insertions(+)
create mode 100644 include/linux/phy/phy-lvds.h
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
new file mode 100644
index 00000000..1b5b9d6
--- /dev/null
+++ b/include/linux/phy/phy-lvds.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef __PHY_LVDS_H_
+#define __PHY_LVDS_H_
+
+/**
+ * struct phy_configure_opts_lvds - LVDS configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * LVDS phy.
+ */
+struct phy_configure_opts_lvds {
+ /**
+ * @bits_per_lane_and_dclk_cycle:
+ *
+ * Number of bits per data lane and differential clock cycle.
+ */
+ unsigned int bits_per_lane_and_dclk_cycle;
+
+ /**
+ * @differential_clk_rate:
+ *
+ * Clock rate, in Hertz, of the LVDS differential clock.
+ */
+ unsigned long differential_clk_rate;
+
+ /**
+ * @lanes:
+ *
+ * Number of active, consecutive, data lanes, starting from
+ * lane 0, used for the transmissions.
+ */
+ unsigned int lanes;
+
+ /**
+ * @is_slave:
+ *
+ * Boolean, true if the phy is a slave which works together
+ * with a master phy to support dual link transmission,
+ * otherwise a regular phy or a master phy.
+ */
+ bool is_slave;
+};
+
+#endif /* __PHY_LVDS_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb..d450b44 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-lvds.h>
#include <linux/phy/phy-mipi-dphy.h>
struct phy;
@@ -51,10 +52,13 @@ enum phy_mode {
* the MIPI_DPHY phy mode.
* @dp: Configuration set applicable for phys supporting
* the DisplayPort protocol.
+ * @lvds: Configuration set applicable for phys supporting
+ * the LVDS phy mode.
*/
union phy_configure_opts {
struct phy_configure_opts_mipi_dphy mipi_dphy;
struct phy_configure_opts_dp dp;
+ struct phy_configure_opts_lvds lvds;
};
/**
--
2.7.4
i.MX8qxp SoC embeds a Mixel MIPI DPHY + LVDS PHY combo which supports
either a MIPI DSI display or a LVDS display. The PHY mode is controlled
by SCU firmware and the driver would call a SCU firmware function to
configure the PHY mode. The single LVDS PHY has 4 data lanes to support
a LVDS display. Also, with a master LVDS PHY and a slave LVDS PHY, they
may work together to support a LVDS display with 8 data lanes(usually, dual
LVDS link display). Note that this patch supports the LVDS PHY mode only
for the i.MX8qxp Mixel combo PHY, i.e., the MIPI DPHY mode is yet to be
supported, so for now error would be returned from ->set_mode() if MIPI
DPHY mode is passed over to it for the combo PHY.
Cc: Guido Günther <[email protected]>
Cc: Robert Chiras <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
Guido, I also print invalid PHY mode from mixel_dphy_configure().
v1->v2:
* Print invalid PHY mode in dmesg. (Guido)
drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 270 ++++++++++++++++++++++++-
1 file changed, 259 insertions(+), 11 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index a95572b..25c97ad 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -4,17 +4,31 @@
* Copyright 2019 Purism SPC
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/svc/misc.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+/* Control and Status Registers(CSR) */
+#define PHY_CTRL 0x00
+#define CCM_MASK GENMASK(7, 5)
+#define CCM(n) FIELD_PREP(CCM_MASK, (n))
+#define CA_MASK GENMASK(4, 2)
+#define CA(n) FIELD_PREP(CA_MASK, (n))
+#define RFB BIT(1)
+#define LVDS_EN BIT(0)
/* DPHY registers */
#define DPHY_PD_DPHY 0x00
@@ -55,8 +69,15 @@
#define PWR_ON 0
#define PWR_OFF 1
+#define MIN_VCO_FREQ 640000000
+#define MAX_VCO_FREQ 1500000000
+
+#define MIN_LVDS_REFCLK_FREQ 24000000
+#define MAX_LVDS_REFCLK_FREQ 150000000
+
enum mixel_dphy_devtype {
MIXEL_IMX8MQ,
+ MIXEL_IMX8QXP,
};
struct mixel_dphy_devdata {
@@ -65,6 +86,7 @@ struct mixel_dphy_devdata {
u8 reg_rxlprp;
u8 reg_rxcdrp;
u8 reg_rxhs_settle;
+ bool is_combo; /* MIPI DPHY and LVDS PHY combo */
};
static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
@@ -74,6 +96,10 @@ static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
.reg_rxlprp = 0x40,
.reg_rxcdrp = 0x44,
.reg_rxhs_settle = 0x48,
+ .is_combo = false,
+ },
+ [MIXEL_IMX8QXP] = {
+ .is_combo = true,
},
};
@@ -95,8 +121,12 @@ struct mixel_dphy_cfg {
struct mixel_dphy_priv {
struct mixel_dphy_cfg cfg;
struct regmap *regmap;
+ struct regmap *lvds_regmap;
struct clk *phy_ref_clk;
const struct mixel_dphy_devdata *devdata;
+ struct imx_sc_ipc *ipc_handle;
+ bool is_slave;
+ int id;
};
static const struct regmap_config mixel_dphy_regmap_config = {
@@ -317,7 +347,8 @@ static int mixel_dphy_set_pll_params(struct phy *phy)
return 0;
}
-static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+static int
+mixel_dphy_configure_mipi_dphy(struct phy *phy, union phy_configure_opts *opts)
{
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
struct mixel_dphy_cfg cfg = { 0 };
@@ -345,15 +376,121 @@ static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
return 0;
}
+static int
+mixel_dphy_configure_lvds_phy(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ struct phy_configure_opts_lvds *lvds_opts = &opts->lvds;
+ unsigned long data_rate;
+ unsigned long fvco;
+ u32 rsc;
+ u32 co;
+ int ret;
+
+ priv->is_slave = lvds_opts->is_slave;
+
+ /* LVDS interface pins */
+ regmap_write(priv->lvds_regmap, PHY_CTRL, CCM(0x5) | CA(0x4) | RFB);
+
+ /* enable MODE8 only for slave LVDS PHY */
+ rsc = priv->id ? IMX_SC_R_MIPI_1 : IMX_SC_R_MIPI_0;
+ ret = imx_sc_misc_set_control(priv->ipc_handle, rsc, IMX_SC_C_DUAL_MODE,
+ lvds_opts->is_slave);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to configure MODE8: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Choose an appropriate divider ratio to meet the requirement of
+ * PLL VCO frequency range.
+ *
+ * ----- 640MHz ~ 1500MHz ------------ ---------------
+ * | VCO | ----------------> | CO divider | -> | LVDS data rate|
+ * ----- FVCO ------------ ---------------
+ * 1/2/4/8 div 7 * differential_clk_rate
+ */
+ data_rate = 7 * lvds_opts->differential_clk_rate;
+ for (co = 1; co <= 8; co *= 2) {
+ fvco = data_rate * co;
+
+ if (fvco >= MIN_VCO_FREQ)
+ break;
+ }
+
+ if (fvco < MIN_VCO_FREQ || fvco > MAX_VCO_FREQ) {
+ dev_err(&phy->dev, "VCO frequency %lu is out of range\n", fvco);
+ return -ERANGE;
+ }
+
+ /*
+ * CO is configurable, while CN and CM are not,
+ * as fixed ratios 1 and 7 are applied respectively.
+ */
+ phy_write(phy, __ffs(co), DPHY_CO);
+
+ /* set reference clock rate */
+ clk_set_rate(priv->phy_ref_clk, lvds_opts->differential_clk_rate);
+
+ return ret;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ if (phy->attrs.mode == PHY_MODE_MIPI_DPHY)
+ return mixel_dphy_configure_mipi_dphy(phy, opts);
+ else if (phy->attrs.mode == PHY_MODE_LVDS)
+ return mixel_dphy_configure_lvds_phy(phy, opts);
+
+ dev_err(&phy->dev,
+ "Failed to configure PHY with invalid PHY mode: %d\n",
+ phy->attrs.mode);
+ return -EINVAL;
+}
+
+static int
+mixel_dphy_validate_lvds_phy(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct phy_configure_opts_lvds *lvds_cfg = &opts->lvds;
+
+ if (lvds_cfg->bits_per_lane_and_dclk_cycle != 7) {
+ dev_err(&phy->dev, "Invalid bits per LVDS data lane: %u\n",
+ lvds_cfg->bits_per_lane_and_dclk_cycle);
+ return -EINVAL;
+ }
+
+ if (lvds_cfg->lanes != 4) {
+ dev_err(&phy->dev, "Invalid LVDS data lanes: %u\n",
+ lvds_cfg->lanes);
+ return -EINVAL;
+ }
+
+ if (lvds_cfg->differential_clk_rate < MIN_LVDS_REFCLK_FREQ ||
+ lvds_cfg->differential_clk_rate > MAX_LVDS_REFCLK_FREQ) {
+ dev_err(&phy->dev,
+ "Invalid LVDS differential clock rate: %lu\n",
+ lvds_cfg->differential_clk_rate);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
union phy_configure_opts *opts)
{
- struct mixel_dphy_cfg cfg = { 0 };
+ if (mode == PHY_MODE_MIPI_DPHY) {
+ struct mixel_dphy_cfg mipi_dphy_cfg = { 0 };
- if (mode != PHY_MODE_MIPI_DPHY)
- return -EINVAL;
+ return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy,
+ &mipi_dphy_cfg);
+ } else if (mode == PHY_MODE_LVDS) {
+ return mixel_dphy_validate_lvds_phy(phy, opts);
+ }
- return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+ dev_err(&phy->dev,
+ "Failed to validate PHY with invalid PHY mode: %d\n", mode);
+ return -EINVAL;
}
static int mixel_dphy_init(struct phy *phy)
@@ -373,27 +510,75 @@ static int mixel_dphy_exit(struct phy *phy)
return 0;
}
-static int mixel_dphy_power_on(struct phy *phy)
+static int mixel_dphy_power_on_mipi_dphy(struct phy *phy)
{
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
u32 locked;
int ret;
- ret = clk_prepare_enable(priv->phy_ref_clk);
- if (ret < 0)
- return ret;
-
phy_write(phy, PWR_ON, DPHY_PD_PLL);
ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
locked, PLL_LOCK_SLEEP,
PLL_LOCK_TIMEOUT);
if (ret < 0) {
dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
- goto clock_disable;
+ return ret;
}
phy_write(phy, PWR_ON, DPHY_PD_DPHY);
return 0;
+}
+
+static int mixel_dphy_power_on_lvds_phy(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ u32 locked;
+ int ret;
+
+ regmap_update_bits(priv->lvds_regmap, PHY_CTRL, LVDS_EN, LVDS_EN);
+
+ phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+ phy_write(phy, PWR_ON, DPHY_PD_PLL);
+
+ /* do not wait for slave LVDS PHY being locked */
+ if (priv->is_slave)
+ return 0;
+
+ ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
+ locked, PLL_LOCK_SLEEP,
+ PLL_LOCK_TIMEOUT);
+ if (ret < 0) {
+ dev_err(&phy->dev, "Could not get LVDS PHY lock (%d)!\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(priv->phy_ref_clk);
+ if (ret < 0)
+ return ret;
+
+ if (phy->attrs.mode == PHY_MODE_MIPI_DPHY) {
+ ret = mixel_dphy_power_on_mipi_dphy(phy);
+ } else if (phy->attrs.mode == PHY_MODE_LVDS) {
+ ret = mixel_dphy_power_on_lvds_phy(phy);
+ } else {
+ dev_err(&phy->dev,
+ "Failed to power on PHY with invalid PHY mode: %d\n",
+ phy->attrs.mode);
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ goto clock_disable;
+
+ return 0;
clock_disable:
clk_disable_unprepare(priv->phy_ref_clk);
return ret;
@@ -406,16 +591,52 @@ static int mixel_dphy_power_off(struct phy *phy)
phy_write(phy, PWR_OFF, DPHY_PD_PLL);
phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+ if (phy->attrs.mode == PHY_MODE_LVDS)
+ regmap_update_bits(priv->lvds_regmap, PHY_CTRL, LVDS_EN, 0);
+
clk_disable_unprepare(priv->phy_ref_clk);
return 0;
}
+static int mixel_dphy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ /* Currently, MIPI DPHY mode only, if it's not a combo PHY. */
+ if (!priv->devdata->is_combo && mode != PHY_MODE_MIPI_DPHY) {
+ dev_err(&phy->dev, "Failed to set PHY mode to MIPI DPHY\n");
+ return -EINVAL;
+ }
+
+ if (priv->devdata->is_combo && mode != PHY_MODE_LVDS) {
+ dev_err(&phy->dev, "Failed to set PHY mode for combo PHY\n");
+ return -EINVAL;
+ }
+
+ if (priv->devdata->is_combo) {
+ u32 rsc = priv->id ? IMX_SC_R_MIPI_1 : IMX_SC_R_MIPI_0;
+
+ ret = imx_sc_misc_set_control(priv->ipc_handle,
+ rsc, IMX_SC_C_MODE,
+ mode == PHY_MODE_LVDS);
+ if (ret) {
+ dev_err(&phy->dev,
+ "Failed to set PHY mode via SCU ipc: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static const struct phy_ops mixel_dphy_phy_ops = {
.init = mixel_dphy_init,
.exit = mixel_dphy_exit,
.power_on = mixel_dphy_power_on,
.power_off = mixel_dphy_power_off,
+ .set_mode = mixel_dphy_set_mode,
.configure = mixel_dphy_configure,
.validate = mixel_dphy_validate,
.owner = THIS_MODULE,
@@ -424,6 +645,8 @@ static const struct phy_ops mixel_dphy_phy_ops = {
static const struct of_device_id mixel_dphy_of_match[] = {
{ .compatible = "fsl,imx8mq-mipi-dphy",
.data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
+ { .compatible = "fsl,imx8qxp-mipi-dphy",
+ .data = &mixel_dphy_devdata[MIXEL_IMX8QXP] },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
@@ -436,6 +659,7 @@ static int mixel_dphy_probe(struct platform_device *pdev)
struct mixel_dphy_priv *priv;
struct phy *phy;
void __iomem *base;
+ int ret;
if (!np)
return -ENODEV;
@@ -467,6 +691,30 @@ static int mixel_dphy_probe(struct platform_device *pdev)
dev_dbg(dev, "phy_ref clock rate: %lu\n",
clk_get_rate(priv->phy_ref_clk));
+ if (priv->devdata->is_combo) {
+ priv->lvds_regmap =
+ syscon_regmap_lookup_by_phandle(np, "fsl,syscon");
+ if (IS_ERR(priv->lvds_regmap)) {
+ ret = PTR_ERR(priv->lvds_regmap);
+ dev_err_probe(dev, ret, "Failed to get LVDS regmap\n");
+ return ret;
+ }
+
+ priv->id = of_alias_get_id(np, "mipi_dphy");
+ if (priv->id < 0) {
+ dev_err(dev, "Failed to get phy node alias id: %d\n",
+ priv->id);
+ return priv->id;
+ }
+
+ ret = imx_scu_get_handle(&priv->ipc_handle);
+ if (ret) {
+ dev_err_probe(dev, ret,
+ "Failed to get SCU ipc handle\n");
+ return ret;
+ }
+ }
+
dev_set_drvdata(dev, priv);
phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
--
2.7.4
On Wed, 09 Dec 2020 14:24:27 +0800, Liu Ying wrote:
> Add support for Mixel MIPI DPHY + LVDS PHY combo IP
> as found on Freescale i.MX8qxp SoC.
>
> Cc: Guido G?nther <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: NXP Linux Team <[email protected]>
> Signed-off-by: Liu Ying <[email protected]>
> ---
> v1->v2:
> * Add the binding for i.MX8qxp Mixel combo PHY based on the converted binding.
> (Guido)
>
> .../bindings/phy/mixel,mipi-dsi-phy.yaml | 41 ++++++++++++++++++++--
> 1 file changed, 38 insertions(+), 3 deletions(-)
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, 09 Dec 2020 14:24:26 +0800, Liu Ying wrote:
> This patch converts the mixel,mipi-dsi-phy binding to
> DT schema format using json-schema.
>
> Comparing to the plain text version, the new binding adds
> the 'assigned-clocks', 'assigned-clock-parents' and
> 'assigned-clock-rates' properites, otherwise 'make dtbs_check'
> would complain that there are mis-matches. Also, the new
> binding requires the 'power-domains' property since all potential
> SoCs that embed this PHY would provide a power domain for it.
> The example of the new binding takes reference to the latest
> dphy node in imx8mq.dtsi.
>
> Cc: Guido G?nther <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: NXP Linux Team <[email protected]>
> Signed-off-by: Liu Ying <[email protected]>
> ---
> v1->v2:
> * Newly introduced in v2. (Guido)
>
> .../devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 29 ---------
> .../bindings/phy/mixel,mipi-dsi-phy.yaml | 73 ++++++++++++++++++++++
> 2 files changed, 73 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
>
Reviewed-by: Rob Herring <[email protected]>