This is the start of the stable review cycle for the 4.9.249 release.
There are 175 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 30 Dec 2020 12:48:23 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.249-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.249-rc1
Jubin Zhong <[email protected]>
PCI: Fix pci_slot_release() NULL pointer dereference
Pawel Wieczorkiewicz <[email protected]>
xen-blkback: set ring->xenblkd to NULL after kthread_stop()
Terry Zhou <[email protected]>
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
Jonathan Cameron <[email protected]>
iio:pressure:mpl3115: Force alignment of buffer
Qinglang Miao <[email protected]>
iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume
Nuno Sá <[email protected]>
iio: buffer: Fix demux update
Sven Eckelmann <[email protected]>
mtd: parser: cmdline: Fix parsing of part-names with colons
Evan Green <[email protected]>
soc: qcom: smp2p: Safely acquire spinlock without IRQs
Lukas Wunner <[email protected]>
spi: st-ssc4: Fix unbalanced pm_runtime_disable() in probe error path
Lukas Wunner <[email protected]>
spi: sc18is602: Don't leak SPI master in probe error path
Lukas Wunner <[email protected]>
spi: rb4xx: Don't leak SPI master in probe error path
Lukas Wunner <[email protected]>
spi: pic32: Don't leak DMA channels in probe error path
Lukas Wunner <[email protected]>
spi: davinci: Fix use-after-free on unbind
Lukas Wunner <[email protected]>
spi: spi-sh: Fix use-after-free on unbind
Zwane Mwaikambo <[email protected]>
drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()
Dave Kleikamp <[email protected]>
jfs: Fix array index bounds check in dbAdjTree
Zhe Li <[email protected]>
jffs2: Fix GC exit abnormally
Luis Henriques <[email protected]>
ceph: fix race in concurrent __ceph_remove_cap invocations
Christophe Leroy <[email protected]>
powerpc/xmon: Change printk() to pr_cont()
Marc Zyngier <[email protected]>
KVM: arm64: Introduce handling of AArch32 TTBCR2 traps
Chunguang Xu <[email protected]>
ext4: fix a memory leak of ext4_free_data
Pavel Machek <[email protected]>
btrfs: fix return value mixup in btrfs_get_extent
Filipe Manana <[email protected]>
Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
Qu Wenruo <[email protected]>
btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()
Qu Wenruo <[email protected]>
btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write unthrottling
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix tx-unthrottle use-after-free
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write-wakeup use-after-free
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix stalled writes
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix write deadlock
Johan Hovold <[email protected]>
USB: serial: keyspan_pda: fix dropped unthrottle interrupts
Johan Hovold <[email protected]>
USB: serial: mos7720: fix parallel-port state restore
Athira Rajeev <[email protected]>
powerpc/perf: Exclude kernel samples while counting events in user space.
Ian Abbott <[email protected]>
staging: comedi: mf6x4: Fix AI end-of-conversion detection
Stefan Haberland <[email protected]>
s390/dasd: fix list corruption of lcu list
Stefan Haberland <[email protected]>
s390/dasd: fix list corruption of pavgroup group list
Stefan Haberland <[email protected]>
s390/dasd: prevent inconsistent LCU device data
Takashi Iwai <[email protected]>
ALSA: usb-audio: Disable sample read check if firmware doesn't give back
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Fix a few more UBSAN fixes
Hui Wang <[email protected]>
ACPI: PNP: compare the string length in the matching_id()
Daniel Scally <[email protected]>
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
Arnd Bergmann <[email protected]>
Input: cyapa_gen6 - fix out-of-bounds stack access
Lukas Wunner <[email protected]>
media: netup_unidvb: Don't leak SPI master in probe error path
Sean Young <[email protected]>
media: sunxi-cir: ensure IR is handled when it is continuous
Alan Stern <[email protected]>
media: gspca: Fix memory leak in probe
Simon Beginn <[email protected]>
Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
Dmitry Torokhov <[email protected]>
Input: cros_ec_keyb - send 'scancodes' in addition to key events
Sara Sharon <[email protected]>
cfg80211: initialize rekey_data
Christophe JAILLET <[email protected]>
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
Dan Carpenter <[email protected]>
qlcnic: Fix error code in probe
Zheng Zengkai <[email protected]>
perf record: Fix memory leak when using '--user-regs=?' to list registers
Zhang Qilong <[email protected]>
clk: ti: Fix memleak in ti_fapll_synth_setup
Manivannan Sadhasivam <[email protected]>
watchdog: qcom: Avoid context switch in restart handler
Vincent Stehlé <[email protected]>
net: korina: fix return value
Christophe JAILLET <[email protected]>
net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function
Christophe JAILLET <[email protected]>
net: bcmgenet: Fix a resource leak in an error handling path in the probe functin
Dwaipayan Ray <[email protected]>
checkpatch: fix unescaped left brace
Vincent Stehlé <[email protected]>
powerpc/ps3: use dma_mapping_error()
Bongsu Jeon <[email protected]>
nfc: s3fwrn5: Release the nfc firmware
Anton Ivanov <[email protected]>
um: chan_xterm: Fix fd leak
Marc Zyngier <[email protected]>
irqchip/alpine-msi: Fix freeing of interrupts on allocation error path
Dan Carpenter <[email protected]>
ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
Marek Szyprowski <[email protected]>
extcon: max77693: Fix modalias string
Dmitry Osipenko <[email protected]>
clk: tegra: Fix duplicated SE clock entry
Masami Hiramatsu <[email protected]>
x86/kprobes: Restore BTF if the single-stepping is cancelled
Cheng Lin <[email protected]>
nfs_common: need lock during iterate through the list
kazuo ito <[email protected]>
nfsd: Fix message level for normal termination
Yang Yingliang <[email protected]>
speakup: fix uninitialized flush_lock
Zhang Qilong <[email protected]>
usb: oxu210hp-hcd: Fix memory leak in oxu_create
Zhang Qilong <[email protected]>
usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe
Nathan Lynch <[email protected]>
powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops
Zhang Changzhong <[email protected]>
scsi: fnic: Fix error return code in fnic_probe()
Arnd Bergmann <[email protected]>
seq_buf: Avoid type mismatch for seq_buf_init
Zhang Qilong <[email protected]>
scsi: pm80xx: Fix error return in pm8001_pci_probe()
Pali Rohár <[email protected]>
cpufreq: scpi: Add missing MODULE_ALIAS
Pali Rohár <[email protected]>
cpufreq: loongson1: Add missing MODULE_ALIAS
Pali Rohár <[email protected]>
cpufreq: st: Add missing MODULE_DEVICE_TABLE
Pali Rohár <[email protected]>
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
Keqian Zhu <[email protected]>
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI
Qinglang Miao <[email protected]>
dm ioctl: fix error return code in target_message
Chuhong Yuan <[email protected]>
ASoC: jz4740-i2s: add missed checks for clk_get()
Jing Xiangfeng <[email protected]>
memstick: r592: Fix error return in r592_probe()
Yu Kuai <[email protected]>
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
Yu Kuai <[email protected]>
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()
Dan Carpenter <[email protected]>
media: saa7146: fix array overflow in vidioc_s_audio()
Jason Gunthorpe <[email protected]>
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
NeilBrown <[email protected]>
NFS: switch nfsiod to be an UNBOUND workqueue.
Calum Mackay <[email protected]>
lockd: don't use interval-based rebinding over TCP
Trond Myklebust <[email protected]>
SUNRPC: xprt_load_transport() needs to support the netid "rdma6"
Olga Kornievskaia <[email protected]>
NFSv4.2: condition READDIR's mask for security label based on LSM state
Alexandre Belloni <[email protected]>
ARM: dts: at91: at91sam9rl: fix ADC triggers
Jing Xiangfeng <[email protected]>
HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()
Qinglang Miao <[email protected]>
mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
Keita Suzuki <[email protected]>
media: siano: fix memory leak of debugfs members in smsdvb_hotplug
Qinglang Miao <[email protected]>
cw1200: fix missing destroy_workqueue() on error in cw1200_init_common
Sebastian Andrzej Siewior <[email protected]>
orinoco: Move context allocation after processing the skb
Cristian Birsan <[email protected]>
ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host
Cristian Birsan <[email protected]>
ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host
Qinglang Miao <[email protected]>
memstick: fix a double-free bug in memstick_check
Kamal Heib <[email protected]>
RDMA/cxgb4: Validate the number of CQEs
Zhihao Cheng <[email protected]>
drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe
Zhang Qilong <[email protected]>
soc: ti: Fix reference imbalance in knav_dma_probe
Zhang Qilong <[email protected]>
soc: ti: knav_qmss: fix reference leak in knav_queue_probe
Zhang Qilong <[email protected]>
crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probe
Christophe Leroy <[email protected]>
powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32
Dmitry Torokhov <[email protected]>
Input: ads7846 - fix unaligned access on 7845
Oleksij Rempel <[email protected]>
Input: ads7846 - fix integer overflow on Rt calculation
Yang Yingliang <[email protected]>
drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()
Qinglang Miao <[email protected]>
media: solo6x10: fix missing snd_card_free in error handling case
Zhang Qilong <[email protected]>
staging: greybus: codecs: Fix reference counter leak in error handling
Necip Fazil Yildiran <[email protected]>
MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA
Arnd Bergmann <[email protected]>
RDMa/mthca: Work around -Wenum-conversion warning
Vincent Bernat <[email protected]>
net: evaluate net.ipv4.conf.all.proxy_arp_pvlan
Vincent Bernat <[email protected]>
net: evaluate net.ipvX.conf.all.ignore_routes_with_linkdown
Zhang Qilong <[email protected]>
spi: tegra114: fix reference leak in tegra spi ops
Zhang Qilong <[email protected]>
spi: tegra20-sflash: fix reference leak in tegra_sflash_resume
Zhang Qilong <[email protected]>
spi: tegra20-slink: fix reference leak in slink ops of tegra20
Zhang Qilong <[email protected]>
spi: spi-ti-qspi: fix reference leak in ti_qspi_setup
Anmol Karn <[email protected]>
Bluetooth: Fix null pointer dereference in hci_event_packet()
Paweł Chmiel <[email protected]>
arm64: dts: exynos: Correct psci compatible used on Exynos7
Cezary Rojewski <[email protected]>
ASoC: pcm: DRAIN support reactivation
Zhang Qilong <[email protected]>
spi: img-spfi: fix reference leak in img_spfi_resume
Christophe Leroy <[email protected]>
crypto: talitos - Fix return type of current_desc_hdr()
Ard Biesheuvel <[email protected]>
ARM: p2v: fix handling of LPAE translation in BE mode
Bob Pearson <[email protected]>
RDMA/rxe: Compute PSN windows correctly
Tom Rix <[email protected]>
drm/gma500: fix double free of gma_connector
Peilin Ye <[email protected]>
Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()
Dae R. Jeong <[email protected]>
md: fix a warning caused by a race between concurrent md_ioctl()s
Antti Palosaari <[email protected]>
media: msi2500: assign SPI bus number dynamically
Alexey Kardashevskiy <[email protected]>
serial_core: Check for port state when tty is in error state
Julian Sax <[email protected]>
HID: i2c-hid: add Vero K147 to descriptor override
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XU
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XU
Fabio Estevam <[email protected]>
usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul
Jack Pham <[email protected]>
usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
Will McVicker <[email protected]>
USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
Will McVicker <[email protected]>
USB: gadget: f_midi: setup SuperSpeed Plus descriptors
taehyun.cho <[email protected]>
USB: gadget: f_acm: add support for SuperSpeed Plus
Johan Hovold <[email protected]>
USB: serial: option: add interface-number sanity check to flag handling
Nicolin Chen <[email protected]>
soc/tegra: fuse: Fix index bug in get_process_id
Thomas Gleixner <[email protected]>
dm table: Remove BUG_ON(in_interrupt())
Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Increase IOCInit request timeout to 30s
Qinglang Miao <[email protected]>
drm/tegra: sor: Disable clocks on error in tegra_sor_init()
Nicholas Piggin <[email protected]>
kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling
Leon Romanovsky <[email protected]>
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
Zhang Qilong <[email protected]>
can: softing: softing_netdev_open(): fix error handling
Randy Dunlap <[email protected]>
scsi: bnx2i: Requires MMU
Andy Shevchenko <[email protected]>
pinctrl: baytrail: Avoid clearing debounce value when turning it off
Andy Shevchenko <[email protected]>
pinctrl: merrifield: Set default bias in case no particular value given
Alexander Sverdlin <[email protected]>
serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Fix potential out-of-bounds shift
Thomas Gleixner <[email protected]>
USB: sisusbvga: Make console support depend on BROKEN
Li Jun <[email protected]>
xhci: Give USB2 ports time to enter U3 in bus suspend
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix control 'access overflow' errors from chmap
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix potential out-of-bounds shift
Oliver Neukum <[email protected]>
USB: add RESET_RESUME quirk for Snapscan 1212
Bui Quang Minh <[email protected]>
USB: dummy-hcd: Fix uninitialized array use in init()
Eric Dumazet <[email protected]>
mac80211: mesh: fix mesh_pathtbl_init() error path
Zhang Changzhong <[email protected]>
net: bridge: vlan: fix error return code in __vlan_add()
Martin Blumenstingl <[email protected]>
net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux
Fugang Duan <[email protected]>
net: stmmac: delete the eee_ctrl_timer after napi disabled
Neal Cardwell <[email protected]>
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
Moshe Shemesh <[email protected]>
net/mlx4_en: Avoid scheduling restart task if it is already running
Lukas Wunner <[email protected]>
spi: Prevent adding devices below an unregistering controller
Dan Carpenter <[email protected]>
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
Coiby Xu <[email protected]>
pinctrl: amd: remove debounce filter setting in IRQ type setting
Chris Chiu <[email protected]>
Input: i8042 - add Acer laptops to the i8042 reset list
Dmitry Torokhov <[email protected]>
Input: cm109 - do not stomp on control URB
Timo Witte <[email protected]>
platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
Vineet Gupta <[email protected]>
ARC: stack unwinding: don't assume non-current task is sleeping
Markus Reichl <[email protected]>
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
Johannes Berg <[email protected]>
iwlwifi: pcie: limit memory read spin time
Nathan Chancellor <[email protected]>
spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
Lukas Wunner <[email protected]>
spi: bcm2835aux: Fix use-after-free on unbind
-------------
Diffstat:
Documentation/networking/ip-sysctl.txt | 3 +
Makefile | 4 +-
arch/arc/kernel/stacktrace.c | 23 +++++---
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 7 +++
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 7 +++
arch/arm/boot/dts/at91sam9rl.dtsi | 19 ++++---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 6 +-
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 28 ++++++++++
arch/arm/boot/dts/exynos5410.dtsi | 4 ++
arch/arm/kernel/head.S | 6 +-
arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 3 +
arch/arm64/include/asm/kvm_host.h | 1 +
arch/arm64/kvm/sys_regs.c | 1 +
arch/mips/bcm47xx/Kconfig | 1 +
arch/powerpc/include/asm/cputable.h | 5 --
arch/powerpc/perf/core-book3s.c | 10 ++++
arch/powerpc/platforms/pseries/suspend.c | 1 -
arch/powerpc/xmon/nonstdio.c | 2 +-
arch/um/drivers/xterm.c | 5 ++
arch/x86/kernel/kprobes/core.c | 5 ++
drivers/acpi/acpi_pnp.c | 3 +
drivers/acpi/resource.c | 2 +-
drivers/block/xen-blkback/xenbus.c | 1 +
drivers/bus/mips_cdmm.c | 4 +-
drivers/clk/clk-s2mps11.c | 1 +
drivers/clk/mvebu/armada-37xx-xtal.c | 4 +-
drivers/clk/tegra/clk-id.h | 1 +
drivers/clk/tegra/clk-tegra-periph.c | 2 +-
drivers/clk/ti/fapll.c | 11 +++-
drivers/clocksource/arm_arch_timer.c | 23 +++++---
drivers/clocksource/cadence_ttc_timer.c | 18 +++---
drivers/cpufreq/highbank-cpufreq.c | 7 +++
drivers/cpufreq/loongson1-cpufreq.c | 1 +
drivers/cpufreq/scpi-cpufreq.c | 1 +
drivers/cpufreq/sti-cpufreq.c | 7 +++
drivers/crypto/omap-aes.c | 3 +-
drivers/crypto/talitos.c | 6 +-
drivers/extcon/extcon-max77693.c | 2 +-
drivers/gpu/drm/drm_dp_aux_dev.c | 2 +-
drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 1 +
drivers/gpu/drm/tegra/sor.c | 10 +++-
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 +++
drivers/hsi/controllers/omap_ssi_core.c | 2 +-
drivers/iio/adc/rockchip_saradc.c | 2 +-
drivers/iio/industrialio-buffer.c | 6 +-
drivers/iio/pressure/mpl3115.c | 9 ++-
drivers/infiniband/core/cm.c | 2 +
drivers/infiniband/hw/cxgb4/cq.c | 3 +
drivers/infiniband/hw/mthca/mthca_cq.c | 2 +-
drivers/infiniband/hw/mthca/mthca_dev.h | 1 -
drivers/infiniband/sw/rxe/rxe_req.c | 3 +-
drivers/input/keyboard/cros_ec_keyb.c | 1 +
drivers/input/misc/cm109.c | 7 ++-
drivers/input/mouse/cyapa_gen6.c | 2 +-
drivers/input/serio/i8042-x86ia64io.h | 42 ++++++++++++++
drivers/input/touchscreen/ads7846.c | 8 ++-
drivers/input/touchscreen/goodix.c | 12 ++++
drivers/irqchip/irq-alpine-msi.c | 3 +-
drivers/md/dm-ioctl.c | 1 +
drivers/md/dm-table.c | 6 --
drivers/md/md.c | 7 ++-
drivers/media/common/siano/smsdvb-main.c | 5 +-
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c | 5 +-
drivers/media/pci/saa7146/mxb.c | 19 ++++---
drivers/media/pci/solo6x10/solo6x10-g723.c | 2 +-
drivers/media/rc/sunxi-cir.c | 2 +
drivers/media/usb/gspca/gspca.c | 1 +
drivers/media/usb/msi2500/msi2500.c | 2 +-
drivers/memstick/core/memstick.c | 1 -
drivers/memstick/host/r592.c | 12 ++--
drivers/mtd/cmdlinepart.c | 14 ++++-
drivers/net/can/softing/softing_main.c | 9 ++-
drivers/net/ethernet/allwinner/sun4i-emac.c | 7 ++-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +-
drivers/net/ethernet/korina.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 20 ++++---
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 7 ++-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 6 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++-
drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 36 +++++++++---
.../net/wireless/intersil/orinoco/orinoco_usb.c | 14 ++---
drivers/net/wireless/st/cw1200/main.c | 2 +
drivers/nfc/s3fwrn5/firmware.c | 4 +-
drivers/pci/slot.c | 6 +-
drivers/pinctrl/intel/pinctrl-baytrail.c | 8 ++-
drivers/pinctrl/intel/pinctrl-merrifield.c | 8 +++
drivers/pinctrl/pinctrl-amd.c | 7 ---
drivers/pinctrl/pinctrl-falcon.c | 14 +++--
drivers/platform/x86/acer-wmi.c | 1 +
drivers/ps3/ps3stor_lib.c | 2 +-
drivers/s390/block/dasd_alias.c | 12 +++-
drivers/scsi/be2iscsi/be_main.c | 4 +-
drivers/scsi/bnx2i/Kconfig | 1 +
drivers/scsi/fnic/fnic_main.c | 1 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 3 +-
drivers/soc/qcom/smp2p.c | 5 +-
drivers/soc/tegra/fuse/speedo-tegra210.c | 2 +-
drivers/soc/ti/knav_dma.c | 13 ++++-
drivers/soc/ti/knav_qmss_queue.c | 4 +-
drivers/spi/Kconfig | 3 +
drivers/spi/spi-bcm2835aux.c | 17 ++----
drivers/spi/spi-davinci.c | 2 +-
drivers/spi/spi-img-spfi.c | 4 +-
drivers/spi/spi-pic32.c | 1 +
drivers/spi/spi-rb4xx.c | 2 +-
drivers/spi/spi-sc18is602.c | 13 +----
drivers/spi/spi-sh.c | 13 ++---
drivers/spi/spi-st-ssc4.c | 5 +-
drivers/spi/spi-tegra114.c | 2 +
drivers/spi/spi-tegra20-sflash.c | 1 +
drivers/spi/spi-tegra20-slink.c | 2 +
drivers/spi/spi-ti-qspi.c | 1 +
drivers/spi/spi.c | 21 ++++++-
drivers/staging/comedi/drivers/mf6x4.c | 3 +-
drivers/staging/greybus/audio_codec.c | 2 +
drivers/staging/speakup/speakup_dectlk.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 5 --
drivers/tty/serial/serial_core.c | 4 ++
drivers/usb/chipidea/ci_hdrc_imx.c | 3 +-
drivers/usb/core/quirks.c | 3 +
drivers/usb/gadget/function/f_acm.c | 2 +-
drivers/usb/gadget/function/f_fs.c | 5 +-
drivers/usb/gadget/function/f_midi.c | 6 ++
drivers/usb/gadget/function/f_rndis.c | 4 +-
drivers/usb/gadget/udc/dummy_hcd.c | 2 +-
drivers/usb/host/ehci-omap.c | 1 +
drivers/usb/host/oxu210hp-hcd.c | 4 +-
drivers/usb/host/xhci-hub.c | 4 ++
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
drivers/usb/serial/keyspan_pda.c | 63 +++++++++++----------
drivers/usb/serial/mos7720.c | 2 +
drivers/usb/serial/option.c | 23 +++++++-
drivers/vfio/pci/vfio_pci.c | 4 +-
drivers/watchdog/qcom-wdt.c | 2 +-
fs/btrfs/inode.c | 2 +-
fs/btrfs/qgroup.c | 4 +-
fs/btrfs/scrub.c | 17 +++---
fs/btrfs/tests/btrfs-tests.c | 8 ++-
fs/ceph/caps.c | 11 +++-
fs/ext4/mballoc.c | 1 +
fs/jffs2/readinode.c | 16 ++++++
fs/jfs/jfs_dmap.h | 2 +-
fs/lockd/host.c | 20 ++++---
fs/nfs/inode.c | 2 +-
fs/nfs/nfs4proc.c | 10 +++-
fs/nfs_common/grace.c | 6 +-
fs/nfsd/nfssvc.c | 3 +-
include/linux/inetdevice.h | 4 +-
include/linux/seq_buf.h | 2 +-
include/linux/sunrpc/xprt.h | 1 +
include/linux/trace_seq.h | 4 +-
kernel/cpu.c | 6 +-
net/bluetooth/hci_event.c | 17 +++---
net/bridge/br_vlan.c | 4 +-
net/ipv4/tcp_output.c | 9 ++-
net/mac80211/mesh_pathtbl.c | 4 +-
net/sunrpc/xprt.c | 65 ++++++++++++++++------
net/sunrpc/xprtrdma/module.c | 1 +
net/sunrpc/xprtrdma/transport.c | 1 +
net/sunrpc/xprtsock.c | 4 ++
net/wireless/nl80211.c | 2 +-
scripts/checkpatch.pl | 2 +-
sound/core/oss/pcm_oss.c | 28 +++++++---
sound/soc/codecs/wm_adsp.c | 5 +-
sound/soc/jz4740/jz4740-i2s.c | 4 ++
sound/soc/soc-pcm.c | 2 +
sound/usb/clock.c | 6 ++
sound/usb/format.c | 2 +
sound/usb/stream.c | 6 +-
tools/perf/util/parse-regs-options.c | 2 +-
174 files changed, 837 insertions(+), 344 deletions(-)
From: Julian Sax <[email protected]>
commit c870d50ce387d84b6438211a7044c60afbd5d60a upstream.
This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Cc: [email protected]
Signed-off-by: Julian Sax <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -397,6 +397,14 @@ static const struct dmi_system_id i2c_hi
},
.driver_data = (void *)&sipodev_desc
},
+ {
+ .ident = "Vero K147",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VERO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "K147"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
{ } /* Terminate list */
};
From: Qinglang Miao <[email protected]>
[ Upstream commit 7ec8a926188eb8e7a3cbaca43ec44f2d7146d71b ]
Add the missing destroy_workqueue() before return from
cw1200_init_common in the error handling case.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/st/cw1200/main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index 84624c812a15f..f4338bce78f4a 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -385,6 +385,7 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
CW1200_LINK_ID_MAX,
cw1200_skb_dtor,
priv)) {
+ destroy_workqueue(priv->workqueue);
ieee80211_free_hw(hw);
return NULL;
}
@@ -396,6 +397,7 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
for (; i > 0; i--)
cw1200_queue_deinit(&priv->tx_queue[i - 1]);
cw1200_queue_stats_deinit(&priv->tx_queue_stats);
+ destroy_workqueue(priv->workqueue);
ieee80211_free_hw(hw);
return NULL;
}
--
2.27.0
From: Cristian Birsan <[email protected]>
[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ]
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 5a53fcf542abb..07133c5ad2944 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -231,6 +231,11 @@
atmel,pins =
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
};
+ pinctrl_usb_default: usb_default {
+ atmel,pins =
+ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -288,6 +293,8 @@
&pioE 3 GPIO_ACTIVE_LOW
&pioE 4 GPIO_ACTIVE_LOW
>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
--
2.27.0
From: Qinglang Miao <[email protected]>
[ Upstream commit e3e9ced5c93803d5b2ea1942c4bf0192622531d6 ]
kfree(host->card) has been called in put_device so that
another kfree would raise cause a double-free bug.
Fixes: 0193383a5833 ("memstick: core: fix device_register() error handling")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Qinglang Miao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/core/memstick.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 1041eb7a61672..2cae85a7ca6de 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -469,7 +469,6 @@ static void memstick_check(struct work_struct *work)
host->card = card;
if (device_register(&card->dev)) {
put_device(&card->dev);
- kfree(host->card);
host->card = NULL;
}
} else
--
2.27.0
From: Alexey Kardashevskiy <[email protected]>
commit 2f70e49ed860020f5abae4f7015018ebc10e1f0e upstream.
At the moment opening a serial device node (such as /dev/ttyS3)
succeeds even if there is no actual serial device behind it.
Reading/writing/ioctls fail as expected because the uart port is not
initialized (the type is PORT_UNKNOWN) and the TTY_IO_ERROR error state
bit is set fot the tty.
However setting line discipline does not have these checks
8250_port.c (8250 is the default choice made by univ8250_console_init()).
As the result of PORT_UNKNOWN, uart_port::iobase is NULL which
a platform translates onto some address accessing which produces a crash
like below.
This adds tty_port_initialized() to uart_set_ldisc() to prevent the crash.
Found by syzkaller.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1415,6 +1415,10 @@ static void uart_set_ldisc(struct tty_st
{
struct uart_state *state = tty->driver_data;
struct uart_port *uport;
+ struct tty_port *port = &state->port;
+
+ if (!tty_port_initialized(port))
+ return;
mutex_lock(&state->port.mutex);
uport = uart_port_check(state);
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit a31eb615646a63370aa1da1053c45439c7653d83 ]
ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.
Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.
Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intersil/orinoco/orinoco_usb.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
index 4e91c74fcfad9..de928938c7a1c 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
@@ -1224,13 +1224,6 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
if (skb->len < ETH_HLEN)
goto drop;
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
- if (!ctx)
- goto busy;
-
- memset(ctx->buf, 0, BULK_BUF_SIZE);
- buf = ctx->buf->data;
-
tx_control = 0;
err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
@@ -1238,6 +1231,13 @@ static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
if (err)
goto drop;
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
+ if (!ctx)
+ goto drop;
+
+ memset(ctx->buf, 0, BULK_BUF_SIZE);
+ buf = ctx->buf->data;
+
{
__le16 *tx_cntl = (__le16 *)buf;
*tx_cntl = cpu_to_le16(tx_control);
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit 45c0cba753641e5d7c3207f04241bd0e7a021698 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in ti_qspi_setup, so we should fix it.
Fixes: 505a14954e2d7 ("spi/qspi: Add qspi flash controller")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-ti-qspi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 4cb72a8e46460..b0a5486936c01 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -175,6 +175,7 @@ static int ti_qspi_setup(struct spi_device *spi)
ret = pm_runtime_get_sync(qspi->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(qspi->dev);
dev_err(qspi->dev, "pm_runtime_get_sync() failed\n");
return ret;
}
--
2.27.0
From: Jing Xiangfeng <[email protected]>
[ Upstream commit 41fff6e19bc8d6d8bca79ea388427c426e72e097 ]
In current code, it jumps to ida_simple_remove() when ida_simple_get()
failes to allocate an ID. Just return to fix it.
Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Jing Xiangfeng <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hsi/controllers/omap_ssi_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hsi/controllers/omap_ssi_core.c b/drivers/hsi/controllers/omap_ssi_core.c
index 9a29b34ed2c82..22cd7169011d1 100644
--- a/drivers/hsi/controllers/omap_ssi_core.c
+++ b/drivers/hsi/controllers/omap_ssi_core.c
@@ -391,7 +391,7 @@ static int ssi_add_controller(struct hsi_controller *ssi,
err = ida_simple_get(&platform_omap_ssi_ida, 0, 0, GFP_KERNEL);
if (err < 0)
- goto out_err;
+ return err;
ssi->id = err;
ssi->owner = THIS_MODULE;
--
2.27.0
From: Sreekanth Reddy <[email protected]>
[ Upstream commit 85dad327d9b58b4c9ce08189a2707167de392d23 ]
Currently the IOCInit request message timeout is set to 10s. This is not
sufficient in some scenarios such as during HBA FW downgrade operations.
Increase the IOCInit request timeout to 30s.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 601a93953307d..16716b2644020 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4477,7 +4477,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
r = _base_handshake_req_reply_wait(ioc,
sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
- sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
+ sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30);
if (r != 0) {
pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
--
2.27.0
From: Paweł Chmiel <[email protected]>
[ Upstream commit e1e47fbca668507a81bb388fcae044b89d112ecc ]
It's not possible to reboot or poweroff Exynos7420 using PSCI. Instead
we need to use syscon reboot/poweroff drivers, like it's done for other
Exynos SoCs. This was confirmed by checking vendor source and testing it
on Samsung Galaxy S6 device based on this SoC.
To be able to use custom restart/poweroff handlers instead of PSCI
functions, we need to correct psci compatible. This also requires us to
provide function ids for CPU_ON and CPU_OFF.
Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6328a66ed97e4..4c7c40ce50662 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -65,8 +65,10 @@
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci";
method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0xC4000003>;
};
soc: soc {
--
2.27.0
From: Christophe Leroy <[email protected]>
[ Upstream commit 78665179e569c7e1fe102fb6c21d0f5b6951f084 ]
On 8xx, we get the following features:
[ 0.000000] cpu_features = 0x0000000000000100
[ 0.000000] possible = 0x0000000000000120
[ 0.000000] always = 0x0000000000000000
This is not correct. As CONFIG_PPC_8xx is mutually exclusive with all
other configurations, the three lines should be equal.
The problem is due to CPU_FTRS_GENERIC_32 which is taken when
CONFIG_BOOK3S_32 is NOT selected. This CPU_FTRS_GENERIC_32 is
pointless because there is no generic configuration supporting
all 32 bits but book3s/32.
Remove this pointless generic features definition to unbreak the
calculation of 'possible' features and 'always' features.
Fixes: 76bc080ef5a3 ("[POWERPC] Make default cputable entries reflect selected CPU family")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/76a85f30bf981d1aeaae00df99321235494da254.1604426550.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/cputable.h | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index cf51aea47510c..090edefe125da 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -419,7 +419,6 @@ enum {
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_CELL_TB_BUG | CPU_FTR_SMT)
-#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
@@ -510,8 +509,6 @@ enum {
CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
CPU_FTRS_CLASSIC32 |
-#else
- CPU_FTRS_GENERIC_32 |
#endif
#ifdef CONFIG_8xx
CPU_FTRS_8XX |
@@ -562,8 +559,6 @@ enum {
CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
CPU_FTRS_CLASSIC32 &
-#else
- CPU_FTRS_GENERIC_32 &
#endif
#ifdef CONFIG_8xx
CPU_FTRS_8XX &
--
2.27.0
From: Qinglang Miao <[email protected]>
[ Upstream commit f0e82242b16826077a2775eacfe201d803bb7a22 ]
kfree(dev) has been called inside put_device so anther
kfree would cause a use-after-free bug/
Fixes: 8286ae03308c ("MIPS: Add CDMM bus support")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Qinglang Miao <[email protected]>
Acked-by: Serge Semin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/mips_cdmm.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 1b14256376d24..7c1da45be166e 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -544,10 +544,8 @@ static void mips_cdmm_bus_discover(struct mips_cdmm_bus *bus)
dev_set_name(&dev->dev, "cdmm%u-%u", cpu, id);
++id;
ret = device_register(&dev->dev);
- if (ret) {
+ if (ret)
put_device(&dev->dev);
- kfree(dev);
- }
}
}
--
2.27.0
From: Fabio Estevam <[email protected]>
commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream.
According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf
ERR007881 also affects i.MX6UL, so pass the
CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.
Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support")
Cc: <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -63,7 +63,8 @@ static const struct ci_hdrc_imx_platform
static const struct ci_hdrc_imx_platform_flag imx6ul_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
- CI_HDRC_TURN_VBUS_EARLY_ON,
+ CI_HDRC_TURN_VBUS_EARLY_ON |
+ CI_HDRC_DISABLE_DEVICE_STREAMING,
};
static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
From: Anmol Karn <[email protected]>
[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ]
AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.
- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:
bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;
Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.
Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index d4c1c34cfa945..d01bf6a111cee 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4350,6 +4350,11 @@ static void hci_phy_link_complete_evt(struct hci_dev *hdev,
return;
}
+ if (!hcon->amp_mgr) {
+ hci_dev_unlock(hdev);
+ return;
+ }
+
if (ev->status) {
hci_conn_del(hcon);
hci_dev_unlock(hdev);
--
2.27.0
From: Takashi Iwai <[email protected]>
commit 175b8d89fe292796811fdee87fa39799a5b6b87a upstream.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/pcm_oss.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2001,11 +2001,15 @@ static int snd_pcm_oss_set_subdivide(str
static int snd_pcm_oss_set_fragment1(struct snd_pcm_substream *substream, unsigned int val)
{
struct snd_pcm_runtime *runtime;
+ int fragshift;
runtime = substream->runtime;
if (runtime->oss.subdivision || runtime->oss.fragshift)
return -EINVAL;
- runtime->oss.fragshift = val & 0xffff;
+ fragshift = val & 0xffff;
+ if (fragshift >= 31)
+ return -EINVAL;
+ runtime->oss.fragshift = fragshift;
runtime->oss.maxfrags = (val >> 16) & 0xffff;
if (runtime->oss.fragshift < 4) /* < 16 */
runtime->oss.fragshift = 4;
From: Arnd Bergmann <[email protected]>
[ Upstream commit d9a9280a0d0ae51dc1d4142138b99242b7ec8ac6 ]
Building with W=2 prints a number of warnings for one function that
has a pointer type mismatch:
linux/seq_buf.h: In function 'seq_buf_init':
linux/seq_buf.h:35:12: warning: pointer targets in assignment from 'unsigned char *' to 'char *' differ in signedness [-Wpointer-sign]
Change the type in the function prototype according to the type in
the structure.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9a7777935c34 ("tracing: Convert seq_buf fields to be like seq_file fields")
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/seq_buf.h | 2 +-
include/linux/trace_seq.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/linux/seq_buf.h b/include/linux/seq_buf.h
index fb7eb9ccb1cd4..d4c3c9bab5826 100644
--- a/include/linux/seq_buf.h
+++ b/include/linux/seq_buf.h
@@ -29,7 +29,7 @@ static inline void seq_buf_clear(struct seq_buf *s)
}
static inline void
-seq_buf_init(struct seq_buf *s, unsigned char *buf, unsigned int size)
+seq_buf_init(struct seq_buf *s, char *buf, unsigned int size)
{
s->buffer = buf;
s->size = size;
diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h
index cfaf5a1d4bad7..f5be2716b01c6 100644
--- a/include/linux/trace_seq.h
+++ b/include/linux/trace_seq.h
@@ -11,7 +11,7 @@
*/
struct trace_seq {
- unsigned char buffer[PAGE_SIZE];
+ char buffer[PAGE_SIZE];
struct seq_buf seq;
int full;
};
@@ -50,7 +50,7 @@ static inline int trace_seq_used(struct trace_seq *s)
* that is about to be written to and then return the result
* of that write.
*/
-static inline unsigned char *
+static inline char *
trace_seq_buffer_ptr(struct trace_seq *s)
{
return s->buffer + seq_buf_used(&s->seq);
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit e5548b05631ec3e6bfdaef1cad28c799545b791b ]
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when adding fails to prevent
memory leak.
Fixes: b92a78e582b1a ("usb host: Oxford OXU210HP HCD driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/oxu210hp-hcd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4e4d601af35c1..2f48da0c0bb39 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3734,8 +3734,10 @@ static struct usb_hcd *oxu_create(struct platform_device *pdev,
oxu->is_otg = otg;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret < 0)
+ if (ret < 0) {
+ usb_put_hcd(hcd);
return ERR_PTR(ret);
+ }
device_wakeup_enable(hcd->self.controller);
return hcd;
--
2.27.0
From: Dmitry Osipenko <[email protected]>
[ Upstream commit 5bf5861d6ea6c3f4b38fc8fda2062b2dc44ac63d ]
The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".
Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <[email protected]>
Reported-by Nicolas Chauvet <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-id.h | 1 +
drivers/clk/tegra/clk-tegra-periph.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 5738635c52741..9f8397c696e6c 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -233,6 +233,7 @@ enum clk_id {
tegra_clk_sdmmc4_8,
tegra_clk_sdmmc4_9,
tegra_clk_se,
+ tegra_clk_se_10,
tegra_clk_soc_therm,
tegra_clk_soc_therm_8,
tegra_clk_sor0,
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index d9c1f229c644b..bf88f90e6c438 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -648,7 +648,7 @@ static struct tegra_periph_init_data periph_clks[] = {
INT8("host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x_8),
INT8("host1x", mux_pllc4_out1_pllc_pllc4_out2_pllp_clkm_plla_pllc4_out0, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x_9),
INT8("se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, TEGRA_PERIPH_ON_APB, tegra_clk_se),
- INT8("se", mux_pllp_pllc2_c_c3_clkm, CLK_SOURCE_SE, 127, TEGRA_PERIPH_ON_APB, tegra_clk_se),
+ INT8("se", mux_pllp_pllc2_c_c3_clkm, CLK_SOURCE_SE, 127, TEGRA_PERIPH_ON_APB, tegra_clk_se_10),
INT8("2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, 0, tegra_clk_gr2d_8),
INT8("3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, 0, tegra_clk_gr3d_8),
INT8("vic03", mux_pllm_pllc_pllp_plla_pllc2_c3_clkm, CLK_SOURCE_VIC03, 178, 0, tegra_clk_vic03),
--
2.27.0
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 4e79f0211b473f8e1eab8211a9fd50cc41a3a061 ]
When running in BE mode on LPAE hardware with a PA-to-VA translation
that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong
byte of the opcode. So fix that, by rotating the offset in r0 to the
right by 8 bits, which will put the 8-bit immediate in bits 31:24.
Note that this will also move bit #22 in its correct place when
applying the rotation to the constant #0x400000.
Fixes: d9a790df8e984 ("ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE")
Acked-by: Nicolas Pitre <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/head.S | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 04286fd9e09ce..2e336acd68b0a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -673,12 +673,8 @@ ARM_BE8(rev16 ip, ip)
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 1b
bx lr
-#else
-#ifdef CONFIG_CPU_ENDIAN_BE8
- moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction
#else
moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
-#endif
b 2f
1: ldr ip, [r7, r3]
#ifdef CONFIG_CPU_ENDIAN_BE8
@@ -687,7 +683,7 @@ ARM_BE8(rev16 ip, ip)
tst ip, #0x000f0000 @ check the rotation field
orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24
biceq ip, ip, #0x00004000 @ clear bit 22
- orreq ip, ip, r0 @ mask in offset bits 7-0
+ orreq ip, ip, r0, ror #8 @ mask in offset bits 7-0
#else
bic ip, ip, #0x000000ff
tst ip, #0xf00 @ check the rotation field
--
2.27.0
From: Zhang Changzhong <[email protected]>
[ Upstream commit d4fc94fe65578738ded138e9fce043db6bfc3241 ]
Return a negative error code from the error handling case instead of 0 as
done elsewhere in this function.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Reported-by: Hulk Robot <[email protected]>
Reviewed-by: Karan Tilak Kumar <[email protected]>
Signed-off-by: Zhang Changzhong <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/fnic/fnic_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 58ce9020d69c5..389c13e1c9788 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -735,6 +735,7 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < FNIC_IO_LOCKS; i++)
spin_lock_init(&fnic->io_req_lock[i]);
+ err = -ENOMEM;
fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache);
if (!fnic->io_req_pool)
goto err_out_free_resources;
--
2.27.0
From: Yu Kuai <[email protected]>
[ Upstream commit eee422c46e6840a81c9db18a497b74387a557b29 ]
If clk_notifier_register() failed, ttc_setup_clockevent() will return
without freeing 'ttcce', which will leak memory.
Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yu Kuai <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/cadence_ttc_timer.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index fbfbdec13b081..7cddc54be96cc 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -418,10 +418,8 @@ static int __init ttc_setup_clockevent(struct clk *clk,
ttcce->ttc.clk = clk;
err = clk_prepare_enable(ttcce->ttc.clk);
- if (err) {
- kfree(ttcce);
- return err;
- }
+ if (err)
+ goto out_kfree;
ttcce->ttc.clk_rate_change_nb.notifier_call =
ttc_rate_change_clockevent_cb;
@@ -431,7 +429,7 @@ static int __init ttc_setup_clockevent(struct clk *clk,
&ttcce->ttc.clk_rate_change_nb);
if (err) {
pr_warn("Unable to register clock notifier.\n");
- return err;
+ goto out_kfree;
}
ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
@@ -460,15 +458,17 @@ static int __init ttc_setup_clockevent(struct clk *clk,
err = request_irq(irq, ttc_clock_event_interrupt,
IRQF_TIMER, ttcce->ce.name, ttcce);
- if (err) {
- kfree(ttcce);
- return err;
- }
+ if (err)
+ goto out_kfree;
clockevents_config_and_register(&ttcce->ce,
ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
return 0;
+
+out_kfree:
+ kfree(ttcce);
+ return err;
}
/**
--
2.27.0
From: Marek Szyprowski <[email protected]>
[ Upstream commit e1efdb604f5c9903a5d92ef42244009d3c04880f ]
The platform device driver name is "max77693-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.
Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device")
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/extcon/extcon-max77693.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 68dbcb814b2ff..4cf72487381e3 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -1272,4 +1272,4 @@ module_platform_driver(max77693_muic_driver);
MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver");
MODULE_AUTHOR("Chanwoo Choi <[email protected]>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:extcon-max77693");
+MODULE_ALIAS("platform:max77693-muic");
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit a042184c7fb99961ea083d4ec192614bec671969 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_spi_setup and
tegra_spi_resume), so we should fix it.
Fixes: f333a331adfac ("spi/tegra114: add spi driver")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra114.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index e37712bed0b2d..d1ca8f619b828 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -801,6 +801,7 @@ static int tegra_spi_setup(struct spi_device *spi)
ret = pm_runtime_get_sync(tspi->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(tspi->dev);
dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);
return ret;
}
@@ -1214,6 +1215,7 @@ static int tegra_spi_resume(struct device *dev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
+ pm_runtime_put_noidle(dev);
dev_err(dev, "pm runtime failed, e = %d\n", ret);
return ret;
}
--
2.27.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 85a7555575a0e48f9b73db310d0d762a08a46d63 ]
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm_adsp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 28eb55bc46634..00dd37f10daff 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1156,7 +1156,7 @@ static int wm_adsp_create_control(struct wm_adsp *dsp,
ctl_work = kzalloc(sizeof(*ctl_work), GFP_KERNEL);
if (!ctl_work) {
ret = -ENOMEM;
- goto err_ctl_cache;
+ goto err_list_del;
}
ctl_work->dsp = dsp;
@@ -1166,7 +1166,8 @@ static int wm_adsp_create_control(struct wm_adsp *dsp,
return 0;
-err_ctl_cache:
+err_list_del:
+ list_del(&ctl->list);
kfree(ctl->cache);
err_ctl_name:
kfree(ctl->name);
--
2.27.0
From: Anton Ivanov <[email protected]>
[ Upstream commit 9431f7c199ab0d02da1482d62255e0b4621cb1b5 ]
xterm serial channel was leaking a fd used in setting up the
port helper
This bug is prehistoric - it predates switching to git. The "fixes"
header here is really just to mark all the versions we would like this to
apply to which is "Anything from the Cretaceous period onwards".
No dinosaurs were harmed in fixing this bug.
Fixes: b40997b872cd ("um: drivers/xterm.c: fix a file descriptor leak")
Signed-off-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/xterm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 20e30be44795b..e3b422ebce09f 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -18,6 +18,7 @@
struct xterm_chan {
int pid;
int helper_pid;
+ int chan_fd;
char *title;
int device;
int raw;
@@ -33,6 +34,7 @@ static void *xterm_init(char *str, int device, const struct chan_opts *opts)
return NULL;
*data = ((struct xterm_chan) { .pid = -1,
.helper_pid = -1,
+ .chan_fd = -1,
.device = device,
.title = opts->xterm_title,
.raw = opts->raw } );
@@ -149,6 +151,7 @@ static int xterm_open(int input, int output, int primary, void *d,
goto out_kill;
}
+ data->chan_fd = fd;
new = xterm_fd(fd, &data->helper_pid);
if (new < 0) {
err = new;
@@ -206,6 +209,8 @@ static void xterm_close(int fd, void *d)
os_kill_process(data->helper_pid, 0);
data->helper_pid = -1;
+ if (data->chan_fd != -1)
+ os_close_file(data->chan_fd);
os_close_file(fd);
}
--
2.27.0
From: Bongsu Jeon <[email protected]>
[ Upstream commit a4485baefa1efa596702ebffd5a9c760d42b14b5 ]
add the code to release the nfc firmware when the firmware image size is
wrong.
Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Bongsu Jeon <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/s3fwrn5/firmware.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c
index 5f97da1947e39..e6ca1f9a7f63e 100644
--- a/drivers/nfc/s3fwrn5/firmware.c
+++ b/drivers/nfc/s3fwrn5/firmware.c
@@ -304,8 +304,10 @@ static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info)
if (ret < 0)
return ret;
- if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE)
+ if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) {
+ release_firmware(fw->fw);
return -EINVAL;
+ }
memcpy(fw->date, fw->fw->data + 0x00, 12);
fw->date[12] = '\0';
--
2.27.0
From: Christophe Leroy <[email protected]>
[ Upstream commit 0237616173fd363a54bd272aa3bd376faa1d7caa ]
current_desc_hdr() returns a u32 but in fact this is a __be32,
leading to a lot of sparse warnings.
Change the return type to __be32 and ensure it is handled as
sure by the caller.
Fixes: 3e721aeb3df3 ("crypto: talitos - handle descriptor not found in error path")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/talitos.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 059c2d4ad18fb..f4a6be76468d5 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -447,7 +447,7 @@ DEF_TALITOS2_DONE(ch1_3, TALITOS2_ISR_CH_1_3_DONE)
/*
* locate current (offending) descriptor
*/
-static u32 current_desc_hdr(struct device *dev, int ch)
+static __be32 current_desc_hdr(struct device *dev, int ch)
{
struct talitos_private *priv = dev_get_drvdata(dev);
int tail, iter;
@@ -478,13 +478,13 @@ static u32 current_desc_hdr(struct device *dev, int ch)
/*
* user diagnostics; report root cause of error based on execution unit status
*/
-static void report_eu_error(struct device *dev, int ch, u32 desc_hdr)
+static void report_eu_error(struct device *dev, int ch, __be32 desc_hdr)
{
struct talitos_private *priv = dev_get_drvdata(dev);
int i;
if (!desc_hdr)
- desc_hdr = in_be32(priv->chan[ch].reg + TALITOS_DESCBUF);
+ desc_hdr = cpu_to_be32(in_be32(priv->chan[ch].reg + TALITOS_DESCBUF));
switch (desc_hdr & DESC_HDR_SEL0_MASK) {
case DESC_HDR_SEL0_AFEU:
--
2.27.0
From: Jason Gunthorpe <[email protected]>
[ Upstream commit 7b06a56d468b756ad6bb43ac21b11e474ebc54a0 ]
commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") allows drivers using mmap to put PCI memory mapped
BAR space into userspace to work correctly on AMD SME systems that default
to all memory encrypted.
Since vfio_pci_mmap_fault() is working with PCI memory mapped BAR space it
should be calling io_remap_pfn_range() otherwise it will not work on SME
systems.
Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking")
Signed-off-by: Jason Gunthorpe <[email protected]>
Acked-by: Peter Xu <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 237d5aceb302d..f9a3da02c631b 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1403,8 +1403,8 @@ static int vfio_pci_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
mutex_unlock(&vdev->vma_lock);
- if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start, vma->vm_page_prot))
+ if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot))
ret = VM_FAULT_SIGBUS;
up_out:
--
2.27.0
From: Alexandre Belloni <[email protected]>
[ Upstream commit 851a95da583c26e2ddeb7281e9b61f0d76ea5aba ]
The triggers for the ADC were taken from at91sam9260 dtsi but are not
correct.
Fixes: a4c1d6c75822 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support")
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91sam9rl.dtsi | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 70adf940d98c0..620aa3f555f8a 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -266,23 +266,26 @@
atmel,adc-use-res = "highres";
trigger0 {
- trigger-name = "timer-counter-0";
+ trigger-name = "external-rising";
trigger-value = <0x1>;
+ trigger-external;
};
+
trigger1 {
- trigger-name = "timer-counter-1";
- trigger-value = <0x3>;
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
};
trigger2 {
- trigger-name = "timer-counter-2";
- trigger-value = <0x5>;
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
};
trigger3 {
- trigger-name = "external";
- trigger-value = <0x13>;
- trigger-external;
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
};
};
--
2.27.0
From: Vincent Bernat <[email protected]>
[ Upstream commit 1af5318c00a8acc33a90537af49b3f23f72a2c4b ]
Introduced in 65324144b50b, the "proxy_arp_vlan" sysctl is a
per-interface sysctl to tune proxy ARP support for private VLANs.
While the "all" variant is exposed, it was a noop and never evaluated.
We use the usual "or" logic for this kind of sysctls.
Fixes: 65324144b50b ("net: RFC3069, private VLAN proxy arp support")
Signed-off-by: Vincent Bernat <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/inetdevice.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 0e6cd645f67f3..65e88c62db7b2 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -100,7 +100,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
#define IN_DEV_LOG_MARTIANS(in_dev) IN_DEV_ORCONF((in_dev), LOG_MARTIANS)
#define IN_DEV_PROXY_ARP(in_dev) IN_DEV_ORCONF((in_dev), PROXY_ARP)
-#define IN_DEV_PROXY_ARP_PVLAN(in_dev) IN_DEV_CONF_GET(in_dev, PROXY_ARP_PVLAN)
+#define IN_DEV_PROXY_ARP_PVLAN(in_dev) IN_DEV_ORCONF((in_dev), PROXY_ARP_PVLAN)
#define IN_DEV_SHARED_MEDIA(in_dev) IN_DEV_ORCONF((in_dev), SHARED_MEDIA)
#define IN_DEV_TX_REDIRECTS(in_dev) IN_DEV_ORCONF((in_dev), SEND_REDIRECTS)
#define IN_DEV_SEC_REDIRECTS(in_dev) IN_DEV_ORCONF((in_dev), \
--
2.27.0
From: Dwaipayan Ray <[email protected]>
[ Upstream commit 03f4935135b9efeb780b970ba023c201f81cf4e6 ]
There is an unescaped left brace in a regex in OPEN_BRACE check. This
throws a runtime error when checkpatch is run with --fix flag and the
OPEN_BRACE check is executed.
Fix it by escaping the left brace.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 8d1824780f2f ("checkpatch: add --fix option for a couple OPEN_BRACE misuses")
Signed-off-by: Dwaipayan Ray <[email protected]>
Acked-by: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/checkpatch.pl | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 9432387dc1789..c3b23244e64ff 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -3818,7 +3818,7 @@ sub process {
$fix) {
fix_delete_line($fixlinenr, $rawline);
my $fixed_line = $rawline;
- $fixed_line =~ /(^..*$Type\s*$Ident\(.*\)\s*){(.*)$/;
+ $fixed_line =~ /(^..*$Type\s*$Ident\(.*\)\s*)\{(.*)$/;
my $line1 = $1;
my $line2 = $2;
fix_insert_line($fixlinenr, ltrim($line1));
--
2.27.0
From: Pali Rohár <[email protected]>
[ Upstream commit 183747ab52654eb406fc6b5bfb40806b75d31811 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: ab0ea257fc58d ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/sti-cpufreq.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index 2cb3346e82d35..c7f0b2df15cdd 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -294,6 +294,13 @@ register_cpufreq_dt:
}
module_init(sti_cpufreq_init);
+static const struct of_device_id __maybe_unused sti_cpufreq_of_match[] = {
+ { .compatible = "st,stih407" },
+ { .compatible = "st,stih410" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sti_cpufreq_of_match);
+
MODULE_DESCRIPTION("STMicroelectronics CPUFreq/OPP driver");
MODULE_AUTHOR("Ajitpal Singh <[email protected]>");
MODULE_AUTHOR("Lee Jones <[email protected]>");
--
2.27.0
From: Takashi Iwai <[email protected]>
commit 11cb881bf075cea41092a20236ba708b18e1dbb2 upstream.
There are a few places that call round{up|down}_pow_of_two() with the
value zero, and this causes undefined behavior warnings. Avoid
calling those macros if such a nonsense value is passed; it's a minor
optimization as well, as we handle it as either an error or a value to
be skipped, instead.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/pcm_oss.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -719,6 +719,8 @@ static int snd_pcm_oss_period_size(struc
oss_buffer_size = snd_pcm_plug_client_size(substream,
snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, NULL)) * oss_frame_size;
+ if (!oss_buffer_size)
+ return -EINVAL;
oss_buffer_size = rounddown_pow_of_two(oss_buffer_size);
if (atomic_read(&substream->mmap_count)) {
if (oss_buffer_size > runtime->oss.mmap_bytes)
@@ -754,17 +756,21 @@ static int snd_pcm_oss_period_size(struc
min_period_size = snd_pcm_plug_client_size(substream,
snd_pcm_hw_param_value_min(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL));
- min_period_size *= oss_frame_size;
- min_period_size = roundup_pow_of_two(min_period_size);
- if (oss_period_size < min_period_size)
- oss_period_size = min_period_size;
+ if (min_period_size) {
+ min_period_size *= oss_frame_size;
+ min_period_size = roundup_pow_of_two(min_period_size);
+ if (oss_period_size < min_period_size)
+ oss_period_size = min_period_size;
+ }
max_period_size = snd_pcm_plug_client_size(substream,
snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL));
- max_period_size *= oss_frame_size;
- max_period_size = rounddown_pow_of_two(max_period_size);
- if (oss_period_size > max_period_size)
- oss_period_size = max_period_size;
+ if (max_period_size) {
+ max_period_size *= oss_frame_size;
+ max_period_size = rounddown_pow_of_two(max_period_size);
+ if (oss_period_size > max_period_size)
+ oss_period_size = max_period_size;
+ }
oss_periods = oss_buffer_size / oss_period_size;
From: Ian Abbott <[email protected]>
commit 56c90457ebfe9422496aac6ef3d3f0f0ea8b2ec2 upstream.
I have had reports from two different people that attempts to read the
analog input channels of the MF624 board fail with an `ETIMEDOUT` error.
After triggering the conversion, the code calls `comedi_timeout()` with
`mf6x4_ai_eoc()` as the callback function to check if the conversion is
complete. The callback returns 0 if complete or `-EBUSY` if not yet
complete. `comedi_timeout()` returns `-ETIMEDOUT` if it has not
completed within a timeout period which is propagated as an error to the
user application.
The existing code considers the conversion to be complete when the EOLC
bit is high. However, according to the user manuals for the MF624 and
MF634 boards, this test is incorrect because EOLC is an active low
signal that goes high when the conversion is triggered, and goes low
when the conversion is complete. Fix the problem by inverting the test
of the EOLC bit state.
Fixes: 04b565021a83 ("comedi: Humusoft MF634 and MF624 DAQ cards driver")
Cc: <[email protected]> # v4.4+
Cc: Rostislav Lisovy <[email protected]>
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/mf6x4.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/mf6x4.c
+++ b/drivers/staging/comedi/drivers/mf6x4.c
@@ -121,8 +121,9 @@ static int mf6x4_ai_eoc(struct comedi_de
struct mf6x4_private *devpriv = dev->private;
unsigned int status;
+ /* EOLC goes low at end of conversion. */
status = ioread32(devpriv->gpioc_reg);
- if (status & MF6X4_GPIOC_EOLC)
+ if ((status & MF6X4_GPIOC_EOLC) == 0)
return 0;
return -EBUSY;
}
From: Athira Rajeev <[email protected]>
commit aa8e21c053d72b6639ea5a7f1d3a1d0209534c94 upstream.
Perf event attritube supports exclude_kernel flag to avoid
sampling/profiling in supervisor state (kernel). Based on this event
attr flag, Monitor Mode Control Register bit is set to freeze on
supervisor state. But sometimes (due to hardware limitation), Sampled
Instruction Address Register (SIAR) locks on to kernel address even
when freeze on supervisor is set. Patch here adds a check to drop
those samples.
Cc: [email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/perf/core-book3s.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2023,6 +2023,16 @@ static void record_and_restart(struct pe
perf_event_update_userpage(event);
/*
+ * Due to hardware limitation, sometimes SIAR could sample a kernel
+ * address even when freeze on supervisor state (kernel) is set in
+ * MMCR2. Check attr.exclude_kernel and address to drop the sample in
+ * these cases.
+ */
+ if (event->attr.exclude_kernel && record)
+ if (is_kernel_addr(mfspr(SPRN_SIAR)))
+ record = 0;
+
+ /*
* Finally record data if requested.
*/
if (record) {
From: Johan Hovold <[email protected]>
commit 7353cad7ee4deaefc16e94727e69285563e219f6 upstream.
The write() callback can be called in interrupt context (e.g. when used
as a console) so interrupts must be disabled while holding the port lock
to prevent a possible deadlock.
Fixes: e81ee637e4ae ("usb-serial: possible irq lock inversion (PPP vs. usb/serial)")
Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <[email protected]> # 2.6.19
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -447,6 +447,7 @@ static int keyspan_pda_write(struct tty_
int request_unthrottle = 0;
int rc = 0;
struct keyspan_pda_private *priv;
+ unsigned long flags;
priv = usb_get_serial_port_data(port);
/* guess how much room is left in the device's ring buffer, and if we
@@ -466,13 +467,13 @@ static int keyspan_pda_write(struct tty_
the TX urb is in-flight (wait until it completes)
the device is full (wait until it says there is room)
*/
- spin_lock_bh(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) {
- spin_unlock_bh(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
clear_bit(0, &port->write_urbs_free);
- spin_unlock_bh(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
/* At this point the URB is in our control, nobody else can submit it
again (the only sudden transition was the one from EINPROGRESS to
From: Johan Hovold <[email protected]>
commit c01d2c58698f710c9e13ba3e2d296328606f74fd upstream.
Make sure to clear the write-busy flag also in case no new data was
submitted due to lack of device buffer space so that writing is
resumed once space again becomes available.
Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <[email protected]> # 2.6.13
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -552,7 +552,7 @@ static int keyspan_pda_write(struct tty_
rc = count;
exit:
- if (rc < 0)
+ if (rc <= 0)
set_bit(0, &port->write_urbs_free);
return rc;
}
From: Christophe JAILLET <[email protected]>
[ Upstream commit 322e53d1e2529ae9d501f5e0f20604a79b873aef ]
'irq_of_parse_and_map()' should be balanced by a corresponding
'irq_dispose_mapping()' call. Otherwise, there is some resources leaks.
Add such a call in the error handling path of the probe function and in the
remove function.
Fixes: 492205050d77 ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/allwinner/sun4i-emac.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 672a8212c8d96..3dc101f7d6bd8 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -827,13 +827,13 @@ static int emac_probe(struct platform_device *pdev)
db->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(db->clk)) {
ret = PTR_ERR(db->clk);
- goto out_iounmap;
+ goto out_dispose_mapping;
}
ret = clk_prepare_enable(db->clk);
if (ret) {
dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
- goto out_iounmap;
+ goto out_dispose_mapping;
}
ret = sunxi_sram_claim(&pdev->dev);
@@ -890,6 +890,8 @@ out_release_sram:
sunxi_sram_release(&pdev->dev);
out_clk_disable_unprepare:
clk_disable_unprepare(db->clk);
+out_dispose_mapping:
+ irq_dispose_mapping(ndev->irq);
out_iounmap:
iounmap(db->membase);
out:
@@ -908,6 +910,7 @@ static int emac_remove(struct platform_device *pdev)
unregister_netdev(ndev);
sunxi_sram_release(&pdev->dev);
clk_disable_unprepare(db->clk);
+ irq_dispose_mapping(ndev->irq);
iounmap(db->membase);
free_netdev(ndev);
--
2.27.0
From: Lukas Wunner <[email protected]>
commit e77df3eca12be4b17f13cf9f215cff248c57d98f upstream.
spi_sh_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: 680c1305e259 ("spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v3.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <[email protected]> # v3.0+
Cc: Axel Lin <[email protected]>
Link: https://lore.kernel.org/r/6d97628b536baf01d5e3e39db61108f84d44c8b2.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-sh.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
--- a/drivers/spi/spi-sh.c
+++ b/drivers/spi/spi-sh.c
@@ -450,7 +450,7 @@ static int spi_sh_probe(struct platform_
return -ENODEV;
}
- master = spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
if (master == NULL) {
dev_err(&pdev->dev, "spi_alloc_master error.\n");
return -ENOMEM;
@@ -468,16 +468,14 @@ static int spi_sh_probe(struct platform_
break;
default:
dev_err(&pdev->dev, "No support width\n");
- ret = -ENODEV;
- goto error1;
+ return -ENODEV;
}
ss->irq = irq;
ss->master = master;
ss->addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (ss->addr == NULL) {
dev_err(&pdev->dev, "ioremap error.\n");
- ret = -ENOMEM;
- goto error1;
+ return -ENOMEM;
}
INIT_LIST_HEAD(&ss->queue);
spin_lock_init(&ss->lock);
@@ -487,7 +485,7 @@ static int spi_sh_probe(struct platform_
ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
if (ret < 0) {
dev_err(&pdev->dev, "request_irq error\n");
- goto error1;
+ return ret;
}
master->num_chipselect = 2;
@@ -506,9 +504,6 @@ static int spi_sh_probe(struct platform_
error3:
free_irq(irq, ss);
- error1:
- spi_master_put(master);
-
return ret;
}
From: Johan Hovold <[email protected]>
commit 320f9028c7873c3c7710e8e93e5c979f4c857490 upstream.
The driver did not update its view of the available device buffer space
until write() was called in task context. This meant that write_room()
would return 0 even after the device had sent a write-unthrottle
notification, something which could lead to blocked writers not being
woken up (e.g. when using OPOST).
Note that we must also request an unthrottle notification is case a
write() request fills the device buffer exactly.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -44,6 +44,8 @@
#define DRIVER_AUTHOR "Brian Warner <[email protected]>"
#define DRIVER_DESC "USB Keyspan PDA Converter driver"
+#define KEYSPAN_TX_THRESHOLD 16
+
struct keyspan_pda_private {
int tx_room;
int tx_throttled;
@@ -114,7 +116,7 @@ static void keyspan_pda_request_unthrott
7, /* request_unthrottle */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
| USB_DIR_OUT,
- 16, /* value: threshold */
+ KEYSPAN_TX_THRESHOLD,
0, /* index */
NULL,
0,
@@ -133,6 +135,8 @@ static void keyspan_pda_rx_interrupt(str
int retval;
int status = urb->status;
struct keyspan_pda_private *priv;
+ unsigned long flags;
+
priv = usb_get_serial_port_data(port);
switch (status) {
@@ -175,7 +179,10 @@ static void keyspan_pda_rx_interrupt(str
case 1: /* modemline change */
break;
case 2: /* tx unthrottle interrupt */
+ spin_lock_irqsave(&port->lock, flags);
priv->tx_throttled = 0;
+ priv->tx_room = max(priv->tx_room, KEYSPAN_TX_THRESHOLD);
+ spin_unlock_irqrestore(&port->lock, flags);
/* queue up a wakeup at scheduler time */
usb_serial_port_softint(port);
break;
@@ -509,7 +516,8 @@ static int keyspan_pda_write(struct tty_
goto exit;
}
}
- if (count > priv->tx_room) {
+
+ if (count >= priv->tx_room) {
/* we're about to completely fill the Tx buffer, so
we'll be throttled afterwards. */
count = priv->tx_room;
@@ -564,14 +572,17 @@ static void keyspan_pda_write_bulk_callb
static int keyspan_pda_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct keyspan_pda_private *priv;
- priv = usb_get_serial_port_data(port);
- /* used by n_tty.c for processing of tabs and such. Giving it our
- conservative guess is probably good enough, but needs testing by
- running a console through the device. */
- return priv->tx_room;
-}
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int room = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (test_bit(0, &port->write_urbs_free) && !priv->tx_throttled)
+ room = priv->tx_room;
+ spin_unlock_irqrestore(&port->lock, flags);
+ return room;
+}
static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
{
From: Sean Young <[email protected]>
commit 3f56df4c8ffeb120ed41906d3aae71799b7e726a upstream.
If a user holds a button down on a remote, then no ir idle interrupt will
be generated until the user releases the button, depending on how quickly
the remote repeats. No IR is processed until that point, which means that
holding down a button may not do anything.
This also resolves an issue on a Cubieboard 1 where the IR receiver is
picking up ambient infrared as IR and spews out endless
"rc rc0: IR event FIFO is full!" messages unless you choose to live in
the dark.
Cc: [email protected]
Tested-by: Hans Verkuil <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reported-by: Hans Verkuil <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/sunxi-cir.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -132,6 +132,8 @@ static irqreturn_t sunxi_ir_irq(int irqn
} else if (status & REG_RXINT_RPEI_EN) {
ir_raw_event_set_idle(ir->rc, true);
ir_raw_event_handle(ir->rc);
+ } else {
+ ir_raw_event_handle(ir->rc);
}
spin_unlock(&ir->ir_lock);
From: Evan Green <[email protected]>
commit fc3e62e25c3896855b7c3d72df19ca6be3459c9f upstream.
smp2p_update_bits() should disable interrupts when it acquires its
spinlock. This is important because without the _irqsave, a priority
inversion can occur.
This function is called both with interrupts enabled in
qcom_q6v5_request_stop(), and with interrupts disabled in
ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be
consistent to avoid the panic notifier deadlocking because it's
sitting on the thread that's already got the lock via _request_stop().
Found via lockdep.
Cc: [email protected]
Fixes: 50e99641413e7 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Evan Green <[email protected]>
Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeid
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/qcom/smp2p.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/soc/qcom/smp2p.c
+++ b/drivers/soc/qcom/smp2p.c
@@ -314,15 +314,16 @@ static int qcom_smp2p_inbound_entry(stru
static int smp2p_update_bits(void *data, u32 mask, u32 value)
{
struct smp2p_entry *entry = data;
+ unsigned long flags;
u32 orig;
u32 val;
- spin_lock(&entry->lock);
+ spin_lock_irqsave(&entry->lock, flags);
val = orig = readl(entry->value);
val &= ~mask;
val |= value;
writel(val, entry->value);
- spin_unlock(&entry->lock);
+ spin_unlock_irqrestore(&entry->lock, flags);
if (val != orig)
qcom_smp2p_kick(entry->smp2p);
From: Yu Kuai <[email protected]>
[ Upstream commit 89cce2b3f247a434ee174ab6803698041df98014 ]
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: e316cb2b16bb ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC")
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-falcon.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
index 0b0fc2eb48e0b..adcdb0585d398 100644
--- a/drivers/pinctrl/pinctrl-falcon.c
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -438,24 +438,28 @@ static int pinctrl_falcon_probe(struct platform_device *pdev)
/* load and remap the pad resources of the different banks */
for_each_compatible_node(np, NULL, "lantiq,pad-falcon") {
- struct platform_device *ppdev = of_find_device_by_node(np);
const __be32 *bank = of_get_property(np, "lantiq,bank", NULL);
struct resource res;
+ struct platform_device *ppdev;
u32 avail;
int pins;
if (!of_device_is_available(np))
continue;
- if (!ppdev) {
- dev_err(&pdev->dev, "failed to find pad pdev\n");
- continue;
- }
if (!bank || *bank >= PORTS)
continue;
if (of_address_to_resource(np, 0, &res))
continue;
+
+ ppdev = of_find_device_by_node(np);
+ if (!ppdev) {
+ dev_err(&pdev->dev, "failed to find pad pdev\n");
+ continue;
+ }
+
falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL);
+ put_device(&ppdev->dev);
if (IS_ERR(falcon_info.clk[*bank])) {
dev_err(&ppdev->dev, "failed to get clock\n");
return PTR_ERR(falcon_info.clk[*bank]);
--
2.27.0
From: Johan Hovold <[email protected]>
commit 975323ab8f116667676c30ca3502a6757bd89e8d upstream.
The parallel-port restore operations is called when a driver claims the
port and is supposed to restore the provided state (e.g. saved when
releasing the port).
Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Cc: stable <[email protected]> # 2.6.35
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/mos7720.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -640,6 +640,8 @@ static void parport_mos7715_restore_stat
spin_unlock(&release_lock);
return;
}
+ mos_parport->shadowDCR = s->u.pc.ctr;
+ mos_parport->shadowECR = s->u.pc.ecr;
write_parport_reg_nonblock(mos_parport, MOS7720_DCR,
mos_parport->shadowDCR);
write_parport_reg_nonblock(mos_parport, MOS7720_ECR,
From: Terry Zhou <[email protected]>
commit 6f37689cf6b38fff96de52e7f0d3e78f22803ba0 upstream.
There is an error in the current code that the XTAL MODE
pin was set to NB MPP1_31 which should be NB MPP1_9.
The latch register of NB MPP1_9 has different offset of 0x8.
Signed-off-by: Terry Zhou <[email protected]>
[pali: Fix pin name in commit message]
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Marek Behún <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/mvebu/armada-37xx-xtal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/clk/mvebu/armada-37xx-xtal.c
+++ b/drivers/clk/mvebu/armada-37xx-xtal.c
@@ -15,8 +15,8 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#define NB_GPIO1_LATCH 0xC
-#define XTAL_MODE BIT(31)
+#define NB_GPIO1_LATCH 0x8
+#define XTAL_MODE BIT(9)
static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
{
From: Marc Zyngier <[email protected]>
[ Upstream commit 3841245e8498a789c65dedd7ffa8fb2fee2c0684 ]
The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.
This code is probably never executed, but let's fix it nonetheless.
Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Antoine Tenart <[email protected]>
Cc: Tsahee Zidenberg <[email protected]>
Cc: Antoine Tenart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-alpine-msi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-alpine-msi.c b/drivers/irqchip/irq-alpine-msi.c
index 63d980995d17d..ac431697ebe1c 100644
--- a/drivers/irqchip/irq-alpine-msi.c
+++ b/drivers/irqchip/irq-alpine-msi.c
@@ -165,8 +165,7 @@ static int alpine_msix_middle_domain_alloc(struct irq_domain *domain,
return 0;
err_sgi:
- while (--i >= 0)
- irq_domain_free_irqs_parent(domain, virq, i);
+ irq_domain_free_irqs_parent(domain, virq, i - 1);
alpine_msix_free_sgi(priv, sgi, nr_irqs);
return err;
}
--
2.27.0
From: Lukas Wunner <[email protected]>
commit 5b8c88462d83331dacb48aeaec8388117fef82e0 upstream.
If the call to devm_gpiod_get_optional() fails on probe of the NXP
SC18IS602/603 SPI driver, the spi_master struct is erroneously not freed.
Fix by switching over to the new devm_spi_alloc_master() helper.
Fixes: f99008013e19 ("spi: sc18is602: Add reset control via gpio pin.")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.9+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <[email protected]> # v4.9+
Cc: Phil Reid <[email protected]>
Link: https://lore.kernel.org/r/d5f715527b894b91d530fe11a86f51b3184a4e1a.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-sc18is602.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -247,13 +247,12 @@ static int sc18is602_probe(struct i2c_cl
struct sc18is602_platform_data *pdata = dev_get_platdata(dev);
struct sc18is602 *hw;
struct spi_master *master;
- int error;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EINVAL;
- master = spi_alloc_master(dev, sizeof(struct sc18is602));
+ master = devm_spi_alloc_master(dev, sizeof(struct sc18is602));
if (!master)
return -ENOMEM;
@@ -304,15 +303,7 @@ static int sc18is602_probe(struct i2c_cl
master->min_speed_hz = hw->freq / 128;
master->max_speed_hz = hw->freq / 4;
- error = devm_spi_register_master(dev, master);
- if (error)
- goto error_reg;
-
- return 0;
-
-error_reg:
- spi_master_put(master);
- return error;
+ return devm_spi_register_master(dev, master);
}
static const struct i2c_device_id sc18is602_id[] = {
From: Zhang Qilong <[email protected]>
[ Upstream commit 8c6239f6e95f583bb763d0228e02d4dd0fb3d492 ]
If clk_register fails, we should goto free branch
before function returns to prevent memleak.
Fixes: 163152cbbe321 ("clk: ti: Add support for FAPLL on dm816x")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/ti/fapll.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c
index 66a0d0ed8b550..02ff499e36536 100644
--- a/drivers/clk/ti/fapll.c
+++ b/drivers/clk/ti/fapll.c
@@ -497,6 +497,7 @@ static struct clk * __init ti_fapll_synth_setup(struct fapll_data *fd,
{
struct clk_init_data *init;
struct fapll_synth *synth;
+ struct clk *clk = ERR_PTR(-ENOMEM);
init = kzalloc(sizeof(*init), GFP_KERNEL);
if (!init)
@@ -519,13 +520,19 @@ static struct clk * __init ti_fapll_synth_setup(struct fapll_data *fd,
synth->hw.init = init;
synth->clk_pll = pll_clk;
- return clk_register(NULL, &synth->hw);
+ clk = clk_register(NULL, &synth->hw);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register clock\n");
+ goto free;
+ }
+
+ return clk;
free:
kfree(synth);
kfree(init);
- return ERR_PTR(-ENOMEM);
+ return clk;
}
static void __init ti_fapll_setup(struct device_node *node)
--
2.27.0
From: Trond Myklebust <[email protected]>
[ Upstream commit d5aa6b22e2258f05317313ecc02efbb988ed6d38 ]
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sunrpc/xprt.h | 1 +
net/sunrpc/xprt.c | 65 +++++++++++++++++++++++++--------
net/sunrpc/xprtrdma/module.c | 1 +
net/sunrpc/xprtrdma/transport.c | 1 +
net/sunrpc/xprtsock.c | 4 ++
5 files changed, 56 insertions(+), 16 deletions(-)
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index a5da60b24d83e..15bab51a3aef1 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -310,6 +310,7 @@ struct xprt_class {
struct rpc_xprt * (*setup)(struct xprt_create *);
struct module *owner;
char name[32];
+ const char * netid[];
};
/*
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 1a8df242d26a1..9491fc81d50ad 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -143,31 +143,64 @@ out:
}
EXPORT_SYMBOL_GPL(xprt_unregister_transport);
+static void
+xprt_class_release(const struct xprt_class *t)
+{
+ module_put(t->owner);
+}
+
+static const struct xprt_class *
+xprt_class_find_by_netid_locked(const char *netid)
+{
+ const struct xprt_class *t;
+ unsigned int i;
+
+ list_for_each_entry(t, &xprt_list, list) {
+ for (i = 0; t->netid[i][0] != '\0'; i++) {
+ if (strcmp(t->netid[i], netid) != 0)
+ continue;
+ if (!try_module_get(t->owner))
+ continue;
+ return t;
+ }
+ }
+ return NULL;
+}
+
+static const struct xprt_class *
+xprt_class_find_by_netid(const char *netid)
+{
+ const struct xprt_class *t;
+
+ spin_lock(&xprt_list_lock);
+ t = xprt_class_find_by_netid_locked(netid);
+ if (!t) {
+ spin_unlock(&xprt_list_lock);
+ request_module("rpc%s", netid);
+ spin_lock(&xprt_list_lock);
+ t = xprt_class_find_by_netid_locked(netid);
+ }
+ spin_unlock(&xprt_list_lock);
+ return t;
+}
+
/**
* xprt_load_transport - load a transport implementation
- * @transport_name: transport to load
+ * @netid: transport to load
*
* Returns:
* 0: transport successfully loaded
* -ENOENT: transport module not available
*/
-int xprt_load_transport(const char *transport_name)
+int xprt_load_transport(const char *netid)
{
- struct xprt_class *t;
- int result;
+ const struct xprt_class *t;
- result = 0;
- spin_lock(&xprt_list_lock);
- list_for_each_entry(t, &xprt_list, list) {
- if (strcmp(t->name, transport_name) == 0) {
- spin_unlock(&xprt_list_lock);
- goto out;
- }
- }
- spin_unlock(&xprt_list_lock);
- result = request_module("xprt%s", transport_name);
-out:
- return result;
+ t = xprt_class_find_by_netid(netid);
+ if (!t)
+ return -ENOENT;
+ xprt_class_release(t);
+ return 0;
}
EXPORT_SYMBOL_GPL(xprt_load_transport);
diff --git a/net/sunrpc/xprtrdma/module.c b/net/sunrpc/xprtrdma/module.c
index 560712bd9fa2c..dd227de31a589 100644
--- a/net/sunrpc/xprtrdma/module.c
+++ b/net/sunrpc/xprtrdma/module.c
@@ -19,6 +19,7 @@ MODULE_DESCRIPTION("RPC/RDMA Transport");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("svcrdma");
MODULE_ALIAS("xprtrdma");
+MODULE_ALIAS("rpcrdma6");
static void __exit rpc_rdma_cleanup(void)
{
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index fa324fe739466..3ea3bb64b6d5c 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -777,6 +777,7 @@ static struct xprt_class xprt_rdma = {
.owner = THIS_MODULE,
.ident = XPRT_TRANSPORT_RDMA,
.setup = xprt_setup_rdma,
+ .netid = { "rdma", "rdma6", "" },
};
void xprt_rdma_cleanup(void)
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index f3f05148922a1..bf20ea2606389 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -3147,6 +3147,7 @@ static struct xprt_class xs_local_transport = {
.owner = THIS_MODULE,
.ident = XPRT_TRANSPORT_LOCAL,
.setup = xs_setup_local,
+ .netid = { "" },
};
static struct xprt_class xs_udp_transport = {
@@ -3155,6 +3156,7 @@ static struct xprt_class xs_udp_transport = {
.owner = THIS_MODULE,
.ident = XPRT_TRANSPORT_UDP,
.setup = xs_setup_udp,
+ .netid = { "udp", "udp6", "" },
};
static struct xprt_class xs_tcp_transport = {
@@ -3163,6 +3165,7 @@ static struct xprt_class xs_tcp_transport = {
.owner = THIS_MODULE,
.ident = XPRT_TRANSPORT_TCP,
.setup = xs_setup_tcp,
+ .netid = { "tcp", "tcp6", "" },
};
static struct xprt_class xs_bc_tcp_transport = {
@@ -3171,6 +3174,7 @@ static struct xprt_class xs_bc_tcp_transport = {
.owner = THIS_MODULE,
.ident = XPRT_TRANSPORT_BC_TCP,
.setup = xs_setup_bc_tcp,
+ .netid = { "" },
};
/**
--
2.27.0
From: Stefan Haberland <[email protected]>
commit 0ede91f83aa335da1c3ec68eb0f9e228f269f6d8 upstream.
dasd_alias_add_device() moves devices to the active_devices list in case
of a scheduled LCU update regardless if they have previously been in a
pavgroup or not.
Example: device A and B are in the same pavgroup.
Device A has already been in a pavgroup and the private->pavgroup pointer
is set and points to a valid pavgroup. While going through dasd_add_device
it is moved from the pavgroup to the active_devices list.
In parallel device B might be removed from the same pavgroup in
remove_device_from_lcu() which in turn checks if the group is empty
and deletes it accordingly because device A has already been removed from
there.
When now device A enters remove_device_from_lcu() it is tried to remove it
from the pavgroup again because the pavgroup pointer is still set and again
the empty group will be cleaned up which leads to a list corruption.
Fix by setting private->pavgroup to NULL in dasd_add_device.
If the device has been the last device on the pavgroup an empty pavgroup
remains but this will be cleaned up by the scheduled lcu_update which
iterates over all existing pavgroups.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/block/dasd_alias.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -633,6 +633,7 @@ int dasd_alias_add_device(struct dasd_de
}
if (lcu->flags & UPDATE_PENDING) {
list_move(&device->alias_list, &lcu->active_devices);
+ private->pavgroup = NULL;
_schedule_lcu_update(lcu, device);
}
spin_unlock_irqrestore(&lcu->lock, flags);
From: Qinglang Miao <[email protected]>
[ Upstream commit 4d7659bfbe277a43399a4a2d90fca141e70f29e1 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 2ca4c92f58f9 ("dm ioctl: prevent empty message")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-ioctl.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 6964b252952a4..836a2808c0c71 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1549,6 +1549,7 @@ static int target_message(struct dm_ioctl *param, size_t param_size)
if (!argc) {
DMWARN("Empty message received.");
+ r = -EINVAL;
goto out_argv;
}
--
2.27.0
From: Zwane Mwaikambo <[email protected]>
commit 73b62cdb93b68d7e2c1d373c6a411bc00c53e702 upstream.
I observed this when unplugging a DP monitor whilst a computer is asleep
and then waking it up. This left DP chardev nodes still being present on
the filesystem and accessing these device nodes caused an oops because
drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened.
This can also be reproduced by creating a device node with mknod(1) and
issuing an open(2)
[166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018
[166164.933202] #PF: supervisor read access in kernel mode
[166164.933204] #PF: error_code(0x0000) - not-present page
[166164.933205] PGD 0 P4D 0
[166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI
[166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G W
5.8.0-rc6+ #1
[166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W
(1.11 ) 04/21/2020
[166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70
[drm_kms_helper]
[166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7
c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6
<8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1
[166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246
[166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000
[166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180
[166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0
[166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003
[166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000
[166164.933244] FS: 00007f7fb041eb00(0000) GS:ffff8a9411500000(0000)
knlGS:0000000000000000
[166164.933245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0
[166164.933247] Call Trace:
[166164.933264] auxdev_open+0x1b/0x40 [drm_kms_helper]
[166164.933278] chrdev_open+0xa7/0x1c0
[166164.933282] ? cdev_put.part.0+0x20/0x20
[166164.933287] do_dentry_open+0x161/0x3c0
[166164.933291] vfs_open+0x2d/0x30
[166164.933297] path_openat+0xb27/0x10e0
[166164.933306] ? atime_needs_update+0x73/0xd0
[166164.933309] do_filp_open+0x91/0x100
[166164.933313] ? __alloc_fd+0xb2/0x150
[166164.933316] do_sys_openat2+0x210/0x2d0
[166164.933318] do_sys_open+0x46/0x80
[166164.933320] __x64_sys_openat+0x20/0x30
[166164.933328] do_syscall_64+0x52/0xc0
[166164.933336] entry_SYSCALL_64_after_hwframe+0x44/0xa9
(gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29
Dump of assembler code for function drm_dp_aux_dev_get_by_minor:
0x0000000000017b10 <+0>: callq 0x17b15 <drm_dp_aux_dev_get_by_minor+5>
0x0000000000017b15 <+5>: push %rbp
0x0000000000017b16 <+6>: mov %rsp,%rbp
0x0000000000017b19 <+9>: push %r12
0x0000000000017b1b <+11>: mov %edi,%r12d
0x0000000000017b1e <+14>: mov $0x0,%rdi
0x0000000000017b25 <+21>: callq 0x17b2a <drm_dp_aux_dev_get_by_minor+26>
0x0000000000017b2a <+26>: mov %r12d,%esi
0x0000000000017b2d <+29>: mov $0x0,%rdi
0x0000000000017b34 <+36>: callq 0x17b39 <drm_dp_aux_dev_get_by_minor+41>
0x0000000000017b39 <+41>: mov 0x18(%rax),%edx <=========
0x0000000000017b3c <+44>: mov %rax,%r12
0x0000000000017b3f <+47>: lea 0x18(%rax),%rdi
0x0000000000017b43 <+51>: test %edx,%edx
0x0000000000017b45 <+53>: je 0x17b7a <drm_dp_aux_dev_get_by_minor+106>
0x0000000000017b47 <+55>: lea 0x1(%rdx),%ecx
0x0000000000017b4a <+58>: mov %edx,%eax
0x0000000000017b4c <+60>: lock cmpxchg %ecx,(%rdi)
0x0000000000017b50 <+64>: jne 0x17b76 <drm_dp_aux_dev_get_by_minor+102>
0x0000000000017b52 <+66>: test %edx,%edx
0x0000000000017b54 <+68>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93>
0x0000000000017b56 <+70>: test %ecx,%ecx
0x0000000000017b58 <+72>: js 0x17b6d <drm_dp_aux_dev_get_by_minor+93>
0x0000000000017b5a <+74>: mov $0x0,%rdi
0x0000000000017b61 <+81>: callq 0x17b66 <drm_dp_aux_dev_get_by_minor+86>
0x0000000000017b66 <+86>: mov %r12,%rax
0x0000000000017b69 <+89>: pop %r12
0x0000000000017b6b <+91>: pop %rbp
0x0000000000017b6c <+92>: retq
0x0000000000017b6d <+93>: xor %esi,%esi
0x0000000000017b6f <+95>: callq 0x17b74 <drm_dp_aux_dev_get_by_minor+100>
0x0000000000017b74 <+100>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74>
0x0000000000017b76 <+102>: mov %eax,%edx
0x0000000000017b78 <+104>: jmp 0x17b43 <drm_dp_aux_dev_get_by_minor+51>
0x0000000000017b7a <+106>: xor %r12d,%r12d
0x0000000000017b7d <+109>: jmp 0x17b5a <drm_dp_aux_dev_get_by_minor+74>
End of assembler dump.
(gdb) list *drm_dp_aux_dev_get_by_minor+0x29
0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65).
60 static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index)
61 {
62 struct drm_dp_aux_dev *aux_dev = NULL;
63
64 mutex_lock(&aux_idr_mutex);
65 aux_dev = idr_find(&aux_idr, index);
66 if (!kref_get_unless_zero(&aux_dev->refcount))
67 aux_dev = NULL;
68 mutex_unlock(&aux_idr_mutex);
69
(gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount
$8 = 0x18
Looking at the caller, checks on the minor are pushed down to
drm_dp_aux_dev_get_by_minor()
static int auxdev_open(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct drm_dp_aux_dev *aux_dev;
aux_dev = drm_dp_aux_dev_get_by_minor(minor); <====
if (!aux_dev)
return -ENODEV;
file->private_data = aux_dev;
return 0;
}
Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.")
Cc: <[email protected]> # v4.6+
Signed-off-by: Zwane Mwaikambo <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
[added Cc to stable]
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_aux_dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_dp_aux_dev.c
+++ b/drivers/gpu/drm/drm_dp_aux_dev.c
@@ -59,7 +59,7 @@ static struct drm_dp_aux_dev *drm_dp_aux
mutex_lock(&aux_idr_mutex);
aux_dev = idr_find(&aux_idr, index);
- if (!kref_get_unless_zero(&aux_dev->refcount))
+ if (aux_dev && !kref_get_unless_zero(&aux_dev->refcount))
aux_dev = NULL;
mutex_unlock(&aux_idr_mutex);
From: Zhe Li <[email protected]>
commit 9afc9a8a4909fece0e911e72b1060614ba2f7969 upstream.
The log of this problem is:
jffs2: Error garbage collecting node at 0x***!
jffs2: No space for garbage collection. Aborting GC thread
This is because GC believe that it do nothing, so it abort.
After going over the image of jffs2, I find a scene that
can trigger this problem stably.
The scene is: there is a normal dirent node at summary-area,
but abnormal at corresponding not-summary-area with error
name_crc.
The reason that GC exit abnormally is because it find that
abnormal dirent node to GC, but when it goes to function
jffs2_add_fd_to_list, it cannot meet the condition listed
below:
if ((*prev)->nhash == new->nhash && !strcmp((*prev)->name, new->name))
So no node is marked obsolete, statistical information of
erase_block do not change, which cause GC exit abnormally.
The root cause of this problem is: we do not check the
name_crc of the abnormal dirent node with summary is enabled.
Noticed that in function jffs2_scan_dirent_node, we use
function jffs2_scan_dirty_space to deal with the dirent
node with error name_crc. So this patch add a checking
code in function read_direntry to ensure the correctness
of dirent node. If checked failed, the dirent node will
be marked obsolete so GC will pass this node and this
problem will be fixed.
Cc: <[email protected]>
Signed-off-by: Zhe Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/readinode.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -672,6 +672,22 @@ static inline int read_direntry(struct j
jffs2_free_full_dirent(fd);
return -EIO;
}
+
+#ifdef CONFIG_JFFS2_SUMMARY
+ /*
+ * we use CONFIG_JFFS2_SUMMARY because without it, we
+ * have checked it while mounting
+ */
+ crc = crc32(0, fd->name, rd->nsize);
+ if (unlikely(crc != je32_to_cpu(rd->name_crc))) {
+ JFFS2_NOTICE("name CRC failed on dirent node at"
+ "%#08x: read %#08x,calculated %#08x\n",
+ ref_offset(ref), je32_to_cpu(rd->node_crc), crc);
+ jffs2_mark_node_obsolete(c, ref);
+ jffs2_free_full_dirent(fd);
+ return 0;
+ }
+#endif
}
fd->nhash = full_name_hash(NULL, fd->name, rd->nsize);
From: Qu Wenruo <[email protected]>
commit 665d4953cde6d9e75c62a07ec8f4f8fd7d396ade upstream
In commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device
replace") we removed the branch of copy_nocow_pages() to avoid
corruption for compressed nodatasum extents.
However above commit only solves the problem in scrub_extent(), if
during scrub_pages() we failed to read some pages,
sctx->no_io_error_seen will be non-zero and we go to fixup function
scrub_handle_errored_block().
In scrub_handle_errored_block(), for sctx without csum (no matter if
we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine,
which does the similar thing with copy_nocow_pages(), but does it
without the extra check in copy_nocow_pages() routine.
So for test cases like btrfs/100, where we emulate read errors during
replace/scrub, we could corrupt compressed extent data again.
This patch will fix it just by avoiding any "optimization" for
nodatasum, just falls back to the normal fixup routine by try read from
any good copy.
This also solves WARN_ON() or dead lock caused by lame backref iteration
in scrub_fixup_nodatasum() routine.
The deadlock or WARN_ON() won't be triggered before commit ac0b4145d662
("btrfs: scrub: Don't use inode pages for device replace") since
copy_nocow_pages() have better locking and extra check for data extent,
and it's already doing the fixup work by try to read data from any good
copy, so it won't go scrub_fixup_nodatasum() anyway.
This patch disables the faulty code and will be removed completely in a
followup patch.
Fixes: ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace")
Signed-off-by: Qu Wenruo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/scrub.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -919,11 +919,6 @@ static int scrub_handle_errored_block(st
have_csum = sblock_to_check->pagev[0]->have_csum;
dev = sblock_to_check->pagev[0]->dev;
- if (sctx->is_dev_replace && !is_metadata && !have_csum) {
- sblocks_for_recheck = NULL;
- goto nodatasum_case;
- }
-
/*
* read all mirrors one after the other. This includes to
* re-read the extent or metadata block that failed (that was
@@ -1036,13 +1031,19 @@ static int scrub_handle_errored_block(st
goto out;
}
- if (!is_metadata && !have_csum) {
+ /*
+ * NOTE: Even for nodatasum case, it's still possible that it's a
+ * compressed data extent, thus scrub_fixup_nodatasum(), which write
+ * inode page cache onto disk, could cause serious data corruption.
+ *
+ * So here we could only read from disk, and hope our recovery could
+ * reach disk before the newer write.
+ */
+ if (0 && !is_metadata && !have_csum) {
struct scrub_fixup_nodatasum *fixup_nodatasum;
WARN_ON(sctx->is_dev_replace);
-nodatasum_case:
-
/*
* !is_metadata and !have_csum, this means that the data
* might not be COWed, that it might be modified
From: Stefan Haberland <[email protected]>
commit 53a7f655834c7c335bf683f248208d4fbe4b47bc upstream.
In dasd_alias_disconnect_device_from_lcu the device is removed from any
list on the LCU. Afterwards the LCU is removed from the lcu list if it
does not contain devices any longer.
The lcu->lock protects the lcu from parallel updates. But to cancel all
workers and wait for completion the lcu->lock has to be unlocked.
If two devices are removed in parallel and both are removed from the LCU
the first device that takes the lcu->lock again will delete the LCU because
it is already empty but the second device also tries to free the LCU which
leads to a list corruption of the lcu list.
Fix by removing the device right before the lcu is checked without
unlocking the lcu->lock in between.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/block/dasd_alias.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -255,7 +255,6 @@ void dasd_alias_disconnect_device_from_l
return;
device->discipline->get_uid(device, &uid);
spin_lock_irqsave(&lcu->lock, flags);
- list_del_init(&device->alias_list);
/* make sure that the workers don't use this device */
if (device == lcu->suc_data.device) {
spin_unlock_irqrestore(&lcu->lock, flags);
@@ -282,6 +281,7 @@ void dasd_alias_disconnect_device_from_l
spin_lock_irqsave(&aliastree.lock, flags);
spin_lock(&lcu->lock);
+ list_del_init(&device->alias_list);
if (list_empty(&lcu->grouplist) &&
list_empty(&lcu->active_devices) &&
list_empty(&lcu->inactive_devices)) {
From: Sven Eckelmann <[email protected]>
commit 639a82434f16a6df0ce0e7c8595976f1293940fd upstream.
Some devices (especially QCA ones) are already using hardcoded partition
names with colons in it. The OpenMesh A62 for example provides following
mtd relevant information via cmdline:
root=31:11 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(custom),64k(0:KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) rootfsname=rootfs rootwait
The change to split only on the last colon between mtd-id and partitions
will cause newpart to see following string for the first partition:
KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive)
Such a partition list cannot be parsed and thus the device fails to boot.
Avoid this behavior by making sure that the start of the first part-name
("(") will also be the last byte the mtd-id split algorithm is using for
its colon search.
Fixes: eb13fa022741 ("mtd: parser: cmdline: Support MTD names containing one or more colons")
Cc: [email protected]
Cc: Ron Minnich <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/cmdlinepart.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -228,7 +228,7 @@ static int mtdpart_setup_real(char *s)
struct cmdline_mtd_partition *this_mtd;
struct mtd_partition *parts;
int mtd_id_len, num_parts;
- char *p, *mtd_id, *semicol;
+ char *p, *mtd_id, *semicol, *open_parenth;
/*
* Replace the first ';' by a NULL char so strrchr can work
@@ -238,6 +238,14 @@ static int mtdpart_setup_real(char *s)
if (semicol)
*semicol = '\0';
+ /*
+ * make sure that part-names with ":" will not be handled as
+ * part of the mtd-id with an ":"
+ */
+ open_parenth = strchr(s, '(');
+ if (open_parenth)
+ *open_parenth = '\0';
+
mtd_id = s;
/*
@@ -247,6 +255,10 @@ static int mtdpart_setup_real(char *s)
*/
p = strrchr(s, ':');
+ /* Restore the '(' now. */
+ if (open_parenth)
+ *open_parenth = '(';
+
/* Restore the ';' now. */
if (semicol)
*semicol = ';';
From: Stefan Haberland <[email protected]>
commit a29ea01653493b94ea12bb2b89d1564a265081b6 upstream.
Prevent _lcu_update from adding a device to a pavgroup if the LCU still
requires an update. The data is not reliable any longer and in parallel
devices might have been moved on the lists already.
This might lead to list corruptions or invalid PAV grouping.
Only add devices to a pavgroup if the LCU is up to date. Additional steps
are taken by the scheduled lcu update.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/block/dasd_alias.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -502,6 +502,14 @@ static int _lcu_update(struct dasd_devic
return rc;
spin_lock_irqsave(&lcu->lock, flags);
+ /*
+ * there is another update needed skip the remaining handling
+ * the data might already be outdated
+ * but especially do not add the device to an LCU with pending
+ * update
+ */
+ if (lcu->flags & NEED_UAC_UPDATE)
+ goto out;
lcu->pav = NO_PAV;
for (i = 0; i < MAX_DEVICES_PER_LCU; ++i) {
switch (lcu->uac->unit[i].ua_type) {
@@ -520,6 +528,7 @@ static int _lcu_update(struct dasd_devic
alias_list) {
_add_device_to_lcu(lcu, device, refdev);
}
+out:
spin_unlock_irqrestore(&lcu->lock, flags);
return 0;
}
From: Marc Zyngier <[email protected]>
commit ca4e514774930f30b66375a974b5edcbebaf0e7e upstream.
ARMv8.2 introduced TTBCR2, which shares TCR_EL1 with TTBCR.
Gracefully handle traps to this register when HCR_EL2.TVM is set.
Cc: [email protected]
Reported-by: James Morse <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/kvm_host.h | 1 +
arch/arm64/kvm/sys_regs.c | 1 +
2 files changed, 2 insertions(+)
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -161,6 +161,7 @@ enum vcpu_sysreg {
#define c2_TTBR1 (TTBR1_EL1 * 2) /* Translation Table Base Register 1 */
#define c2_TTBR1_high (c2_TTBR1 + 1) /* TTBR1 top 32 bits */
#define c2_TTBCR (TCR_EL1 * 2) /* Translation Table Base Control R. */
+#define c2_TTBCR2 (c2_TTBCR + 1) /* Translation Table Base Control R. 2 */
#define c3_DACR (DACR32_EL2 * 2)/* Domain Access Control Register */
#define c5_DFSR (ESR_EL1 * 2) /* Data Fault Status Register */
#define c5_IFSR (IFSR32_EL2 * 2)/* Instruction Fault Status Register */
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1315,6 +1315,7 @@ static const struct sys_reg_desc cp15_re
{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
+ { Op1( 0), CRn( 2), CRm( 0), Op2( 3), access_vm_reg, NULL, c2_TTBCR2 },
{ Op1( 0), CRn( 3), CRm( 0), Op2( 0), access_vm_reg, NULL, c3_DACR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 0), access_vm_reg, NULL, c5_DFSR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 1), access_vm_reg, NULL, c5_IFSR },
From: Pawel Wieczorkiewicz <[email protected]>
commit 1c728719a4da6e654afb9cc047164755072ed7c9 upstream.
When xen_blkif_disconnect() is called, the kernel thread behind the
block interface is stopped by calling kthread_stop(ring->xenblkd).
The ring->xenblkd thread pointer being non-NULL determines if the
thread has been already stopped.
Normally, the thread's function xen_blkif_schedule() sets the
ring->xenblkd to NULL, when the thread's main loop ends.
However, when the thread has not been started yet (i.e.
wake_up_process() has not been called on it), the xen_blkif_schedule()
function would not be called yet.
In such case the kthread_stop() call returns -EINTR and the
ring->xenblkd remains dangling.
When this happens, any consecutive call to xen_blkif_disconnect (for
example in frontend_changed() callback) leads to a kernel crash in
kthread_stop() (e.g. NULL pointer dereference in exit_creds()).
This is XSA-350.
Cc: <[email protected]> # 4.12
Fixes: a24fa22ce22a ("xen/blkback: don't use xen_blkif_get() in xen-blkback kthread")
Reported-by: Olivier Benjamin <[email protected]>
Reported-by: Pawel Wieczorkiewicz <[email protected]>
Signed-off-by: Pawel Wieczorkiewicz <[email protected]>
Reviewed-by: Julien Grall <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/xen-blkback/xenbus.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -262,6 +262,7 @@ static int xen_blkif_disconnect(struct x
if (ring->xenblkd) {
kthread_stop(ring->xenblkd);
+ ring->xenblkd = NULL;
wake_up(&ring->shutdown_wq);
}
From: Chunguang Xu <[email protected]>
commit cca415537244f6102cbb09b5b90db6ae2c953bdd upstream.
When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list. After the current
transaction is committed, the object will be freed.
ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked. Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.
Signed-off-by: Chunguang Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/mballoc.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4650,6 +4650,7 @@ ext4_mb_free_metadata(handle_t *handle,
ext4_group_first_block_no(sb, group) +
EXT4_C2B(sbi, cluster),
"Block already on to-be-freed list");
+ kmem_cache_free(ext4_free_data_cachep, new_entry);
return 0;
}
}
From: Qu Wenruo <[email protected]>
commoit 6f7de19ed3d4d3526ca5eca428009f97cf969c2f upstream
Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf
of extent tree") added a new exit for rescan finish.
However after finishing quota rescan, we set
fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the
original exit path.
While we missed that assignment of (u64)-1 in the new exit path.
The end result is, the quota status item doesn't have the same value.
(-1 vs the last bytenr + 1)
Although it doesn't affect quota accounting, it's still better to keep
the original behavior.
Reported-by: Misono Tomohiro <[email protected]>
Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree")
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: Misono Tomohiro <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/qgroup.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2340,8 +2340,10 @@ out:
}
btrfs_put_tree_mod_seq(fs_info, &tree_mod_seq_elem);
- if (done && !ret)
+ if (done && !ret) {
ret = 1;
+ fs_info->qgroup_rescan_progress.objectid = (u64)-1;
+ }
return ret;
}
From: Pavel Machek <[email protected]>
commit 881a3a11c2b858fe9b69ef79ac5ee9978a266dc9 upstream
btrfs_get_extent() sets variable ret, but out: error path expect error
to be in variable err so the error code is lost.
Fixes: 6bf9e4bd6a27 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
CC: [email protected] # 5.4+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Pavel Machek (CIP) <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7000,7 +7000,7 @@ again:
found_type == BTRFS_FILE_EXTENT_PREALLOC) {
/* Only regular file could have regular/prealloc extent */
if (!S_ISREG(inode->i_mode)) {
- ret = -EUCLEAN;
+ err = -EUCLEAN;
btrfs_crit(root->fs_info,
"regular/prealloc extent found for non-regular inode %llu",
btrfs_ino(inode));
From: Lukas Wunner <[email protected]>
commit 373afef350a93519b4b8d636b0895da8650b714b upstream.
davinci_spi_remove() accesses the driver's private data after it's been
freed with spi_master_put().
Fix by moving the spi_master_put() to the end of the function.
Fixes: fe5fd2540947 ("spi: davinci: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: Lukas Wunner <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Cc: <[email protected]> # v4.7+
Link: https://lore.kernel.org/r/412f7eb1cf8990e0a3a2153f4c577298deab623e.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-davinci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -1099,13 +1099,13 @@ static int davinci_spi_remove(struct pla
spi_bitbang_stop(&dspi->bitbang);
clk_disable_unprepare(dspi->clk);
- spi_master_put(master);
if (dspi->dma_rx) {
dma_release_channel(dspi->dma_rx);
dma_release_channel(dspi->dma_tx);
}
+ spi_master_put(master);
return 0;
}
From: Dave Kleikamp <[email protected]>
commit c61b3e4839007668360ed8b87d7da96d2e59fc6c upstream.
Bounds checking tools can flag a bug in dbAdjTree() for an array index
out of bounds in dmt_stree. Since dmt_stree can refer to the stree in
both structures dmaptree and dmapctl, use the larger array to eliminate
the false positive.
Signed-off-by: Dave Kleikamp <[email protected]>
Reported-by: butt3rflyh4ck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jfs/jfs_dmap.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/jfs/jfs_dmap.h
+++ b/fs/jfs/jfs_dmap.h
@@ -196,7 +196,7 @@ typedef union dmtree {
#define dmt_leafidx t1.leafidx
#define dmt_height t1.height
#define dmt_budmin t1.budmin
-#define dmt_stree t1.stree
+#define dmt_stree t2.stree
/*
* on-disk aggregate disk allocation map descriptor.
From: Nuno Sá <[email protected]>
commit 19ef7b70ca9487773c29b449adf0c70f540a0aab upstream.
When updating the buffer demux, we will skip a scan element from the
device in the case `in_ind != out_ind` and we enter the while loop.
in_ind should only be refreshed with `find_next_bit()` in the end of the
loop.
Note, to cause problems we need a situation where we are skippig over
an element (channel not enabled) that happens to not have the same size
as the next element. Whilst this is a possible situation we haven't
actually identified any cases in mainline where it happens as most drivers
have consistent channel storage sizes with the exception of the timestamp
which is the last element and hence never skipped over.
Fixes: 5ada4ea9be16 ("staging:iio: add demux optionally to path from device to buffer")
Signed-off-by: Nuno Sá <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/industrialio-buffer.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -1335,12 +1335,12 @@ static int iio_buffer_update_demux(struc
indio_dev->masklength,
in_ind + 1);
while (in_ind != out_ind) {
- in_ind = find_next_bit(indio_dev->active_scan_mask,
- indio_dev->masklength,
- in_ind + 1);
length = iio_storage_bytes_for_si(indio_dev, in_ind);
/* Make sure we are aligned */
in_loc = roundup(in_loc, length) + length;
+ in_ind = find_next_bit(indio_dev->active_scan_mask,
+ indio_dev->masklength,
+ in_ind + 1);
}
length = iio_storage_bytes_for_si(indio_dev, in_ind);
out_loc = roundup(out_loc, length);
From: Manivannan Sadhasivam <[email protected]>
[ Upstream commit 7948fab26bcc468aa2a76462f441291b5fb0d5c7 ]
The use of msleep() in the restart handler will cause scheduler to
induce a context switch which is not desirable. This generates below
warning on SDX55 when WDT is the only available restart source:
[ 39.800188] reboot: Restarting system
[ 39.804115] ------------[ cut here ]------------
[ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764
[ 39.812538] Modules linked in:
[ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47
[ 39.824854] Hardware name: Generic DT based system
[ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14)
[ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0)
[ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0)
[ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8)
[ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764)
[ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640)
[ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c)
[ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4)
[ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38)
[ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc)
[ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28)
[ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84)
[ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c)
[ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0)
[ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54)
[ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0)
[ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000
[ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000
[ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580
[ 39.980124] ---[ end trace 3f578288bad866e4 ]---
Hence, replace msleep() with mdelay() to fix this issue.
Fixes: 05e487d905ab ("watchdog: qcom: register a restart notifier")
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/qcom-wdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index 4f47b5e909566..8b88824a88dc2 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -121,7 +121,7 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
*/
wmb();
- msleep(150);
+ mdelay(150);
return 0;
}
--
2.27.0
From: Vincent Stehlé <[email protected]>
[ Upstream commit 7eb000bdbe7c7da811ef51942b356f6e819b13ba ]
The ndo_start_xmit() method must not attempt to free the skb to transmit
when returning NETDEV_TX_BUSY. Therefore, make sure the
korina_send_packet() function returns NETDEV_TX_OK when it frees a packet.
Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Vincent Stehlé <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/korina.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index cd8895838a04c..4cf1fc89df3c6 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -216,7 +216,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
dev_kfree_skb_any(skb);
spin_unlock_irqrestore(&lp->lock, flags);
- return NETDEV_TX_BUSY;
+ return NETDEV_TX_OK;
}
}
--
2.27.0
From: Jonathan Cameron <[email protected]>
commit 198cf32f0503d2ad60d320b95ef6fb8243db857f upstream.
Whilst this is another case of the issue Lars reported with
an array of elements of smaller than 8 bytes being passed
to iio_push_to_buffers_with_timestamp(), the solution here is
a bit different from the other cases and relies on __aligned
working on the stack (true since 4.6?)
This one is unusual. We have to do an explicit memset() each time
as we are reading 3 bytes into a potential 4 byte channel which
may sometimes be a 2 byte channel depending on what is enabled.
As such, moving the buffer to the heap in the iio_priv structure
doesn't save us much. We can't use a nice explicit structure
on the stack either as the data channels have different storage
sizes and are all separately controlled.
Fixes: cc26ad455f57 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver")
Reported-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Cc: Peter Meerwald <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/pressure/mpl3115.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/pressure/mpl3115.c
+++ b/drivers/iio/pressure/mpl3115.c
@@ -139,7 +139,14 @@ static irqreturn_t mpl3115_trigger_handl
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct mpl3115_data *data = iio_priv(indio_dev);
- u8 buffer[16]; /* 32-bit channel + 16-bit channel + padding + ts */
+ /*
+ * 32-bit channel + 16-bit channel + padding + ts
+ * Note that it is possible for only one of the first 2
+ * channels to be enabled. If that happens, the first element
+ * of the buffer may be either 16 or 32-bits. As such we cannot
+ * use a simple structure definition to express this data layout.
+ */
+ u8 buffer[16] __aligned(8);
int ret, pos = 0;
mutex_lock(&data->lock);
From: Johan Hovold <[email protected]>
commit 37faf50615412947868c49aee62f68233307f4e4 upstream.
The driver's deferred write wakeup was never flushed on disconnect,
something which could lead to the driver port data being freed while the
wakeup work is still scheduled.
Fix this by using the usb-serial write wakeup which gets cancelled
properly on disconnect.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected]
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -47,8 +47,7 @@
struct keyspan_pda_private {
int tx_room;
int tx_throttled;
- struct work_struct wakeup_work;
- struct work_struct unthrottle_work;
+ struct work_struct unthrottle_work;
struct usb_serial *serial;
struct usb_serial_port *port;
};
@@ -101,15 +100,6 @@ static const struct usb_device_id id_tab
};
#endif
-static void keyspan_pda_wakeup_write(struct work_struct *work)
-{
- struct keyspan_pda_private *priv =
- container_of(work, struct keyspan_pda_private, wakeup_work);
- struct usb_serial_port *port = priv->port;
-
- tty_port_tty_wakeup(&port->port);
-}
-
static void keyspan_pda_request_unthrottle(struct work_struct *work)
{
struct keyspan_pda_private *priv =
@@ -187,7 +177,7 @@ static void keyspan_pda_rx_interrupt(str
case 2: /* tx unthrottle interrupt */
priv->tx_throttled = 0;
/* queue up a wakeup at scheduler time */
- schedule_work(&priv->wakeup_work);
+ usb_serial_port_softint(port);
break;
default:
break;
@@ -567,7 +557,7 @@ static void keyspan_pda_write_bulk_callb
priv = usb_get_serial_port_data(port);
/* queue up a wakeup at scheduler time */
- schedule_work(&priv->wakeup_work);
+ usb_serial_port_softint(port);
}
@@ -733,7 +723,6 @@ static int keyspan_pda_port_probe(struct
if (!priv)
return -ENOMEM;
- INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
priv->serial = port->serial;
priv->port = port;
From: Christophe Leroy <[email protected]>
commit 7c6c86b36a36dd4a13d30bba07718e767aa2e7a1 upstream.
Since some time now, printk() adds carriage return, leading to
unusable xmon output if there is no udbg backend available:
[ 54.288722] sysrq: Entering xmon
[ 54.292209] Vector: 0 at [cace3d2c]
[ 54.292274] pc:
[ 54.292331] c0023650
[ 54.292468] : xmon+0x28/0x58
[ 54.292519]
[ 54.292574] lr:
[ 54.292630] c0023724
[ 54.292749] : sysrq_handle_xmon+0xa4/0xfc
[ 54.292801]
[ 54.292867] sp: cace3de8
[ 54.292931] msr: 9032
[ 54.292999] current = 0xc28d0000
[ 54.293072] pid = 377, comm = sh
[ 54.293157] Linux version 5.10.0-rc6-s3k-dev-01364-gedf13f0ccd76-dirty ([email protected]) (powerpc64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #4211 PREEMPT Fri Dec 4 09:32:11 UTC 2020
[ 54.293287] enter ? for help
[ 54.293470] [cace3de8]
[ 54.293532] c0023724
[ 54.293654] sysrq_handle_xmon+0xa4/0xfc
[ 54.293711] (unreliable)
...
[ 54.296002]
[ 54.296159] --- Exception: c01 (System Call) at
[ 54.296217] 0fd4e784
[ 54.296303]
[ 54.296375] SP (7fca6ff0) is in userspace
[ 54.296431] mon>
[ 54.296484] <no input ...>
Use pr_cont() instead.
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: [email protected] # v4.9+
Signed-off-by: Christophe Leroy <[email protected]>
[mpe: Mention that it only happens when udbg is not available]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/c8a6ec704416ecd5ff2bd26213c9bc026bdd19de.1607077340.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/xmon/nonstdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/xmon/nonstdio.c
+++ b/arch/powerpc/xmon/nonstdio.c
@@ -182,7 +182,7 @@ void xmon_printf(const char *format, ...
if (n && rc == 0) {
/* No udbg hooks, fallback to printk() - dangerous */
- printk("%s", xmon_outbuf);
+ pr_cont("%s", xmon_outbuf);
}
}
From: Filipe Manana <[email protected]>
commit 9f7fec0ba89108b9385f1b9fb167861224912a4a upstream
Some of the self tests create a test inode, setup some extents and then do
calls to btrfs_get_extent() to test that the corresponding extent maps
exist and are correct. However btrfs_get_extent(), since the 5.2 merge
window, now errors out when it finds a regular or prealloc extent for an
inode that does not correspond to a regular file (its ->i_mode is not
S_IFREG). This causes the self tests to fail sometimes, specially when
KASAN, slub_debug and page poisoning are enabled:
$ modprobe btrfs
modprobe: ERROR: could not insert 'btrfs': Invalid argument
$ dmesg
[ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on
[ 9414.692655] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 9414.692658] BTRFS: selftest: running btrfs free space cache tests
[ 9414.692918] BTRFS: selftest: running extent only tests
[ 9414.693061] BTRFS: selftest: running bitmap only tests
[ 9414.693366] BTRFS: selftest: running bitmap and extent tests
[ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests
[ 9414.697131] BTRFS: selftest: running extent buffer operation tests
[ 9414.697133] BTRFS: selftest: running btrfs_split_item tests
[ 9414.697564] BTRFS: selftest: running extent I/O tests
[ 9414.697583] BTRFS: selftest: running find delalloc tests
[ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test
[ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests
[ 9415.124192] BTRFS: selftest: running inode tests
[ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests
[ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test
[ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256
[ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0
This happens because the test inodes are created without ever initializing
the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs
callback btrfs_alloc_inode() initialize the i_mode. Initialization of the
i_mode is done through the various callbacks used by the VFS to create
new inodes (regular files, directories, symlinks, tmpfiles, etc), which
all call btrfs_new_inode() which in turn calls inode_init_owner(), which
sets the inode's i_mode. Since the tests only uses new_inode() to create
the test inodes, the i_mode was never initialized.
This always happens on a VM I used with kasan, slub_debug and many other
debug facilities enabled. It also happened to someone who reported this
on bugzilla (on a 5.3-rc).
Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode().
Fixes: 6bf9e4bd6a2778 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tests/btrfs-tests.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/fs/btrfs/tests/btrfs-tests.c
+++ b/fs/btrfs/tests/btrfs-tests.c
@@ -51,7 +51,13 @@ static struct file_system_type test_type
struct inode *btrfs_new_test_inode(void)
{
- return new_inode(test_mnt->mnt_sb);
+ struct inode *inode;
+
+ inode = new_inode(test_mnt->mnt_sb);
+ if (inode)
+ inode_init_owner(inode, NULL, S_IFREG);
+
+ return inode;
}
static int btrfs_init_test_fs(void)
From: Lukas Wunner <[email protected]>
commit e297ddf296de35037fa97f4302782def196d350a upstream.
If the call to spi_register_master() fails on probe of the NetUP
Universal DVB driver, the spi_master struct is erroneously not freed.
Likewise, if spi_new_device() fails, the spi_controller struct is
not unregistered. Plug the leaks.
While at it, fix an ordering issue in netup_spi_release() wherein
spi_unregister_master() is called after fiddling with the IRQ control
register. The correct order is to call spi_unregister_master() *before*
this teardown step because bus accesses may still be ongoing until that
function returns.
Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver")
Signed-off-by: Lukas Wunner <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Cc: <[email protected]> # v4.3+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <[email protected]> # v4.3+
Cc: Kozlov Sergey <[email protected]>
Link: https://lore.kernel.org/r/c4c24f333fc7840f4a3db24789e6e10dd660bede.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/pci/netup_unidvb/netup_unidvb_spi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_spi.c
@@ -184,7 +184,7 @@ int netup_spi_init(struct netup_unidvb_d
struct spi_master *master;
struct netup_spi *nspi;
- master = spi_alloc_master(&ndev->pci_dev->dev,
+ master = devm_spi_alloc_master(&ndev->pci_dev->dev,
sizeof(struct netup_spi));
if (!master) {
dev_err(&ndev->pci_dev->dev,
@@ -217,6 +217,7 @@ int netup_spi_init(struct netup_unidvb_d
ndev->pci_slot,
ndev->pci_func);
if (!spi_new_device(master, &netup_spi_board)) {
+ spi_unregister_master(master);
ndev->spi = NULL;
dev_err(&ndev->pci_dev->dev,
"%s(): unable to create SPI device\n", __func__);
@@ -235,13 +236,13 @@ void netup_spi_release(struct netup_unid
if (!spi)
return;
+ spi_unregister_master(spi->master);
spin_lock_irqsave(&spi->lock, flags);
reg = readw(&spi->regs->control_stat);
writew(reg | NETUP_SPI_CTRL_IRQ, &spi->regs->control_stat);
reg = readw(&spi->regs->control_stat);
writew(reg & ~NETUP_SPI_CTRL_IMASK, &spi->regs->control_stat);
spin_unlock_irqrestore(&spi->lock, flags);
- spi_unregister_master(spi->master);
ndev->spi = NULL;
}
From: Jing Xiangfeng <[email protected]>
[ Upstream commit db29d3d1c2451e673e29c7257471e3ce9d50383a ]
Fix to return a error code from the error handling case instead of 0.
Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Jing Xiangfeng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/host/r592.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index d5cfb503b9d69..2539984c1db1c 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -762,8 +762,10 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto error3;
dev->mmio = pci_ioremap_bar(pdev, 0);
- if (!dev->mmio)
+ if (!dev->mmio) {
+ error = -ENOMEM;
goto error4;
+ }
dev->irq = pdev->irq;
spin_lock_init(&dev->irq_lock);
@@ -790,12 +792,14 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
&dev->dummy_dma_page_physical_address, GFP_KERNEL);
r592_stop_dma(dev , 0);
- if (request_irq(dev->irq, &r592_irq, IRQF_SHARED,
- DRV_NAME, dev))
+ error = request_irq(dev->irq, &r592_irq, IRQF_SHARED,
+ DRV_NAME, dev);
+ if (error)
goto error6;
r592_update_card_detect(dev);
- if (memstick_add_host(host))
+ error = memstick_add_host(host);
+ if (error)
goto error7;
message("driver successfully loaded");
--
2.27.0
From: Simon Beginn <[email protected]>
[ Upstream commit cffdd6d90482316e18d686060a4397902ea04bd2 ]
The touchscreen on the Teclast x98 Pro is also mounted upside-down in
relation to the display orientation.
Signed-off-by: Simon Beginn <[email protected]>
Signed-off-by: Bastien Nocera <[email protected]>
Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/goodix.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 6a02e7301297d..ba0ab9963f3cd 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -98,6 +98,18 @@ static const struct dmi_system_id rotated_screen[] = {
DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
},
},
+ {
+ .ident = "Teclast X98 Pro",
+ .matches = {
+ /*
+ * Only match BIOS date, because the manufacturers
+ * BIOS does not report the board name at all
+ * (sometimes)...
+ */
+ DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+ DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+ },
+ },
{
.ident = "WinBook TW100",
.matches = {
--
2.27.0
From: Dmitry Torokhov <[email protected]>
[ Upstream commit 80db2a087f425b63f0163bc95217abd01c637cb5 ]
To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE
and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in
addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN
capability, so it is only matter of actually sending the events.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Rajat Jain <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/cros_ec_keyb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 25943e9bc8bff..328792e26a9f6 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -140,6 +140,7 @@ static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
"changed: [r%d c%d]: byte %02x\n",
row, col, new_state);
+ input_event(idev, EV_MSC, MSC_SCAN, pos);
input_report_key(idev, keycodes[pos],
new_state);
}
--
2.27.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit d2d94fc567624f96187e8b52083795620f93e69f ]
Some resource should be released in the error handling path of the probe
function, as already done in the remove function.
The remove function was fixed in commit bf416bd45738 ("clk: s2mps11: Add
missing of_node_put and of_clk_del_provider")
Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-s2mps11.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index f5d74e8db4327..1803af6230b27 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -211,6 +211,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
return ret;
err_reg:
+ of_node_put(s2mps11_clks[0].clk_np);
while (--i >= 0)
clkdev_drop(s2mps11_clks[i].lookup);
--
2.27.0
From: NeilBrown <[email protected]>
[ Upstream commit bf701b765eaa82dd164d65edc5747ec7288bb5c3 ]
nfsiod is currently a concurrency-managed workqueue (CMWQ).
This means that workitems scheduled to nfsiod on a given CPU are queued
behind all other work items queued on any CMWQ on the same CPU. This
can introduce unexpected latency.
Occaionally nfsiod can even cause excessive latency. If the work item
to complete a CLOSE request calls the final iput() on an inode, the
address_space of that inode will be dismantled. This takes time
proportional to the number of in-memory pages, which on a large host
working on large files (e.g.. 5TB), can be a large number of pages
resulting in a noticable number of seconds.
We can avoid these latency problems by switching nfsiod to WQ_UNBOUND.
This causes each concurrent work item to gets a dedicated thread which
can be scheduled to an idle CPU.
There is precedent for this as several other filesystems use WQ_UNBOUND
workqueue for handling various async events.
Signed-off-by: NeilBrown <[email protected]>
Fixes: ada609ee2ac2 ("workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 851274b25d394..6c0035761d170 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1995,7 +1995,7 @@ static int nfsiod_start(void)
{
struct workqueue_struct *wq;
dprintk("RPC: creating workqueue nfsiod\n");
- wq = alloc_workqueue("nfsiod", WQ_MEM_RECLAIM, 0);
+ wq = alloc_workqueue("nfsiod", WQ_MEM_RECLAIM | WQ_UNBOUND, 0);
if (wq == NULL)
return -ENOMEM;
nfsiod_workqueue = wq;
--
2.27.0
From: Qinglang Miao <[email protected]>
commit 560c6b914c6ec7d9d9a69fddbb5bf3bf71433e8b upstream.
Fix the missing clk_disable_unprepare() of info->pclk
before return from rockchip_saradc_resume in the error
handling case when fails to prepare and enable info->clk.
Suggested-by: Robin Murphy <[email protected]>
Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc")
Signed-off-by: Qinglang Miao <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/rockchip_saradc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -378,7 +378,7 @@ static int rockchip_saradc_resume(struct
ret = clk_prepare_enable(info->clk);
if (ret)
- return ret;
+ clk_disable_unprepare(info->pclk);
return ret;
}
From: Vincent Stehlé <[email protected]>
[ Upstream commit d0edaa28a1f7830997131cbce87b6c52472825d1 ]
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix the ps3stor_setup() function accordingly.
Fixes: 80071802cb9c ("[POWERPC] PS3: Storage Driver Core")
Signed-off-by: Vincent Stehlé <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ps3/ps3stor_lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index 8c3f5adf1bc65..2d76183756626 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -201,7 +201,7 @@ int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler)
dev->bounce_lpar = ps3_mm_phys_to_lpar(__pa(dev->bounce_buf));
dev->bounce_dma = dma_map_single(&dev->sbd.core, dev->bounce_buf,
dev->bounce_size, DMA_BIDIRECTIONAL);
- if (!dev->bounce_dma) {
+ if (dma_mapping_error(&dev->sbd.core, dev->bounce_dma)) {
dev_err(&dev->sbd.core, "%s:%u: map DMA region failed\n",
__func__, __LINE__);
error = -ENODEV;
--
2.27.0
From: Sara Sharon <[email protected]>
[ Upstream commit f495acd8851d7b345e5f0e521b2645b1e1f928a0 ]
In case we have old supplicant, the akm field is uninitialized.
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5bd89f536720d..ab8bca39afa3f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -10428,7 +10428,7 @@ static int nl80211_set_rekey_data(struct sk_buff *skb, struct genl_info *info)
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct nlattr *tb[NUM_NL80211_REKEY_DATA];
- struct cfg80211_gtk_rekey_data rekey_data;
+ struct cfg80211_gtk_rekey_data rekey_data = {};
int err;
if (!info->attrs[NL80211_ATTR_REKEY_DATA])
--
2.27.0
From: Johan Hovold <[email protected]>
commit 49fbb8e37a961396a5b6c82937c70df91de45e9d upstream.
The driver's transmit-unthrottle work was never flushed on disconnect,
something which could lead to the driver port data being freed while the
unthrottle work is still scheduled.
Fix this by cancelling the unthrottle work when shutting down the port.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected]
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -651,8 +651,12 @@ error:
}
static void keyspan_pda_close(struct usb_serial_port *port)
{
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+
usb_kill_urb(port->write_urb);
usb_kill_urb(port->interrupt_in_urb);
+
+ cancel_work_sync(&priv->unthrottle_work);
}
From: Dan Carpenter <[email protected]>
[ Upstream commit 8e4d86e241cf035d6d3467cd346e7ce490681937 ]
The "a->index" value comes from the user via the ioctl. The problem is
that the shift can wrap resulting in setting "mxb->cur_audinput" to an
invalid value, which later results in an array overflow.
Fixes: 6680427791c9 ("[media] mxb: fix audio handling")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7146/mxb.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
index 504d788076392..3e8753c9e1e47 100644
--- a/drivers/media/pci/saa7146/mxb.c
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -652,16 +652,17 @@ static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *
struct mxb *mxb = (struct mxb *)dev->ext_priv;
DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
- if (mxb_inputs[mxb->cur_input].audioset & (1 << a->index)) {
- if (mxb->cur_audinput != a->index) {
- mxb->cur_audinput = a->index;
- tea6420_route(mxb, a->index);
- if (mxb->cur_audinput == 0)
- mxb_update_audmode(mxb);
- }
- return 0;
+ if (a->index >= 32 ||
+ !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index)))
+ return -EINVAL;
+
+ if (mxb->cur_audinput != a->index) {
+ mxb->cur_audinput = a->index;
+ tea6420_route(mxb, a->index);
+ if (mxb->cur_audinput == 0)
+ mxb_update_audmode(mxb);
}
- return -EINVAL;
+ return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
--
2.27.0
From: Lukas Wunner <[email protected]>
commit c575e9113bff5e024d75481613faed5ef9d465b2 upstream.
If the calls to devm_request_irq() or devm_spi_register_master() fail
on probe of the PIC32 SPI driver, the DMA channels requested by
pic32_spi_dma_prep() are erroneously not released. Plug the leak.
Fixes: 1bcb9f8ceb67 ("spi: spi-pic32: Add PIC32 SPI master driver")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.7+
Cc: Purna Chandra Mandal <[email protected]>
Link: https://lore.kernel.org/r/9624250e3a7aa61274b38219a62375bac1def637.1604874488.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-pic32.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -839,6 +839,7 @@ static int pic32_spi_probe(struct platfo
return 0;
err_bailout:
+ pic32_spi_dma_unprep(pic32s);
clk_disable_unprepare(pic32s->clk);
err_master:
spi_master_put(master);
From: Luis Henriques <[email protected]>
commit e5cafce3ad0f8652d6849314d951459c2bff7233 upstream.
A NULL pointer dereference may occur in __ceph_remove_cap with some of the
callbacks used in ceph_iterate_session_caps, namely trim_caps_cb and
remove_session_caps_cb. Those callers hold the session->s_mutex, so they
are prevented from concurrent execution, but ceph_evict_inode does not.
Since the callers of this function hold the i_ceph_lock, the fix is simply
a matter of returning immediately if caps->ci is NULL.
Cc: [email protected]
URL: https://tracker.ceph.com/issues/43272
Suggested-by: Jeff Layton <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/caps.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -927,12 +927,19 @@ void __ceph_remove_cap(struct ceph_cap *
{
struct ceph_mds_session *session = cap->session;
struct ceph_inode_info *ci = cap->ci;
- struct ceph_mds_client *mdsc =
- ceph_sb_to_client(ci->vfs_inode.i_sb)->mdsc;
+ struct ceph_mds_client *mdsc;
int removed = 0;
+ /* 'ci' being NULL means the remove have already occurred */
+ if (!ci) {
+ dout("%s: cap inode is NULL\n", __func__);
+ return;
+ }
+
dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
+ mdsc = ceph_inode_to_client(&ci->vfs_inode)->mdsc;
+
/* remove from inode's cap rbtree, and clear auth cap */
rb_erase(&cap->ci_node, &ci->i_caps);
if (ci->i_auth_cap == cap)
From: Dan Carpenter <[email protected]>
[ Upstream commit 0d52848632a357948028eab67ff9b7cc0c12a0fb ]
Return -EINVAL if we can't find the correct device. Currently it
returns success.
Fixes: 13159183ec7a ("qlcnic: 83xx base driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index ebf5ead16939a..0928da21efd04 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2507,6 +2507,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
qlcnic_sriov_vf_register_map(ahw);
break;
default:
+ err = -EINVAL;
goto err_out_free_hw_res;
}
--
2.27.0
From: Lukas Wunner <[email protected]>
commit a4729c3506c3eb1a6ca5c0289f4e7cafa4115065 upstream.
If the calls to devm_clk_get(), devm_spi_register_master() or
clk_prepare_enable() fail on probe of the Mikrotik RB4xx SPI driver,
the spi_master struct is erroneously not freed.
Fix by switching over to the new devm_spi_alloc_master() helper.
Fixes: 05aec357871f ("spi: Add SPI driver for Mikrotik RB4xx series boards")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.2+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <[email protected]> # v4.2+
Cc: Bert Vermeulen <[email protected]>
Link: https://lore.kernel.org/r/369bf26d71927f60943b1d9d8f51810f00b0237d.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-rb4xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/spi/spi-rb4xx.c
+++ b/drivers/spi/spi-rb4xx.c
@@ -148,7 +148,7 @@ static int rb4xx_spi_probe(struct platfo
if (IS_ERR(spi_base))
return PTR_ERR(spi_base);
- master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*rbspi));
if (!master)
return -ENOMEM;
From: Alan Stern <[email protected]>
commit e469d0b09a19496e1972a20974bbf55b728151eb upstream.
The gspca driver leaks memory when a probe fails. gspca_dev_probe2()
calls v4l2_device_register(), which takes a reference to the
underlying device node (in this case, a USB interface). But the
failure pathway neglects to call v4l2_device_unregister(), the routine
responsible for dropping this reference. Consequently the memory for
the USB interface and its device never gets released.
This patch adds the missing function call.
Reported-and-tested-by: [email protected]
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/gspca.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -2145,6 +2145,7 @@ out:
input_unregister_device(gspca_dev->input_dev);
#endif
v4l2_ctrl_handler_free(gspca_dev->vdev.ctrl_handler);
+ v4l2_device_unregister(&gspca_dev->v4l2_dev);
kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
From: Nathan Lynch <[email protected]>
[ Upstream commit 52719fce3f4c7a8ac9eaa191e8d75a697f9fbcbc ]
There are three ways pseries_suspend_begin() can be reached:
1. When "mem" is written to /sys/power/state:
kobj_attr_store()
-> state_store()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
dev_attr_store()
-> store_hibernate()
-> pseries_suspend_begin()
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
dev_attr_store()
-> store_hibernate()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This is redundant because the VASI suspend state is already known to
be Suspending.
The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.
Fixes: 32d8ad4e621d ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/suspend.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index e76aefae2aa2b..0a0e0c8256f67 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -224,7 +224,6 @@ static struct bus_type suspend_subsys = {
static const struct platform_suspend_ops pseries_suspend_ops = {
.valid = suspend_valid_only_mem,
- .begin = pseries_suspend_begin,
.prepare_late = pseries_prepare_late,
.enter = pseries_suspend_enter,
};
--
2.27.0
From: Chuhong Yuan <[email protected]>
[ Upstream commit 1c1fb2653a0c2e3f310c07eacd8fc3a10e08c97a ]
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
Fixes: 11bd3dd1b7c2 ("ASoC: Add JZ4740 ASoC support")
Signed-off-by: Chuhong Yuan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/jz4740/jz4740-i2s.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 0dc1ab48fcebe..6440729facaf0 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -315,10 +315,14 @@ static int jz4740_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
switch (clk_id) {
case JZ4740_I2S_CLKSRC_EXT:
parent = clk_get(NULL, "ext");
+ if (IS_ERR(parent))
+ return PTR_ERR(parent);
clk_set_parent(i2s->clk_i2s, parent);
break;
case JZ4740_I2S_CLKSRC_PLL:
parent = clk_get(NULL, "pll half");
+ if (IS_ERR(parent))
+ return PTR_ERR(parent);
clk_set_parent(i2s->clk_i2s, parent);
ret = clk_set_rate(i2s->clk_i2s, freq);
break;
--
2.27.0
From: Cheng Lin <[email protected]>
[ Upstream commit 4a9d81caf841cd2c0ae36abec9c2963bf21d0284 ]
If the elem is deleted during be iterated on it, the iteration
process will fall into an endless loop.
kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137]
PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd"
[exception RIP: __state_in_grace+76]
RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246
RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50
RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580
RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40
R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40
R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000
CS: 0010 SS: 0018
#0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace]
#1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd]
#2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd]
#3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd]
#4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd]
#5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc]
#6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc]
#7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd]
#8 [ffff8818d3aefec8] kthread at ffffffff810b88c1
#9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607
The troublemake elem:
crash> lock_manager ffff881dc0c38298
struct lock_manager {
list = {
next = 0xffff881dc0c38298,
prev = 0xffff881dc0c38298
},
block_opens = false
}
Fixes: c87fb4a378f9 ("lockd: NLM grace period shouldn't block NFSv4 opens")
Signed-off-by: Cheng Lin <[email protected]>
Signed-off-by: Yi Wang <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs_common/grace.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/nfs_common/grace.c b/fs/nfs_common/grace.c
index 77d136ac89099..c21fca0dcba74 100644
--- a/fs/nfs_common/grace.c
+++ b/fs/nfs_common/grace.c
@@ -75,10 +75,14 @@ __state_in_grace(struct net *net, bool open)
if (!open)
return !list_empty(grace_list);
+ spin_lock(&grace_lock);
list_for_each_entry(lm, grace_list, list) {
- if (lm->block_opens)
+ if (lm->block_opens) {
+ spin_unlock(&grace_lock);
return true;
+ }
}
+ spin_unlock(&grace_lock);
return false;
}
--
2.27.0
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 78ff2733ff352175eb7f4418a34654346e1b6cd2 ]
Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.
Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.
Fixes: 1ecc798c6764 ("x86: debugctlmsr kprobes")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/kprobes/core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 86aec286e4f22..3da08881a0104 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -1018,6 +1018,11 @@ int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
* So clear it by resetting the current kprobe:
*/
regs->flags &= ~X86_EFLAGS_TF;
+ /*
+ * Since the single step (trap) has been cancelled,
+ * we need to restore BTF here.
+ */
+ restore_btf();
/*
* If the TF flag was set before the kprobe hit,
--
2.27.0
From: Hui Wang <[email protected]>
commit b08221c40febcbda9309dd70c61cf1b0ebb0e351 upstream.
Recently we met a touchscreen problem on some Thinkpad machines, the
touchscreen driver (i2c-hid) is not loaded and the touchscreen can't
work.
An i2c ACPI device with the name WACF2200 is defined in the BIOS, with
the current rule in matching_id(), this device will be regarded as
a PNP device since there is WACFXXX in the acpi_pnp_device_ids[] and
this PNP device is attached to the acpi device as the 1st
physical_node, this will make the i2c bus match fail when i2c bus
calls acpi_companion_match() to match the acpi_id_table in the i2c-hid
driver.
WACF2200 is an i2c device instead of a PNP device, after adding the
string length comparing, the matching_id() will return false when
matching WACF2200 and WACFXXX, and it is reasonable to compare the
string length when matching two IDs.
Suggested-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Cc: All applicable <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpi_pnp.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -320,6 +320,9 @@ static bool matching_id(const char *idst
{
int i;
+ if (strlen(idstr) != strlen(list_id))
+ return false;
+
if (memcmp(idstr, list_id, 3))
return false;
From: Zhang Qilong <[email protected]>
[ Upstream commit 97031ccffa4f62728602bfea8439dd045cd3aeb2 ]
The driver did not return an error in the case where
pm8001_configure_phy_settings() failed.
Use rc to store the return value of pm8001_configure_phy_settings().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.")
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Zhang Qilong <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_init.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 9fc675f57e336..f54115d74f519 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1061,7 +1061,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
pm8001_init_sas_add(pm8001_ha);
/* phy setting support for motherboard controller */
- if (pm8001_configure_phy_settings(pm8001_ha))
+ rc = pm8001_configure_phy_settings(pm8001_ha);
+ if (rc)
goto err_out_shost;
pm8001_post_sas_ha_init(shost, chip);
--
2.27.0
From: Daniel Scally <[email protected]>
commit 12fc4dad94dfac25599f31257aac181c691ca96f upstream.
This reverts commit 8a66790b7850a6669129af078768a1d42076a0ef.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically converting it to AE_OK), referring to that
value as "an OK termination by the user function". This means that
acpi_dev_get_resources() does not abort processing when the preproc
function returns a negative value.
Signed-off-by: Daniel Scally <[email protected]>
Cc: 3.10+ <[email protected]> # 3.10+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -532,7 +532,7 @@ static acpi_status acpi_dev_process_reso
ret = c->preproc(ares, c->preproc_data);
if (ret < 0) {
c->error = ret;
- return AE_CTRL_TERMINATE;
+ return AE_ABORT_METHOD;
} else if (ret > 0) {
return AE_OK;
}
From: Pali Rohár <[email protected]>
[ Upstream commit c0382d049d2def37b81e907a8b22661a4a4a6eb5 ]
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 8def31034d033 ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/scpi-cpufreq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index ea7a4e1b68c26..1a45fbb00d877 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -111,6 +111,7 @@ static struct platform_driver scpi_cpufreq_platdrv = {
};
module_platform_driver(scpi_cpufreq_platdrv);
+MODULE_ALIAS("platform:scpi-cpufreq");
MODULE_AUTHOR("Sudeep Holla <[email protected]>");
MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
MODULE_LICENSE("GPL v2");
--
2.27.0
From: Pali Rohár <[email protected]>
[ Upstream commit 9433777a6e0aae27468d3434b75cd51bb88ff711 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: 6754f556103be ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/highbank-cpufreq.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
index 1608f7105c9f8..ad743f2f31e78 100644
--- a/drivers/cpufreq/highbank-cpufreq.c
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -104,6 +104,13 @@ out_put_node:
}
module_init(hb_cpufreq_driver_init);
+static const struct of_device_id __maybe_unused hb_cpufreq_of_match[] = {
+ { .compatible = "calxeda,highbank" },
+ { .compatible = "calxeda,ecx-2000" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hb_cpufreq_of_match);
+
MODULE_AUTHOR("Mark Langsdorf <[email protected]>");
MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
MODULE_LICENSE("GPL");
--
2.27.0
From: Arnd Bergmann <[email protected]>
commit f051ae4f6c732c231046945b36234e977f8467c6 upstream.
gcc -Warray-bounds warns about a serious bug in
cyapa_pip_retrieve_data_structure:
drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop':
include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds]
40 | *((__le16 *)p) = cpu_to_le16(val);
drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd'
569 | } __packed cmd;
| ^~~
Apparently the '-2' was added to the pointer instead of the value,
writing garbage into the stack next to this variable.
Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/cyapa_gen6.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/mouse/cyapa_gen6.c
+++ b/drivers/input/mouse/cyapa_gen6.c
@@ -573,7 +573,7 @@ static int cyapa_pip_retrieve_data_struc
memset(&cmd, 0, sizeof(cmd));
put_unaligned_le16(PIP_OUTPUT_REPORT_ADDR, &cmd.head.addr);
- put_unaligned_le16(sizeof(cmd), &cmd.head.length - 2);
+ put_unaligned_le16(sizeof(cmd) - 2, &cmd.head.length);
cmd.head.report_id = PIP_APP_CMD_REPORT_ID;
cmd.head.cmd_code = PIP_RETRIEVE_DATA_STRUCTURE;
put_unaligned_le16(read_offset, &cmd.read_offset);
From: Vincent Bernat <[email protected]>
[ Upstream commit c0c5a60f0f1311bcf08bbe735122096d6326fb5b ]
Introduced in 0eeb075fad73, the "ignore_routes_with_linkdown" sysctl
ignores a route whose interface is down. It is provided as a
per-interface sysctl. However, while a "all" variant is exposed, it
was a noop since it was never evaluated. We use the usual "or" logic
for this kind of sysctls.
Tested with:
ip link add type veth # veth0 + veth1
ip link add type veth # veth1 + veth2
ip link set up dev veth0
ip link set up dev veth1 # link-status paired with veth0
ip link set up dev veth2
ip link set up dev veth3 # link-status paired with veth2
# First available path
ip -4 addr add 203.0.113.${uts#H}/24 dev veth0
ip -6 addr add 2001:db8:1::${uts#H}/64 dev veth0
# Second available path
ip -4 addr add 192.0.2.${uts#H}/24 dev veth2
ip -6 addr add 2001:db8:2::${uts#H}/64 dev veth2
# More specific route through first path
ip -4 route add 198.51.100.0/25 via 203.0.113.254 # via veth0
ip -6 route add 2001:db8:3::/56 via 2001:db8:1::ff # via veth0
# Less specific route through second path
ip -4 route add 198.51.100.0/24 via 192.0.2.254 # via veth2
ip -6 route add 2001:db8:3::/48 via 2001:db8:2::ff # via veth2
# H1: enable on "all"
# H2: enable on "veth0"
for v in ipv4 ipv6; do
case $uts in
H1)
sysctl -qw net.${v}.conf.all.ignore_routes_with_linkdown=1
;;
H2)
sysctl -qw net.${v}.conf.veth0.ignore_routes_with_linkdown=1
;;
esac
done
set -xe
# When veth0 is up, best route is through veth0
ip -o route get 198.51.100.1 | grep -Fw veth0
ip -o route get 2001:db8:3::1 | grep -Fw veth0
# When veth0 is down, best route should be through veth2 on H1/H2,
# but on veth0 on H2
ip link set down dev veth1 # down veth0
ip route show
[ $uts != H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth0
[ $uts != H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth0
[ $uts = H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth2
[ $uts = H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth2
Without this patch, the two last lines would fail on H1 (the one using
the "all" sysctl). With the patch, everything succeeds as expected.
Also document the sysctl in `ip-sysctl.rst`.
Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down")
Signed-off-by: Vincent Bernat <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/networking/ip-sysctl.txt | 3 +++
include/linux/inetdevice.h | 2 +-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index a374412610ba3..1526fc785a084 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1237,6 +1237,9 @@ igmpv3_unsolicited_report_interval - INTEGER
IGMPv3 report retransmit will take place.
Default: 1000 (1 seconds)
+ignore_routes_with_linkdown - BOOLEAN
+ Ignore routes whose link is down when performing a FIB lookup.
+
promote_secondaries - BOOLEAN
When a primary IP address is removed from this interface
promote a corresponding secondary IP address instead of
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index ee971f335a8b6..0e6cd645f67f3 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -121,7 +121,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
IN_DEV_ORCONF((in_dev), ACCEPT_REDIRECTS)))
#define IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN(in_dev) \
- IN_DEV_CONF_GET((in_dev), IGNORE_ROUTES_WITH_LINKDOWN)
+ IN_DEV_ORCONF((in_dev), IGNORE_ROUTES_WITH_LINKDOWN)
#define IN_DEV_ARPFILTER(in_dev) IN_DEV_ORCONF((in_dev), ARPFILTER)
#define IN_DEV_ARP_ACCEPT(in_dev) IN_DEV_ORCONF((in_dev), ARP_ACCEPT)
--
2.27.0
From: Lukas Wunner <[email protected]>
commit 5ef76dac0f2c26aeae4ee79eb830280f16d5aceb upstream.
If the calls to devm_platform_ioremap_resource(), irq_of_parse_and_map()
or devm_request_irq() fail on probe of the ST SSC4 SPI driver, the
runtime PM disable depth is incremented even though it was not
decremented before. Fix it.
Fixes: cd050abeba2a ("spi: st-ssc4: add missed pm_runtime_disable")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v5.5+
Cc: Chuhong Yuan <[email protected]>
Link: https://lore.kernel.org/r/fbe8768c30dc829e2d77eabe7be062ca22f84024.1604874488.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-st-ssc4.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -379,13 +379,14 @@ static int spi_st_probe(struct platform_
ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
dev_err(&pdev->dev, "Failed to register master\n");
- goto clk_disable;
+ goto rpm_disable;
}
return 0;
-clk_disable:
+rpm_disable:
pm_runtime_disable(&pdev->dev);
+clk_disable:
clk_disable_unprepare(spi_st->clk);
put_master:
spi_master_put(master);
From: Christophe JAILLET <[email protected]>
[ Upstream commit 4375ada01963d1ebf733d60d1bb6e5db401e1ac6 ]
If the 'register_netdev()' call fails, we must undo a previous
'bcmgenet_mii_init()' call.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 5d4189c94718c..2921ae13db283 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3433,8 +3433,10 @@ static int bcmgenet_probe(struct platform_device *pdev)
clk_disable_unprepare(priv->clk);
err = register_netdev(dev);
- if (err)
+ if (err) {
+ bcmgenet_mii_exit(dev);
goto err;
+ }
return err;
--
2.27.0
From: Calum Mackay <[email protected]>
[ Upstream commit 9b82d88d5976e5f2b8015d58913654856576ace5 ]
NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.
This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.
It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().
When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:
xs_tcp_setup_socket: connect returned unhandled error -107
Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.
The existing callers of nlm_bind_host & nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.
For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.
To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.
Drop the dprintk, which adds no value over a trace.
Signed-off-by: Calum Mackay <[email protected]>
Fixes: 35f5a422ce1a ("SUNRPC: new interface to force an RPC rebind")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/lockd/host.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index c7eb47f2fb6c3..603fa652b965d 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -430,12 +430,7 @@ nlm_bind_host(struct nlm_host *host)
* RPC rebind is required
*/
if ((clnt = host->h_rpcclnt) != NULL) {
- if (time_after_eq(jiffies, host->h_nextrebind)) {
- rpc_force_rebind(clnt);
- host->h_nextrebind = jiffies + NLM_HOST_REBIND;
- dprintk("lockd: next rebind in %lu jiffies\n",
- host->h_nextrebind - jiffies);
- }
+ nlm_rebind_host(host);
} else {
unsigned long increment = nlmsvc_timeout;
struct rpc_timeout timeparms = {
@@ -483,13 +478,20 @@ nlm_bind_host(struct nlm_host *host)
return clnt;
}
-/*
- * Force a portmap lookup of the remote lockd port
+/**
+ * nlm_rebind_host - If needed, force a portmap lookup of the peer's lockd port
+ * @host: NLM host handle for peer
+ *
+ * This is not needed when using a connection-oriented protocol, such as TCP.
+ * The existing autobind mechanism is sufficient to force a rebind when
+ * required, e.g. on connection state transitions.
*/
void
nlm_rebind_host(struct nlm_host *host)
{
- dprintk("lockd: rebind host %s\n", host->h_name);
+ if (host->h_proto != IPPROTO_UDP)
+ return;
+
if (host->h_rpcclnt && time_after_eq(jiffies, host->h_nextrebind)) {
rpc_force_rebind(host->h_rpcclnt);
host->h_nextrebind = jiffies + NLM_HOST_REBIND;
--
2.27.0
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 05ad917561fca39a03338cb21fe9622f998b0f9c ]
Currently, the client will always ask for security_labels if the server
returns that it supports that feature regardless of any LSM modules
(such as Selinux) enforcing security policy. This adds performance
penalty to the READDIR operation.
Client adjusts superblock's support of the security_label based on
the server's support but also current client's configuration of the
LSM modules. Thus, prior to using the default bitmask in READDIR,
this patch checks the server's capabilities and then instructs
READDIR to remove FATTR4_WORD2_SECURITY_LABEL from the bitmask.
v5: fixing silly mistakes of the rushed v4
v4: simplifying logic
v3: changing label's initialization per Ondrej's comment
v2: dropping selinux hook and using the sb cap.
Suggested-by: Ondrej Mosnacek <[email protected]>
Suggested-by: Scott Mayhew <[email protected]>
Signed-off-by: Olga Kornievskaia <[email protected]>
Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 4e2f18c26535d..2abdb2070c879 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -4334,12 +4334,12 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
u64 cookie, struct page **pages, unsigned int count, int plus)
{
struct inode *dir = d_inode(dentry);
+ struct nfs_server *server = NFS_SERVER(dir);
struct nfs4_readdir_arg args = {
.fh = NFS_FH(dir),
.pages = pages,
.pgbase = 0,
.count = count,
- .bitmask = NFS_SERVER(d_inode(dentry))->attr_bitmask,
.plus = plus,
};
struct nfs4_readdir_res res;
@@ -4354,9 +4354,15 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
dprintk("%s: dentry = %pd2, cookie = %Lu\n", __func__,
dentry,
(unsigned long long)cookie);
+ if (!(server->caps & NFS_CAP_SECURITY_LABEL))
+ args.bitmask = server->attr_bitmask_nl;
+ else
+ args.bitmask = server->attr_bitmask;
+
nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
res.pgbase = args.pgbase;
- status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
+ status = nfs4_call_sync(server->client, server, &msg, &args.seq_args,
+ &res.seq_res, 0);
if (status >= 0) {
memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
status += args.pgbase;
--
2.27.0
From: Thomas Gleixner <[email protected]>
commit 862ee699fefe1e6d6f2c1518395f0b999b8beb15 upstream.
The console part of sisusbvga is broken vs. printk(). It uses in_atomic()
to detect contexts in which it cannot sleep despite the big fat comment in
preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which
means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to
the driver and this only can be solved once the core printk infrastructure
supports sleepable console drivers.
Make it depend on BROKEN for now.
Fixes: 1bbb4f2035d9 ("[PATCH] USB: sisusb[vga] update")
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Thomas Winischhofer <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -15,7 +15,7 @@ config USB_SISUSBVGA
config USB_SISUSBVGA_CON
bool "Text console and mode switching support" if USB_SISUSBVGA
- depends on VT
+ depends on VT && BROKEN
select FONT_8x16
---help---
Say Y here if you want a VGA text console via the USB dongle or
From: Zhang Qilong <[email protected]>
[ Upstream commit 3482e797ab688da6703fe18d8bad52f94199f4f2 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in tegra_sflash_resume, so we should fix it.
Fixes: 8528547bcc336 ("spi: tegra: add spi driver for sflash controller")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra20-sflash.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index b6558bb6f9dfc..4b9541e1726a5 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -564,6 +564,7 @@ static int tegra_sflash_resume(struct device *dev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
+ pm_runtime_put_noidle(dev);
dev_err(dev, "pm runtime failed, e = %d\n", ret);
return ret;
}
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit 763eab7074f6e71babd85d796156f05a675f9510 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_slink_setup and
tegra_slink_resume), so we should fix it.
Fixes: dc4dc36056392 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra20-slink.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index cf2a329fd8958..9f14560686b68 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -761,6 +761,7 @@ static int tegra_slink_setup(struct spi_device *spi)
ret = pm_runtime_get_sync(tspi->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(tspi->dev);
dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);
return ret;
}
@@ -1197,6 +1198,7 @@ static int tegra_slink_resume(struct device *dev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
+ pm_runtime_put_noidle(dev);
dev_err(dev, "pm runtime failed, e = %d\n", ret);
return ret;
}
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit ec8684847d8062496c4619bc3fcff31c19d56847 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in knav_queue_probe, so we should fix it.
Fixes: 41f93af900a20 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Zhang Qilong <[email protected]>
Signed-off-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/knav_qmss_queue.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index b73e3534f67b2..fec97882ac880 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1717,6 +1717,7 @@ static int knav_queue_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
dev_err(dev, "Failed to enable QMSS\n");
return ret;
}
--
2.27.0
From: Keita Suzuki <[email protected]>
[ Upstream commit abf287eeff4c6da6aa804bbd429dfd9d0dfb6ea7 ]
When dvb_create_media_graph fails, the debugfs kept inside client should
be released. However, the current implementation does not release them.
Fix this by adding a new goto label to call smsdvb_debugfs_release.
Fixes: 0d3ab8410dcb ("[media] dvb core: must check dvb_create_media_graph()")
Signed-off-by: Keita Suzuki <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/siano/smsdvb-main.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index 9148e14c9d077..9d5eb8b6aede9 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -1180,12 +1180,15 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
rc = dvb_create_media_graph(&client->adapter, true);
if (rc < 0) {
pr_err("dvb_create_media_graph failed %d\n", rc);
- goto client_error;
+ goto media_graph_error;
}
pr_info("DVB interface registered.\n");
return 0;
+media_graph_error:
+ smsdvb_debugfs_release(client);
+
client_error:
dvb_unregister_frontend(&client->frontend);
--
2.27.0
From: Qinglang Miao <[email protected]>
[ Upstream commit dcdff74fa6bc00c32079d0bebd620764c26f2d89 ]
Fix to goto snd_error in error handling case when fails
to do snd_ctl_add, as done elsewhere in this function.
Fixes: 28cae868cd24 ("[media] solo6x10: move out of staging into drivers/media/pci.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/solo6x10/solo6x10-g723.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-g723.c b/drivers/media/pci/solo6x10/solo6x10-g723.c
index 6a35107aca255..0fe69e71331db 100644
--- a/drivers/media/pci/solo6x10/solo6x10-g723.c
+++ b/drivers/media/pci/solo6x10/solo6x10-g723.c
@@ -385,7 +385,7 @@ int solo_g723_init(struct solo_dev *solo_dev)
ret = snd_ctl_add(card, snd_ctl_new1(&kctl, solo_dev));
if (ret < 0)
- return ret;
+ goto snd_error;
ret = solo_snd_pcm_init(solo_dev);
if (ret < 0)
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit b4fa73358c306d747a2200aec6f7acb97e5750e6 ]
The patch fix two reference leak.
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to call put operation will result in
reference leak.
2) The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced.
We fix it by: 1) adding call pm_runtime_put_noidle or
pm_runtime_put_sync in error handling. 2) adding pm_runtime_disable
in error handling, to keep usage counter and disable depth balanced.
Fixes: 88139ed030583 ("soc: ti: add Keystone Navigator DMA support")
Signed-off-by: Zhang Qilong <[email protected]>
Signed-off-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/knav_dma.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index 1a7b5caa127b5..b86bea4537325 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -752,8 +752,9 @@ static int knav_dma_probe(struct platform_device *pdev)
pm_runtime_enable(kdev->dev);
ret = pm_runtime_get_sync(kdev->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(kdev->dev);
dev_err(kdev->dev, "unable to enable pktdma, err %d\n", ret);
- return ret;
+ goto err_pm_disable;
}
/* Initialise all packet dmas */
@@ -767,13 +768,21 @@ static int knav_dma_probe(struct platform_device *pdev)
if (list_empty(&kdev->list)) {
dev_err(dev, "no valid dma instance\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_put_sync;
}
debugfs_create_file("knav_dma", S_IFREG | S_IRUGO, NULL, NULL,
&knav_dma_debug_ops);
return ret;
+
+err_put_sync:
+ pm_runtime_put_sync(kdev->dev);
+err_pm_disable:
+ pm_runtime_disable(kdev->dev);
+
+ return ret;
}
static int knav_dma_remove(struct platform_device *pdev)
--
2.27.0
From: Kamal Heib <[email protected]>
[ Upstream commit 6d8285e604e0221b67bd5db736921b7ddce37d00 ]
Before create CQ, make sure that the requested number of CQEs is in the
supported range.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/cq.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index a856371bbe58c..501f496f4e1a1 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -893,6 +893,9 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev,
rhp = to_c4iw_dev(ibdev);
+ if (entries < 1 || entries > ibdev->attrs.max_cqe)
+ return -EINVAL;
+
if (vector >= rhp->rdev.lldi.nciq)
return ERR_PTR(-EINVAL);
--
2.27.0
From: Zhihao Cheng <[email protected]>
[ Upstream commit 4cba398f37f868f515ff12868418dc28574853a1 ]
Fix to return the error code from of_get_child_by_name() instaed of 0
in knav_queue_probe().
Fixes: 41f93af900a20d1a0a ("soc: ti: add Keystone Navigator QMSS driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Santosh Shilimkar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/knav_qmss_queue.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index fec97882ac880..5248649b0b41e 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1785,9 +1785,10 @@ static int knav_queue_probe(struct platform_device *pdev)
if (ret)
goto err;
- regions = of_get_child_by_name(node, "descriptor-regions");
+ regions = of_get_child_by_name(node, "descriptor-regions");
if (!regions) {
dev_err(dev, "descriptor-regions not specified\n");
+ ret = -ENODEV;
goto err;
}
ret = knav_queue_setup_regions(kdev, regions);
--
2.27.0
From: Cezary Rojewski <[email protected]>
[ Upstream commit 4c22b80f61540ea99d9b4af0127315338755f05b ]
soc-pcm's dpcm_fe_dai_do_trigger() supported DRAIN commnad up to kernel
v5.4 where explicit switch(cmd) has been introduced which takes into
account all SNDRV_PCM_TRIGGER_xxx but SNDRV_PCM_TRIGGER_DRAIN. Update
switch statement to reactive support for it.
As DRAIN is somewhat unique by lacking negative/stop counterpart, bring
behaviour of dpcm_fe_dai_do_trigger() for said command back to its
pre-v5.4 state by adding it to START/RESUME/PAUSE_RELEASE group.
Fixes: acbf27746ecf ("ASoC: pcm: update FE/BE trigger order based on the command")
Signed-off-by: Cezary Rojewski <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-pcm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index b67d105b76e46..6c31a909845cd 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2186,6 +2186,7 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_DRAIN:
ret = dpcm_dai_trigger_fe_be(substream, cmd, true);
break;
case SNDRV_PCM_TRIGGER_STOP:
@@ -2203,6 +2204,7 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_DRAIN:
ret = dpcm_dai_trigger_fe_be(substream, cmd, false);
break;
case SNDRV_PCM_TRIGGER_STOP:
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit d6ff32478d7e95d6ca199b5c852710d6964d5811 ]
The pm_runtime_enable will decrement the power disable depth. Imbalance
depth will resulted in enabling runtime PM of device fails later. Thus
a pairing decrement must be needed on the error handling path to keep it
balanced.
Fixes: 6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs")
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ehci-omap.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 94ea9fff13e6d..9227a9ddac609 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -237,6 +237,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
err_pm_runtime:
pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
err_phy:
for (i = 0; i < omap->nports; i++) {
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit ff8107200367f4abe0e5bce66a245e8d0f2d229e ]
The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.
Fixes: f7b2b5dd6a62a ("crypto: omap-aes - add error check for pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/omap-aes.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index fe32dd95ae4ff..a2d5ba0a0d5a0 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -1172,7 +1172,7 @@ static int omap_aes_probe(struct platform_device *pdev)
if (err < 0) {
dev_err(dev, "%s: failed to get_sync(%d)\n",
__func__, err);
- goto err_res;
+ goto err_pm_disable;
}
omap_aes_dma_stop(dd);
@@ -1257,6 +1257,7 @@ err_engine:
omap_aes_dma_cleanup(dd);
err_irq:
tasklet_kill(&dd->done_task);
+err_pm_disable:
pm_runtime_disable(dev);
err_res:
dd = NULL;
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit 4d1be581ec6b92a338bb7ed23e1381f45ddf336f ]
If softing_netdev_open() fails, we should call close_candev() to avoid
reference leak.
Fixes: 03fd3cf5a179d ("can: add driver for Softing card")
Signed-off-by: Zhang Qilong <[email protected]>
Acked-by: Kurt Van Dijck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/softing/softing_main.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 7621f91a8a209..fd48770ba7920 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -393,8 +393,13 @@ static int softing_netdev_open(struct net_device *ndev)
/* check or determine and set bittime */
ret = open_candev(ndev);
- if (!ret)
- ret = softing_startstop(ndev, 1);
+ if (ret)
+ return ret;
+
+ ret = softing_startstop(ndev, 1);
+ if (ret < 0)
+ close_candev(ndev);
+
return ret;
}
--
2.27.0
From: Alexander Sverdlin <[email protected]>
commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream.
It has been observed that once per 300-1300 port openings the first
transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared
as "e" on the wire). It only happened if single byte has been transmitted
right after port open, which means, DMA is not used for this transfer and
the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says
"when accessing the MDR1 registers that causes a dummy under-run condition
that will freeze the UART in IrDA transmission. In UART mode, this may
corrupt the transferred data". Strictly speaking,
omap_8250_mdr1_errataset() performs a read access and if the value is the
same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing
omap-serial driver showed it has no read access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Cc: [email protected]
Signed-off-by: Alexander Sverdlin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_omap.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -161,11 +161,6 @@ static void omap_8250_mdr1_errataset(str
struct omap8250_priv *priv)
{
u8 timeout = 255;
- u8 old_mdr1;
-
- old_mdr1 = serial_in(up, UART_OMAP_MDR1);
- if (old_mdr1 == priv->mdr1)
- return;
serial_out(up, UART_OMAP_MDR1, priv->mdr1);
udelay(2);
From: Thomas Gleixner <[email protected]>
[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.
Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-table.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 2d3ff028f50c9..62e3dc19b6099 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1250,12 +1250,6 @@ void dm_table_event_callback(struct dm_table *t,
void dm_table_event(struct dm_table *t)
{
- /*
- * You can no longer call dm_table_event() from interrupt
- * context, use a bottom half instead.
- */
- BUG_ON(in_interrupt());
-
mutex_lock(&_event_lock);
if (t->event_fn)
t->event_fn(t->event_context);
--
2.27.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 723ae803218da993143387bf966042eccefac077 ]
Return -ENOMEM when allocating refill memory failed.
Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index 6a0b25e0823fa..6b64a1e07c017 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -747,6 +747,7 @@ static int omap_dmm_probe(struct platform_device *dev)
&omap_dmm->refill_pa, GFP_KERNEL);
if (!omap_dmm->refill_va) {
dev_err(&dev->dev, "could not allocate refill memory\n");
+ ret = -ENOMEM;
goto fail;
}
--
2.27.0
From: Oleksij Rempel <[email protected]>
[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ]
In some rare cases the 32 bit Rt value will overflow if z2 and x is max,
z1 is minimal value and x_plate_ohms is relatively high (for example 800
ohm). This would happen on some screen age with low pressure.
There are two possible fixes:
- make Rt 64bit
- reorder calculation to avoid overflow
The second variant seems to be preferable, since 64 bit calculation on
32 bit system is a bit more expensive.
Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver")
Co-developed-by: David Jander <[email protected]>
Signed-off-by: David Jander <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/ads7846.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1ce3ecbe37f89..9fa7ae12df80a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -785,10 +785,11 @@ static void ads7846_report_state(struct ads7846 *ts)
/* compute touch pressure resistance using equation #2 */
Rt = z2;
Rt -= z1;
- Rt *= x;
Rt *= ts->x_plate_ohms;
+ Rt = DIV_ROUND_CLOSEST(Rt, 16);
+ Rt *= x;
Rt /= z1;
- Rt = (Rt + 2047) >> 12;
+ Rt = DIV_ROUND_CLOSEST(Rt, 256);
} else {
Rt = 0;
}
--
2.27.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit fbb7dc5db6dee553b5a07c27e86364a5223e244c ]
gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:
drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;
Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.
Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.
Fixes: 2a4443a69934 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mthca/mthca_cq.c | 2 +-
drivers/infiniband/hw/mthca/mthca_dev.h | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index a5694dec3f2ee..098653b8157ed 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -609,7 +609,7 @@ static inline int mthca_poll_one(struct mthca_dev *dev,
entry->byte_len = MTHCA_ATOMIC_BYTE_LEN;
break;
default:
- entry->opcode = MTHCA_OPCODE_INVALID;
+ entry->opcode = 0xFF;
break;
}
} else {
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 4393a022867ba..e1fc67e73bf87 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -105,7 +105,6 @@ enum {
MTHCA_OPCODE_ATOMIC_CS = 0x11,
MTHCA_OPCODE_ATOMIC_FA = 0x12,
MTHCA_OPCODE_BIND_MW = 0x18,
- MTHCA_OPCODE_INVALID = 0xff
};
enum {
--
2.27.0
From: Zhang Qilong <[email protected]>
[ Upstream commit ee5558a9084584015c8754ffd029ce14a5827fa8 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in img_spfi_resume, so we should fix it.
Fixes: deba25800a12b ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-img-spfi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 2e65b70c78792..2a340234c85c1 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -771,8 +771,10 @@ static int img_spfi_resume(struct device *dev)
int ret;
ret = pm_runtime_get_sync(dev);
- if (ret)
+ if (ret) {
+ pm_runtime_put_noidle(dev);
return ret;
+ }
spfi_reset(spfi);
pm_runtime_put(dev);
--
2.27.0
From: Takashi Iwai <[email protected]>
commit 43d5ca88dfcd35e43010fdd818e067aa9a55f5ba upstream.
syzbot spotted a potential out-of-bounds shift in the USB-audio format
parser that receives the arbitrary shift value from the USB
descriptor.
Add a range check for avoiding the undefined behavior.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/format.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -52,6 +52,8 @@ static u64 parse_audio_format_i_type(str
case UAC_VERSION_1:
default: {
struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
+ if (format >= 64)
+ return 0; /* invalid format */
sample_width = fmt->bBitResolution;
sample_bytes = fmt->bSubframeSize;
format = 1 << format;
From: Zhang Qilong <[email protected]>
[ Upstream commit 3952659a6108f77a0d062d8e8487bdbdaf52a66c ]
gb_pm_runtime_get_sync has increased the usage counter of the device here.
Forgetting to call gb_pm_runtime_put_noidle will result in usage counter
leak in the error branch of (gbcodec_hw_params and gbcodec_prepare). We
fixed it by adding it.
Fixes: c388ae7696992 ("greybus: audio: Update pm runtime support in dai_ops callback")
Signed-off-by: Zhang Qilong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/greybus/audio_codec.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/greybus/audio_codec.c b/drivers/staging/greybus/audio_codec.c
index 8a0744b58a329..4c2d6c2d4fb41 100644
--- a/drivers/staging/greybus/audio_codec.c
+++ b/drivers/staging/greybus/audio_codec.c
@@ -491,6 +491,7 @@ static int gbcodec_hw_params(struct snd_pcm_substream *substream,
if (ret) {
dev_err_ratelimited(dai->dev, "%d: Error during set_config\n",
ret);
+ gb_pm_runtime_put_noidle(bundle);
mutex_unlock(&codec->lock);
return ret;
}
@@ -562,6 +563,7 @@ static int gbcodec_prepare(struct snd_pcm_substream *substream,
break;
}
if (ret) {
+ gb_pm_runtime_put_noidle(bundle);
mutex_unlock(&codec->lock);
dev_err_ratelimited(dai->dev, "set_data_size failed:%d\n",
ret);
--
2.27.0
From: Necip Fazil Yildiran <[email protected]>
[ Upstream commit 3a5fe2fb9635c43359c9729352f45044f3c8df6b ]
When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
Selected by [y]:
- BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Fixes: c1d1c5d4213e ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm47xx/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index e970fd9cf7693..7ca7384fd5c9d 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -26,6 +26,7 @@ config BCM47XX_BCMA
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
+ select BCMA_DRIVER_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
default y
--
2.27.0
From: Andy Shevchenko <[email protected]>
[ Upstream commit 0b74e40a4e41f3cbad76dff4c50850d47b525b26 ]
Baytrail pin control has a common register to set up debounce timeout.
When a pin configuration requested debounce to be disabled, the rest
of the pins may still want to have debounce enabled and thus rely on
the common timeout value. Avoid clearing debounce value when turning
it off for one pin while others may still use it.
Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
Depends-on: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support")
Depends-on: 827e1579e1d5 ("pinctrl: baytrail: Rectify debounce support (part 2)")
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index fc51922839f82..73d3c4122eb89 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1266,7 +1266,6 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
break;
case PIN_CONFIG_INPUT_DEBOUNCE:
debounce = readl(db_reg);
- debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
if (arg)
conf |= BYT_DEBOUNCE_EN;
@@ -1275,24 +1274,31 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
switch (arg) {
case 375:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_375US;
break;
case 750:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_750US;
break;
case 1500:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_1500US;
break;
case 3000:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_3MS;
break;
case 6000:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_6MS;
break;
case 12000:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_12MS;
break;
case 24000:
+ debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
debounce |= BYT_DEBOUNCE_PULSE_24MS;
break;
default:
--
2.27.0
From: Will McVicker <[email protected]>
commit 457a902ba1a73b7720666b21ca038cd19764db18 upstream.
Needed for SuperSpeed Plus support for f_midi. This allows the
gadget to work properly without crashing at SuperSpeed rates.
Cc: Felipe Balbi <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Will McVicker <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_midi.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -1008,6 +1008,12 @@ static int f_midi_bind(struct usb_config
f->hs_descriptors = usb_copy_descriptors(midi_function);
if (!f->hs_descriptors)
goto fail_f_midi;
+
+ if (gadget_is_superspeed_plus(c->cdev->gadget)) {
+ f->ssp_descriptors = usb_copy_descriptors(midi_function);
+ if (!f->ssp_descriptors)
+ goto fail_f_midi;
+ }
}
kfree(midi_function);
From: Markus Reichl <[email protected]>
[ Upstream commit 0011c6d182774fc781fb9e115ebe8baa356029ae ]
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Markus Reichl <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7afbfb0f96a3c..dd211dbdaaae0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -65,6 +65,9 @@
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
--
2.27.0
From: Vineet Gupta <[email protected]>
[ Upstream commit e42404fa10fd11fe72d0a0e149a321d10e577715 ]
To start stack unwinding (SP, PC and BLINK) are needed. When the
explicit execution context (pt_regs etc) is not available, unwinder
assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK
from kernel mode stack.
But this assumption is not true, specially in a SMP system, when top
runs on 1 core, there may be active running processes on all cores.
So when unwinding non courrent tasks, ensure they are NOT running.
And while at it, handle the self unwinding case explicitly.
This came out of investigation of a customer reported hang with
rcutorture+top
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/kernel/stacktrace.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 165158735aa6b..3ee19b1e79be5 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -39,15 +39,15 @@
#ifdef CONFIG_ARC_DW2_UNWIND
-static void seed_unwind_frame_info(struct task_struct *tsk,
- struct pt_regs *regs,
- struct unwind_frame_info *frame_info)
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+ struct unwind_frame_info *frame_info)
{
/*
* synchronous unwinding (e.g. dump_stack)
* - uses current values of SP and friends
*/
- if (tsk == NULL && regs == NULL) {
+ if (regs == NULL && (tsk == NULL || tsk == current)) {
unsigned long fp, sp, blink, ret;
frame_info->task = current;
@@ -66,11 +66,15 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->call_frame = 0;
} else if (regs == NULL) {
/*
- * Asynchronous unwinding of sleeping task
- * - Gets SP etc from task's pt_regs (saved bottom of kernel
- * mode stack of task)
+ * Asynchronous unwinding of a likely sleeping task
+ * - first ensure it is actually sleeping
+ * - if so, it will be in __switch_to, kernel mode SP of task
+ * is safe-kept and BLINK at a well known location in there
*/
+ if (tsk->state == TASK_RUNNING)
+ return -1;
+
frame_info->task = tsk;
frame_info->regs.r27 = TSK_K_FP(tsk);
@@ -104,6 +108,8 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
frame_info->regs.r63 = regs->ret;
frame_info->call_frame = 0;
}
+
+ return 0;
}
#endif
@@ -117,7 +123,8 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
unsigned int address;
struct unwind_frame_info frame_info;
- seed_unwind_frame_info(tsk, regs, &frame_info);
+ if (seed_unwind_frame_info(tsk, regs, &frame_info))
+ return 0;
while (1) {
address = UNW_PC(&frame_info);
--
2.27.0
From: Dae R. Jeong <[email protected]>
commit c731b84b51bf7fe83448bea8f56a6d55006b0615 upstream.
Syzkaller reports a warning as belows.
WARNING: CPU: 0 PID: 9647 at drivers/md/md.c:7169
...
Call Trace:
...
RIP: 0010:md_ioctl+0x4017/0x5980 drivers/md/md.c:7169
RSP: 0018:ffff888096027950 EFLAGS: 00010293
RAX: ffff88809322c380 RBX: 0000000000000932 RCX: ffffffff84e266f2
RDX: 0000000000000000 RSI: ffffffff84e299f7 RDI: 0000000000000007
RBP: ffff888096027bc0 R08: ffff88809322c380 R09: ffffed101341a482
R10: ffff888096027940 R11: ffff88809a0d240f R12: 0000000000000932
R13: ffff8880a2c14100 R14: ffff88809a0d2268 R15: ffff88809a0d2408
__blkdev_driver_ioctl block/ioctl.c:304 [inline]
blkdev_ioctl+0xece/0x1c10 block/ioctl.c:606
block_ioctl+0xee/0x130 fs/block_dev.c:1930
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is caused by a race between two concurrenct md_ioctl()s closing
the array.
CPU1 (md_ioctl()) CPU2 (md_ioctl())
------ ------
set_bit(MD_CLOSING, &mddev->flags);
did_set_md_closing = true;
WARN_ON_ONCE(test_bit(MD_CLOSING,
&mddev->flags));
if(did_set_md_closing)
clear_bit(MD_CLOSING, &mddev->flags);
Fix the warning by returning immediately if the MD_CLOSING bit is set
in &mddev->flags which indicates that the array is being closed.
Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Dae R. Jeong <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6857,8 +6857,11 @@ static int md_ioctl(struct block_device
err = -EBUSY;
goto out;
}
- WARN_ON_ONCE(test_bit(MD_CLOSING, &mddev->flags));
- set_bit(MD_CLOSING, &mddev->flags);
+ if (test_and_set_bit(MD_CLOSING, &mddev->flags)) {
+ mutex_unlock(&mddev->open_mutex);
+ err = -EBUSY;
+ goto out;
+ }
did_set_md_closing = true;
mutex_unlock(&mddev->open_mutex);
sync_blockdev(bdev);
From: Leon Romanovsky <[email protected]>
[ Upstream commit 340b940ea0ed12d9adbb8f72dea17d516b2019e8 ]
If cm_create_timewait_info() fails, the timewait_info pointer will contain
an error value and will be used in cm_remove_remote() later.
general protection fault, probably for non-canonical address 0xdffffc0000000024: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0×0000000000000120-0×0000000000000127]
CPU: 2 PID: 12446 Comm: syz-executor.3 Not tainted 5.10.0-rc5-5d4c0742a60e #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:cm_remove_remote.isra.0+0x24/0×170 drivers/infiniband/core/cm.c:978
Code: 84 00 00 00 00 00 41 54 55 53 48 89 fb 48 8d ab 2d 01 00 00 e8 7d bf 4b fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <0f> b6 04 02 48 89 ea 83 e2 07 38 d0 7f 08 84 c0 0f 85 fc 00 00 00
RSP: 0018:ffff888013127918 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: ffffc9000a18b000
RDX: 0000000000000024 RSI: ffffffff82edc573 RDI: fffffffffffffff4
RBP: 0000000000000121 R08: 0000000000000001 R09: ffffed1002624f1d
R10: 0000000000000003 R11: ffffed1002624f1c R12: ffff888107760c70
R13: ffff888107760c40 R14: fffffffffffffff4 R15: ffff888107760c9c
FS: 00007fe1ffcc1700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2ff21000 CR3: 000000010f504001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
cm_destroy_id+0x189/0×15b0 drivers/infiniband/core/cm.c:1155
cma_connect_ib drivers/infiniband/core/cma.c:4029 [inline]
rdma_connect_locked+0x1100/0×17c0 drivers/infiniband/core/cma.c:4107
rdma_connect+0x2a/0×40 drivers/infiniband/core/cma.c:4140
ucma_connect+0x277/0×340 drivers/infiniband/core/ucma.c:1069
ucma_write+0x236/0×2f0 drivers/infiniband/core/ucma.c:1724
vfs_write+0x220/0×830 fs/read_write.c:603
ksys_write+0x1df/0×240 fs/read_write.c:658
do_syscall_64+0x33/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Maor Gottlieb <[email protected]>
Reported-by: Amit Matityahu <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 304429fd04ddb..97168b856606b 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1252,6 +1252,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id,
id.local_id);
if (IS_ERR(cm_id_priv->timewait_info)) {
ret = PTR_ERR(cm_id_priv->timewait_info);
+ cm_id_priv->timewait_info = NULL;
goto out;
}
@@ -1683,6 +1684,7 @@ static int cm_req_handler(struct cm_work *work)
id.local_id);
if (IS_ERR(cm_id_priv->timewait_info)) {
ret = PTR_ERR(cm_id_priv->timewait_info);
+ cm_id_priv->timewait_info = NULL;
goto destroy;
}
cm_id_priv->timewait_info->work.remote_id = req_msg->local_comm_id;
--
2.27.0
From: Nicholas Piggin <[email protected]>
[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ]
powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.
Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cpu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index a542b5e583503..e005209f279e1 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -815,6 +815,10 @@ void __unregister_cpu_notifier(struct notifier_block *nb)
EXPORT_SYMBOL(__unregister_cpu_notifier);
#ifdef CONFIG_HOTPLUG_CPU
+#ifndef arch_clear_mm_cpumask_cpu
+#define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
+#endif
+
/**
* clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
* @cpu: a CPU id
@@ -850,7 +854,7 @@ void clear_tasks_mm_cpumask(int cpu)
t = find_lock_task_mm(p);
if (!t)
continue;
- cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
+ arch_clear_mm_cpumask_cpu(cpu, t->mm);
task_unlock(t);
}
rcu_read_unlock();
--
2.27.0
From: Timo Witte <[email protected]>
[ Upstream commit 9e7a005ad56aa7d6ea5830c5ffcc60bf35de380b ]
Got a dmesg message on my AMD Renoir based Acer laptop:
"acer_wmi: Unknown key number - 0x84" when toggling keyboard
background light
Signed-off-by: Timo Witte <[email protected]>
Reviewed-by: "Lee, Chun-Yi" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 1515c9480f89f..90015e2cce9bf 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -124,6 +124,7 @@ static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */
{KE_IGNORE, 0x81, {KEY_SLEEP} },
{KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad Toggle */
+ {KE_IGNORE, 0x84, {KEY_KBDILLUMTOGGLE} }, /* Automatic Keyboard background light toggle */
{KE_KEY, KEY_TOUCHPAD_ON, {KEY_TOUCHPAD_ON} },
{KE_KEY, KEY_TOUCHPAD_OFF, {KEY_TOUCHPAD_OFF} },
{KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
--
2.27.0
From: Peilin Ye <[email protected]>
commit f7e0e8b2f1b0a09b527885babda3e912ba820798 upstream.
`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.
Cc: [email protected]
Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events")
Reported-and-tested-by: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/hci_event.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5141,20 +5141,18 @@ static void hci_le_direct_adv_report_evt
struct sk_buff *skb)
{
u8 num_reports = skb->data[0];
- void *ptr = &skb->data[1];
+ struct hci_ev_le_direct_adv_info *ev = (void *)&skb->data[1];
- hci_dev_lock(hdev);
+ if (!num_reports || skb->len < num_reports * sizeof(*ev) + 1)
+ return;
- while (num_reports--) {
- struct hci_ev_le_direct_adv_info *ev = ptr;
+ hci_dev_lock(hdev);
+ for (; num_reports; num_reports--, ev++)
process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
ev->bdaddr_type, &ev->direct_addr,
ev->direct_addr_type, ev->rssi, NULL, 0);
- ptr += sizeof(*ev);
- }
-
hci_dev_unlock(hdev);
}
From: Oliver Neukum <[email protected]>
commit 08a02f954b0def3ada8ed6d4b2c7bcb67e885e9c upstream.
I got reports that some models of this old scanner need
this when using runtime PM.
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -189,6 +189,9 @@ static const struct usb_device_id usb_qu
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Agfa SNAPSCAN 1212U */
+ { USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
From: Tom Rix <[email protected]>
[ Upstream commit 4e19d51ca5b28a1d435a844c7b2a8e1b1b6fa237 ]
clang static analysis reports this problem:
cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
kfree(gma_connector);
^~~~~~~~~~~~~~~~~~~~
In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.
Fixes: d112a8163f83 ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index 7ec4e3fbafd8c..ec6ea202cf5de 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -2126,7 +2126,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
DRM_INFO("failed to retrieve link info, disabling eDP\n");
cdv_intel_dp_encoder_destroy(encoder);
cdv_intel_dp_destroy(connector);
- goto err_priv;
+ goto err_connector;
} else {
DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n",
intel_dp->dpcd[0], intel_dp->dpcd[1],
--
2.27.0
From: Coiby Xu <[email protected]>
commit 47a0001436352c9853d72bf2071e85b316d688a2 upstream.
Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().
Together with commit 06abe8291bc31839950f7d0362d9979edc88a666
("pinctrl: amd: fix incorrect way to disable debounce filter") and
Andy's patch "gpiolib: acpi: Take into account debounce settings" [1],
this will fix broken touchpads for laptops whose BIOS set the
debounce timeout to a relatively large value. For example, the BIOS
of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000),
Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce
timeout to 124.8ms. This led to the kernel receiving only ~7 HID
reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28).
Existing touchpads like [2][3] are not troubled by this bug because
the debounce timeout has been set to 0 by the BIOS before enabling
the debounce filter in setting IRQ type.
[1] https://lore.kernel.org/linux-gpio/[email protected]/
8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
[2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28
Signed-off-by: Coiby Xu <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Benjamin Tissoires <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinctrl-amd.c | 7 -------
1 file changed, 7 deletions(-)
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -404,7 +404,6 @@ static int amd_gpio_irq_set_type(struct
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -412,7 +411,6 @@ static int amd_gpio_irq_set_type(struct
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -420,7 +418,6 @@ static int amd_gpio_irq_set_type(struct
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
- pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_edge_irq);
break;
@@ -428,8 +425,6 @@ static int amd_gpio_irq_set_type(struct
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
- pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
- pin_reg |= DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_level_irq);
break;
@@ -437,8 +432,6 @@ static int amd_gpio_irq_set_type(struct
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
- pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
- pin_reg |= DB_TYPE_PRESERVE_HIGH_GLITCH << DB_CNTRL_OFF;
irq_set_handler_locked(d, handle_level_irq);
break;
From: Eric Dumazet <[email protected]>
[ Upstream commit 905b2032fa424f253d9126271439cc1db2b01130 ]
If tbl_mpp can not be allocated, we call mesh_table_free(tbl_path)
while tbl_path rhashtable has not yet been initialized, which causes
panics.
Simply factorize the rhashtable_init() call into mesh_table_alloc()
WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __flush_work kernel/workqueue.c:3040 [inline]
WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Modules linked in:
CPU: 1 PID: 8474 Comm: syz-executor663 Not tainted 5.10.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__flush_work kernel/workqueue.c:3040 [inline]
RIP: 0010:__cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136
Code: 5d c3 e8 bf ae 29 00 0f 0b e9 f0 fd ff ff e8 b3 ae 29 00 0f 0b 43 80 3c 3e 00 0f 85 31 ff ff ff e9 34 ff ff ff e8 9c ae 29 00 <0f> 0b e9 dc fe ff ff 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 7d fd ff
RSP: 0018:ffffc9000165f5a0 EFLAGS: 00010293
RAX: ffffffff814b7064 RBX: 0000000000000001 RCX: ffff888021c80000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888024039ca0 R08: dffffc0000000000 R09: fffffbfff1dd3e64
R10: fffffbfff1dd3e64 R11: 0000000000000000 R12: 1ffff920002cbebd
R13: ffff888024039c88 R14: 1ffff11004807391 R15: dffffc0000000000
FS: 0000000001347880(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000140 CR3: 000000002cc0a000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rhashtable_free_and_destroy+0x25/0x9c0 lib/rhashtable.c:1137
mesh_table_free net/mac80211/mesh_pathtbl.c:69 [inline]
mesh_pathtbl_init+0x287/0x2e0 net/mac80211/mesh_pathtbl.c:785
ieee80211_mesh_init_sdata+0x2ee/0x530 net/mac80211/mesh.c:1591
ieee80211_setup_sdata+0x733/0xc40 net/mac80211/iface.c:1569
ieee80211_if_add+0xd5c/0x1cd0 net/mac80211/iface.c:1987
ieee80211_add_iface+0x59/0x130 net/mac80211/cfg.c:125
rdev_add_virtual_intf net/wireless/rdev-ops.h:45 [inline]
nl80211_new_interface+0x563/0xb40 net/wireless/nl80211.c:3855
genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0xe4e/0x1280 net/netlink/genetlink.c:800
netlink_rcv_skb+0x190/0x3a0 net/netlink/af_netlink.c:2494
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x780/0x930 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x9a8/0xd40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0x519/0x800 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x2b1/0x360 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/mesh_pathtbl.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -61,6 +61,7 @@ static struct mesh_table *mesh_table_all
INIT_HLIST_HEAD(&newtbl->known_gates);
atomic_set(&newtbl->entries, 0);
spin_lock_init(&newtbl->gates_lock);
+ rhashtable_init(&newtbl->rhead, &mesh_rht_params);
return newtbl;
}
@@ -849,9 +850,6 @@ int mesh_pathtbl_init(struct ieee80211_s
goto free_path;
}
- rhashtable_init(&tbl_path->rhead, &mesh_rht_params);
- rhashtable_init(&tbl_mpp->rhead, &mesh_rht_params);
-
sdata->u.mesh.mesh_paths = tbl_path;
sdata->u.mesh.mpp_paths = tbl_mpp;
From: Johannes Berg <[email protected]>
[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]
When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of
time.
To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable
time.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intel/iwlwifi/pcie/trans.c | 36 ++++++++++++++-----
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index e7b873018dca6..e1287c3421165 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1904,18 +1904,36 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
void *buf, int dwords)
{
unsigned long flags;
- int offs, ret = 0;
+ int offs = 0;
u32 *vals = buf;
- if (iwl_trans_grab_nic_access(trans, &flags)) {
- iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr);
- for (offs = 0; offs < dwords; offs++)
- vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
- iwl_trans_release_nic_access(trans, &flags);
- } else {
- ret = -EBUSY;
+ while (offs < dwords) {
+ /* limit the time we spin here under lock to 1/2s */
+ ktime_t timeout = ktime_add_us(ktime_get(), 500 * USEC_PER_MSEC);
+
+ if (iwl_trans_grab_nic_access(trans, &flags)) {
+ iwl_write32(trans, HBUS_TARG_MEM_RADDR,
+ addr + 4 * offs);
+
+ while (offs < dwords) {
+ vals[offs] = iwl_read32(trans,
+ HBUS_TARG_MEM_RDAT);
+ offs++;
+
+ /* calling ktime_get is expensive so
+ * do it once in 128 reads
+ */
+ if (offs % 128 == 0 && ktime_after(ktime_get(),
+ timeout))
+ break;
+ }
+ iwl_trans_release_nic_access(trans, &flags);
+ } else {
+ return -EBUSY;
+ }
}
- return ret;
+
+ return 0;
}
static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr,
--
2.27.0
From: Dmitry Torokhov <[email protected]>
commit 82e06090473289ce63e23fdeb8737aad59b10645 upstream.
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
Reported-and-tested-by: [email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/cm109.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -571,12 +571,15 @@ static int cm109_input_open(struct input
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->ctl_data->byte[HID_OR3] = 0x00;
+ dev->ctl_urb_pending = 1;
error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
- if (error)
+ if (error) {
+ dev->ctl_urb_pending = 0;
dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
- else
+ } else {
dev->open = 1;
+ }
mutex_unlock(&dev->pm_mutex);
From: Randy Dunlap <[email protected]>
[ Upstream commit 2d586494c4a001312650f0b919d534e429dd1e09 ]
The SCSI_BNX2_ISCSI kconfig symbol selects CNIC and CNIC selects UIO, which
depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to SCSI_BNX2_ISCSI.
Quietens this kconfig warning:
WARNING: unmet direct dependencies detected for CNIC
Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) && MMU [=n]
Selected by [m]:
- SCSI_BNX2_ISCSI [=m] && SCSI_LOWLEVEL [=y] && SCSI [=y] && NET [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)
Link: https://lore.kernel.org/r/[email protected]
Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.")
Cc: [email protected]
Cc: Nilesh Javali <[email protected]>
Cc: Manish Rangankar <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bnx2i/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index ba30ff86d5818..b27a3738d940c 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -3,6 +3,7 @@ config SCSI_BNX2_ISCSI
depends on NET
depends on PCI
depends on (IPV6 || IPV6=n)
+ depends on MMU
select SCSI_ISCSI_ATTRS
select NETDEVICES
select ETHERNET
--
2.27.0
From: Moshe Shemesh <[email protected]>
[ Upstream commit fed91613c9dd455dd154b22fa8e11b8526466082 ]
Add restarting state flag to avoid scheduling another restart task while
such task is already running. Change task name from watchdog_task to
restart_task to better fit the task role.
Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task")
Signed-off-by: Moshe Shemesh <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 20 +++++++++++++-------
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 7 ++++++-
2 files changed, 19 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1311,8 +1311,10 @@ static void mlx4_en_tx_timeout(struct ne
}
priv->port_stats.tx_timeout++;
- en_dbg(DRV, priv, "Scheduling watchdog\n");
- queue_work(mdev->workqueue, &priv->watchdog_task);
+ if (!test_and_set_bit(MLX4_EN_STATE_FLAG_RESTARTING, &priv->state)) {
+ en_dbg(DRV, priv, "Scheduling port restart\n");
+ queue_work(mdev->workqueue, &priv->restart_task);
+ }
}
@@ -1746,6 +1748,7 @@ int mlx4_en_start_port(struct net_device
local_bh_enable();
}
+ clear_bit(MLX4_EN_STATE_FLAG_RESTARTING, &priv->state);
netif_tx_start_all_queues(dev);
netif_device_attach(dev);
@@ -1900,7 +1903,7 @@ void mlx4_en_stop_port(struct net_device
static void mlx4_en_restart(struct work_struct *work)
{
struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
- watchdog_task);
+ restart_task);
struct mlx4_en_dev *mdev = priv->mdev;
struct net_device *dev = priv->dev;
@@ -2220,7 +2223,7 @@ static int mlx4_en_change_mtu(struct net
if (netif_running(dev)) {
mutex_lock(&mdev->state_lock);
if (!mdev->device_up) {
- /* NIC is probably restarting - let watchdog task reset
+ /* NIC is probably restarting - let restart task reset
* the port */
en_dbg(DRV, priv, "Change MTU called with card down!?\n");
} else {
@@ -2229,7 +2232,9 @@ static int mlx4_en_change_mtu(struct net
if (err) {
en_err(priv, "Failed restarting port:%d\n",
priv->port);
- queue_work(mdev->workqueue, &priv->watchdog_task);
+ if (!test_and_set_bit(MLX4_EN_STATE_FLAG_RESTARTING,
+ &priv->state))
+ queue_work(mdev->workqueue, &priv->restart_task);
}
}
mutex_unlock(&mdev->state_lock);
@@ -2701,7 +2706,8 @@ static int mlx4_xdp_set(struct net_devic
if (err) {
en_err(priv, "Failed starting port %d for XDP change\n",
priv->port);
- queue_work(mdev->workqueue, &priv->watchdog_task);
+ if (!test_and_set_bit(MLX4_EN_STATE_FLAG_RESTARTING, &priv->state))
+ queue_work(mdev->workqueue, &priv->restart_task);
}
}
@@ -3080,7 +3086,7 @@ int mlx4_en_init_netdev(struct mlx4_en_d
priv->counter_index = MLX4_SINK_COUNTER_INDEX(mdev->dev);
spin_lock_init(&priv->stats_lock);
INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
- INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
+ INIT_WORK(&priv->restart_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -522,6 +522,10 @@ struct mlx4_en_stats_bitmap {
struct mutex mutex; /* for mutual access to stats bitmap */
};
+enum {
+ MLX4_EN_STATE_FLAG_RESTARTING,
+};
+
struct mlx4_en_priv {
struct mlx4_en_dev *mdev;
struct mlx4_en_port_profile *prof;
@@ -586,7 +590,7 @@ struct mlx4_en_priv {
struct mlx4_en_cq *rx_cq[MAX_RX_RINGS];
struct mlx4_qp drop_qp;
struct work_struct rx_mode_task;
- struct work_struct watchdog_task;
+ struct work_struct restart_task;
struct work_struct linkstate_task;
struct delayed_work stats_task;
struct delayed_work service_task;
@@ -632,6 +636,7 @@ struct mlx4_en_priv {
u32 pflags;
u8 rss_key[MLX4_EN_RSS_KEY_SIZE];
u8 rss_hash_fn;
+ unsigned long state;
};
enum mlx4_en_wol {
From: Nathan Chancellor <[email protected]>
[ Upstream commit d853b3406903a7dc5b14eb5bada3e8cd677f66a2 ]
Clang warns:
drivers/spi/spi-bcm2835aux.c:532:50: warning: variable 'err' is
uninitialized when used here [-Wuninitialized]
dev_err(&pdev->dev, "could not get clk: %d\n", err);
^~~
./include/linux/dev_printk.h:112:32: note: expanded from macro 'dev_err'
_dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
drivers/spi/spi-bcm2835aux.c:495:9: note: initialize the variable 'err'
to silence this warning
int err;
^
= 0
1 warning generated.
Restore the assignment so that the error value can be used in the
dev_err statement and there is no uninitialized memory being leaked.
Fixes: e13ee6cc4781 ("spi: bcm2835aux: Fix use-after-free on unbind")
Link: https://github.com/ClangBuiltLinux/linux/issues/1199
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
[lukas: backport to 4.19-stable, add stable designation]
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.4+: e13ee6cc4781: spi: bcm2835aux: Fix use-after-free on unbind
Cc: <[email protected]> # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835aux.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -444,8 +444,9 @@ static int bcm2835aux_spi_probe(struct p
bs->clk = devm_clk_get(&pdev->dev, NULL);
if ((!bs->clk) || (IS_ERR(bs->clk))) {
+ err = PTR_ERR(bs->clk);
dev_err(&pdev->dev, "could not get clk: %d\n", err);
- return PTR_ERR(bs->clk);
+ return err;
}
bs->irq = platform_get_irq(pdev, 0);
From: Fugang Duan <[email protected]>
[ Upstream commit 5f58591323bf3f342920179f24515935c4b5fd60 ]
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1901,9 +1901,6 @@ static int stmmac_release(struct net_dev
{
struct stmmac_priv *priv = netdev_priv(dev);
- if (priv->eee_enabled)
- del_timer_sync(&priv->eee_ctrl_timer);
-
/* Stop and disconnect the PHY */
if (priv->phydev) {
phy_stop(priv->phydev);
@@ -1924,6 +1921,11 @@ static int stmmac_release(struct net_dev
if (priv->lpi_irq > 0)
free_irq(priv->lpi_irq, dev);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
priv->hw->dma->stop_rx(priv->ioaddr);
@@ -3503,6 +3505,11 @@ int stmmac_suspend(struct device *dev)
napi_disable(&priv->napi);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA */
priv->hw->dma->stop_tx(priv->ioaddr);
priv->hw->dma->stop_rx(priv->ioaddr);
From: Lukas Wunner <[email protected]>
[ Upstream commit e13ee6cc4781edaf8c7321bee19217e3702ed481 ]
bcm2835aux_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: b9dd3f6d4172 ("spi: bcm2835aux: Fix controller unregister order")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: <[email protected]> # v4.4+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <[email protected]> # v4.4+: b9dd3f6d4172: spi: bcm2835aux: Fix controller unregister order
Cc: <[email protected]> # v4.4+
Link: https://lore.kernel.org/r/b290b06357d0c0bdee9cecc539b840a90630f101.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835aux.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -407,7 +407,7 @@ static int bcm2835aux_spi_probe(struct p
unsigned long clk_hz;
int err;
- master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*bs));
if (!master) {
dev_err(&pdev->dev, "spi_alloc_master() failed\n");
return -ENOMEM;
@@ -439,30 +439,26 @@ static int bcm2835aux_spi_probe(struct p
/* the main area */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bs->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(bs->regs)) {
- err = PTR_ERR(bs->regs);
- goto out_master_put;
- }
+ if (IS_ERR(bs->regs))
+ return PTR_ERR(bs->regs);
bs->clk = devm_clk_get(&pdev->dev, NULL);
if ((!bs->clk) || (IS_ERR(bs->clk))) {
- err = PTR_ERR(bs->clk);
dev_err(&pdev->dev, "could not get clk: %d\n", err);
- goto out_master_put;
+ return PTR_ERR(bs->clk);
}
bs->irq = platform_get_irq(pdev, 0);
if (bs->irq <= 0) {
dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
- err = bs->irq ? bs->irq : -ENODEV;
- goto out_master_put;
+ return bs->irq ? bs->irq : -ENODEV;
}
/* this also enables the HW block */
err = clk_prepare_enable(bs->clk);
if (err) {
dev_err(&pdev->dev, "could not prepare clock: %d\n", err);
- goto out_master_put;
+ return err;
}
/* just checking if the clock returns a sane value */
@@ -495,8 +491,6 @@ static int bcm2835aux_spi_probe(struct p
out_clk_disable:
clk_disable_unprepare(bs->clk);
-out_master_put:
- spi_master_put(master);
return err;
}
From: Dan Carpenter <[email protected]>
commit eeaf06af6f87e1dba371fbe42674e6f963220b9c upstream.
My patch caused kernel Oopses and delays in boot. Revert it.
The problem was that I moved the "mem->dma = paddr;" before the call to
be_fill_queue(). But the first thing that the be_fill_queue() function
does is memset the whole struct to zero which overwrites the assignment.
Link: https://lore.kernel.org/r/X8jXkt6eThjyVP1v@mwanda
Fixes: 38b2db564d9a ("scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()")
Cc: stable <[email protected]>
Reported-by: Thomas Lamprecht <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/be2iscsi/be_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3052,7 +3052,6 @@ static int beiscsi_create_eqs(struct bei
if (!eq_vaddress)
goto create_eq_error;
- mem->dma = paddr;
mem->va = eq_vaddress;
ret = be_fill_queue(eq, phba->params.num_eq_entries,
sizeof(struct be_eq_entry), eq_vaddress);
@@ -3062,6 +3061,7 @@ static int beiscsi_create_eqs(struct bei
goto create_eq_error;
}
+ mem->dma = paddr;
ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
phwi_context->cur_eqd);
if (ret) {
@@ -3116,7 +3116,6 @@ static int beiscsi_create_cqs(struct bei
if (!cq_vaddress)
goto create_cq_error;
- mem->dma = paddr;
ret = be_fill_queue(cq, phba->params.num_cq_entries,
sizeof(struct sol_cqe), cq_vaddress);
if (ret) {
@@ -3126,6 +3125,7 @@ static int beiscsi_create_cqs(struct bei
goto create_cq_error;
}
+ mem->dma = paddr;
ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false,
false, 0);
if (ret) {
From: Lukas Wunner <[email protected]>
commit ddf75be47ca748f8b12d28ac64d624354fddf189 upstream
CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the
same via sysfs.
But there are no precautions to prevent adding a device below a
controller that's being removed. Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down. E.g. it is then impossible to quiesce
the device's interrupt.
of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().
Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.
Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v3.19+
Cc: Geert Uytterhoeven <[email protected]>
Cc: Octavian Purdila <[email protected]>
Cc: Pantelis Antoniou <[email protected]>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/Kconfig | 3 +++
drivers/spi/spi.c | 21 ++++++++++++++++++++-
2 files changed, 23 insertions(+), 1 deletion(-)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -763,4 +763,7 @@ endif # SPI_MASTER
# (slave support would go here)
+config SPI_DYNAMIC
+ def_bool ACPI || OF_DYNAMIC || SPI_SLAVE
+
endif # SPI
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -422,6 +422,12 @@ static LIST_HEAD(spi_master_list);
*/
static DEFINE_MUTEX(board_lock);
+/*
+ * Prevents addition of devices with same chip select and
+ * addition of devices below an unregistering controller.
+ */
+static DEFINE_MUTEX(spi_add_lock);
+
/**
* spi_alloc_device - Allocate a new SPI device
* @master: Controller to which device is connected
@@ -500,7 +506,6 @@ static int spi_dev_check(struct device *
*/
int spi_add_device(struct spi_device *spi)
{
- static DEFINE_MUTEX(spi_add_lock);
struct spi_master *master = spi->master;
struct device *dev = master->dev.parent;
int status;
@@ -529,6 +534,13 @@ int spi_add_device(struct spi_device *sp
goto done;
}
+ /* Controller may unregister concurrently */
+ if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
+ !device_is_registered(&master->dev)) {
+ status = -ENODEV;
+ goto done;
+ }
+
if (master->cs_gpios)
spi->cs_gpio = master->cs_gpios[spi->chip_select];
@@ -2070,6 +2082,10 @@ static int __unregister(struct device *d
*/
void spi_unregister_master(struct spi_master *master)
{
+ /* Prevent addition of new devices, unregister existing ones */
+ if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+ mutex_lock(&spi_add_lock);
+
device_for_each_child(&master->dev, NULL, __unregister);
if (master->queued) {
@@ -2089,6 +2105,9 @@ void spi_unregister_master(struct spi_ma
if (!devres_find(master->dev.parent, devm_spi_release_master,
devm_spi_match_master, master))
put_device(&master->dev);
+
+ if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+ mutex_unlock(&spi_add_lock);
}
EXPORT_SYMBOL_GPL(spi_unregister_master);
From: Nicolin Chen <[email protected]>
commit b9ce9b0f83b536a4ac7de7567a265d28d13e5bea upstream.
This patch simply fixes a bug of referencing speedos[num] in every
for-loop iteration in get_process_id function.
Fixes: 0dc5a0d83675 ("soc/tegra: fuse: Add Tegra210 support")
Cc: <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/tegra/fuse/speedo-tegra210.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soc/tegra/fuse/speedo-tegra210.c
+++ b/drivers/soc/tegra/fuse/speedo-tegra210.c
@@ -105,7 +105,7 @@ static int get_process_id(int value, con
unsigned int i;
for (i = 0; i < num; i++)
- if (value < speedos[num])
+ if (value < speedos[i])
return i;
return -EINVAL;
From: Andy Shevchenko <[email protected]>
[ Upstream commit 0fa86fc2e28227f1e64f13867e73cf864c6d25ad ]
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).
Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-merrifield.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c
index 04d6fd2be08cc..8d0cff3146b87 100644
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -731,6 +731,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PU_EN;
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
@@ -751,6 +755,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PD_EN;
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
--
2.27.0
From: Pali Rohár <[email protected]>
[ Upstream commit b9acab091842ca8b288882798bb809f7abf5408a ]
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: a0a22cf14472f ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/loongson1-cpufreq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/loongson1-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c
index be89416e2358f..9d902f67f8716 100644
--- a/drivers/cpufreq/loongson1-cpufreq.c
+++ b/drivers/cpufreq/loongson1-cpufreq.c
@@ -217,6 +217,7 @@ static struct platform_driver ls1x_cpufreq_platdrv = {
module_platform_driver(ls1x_cpufreq_platdrv);
+MODULE_ALIAS("platform:ls1x-cpufreq");
MODULE_AUTHOR("Kelvin Cheung <[email protected]>");
MODULE_DESCRIPTION("Loongson1 CPUFreq driver");
MODULE_LICENSE("GPL");
--
2.27.0
From: Keqian Zhu <[email protected]>
[ Upstream commit 8b7770b877d187bfdae1eaf587bd2b792479a31c ]
ARM virtual counter supports event stream, it can only trigger an event
when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes,
so the actual period of event stream is 2^(cntkctl_evnti + 1). For example,
when the trigger bit is 0, then virtual counter trigger an event for every
two cycles.
While we're at it, rework the way we compute the trigger bit position
by making it more obvious that when bits [n:n-1] are both set (with n
being the most significant bit), we pick bit (n + 1).
Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream")
Suggested-by: Marc Zyngier <[email protected]>
Signed-off-by: Keqian Zhu <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/arm_arch_timer.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index a2503db7e533e..5d7f83d27093f 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -426,15 +426,24 @@ static void arch_timer_evtstrm_enable(int divider)
static void arch_timer_configure_evtstream(void)
{
- int evt_stream_div, pos;
+ int evt_stream_div, lsb;
+
+ /*
+ * As the event stream can at most be generated at half the frequency
+ * of the counter, use half the frequency when computing the divider.
+ */
+ evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ / 2;
+
+ /*
+ * Find the closest power of two to the divisor. If the adjacent bit
+ * of lsb (last set bit, starts from 0) is set, then we use (lsb + 1).
+ */
+ lsb = fls(evt_stream_div) - 1;
+ if (lsb > 0 && (evt_stream_div & BIT(lsb - 1)))
+ lsb++;
- /* Find the closest power of two to the divisor */
- evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
- pos = fls(evt_stream_div);
- if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
- pos--;
/* enable event stream */
- arch_timer_evtstrm_enable(min(pos, 15));
+ arch_timer_evtstrm_enable(max(0, min(lsb, 15)));
}
static void arch_counter_set_user_access(void)
--
2.27.0
From: Takashi Iwai <[email protected]>
commit 9df28edce7c6ab38050235f6f8b43dd7ccd01b6d upstream.
Some buggy firmware don't give the current sample rate but leaves
zero. Handle this case more gracefully without warning but just skip
the current rate verification from the next time.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/clock.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -327,6 +327,12 @@ static int set_sample_rate_v1(struct snd
}
crate = data[0] | (data[1] << 8) | (data[2] << 16);
+ if (!crate) {
+ dev_info(&dev->dev, "failed to read current rate; disabling the check\n");
+ chip->sample_rate_read_error = 3; /* three strikes, see above */
+ return 0;
+ }
+
if (crate != rate) {
dev_warn(&dev->dev, "current rate %d is different from the runtime rate %d\n", crate, rate);
// runtime->rate = crate;
From: Jubin Zhong <[email protected]>
commit 4684709bf81a2d98152ed6b610e3d5c403f9bced upstream.
If kobject_init_and_add() fails, pci_slot_release() is called to delete
slot->list from parent->slots. But slot->list hasn't been initialized
yet, so we dereference a NULL pointer:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
...
CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.4.240 #197
task: ffffeb398a45ef10 task.stack: ffffeb398a470000
PC is at __list_del_entry_valid+0x5c/0xb0
LR is at pci_slot_release+0x84/0xe4
...
__list_del_entry_valid+0x5c/0xb0
pci_slot_release+0x84/0xe4
kobject_put+0x184/0x1c4
pci_create_slot+0x17c/0x1b4
__pci_hp_initialize+0x68/0xa4
pciehp_probe+0x1a4/0x2fc
pcie_port_probe_service+0x58/0x84
driver_probe_device+0x320/0x470
Initialize slot->list before calling kobject_init_and_add() to avoid this.
Fixes: 8a94644b440e ("PCI: Fix pci_create_slot() reference count leak")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jubin Zhong <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected] # v5.9+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/slot.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -307,6 +307,9 @@ placeholder:
goto err;
}
+ INIT_LIST_HEAD(&slot->list);
+ list_add(&slot->list, &parent->slots);
+
err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL,
"%s", slot_name);
if (err) {
@@ -314,9 +317,6 @@ placeholder:
goto err;
}
- INIT_LIST_HEAD(&slot->list);
- list_add(&slot->list, &parent->slots);
-
down_read(&pci_bus_sem);
list_for_each_entry(dev, &parent->devices, bus_list)
if (PCI_SLOT(dev->devfn) == slot_nr)
From: Zheng Zengkai <[email protected]>
[ Upstream commit 2eb5dd418034ecea2f7031e3d33f2991a878b148 ]
When using 'perf record's option '-I' or '--user-regs=' along with
argument '?' to list available register names, memory of variable 'os'
allocated by strdup() needs to be released before __parse_regs()
returns, otherwise memory leak will occur.
Fixes: bcc84ec65ad1 ("perf record: Add ability to name registers to record")
Signed-off-by: Zheng Zengkai <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Li Bin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/parse-regs-options.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/parse-regs-options.c b/tools/perf/util/parse-regs-options.c
index 646ecf736aadb..be2ab1091c2bb 100644
--- a/tools/perf/util/parse-regs-options.c
+++ b/tools/perf/util/parse-regs-options.c
@@ -40,7 +40,7 @@ parse_regs(const struct option *opt, const char *str, int unset)
}
fputc('\n', stderr);
/* just printing available regs */
- return -1;
+ goto error;
}
for (r = sample_reg_masks; r->name; r++) {
if (!strcasecmp(s, r->name))
--
2.27.0
From: Johan Hovold <[email protected]>
commit 696c541c8c6cfa05d65aa24ae2b9e720fc01766e upstream.
Commit c528fcb116e6 ("USB: serial: keyspan_pda: fix receive sanity
checks") broke write-unthrottle handling by dropping well-formed
unthrottle-interrupt packets which are precisely two bytes long. This
could lead to blocked writers not being woken up when buffer space again
becomes available.
Instead, stop unconditionally printing the third byte which is
(presumably) only valid on modem-line changes.
Fixes: c528fcb116e6 ("USB: serial: keyspan_pda: fix receive sanity checks")
Cc: stable <[email protected]> # 4.11
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan_pda.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -176,11 +176,11 @@ static void keyspan_pda_rx_interrupt(str
break;
case 1:
/* status interrupt */
- if (len < 3) {
+ if (len < 2) {
dev_warn(&port->dev, "short interrupt message received\n");
break;
}
- dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
+ dev_dbg(&port->dev, "rx int, d1=%d\n", data[1]);
switch (data[1]) {
case 1: /* modemline change */
break;
From: kazuo ito <[email protected]>
[ Upstream commit 4420440c57892779f265108f46f83832a88ca795 ]
The warning message from nfsd terminating normally
can confuse system adminstrators or monitoring software.
Though it's not exactly fair to pin-point a commit where it
originated, the current form in the current place started
to appear in:
Fixes: e096bbc6488d ("knfsd: remove special handling for SIGHUP")
Signed-off-by: kazuo ito <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/nfssvc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 60291d10f8e4a..6bb3f3a98d7de 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -393,8 +393,7 @@ static void nfsd_last_thread(struct svc_serv *serv, struct net *net)
return;
nfsd_shutdown_net(net);
- printk(KERN_WARNING "nfsd: last server has exited, flushing export "
- "cache\n");
+ pr_info("nfsd: last server has exited, flushing export cache\n");
nfsd_export_flush(net);
}
--
2.27.0
From: Yang Yingliang <[email protected]>
[ Upstream commit d1b928ee1cfa965a3327bbaa59bfa005d97fa0fe ]
The flush_lock is uninitialized, use DEFINE_SPINLOCK
to define and initialize flush_lock.
Fixes: c6e3fd22cd53 ("Staging: add speakup to the staging directory")
Reported-by: Hulk Robot <[email protected]>
Reviewed-by: Samuel Thibault <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/speakup/speakup_dectlk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c
index 764656759fbf4..1079b11fff4bc 100644
--- a/drivers/staging/speakup/speakup_dectlk.c
+++ b/drivers/staging/speakup/speakup_dectlk.c
@@ -47,7 +47,7 @@ static unsigned char get_index(void);
static int in_escape;
static int is_flushing;
-static spinlock_t flush_lock;
+static DEFINE_SPINLOCK(flush_lock);
static DECLARE_WAIT_QUEUE_HEAD(flush);
static struct var_t vars[] = {
--
2.27.0
From: Cristian Birsan <[email protected]>
[ Upstream commit be4dd2d448816a27c1446f8f37fce375daf64148 ]
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Cristian Birsan <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 44d1171c7fc04..4ce8656293837 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -152,6 +152,11 @@
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
};
+ pinctrl_usb_default: usb_default {
+ atmel,pins =
+ <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
pinctrl_key_gpio: key_gpio_0 {
atmel,pins =
<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -177,6 +182,8 @@
&pioE 11 GPIO_ACTIVE_HIGH
&pioE 14 GPIO_ACTIVE_HIGH
>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
--
2.27.0
From: Dmitry Torokhov <[email protected]>
[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ]
req->sample[1] is not naturally aligned at word boundary, and therefore we
should use get_unaligned_be16() when accessing it.
Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support")
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/ads7846.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 9fa7ae12df80a..b77a2178fdec4 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -35,6 +35,7 @@
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <asm/irq.h>
+#include <asm/unaligned.h>
/*
* This code has been heavily tested on a Nokia 770, and lightly
@@ -410,7 +411,7 @@ static int ads7845_read12_ser(struct device *dev, unsigned command)
if (status == 0) {
/* BE12 value, then padding */
- status = be16_to_cpu(*((u16 *)&req->sample[1]));
+ status = get_unaligned_be16(&req->sample[1]);
status = status >> 3;
status &= 0x0fff;
}
--
2.27.0
From: Li Jun <[email protected]>
commit c1373f10479b624fb6dba0805d673e860f1b421d upstream.
If a USB2 device wakeup is not enabled/supported the link state may
still be in U0 in xhci_bus_suspend(), where it's then manually put
to suspended U3 state.
Just as with selective suspend the device needs time to enter U3
suspend before continuing with further suspend operations
(e.g. system suspend), otherwise we may enter system suspend with link
state in U0.
[commit message rewording -Mathias]
Cc: <[email protected]>
Signed-off-by: Li Jun <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1424,6 +1424,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (bus_state->bus_suspended)
+ usleep_range(5000, 10000);
+
return 0;
}
From: Martin Blumenstingl <[email protected]>
[ Upstream commit 82ca4c922b8992013a238d65cf4e60cc33e12f36 ]
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.
While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.
Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -30,7 +30,6 @@
#define PRG_ETH0_RGMII_MODE BIT(0)
/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
-#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
#define PRG_ETH0_TXDLY_SHIFT 5
@@ -123,8 +122,9 @@ static int meson8b_init_clk(struct meson
init.num_parents = MUX_CLK_NUM_PARENTS;
dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
- dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
- dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
+ dwmac->m250_mux.shift = __ffs(PRG_ETH0_CLK_M250_SEL_MASK);
+ dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK >>
+ dwmac->m250_mux.shift;
dwmac->m250_mux.flags = 0;
dwmac->m250_mux.table = NULL;
dwmac->m250_mux.hw.init = &init;
From: Neal Cardwell <[email protected]>
[ Upstream commit 299bcb55ecd1412f6df606e9dc0912d55610029e ]
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:
(1) ACK for full-sized skb of N*MSS arrives
-> tcp_write_xmit() transmit full-sized skb with N*MSS
-> move pacing release time forward
-> exit tcp_write_xmit() because pacing time is in the future
(2) TSQ callback or TCP internal pacing timer fires
-> try to transmit next skb, but TSO deferral finds remainder of
available cwnd is not big enough to trigger an immediate send
now, so we defer sending until the next ACK.
(3) repeat...
So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:
o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.
o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.
Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Reported-by: Ingemar Johansson <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1532,7 +1532,8 @@ static void tcp_cwnd_validate(struct soc
* window, and remember whether we were cwnd-limited then.
*/
if (!before(tp->snd_una, tp->max_packets_seq) ||
- tp->packets_out > tp->max_packets_out) {
+ tp->packets_out > tp->max_packets_out ||
+ is_cwnd_limited) {
tp->max_packets_out = tp->packets_out;
tp->max_packets_seq = tp->snd_nxt;
tp->is_cwnd_limited = is_cwnd_limited;
@@ -2259,6 +2260,10 @@ repair:
break;
}
+ is_cwnd_limited |= (tcp_packets_in_flight(tp) >= tp->snd_cwnd);
+ if (likely(sent_pkts || is_cwnd_limited))
+ tcp_cwnd_validate(sk, is_cwnd_limited);
+
if (likely(sent_pkts)) {
if (tcp_in_cwnd_reduction(sk))
tp->prr_out += sent_pkts;
@@ -2266,8 +2271,6 @@ repair:
/* Send one loss probe per tail loss episode. */
if (push_one != 2)
tcp_schedule_loss_probe(sk);
- is_cwnd_limited |= (tcp_packets_in_flight(tp) >= tp->snd_cwnd);
- tcp_cwnd_validate(sk, is_cwnd_limited);
return false;
}
return !tp->packets_out && tcp_send_head(sk);
On Mon, Dec 28, 2020 at 01:47:33PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.249 release.
> There are 175 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 30 Dec 2020 12:48:23 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 168 fail: 0
Qemu test results:
total: 382 pass: 382 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Mon, 28 Dec 2020 at 18:30, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.249 release.
> There are 175 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 30 Dec 2020 12:48:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.249-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 4.9.249-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: cde5fe0304e36dea08f5ad6651d19a906da97d71
git describe: v4.9.248-176-gcde5fe0304e3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.248-176-gcde5fe0304e3
No regressions (compared to build v4.9.248)
No fixes (compared to build v4.9.248)
Ran 32769 total tests in the following environments and test suites.
Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- mips
- qemu-arm64-kasan
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- sparc
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fs-tests
* ltp-sched-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* fwts
* ltp-commands-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
--
Linaro LKFT
https://lkft.linaro.org