2021-01-12 13:32:20

by Dmitry Osipenko

[permalink] [raw]
Subject: [PATCH v1 1/2] gpio: tegra: Fix wake interrupt

The GPIO bank wake interrupt setting was erroneously removed after
conversion to gpio_irq_chip, thus the wake interrupt programming is
broken now. Secondly, the wake_enb of the GPIO driver should be changed
only after the successful toggling of the IRQ wake-state. Restore the wake
interrupt setting and the programming order.

Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Signed-off-by: Dmitry Osipenko <[email protected]>
---
drivers/gpio/gpio-tegra.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index b8a4fd07c559..6c79e9d2f932 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -541,6 +541,7 @@ static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
struct tegra_gpio_bank *bank;
unsigned int gpio = d->hwirq;
u32 port, bit, mask;
+ int err;

bank = &tgi->bank_info[GPIO_BANK(d->hwirq)];

@@ -548,14 +549,23 @@ static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
bit = GPIO_BIT(gpio);
mask = BIT(bit);

+ err = irq_set_irq_wake(tgi->irqs[bank->bank], enable);
+ if (err)
+ return err;
+
+ if (d->parent_data) {
+ err = irq_chip_set_wake_parent(d, enable);
+ if (err) {
+ irq_set_irq_wake(tgi->irqs[bank->bank], !enable);
+ return err;
+ }
+ }
+
if (enable)
bank->wake_enb[port] |= mask;
else
bank->wake_enb[port] &= ~mask;

- if (d->parent_data)
- return irq_chip_set_wake_parent(d, enable);
-
return 0;
}
#endif
--
2.29.2


2021-01-18 13:44:23

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v1 1/2] gpio: tegra: Fix wake interrupt

On Tue, Jan 12, 2021 at 2:30 PM Dmitry Osipenko <[email protected]> wrote:

> The GPIO bank wake interrupt setting was erroneously removed after
> conversion to gpio_irq_chip, thus the wake interrupt programming is
> broken now. Secondly, the wake_enb of the GPIO driver should be changed
> only after the successful toggling of the IRQ wake-state. Restore the wake
> interrupt setting and the programming order.
>
> Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
> Signed-off-by: Dmitry Osipenko <[email protected]>

Acked-by: Linus Walleij <[email protected]>

Yours,
Linus Walleij

2021-01-19 13:25:59

by Bartosz Golaszewski

[permalink] [raw]
Subject: Re: [PATCH v1 1/2] gpio: tegra: Fix wake interrupt

On Tue, Jan 12, 2021 at 2:30 PM Dmitry Osipenko <[email protected]> wrote:
>
> The GPIO bank wake interrupt setting was erroneously removed after
> conversion to gpio_irq_chip, thus the wake interrupt programming is
> broken now. Secondly, the wake_enb of the GPIO driver should be changed
> only after the successful toggling of the IRQ wake-state. Restore the wake
> interrupt setting and the programming order.
>
> Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
> Signed-off-by: Dmitry Osipenko <[email protected]>
> ---
> drivers/gpio/gpio-tegra.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
> index b8a4fd07c559..6c79e9d2f932 100644
> --- a/drivers/gpio/gpio-tegra.c
> +++ b/drivers/gpio/gpio-tegra.c
> @@ -541,6 +541,7 @@ static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
> struct tegra_gpio_bank *bank;
> unsigned int gpio = d->hwirq;
> u32 port, bit, mask;
> + int err;
>
> bank = &tgi->bank_info[GPIO_BANK(d->hwirq)];
>
> @@ -548,14 +549,23 @@ static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
> bit = GPIO_BIT(gpio);
> mask = BIT(bit);
>
> + err = irq_set_irq_wake(tgi->irqs[bank->bank], enable);
> + if (err)
> + return err;
> +
> + if (d->parent_data) {
> + err = irq_chip_set_wake_parent(d, enable);
> + if (err) {
> + irq_set_irq_wake(tgi->irqs[bank->bank], !enable);
> + return err;
> + }
> + }
> +
> if (enable)
> bank->wake_enb[port] |= mask;
> else
> bank->wake_enb[port] &= ~mask;
>
> - if (d->parent_data)
> - return irq_chip_set_wake_parent(d, enable);
> -
> return 0;
> }
> #endif
> --
> 2.29.2
>

Applied, thanks!

Bartosz