From: Filipe Laíns <[email protected]>
Tested with the G Pro X Superlight. libratbag sees the device, as
expected, and input events are passing trough.
https://github.com/libratbag/libratbag/pull/1122
The receiver has a quirk where the moused interface doesn't have a
report ID, I am not sure why, perhaps they forgot. All other interfaces
have report IDs so I am left scratching my head.
Since this driver doesn't have a quirk system, I simply implemented it
as a different receiver type, which is true, it just wouldn't be the
prefered approach :P
Signed-off-by: Filipe Laíns <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-logitech-dj.c | 49 +++++++++++++++++++++++++----------
2 files changed, 37 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4c5f23640f9c..8eac3c93fa38 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -803,6 +803,7 @@
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc547
#define USB_DEVICE_ID_SPACETRAVELLER 0xc623
#define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
#define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 1401ee2067ca..6596c81947a8 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -114,6 +114,7 @@ enum recvr_type {
recvr_type_dj,
recvr_type_hidpp,
recvr_type_gaming_hidpp,
+ recvr_type_gaming_hidpp_missing_mse_report_id, /* lightspeed receiver missing the mouse report ID */
recvr_type_mouse_only,
recvr_type_27mhz,
recvr_type_bluetooth,
@@ -1360,6 +1361,7 @@ static int logi_dj_ll_parse(struct hid_device *hid)
dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n",
__func__, djdev->reports_supported);
if (djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp ||
+ djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id ||
djdev->dj_receiver_dev->type == recvr_type_mouse_only)
rdcat(rdesc, &rsize, mse_high_res_descriptor,
sizeof(mse_high_res_descriptor));
@@ -1605,19 +1607,35 @@ static int logi_dj_raw_event(struct hid_device *hdev,
data[0] = data[1];
data[1] = 0;
}
- /*
- * Mouse-only receivers send unnumbered mouse data. The 27 MHz
- * receiver uses 6 byte packets, the nano receiver 8 bytes.
- */
- if (djrcv_dev->unnumbered_application == HID_GD_MOUSE &&
- size <= 8) {
- u8 mouse_report[9];
-
- /* Prepend report id */
- mouse_report[0] = REPORT_TYPE_MOUSE;
- memcpy(mouse_report + 1, data, size);
- logi_dj_recv_forward_input_report(hdev, mouse_report,
- size + 1);
+
+
+ if (djrcv_dev->unnumbered_application == HID_GD_MOUSE) {
+ /*
+ * Mouse-only receivers send unnumbered mouse data. The 27 MHz
+ * receiver uses 6 byte packets, the nano receiver 8 bytes.
+ */
+ if (size <= 8) {
+ u8 mouse_report[9];
+
+ /* Prepend report id */
+ mouse_report[0] = REPORT_TYPE_MOUSE;
+ memcpy(mouse_report + 1, data, size);
+ logi_dj_recv_forward_input_report(hdev, mouse_report,
+ size + 1);
+
+ /*
+ * A variant of the ligtpseed receivers is missing the mouse
+ * report ID.
+ */
+ } else if (djrcv_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id) {
+ u8 mouse_report[17];
+
+ /* Prepend report id */
+ mouse_report[0] = REPORT_TYPE_MOUSE;
+ memcpy(mouse_report + 1, data, size);
+ logi_dj_recv_forward_input_report(hdev, mouse_report,
+ size + 1);
+ }
}
return false;
@@ -1688,6 +1706,7 @@ static int logi_dj_probe(struct hid_device *hdev,
case recvr_type_dj: no_dj_interfaces = 3; break;
case recvr_type_hidpp: no_dj_interfaces = 2; break;
case recvr_type_gaming_hidpp: no_dj_interfaces = 3; break;
+ case recvr_type_gaming_hidpp_missing_mse_report_id: no_dj_interfaces = 3; break;
case recvr_type_mouse_only: no_dj_interfaces = 2; break;
case recvr_type_27mhz: no_dj_interfaces = 2; break;
case recvr_type_bluetooth: no_dj_interfaces = 2; break;
@@ -1886,6 +1905,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
.driver_data = recvr_type_gaming_hidpp},
+ { /* Logitech lightspeed receiver (0xc547) */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
+ .driver_data = recvr_type_gaming_hidpp_missing_mse_report_id},
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
.driver_data = recvr_type_27mhz},
--
2.30.0
From: Filipe Laíns <[email protected]>
Tested and is working :)
Signed-off-by: Filipe Laíns <[email protected]>
---
drivers/hid/hid-logitech-hidpp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 291c6b4d26b7..54a289510a7d 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4268,6 +4268,8 @@ static const struct hid_device_id hidpp_devices[] = {
.driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
{ /* Logitech G Pro Gaming Mouse over USB */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) },
+ { /* Logitech G Pro X Superlight Gaming Mouse over USB */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
{ /* MX5000 keyboard over Bluetooth */
HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb305),
--
2.30.0
On Sat, 23 Jan 2021, Filipe Laíns wrote:
> From: Filipe Laíns <[email protected]>
>
> Tested with the G Pro X Superlight. libratbag sees the device, as
> expected, and input events are passing trough.
>
> https://github.com/libratbag/libratbag/pull/1122
>
> The receiver has a quirk where the moused interface doesn't have a
> report ID, I am not sure why, perhaps they forgot. All other interfaces
> have report IDs so I am left scratching my head.
> Since this driver doesn't have a quirk system, I simply implemented it
> as a different receiver type, which is true, it just wouldn't be the
> prefered approach :P
Benjamin, do you have any other idea how to accomplish this without this
kind of spaghetti-style conditions?
If not, I am tempted to apply the patch as is.
Thanks,
--
Jiri Kosina
SUSE Labs
On Fri, 2021-02-05 at 16:14 +0100, Jiri Kosina wrote:
> On Sat, 23 Jan 2021, Filipe Laíns wrote:
>
> > From: Filipe Laíns <[email protected]>
> >
> > Tested with the G Pro X Superlight. libratbag sees the device, as
> > expected, and input events are passing trough.
> >
> > https://github.com/libratbag/libratbag/pull/1122
> >
> > The receiver has a quirk where the moused interface doesn't have a
> > report ID, I am not sure why, perhaps they forgot. All other interfaces
> > have report IDs so I am left scratching my head.
> > Since this driver doesn't have a quirk system, I simply implemented it
> > as a different receiver type, which is true, it just wouldn't be the
> > prefered approach :P
>
> Benjamin, do you have any other idea how to accomplish this without this
> kind of spaghetti-style conditions?
> If not, I am tempted to apply the patch as is.
>
> Thanks,
>
Hi Benjamin, Jiri,
Could we get an update on this?
Cheers,
Filipe Laíns
On Sat, Jan 23, 2021 at 7:03 PM Filipe Laíns <[email protected]> wrote:
>
> From: Filipe Laíns <[email protected]>
>
> Tested with the G Pro X Superlight. libratbag sees the device, as
> expected, and input events are passing trough.
>
> https://github.com/libratbag/libratbag/pull/1122
>
> The receiver has a quirk where the moused interface doesn't have a
> report ID, I am not sure why, perhaps they forgot. All other interfaces
> have report IDs so I am left scratching my head.
> Since this driver doesn't have a quirk system, I simply implemented it
> as a different receiver type, which is true, it just wouldn't be the
> prefered approach :P
>
> Signed-off-by: Filipe Laíns <[email protected]>
> ---
> drivers/hid/hid-ids.h | 1 +
> drivers/hid/hid-logitech-dj.c | 49 +++++++++++++++++++++++++----------
> 2 files changed, 37 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 4c5f23640f9c..8eac3c93fa38 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -803,6 +803,7 @@
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
> #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
> +#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc547
> #define USB_DEVICE_ID_SPACETRAVELLER 0xc623
> #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
> #define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> index 1401ee2067ca..6596c81947a8 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -114,6 +114,7 @@ enum recvr_type {
> recvr_type_dj,
> recvr_type_hidpp,
> recvr_type_gaming_hidpp,
> + recvr_type_gaming_hidpp_missing_mse_report_id, /* lightspeed receiver missing the mouse report ID */
> recvr_type_mouse_only,
> recvr_type_27mhz,
> recvr_type_bluetooth,
> @@ -1360,6 +1361,7 @@ static int logi_dj_ll_parse(struct hid_device *hid)
> dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n",
> __func__, djdev->reports_supported);
> if (djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp ||
> + djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id ||
> djdev->dj_receiver_dev->type == recvr_type_mouse_only)
> rdcat(rdesc, &rsize, mse_high_res_descriptor,
> sizeof(mse_high_res_descriptor));
> @@ -1605,19 +1607,35 @@ static int logi_dj_raw_event(struct hid_device *hdev,
> data[0] = data[1];
> data[1] = 0;
> }
> - /*
> - * Mouse-only receivers send unnumbered mouse data. The 27 MHz
> - * receiver uses 6 byte packets, the nano receiver 8 bytes.
> - */
> - if (djrcv_dev->unnumbered_application == HID_GD_MOUSE &&
> - size <= 8) {
> - u8 mouse_report[9];
> -
> - /* Prepend report id */
> - mouse_report[0] = REPORT_TYPE_MOUSE;
> - memcpy(mouse_report + 1, data, size);
> - logi_dj_recv_forward_input_report(hdev, mouse_report,
> - size + 1);
> +
> +
> + if (djrcv_dev->unnumbered_application == HID_GD_MOUSE) {
> + /*
> + * Mouse-only receivers send unnumbered mouse data. The 27 MHz
> + * receiver uses 6 byte packets, the nano receiver 8 bytes.
> + */
> + if (size <= 8) {
> + u8 mouse_report[9];
Hmm, as stated above, the 27 MHz receiver already does the exact same thing.
Can't we just bump the array size and check above to the following:
if (size <= 16) {
u8 mouse_report[17];
The property "djrcv_dev->unnumbered_application" is based on the
report descriptor entirely, and they are just following the HID norm
here. So I think this should be enough.
Cheers,
Benjamin
> +
> + /* Prepend report id */
> + mouse_report[0] = REPORT_TYPE_MOUSE;
> + memcpy(mouse_report + 1, data, size);
> + logi_dj_recv_forward_input_report(hdev, mouse_report,
> + size + 1);
> +
> + /*
> + * A variant of the ligtpseed receivers is missing the mouse
> + * report ID.
> + */
> + } else if (djrcv_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id) {
> + u8 mouse_report[17];
> +
> + /* Prepend report id */
> + mouse_report[0] = REPORT_TYPE_MOUSE;
> + memcpy(mouse_report + 1, data, size);
> + logi_dj_recv_forward_input_report(hdev, mouse_report,
> + size + 1);
> + }
> }
>
> return false;
> @@ -1688,6 +1706,7 @@ static int logi_dj_probe(struct hid_device *hdev,
> case recvr_type_dj: no_dj_interfaces = 3; break;
> case recvr_type_hidpp: no_dj_interfaces = 2; break;
> case recvr_type_gaming_hidpp: no_dj_interfaces = 3; break;
> + case recvr_type_gaming_hidpp_missing_mse_report_id: no_dj_interfaces = 3; break;
> case recvr_type_mouse_only: no_dj_interfaces = 2; break;
> case recvr_type_27mhz: no_dj_interfaces = 2; break;
> case recvr_type_bluetooth: no_dj_interfaces = 2; break;
> @@ -1886,6 +1905,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> .driver_data = recvr_type_gaming_hidpp},
> + { /* Logitech lightspeed receiver (0xc547) */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
> + .driver_data = recvr_type_gaming_hidpp_missing_mse_report_id},
> { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
> .driver_data = recvr_type_27mhz},
> --
> 2.30.0
>
Hi Filipe,
On Mon, Mar 1, 2021 at 3:46 PM Benjamin Tissoires <[email protected]> wrote:
>
> On Sat, Jan 23, 2021 at 7:03 PM Filipe Laíns <[email protected]> wrote:
> >
> > From: Filipe Laíns <[email protected]>
> >
> > Tested with the G Pro X Superlight. libratbag sees the device, as
> > expected, and input events are passing trough.
> >
> > https://github.com/libratbag/libratbag/pull/1122
> >
> > The receiver has a quirk where the moused interface doesn't have a
> > report ID, I am not sure why, perhaps they forgot. All other interfaces
> > have report IDs so I am left scratching my head.
> > Since this driver doesn't have a quirk system, I simply implemented it
> > as a different receiver type, which is true, it just wouldn't be the
> > prefered approach :P
> >
> > Signed-off-by: Filipe Laíns <[email protected]>
> > ---
> > drivers/hid/hid-ids.h | 1 +
> > drivers/hid/hid-logitech-dj.c | 49 +++++++++++++++++++++++++----------
> > 2 files changed, 37 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> > index 4c5f23640f9c..8eac3c93fa38 100644
> > --- a/drivers/hid/hid-ids.h
> > +++ b/drivers/hid/hid-ids.h
> > @@ -803,6 +803,7 @@
> > #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
> > #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
> > #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
> > +#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc547
> > #define USB_DEVICE_ID_SPACETRAVELLER 0xc623
> > #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
> > #define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> > index 1401ee2067ca..6596c81947a8 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -114,6 +114,7 @@ enum recvr_type {
> > recvr_type_dj,
> > recvr_type_hidpp,
> > recvr_type_gaming_hidpp,
> > + recvr_type_gaming_hidpp_missing_mse_report_id, /* lightspeed receiver missing the mouse report ID */
> > recvr_type_mouse_only,
> > recvr_type_27mhz,
> > recvr_type_bluetooth,
> > @@ -1360,6 +1361,7 @@ static int logi_dj_ll_parse(struct hid_device *hid)
> > dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n",
> > __func__, djdev->reports_supported);
> > if (djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp ||
> > + djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id ||
> > djdev->dj_receiver_dev->type == recvr_type_mouse_only)
> > rdcat(rdesc, &rsize, mse_high_res_descriptor,
> > sizeof(mse_high_res_descriptor));
> > @@ -1605,19 +1607,35 @@ static int logi_dj_raw_event(struct hid_device *hdev,
> > data[0] = data[1];
> > data[1] = 0;
> > }
> > - /*
> > - * Mouse-only receivers send unnumbered mouse data. The 27 MHz
> > - * receiver uses 6 byte packets, the nano receiver 8 bytes.
> > - */
> > - if (djrcv_dev->unnumbered_application == HID_GD_MOUSE &&
> > - size <= 8) {
> > - u8 mouse_report[9];
> > -
> > - /* Prepend report id */
> > - mouse_report[0] = REPORT_TYPE_MOUSE;
> > - memcpy(mouse_report + 1, data, size);
> > - logi_dj_recv_forward_input_report(hdev, mouse_report,
> > - size + 1);
> > +
> > +
> > + if (djrcv_dev->unnumbered_application == HID_GD_MOUSE) {
> > + /*
> > + * Mouse-only receivers send unnumbered mouse data. The 27 MHz
> > + * receiver uses 6 byte packets, the nano receiver 8 bytes.
> > + */
> > + if (size <= 8) {
> > + u8 mouse_report[9];
>
> Hmm, as stated above, the 27 MHz receiver already does the exact same thing.
>
> Can't we just bump the array size and check above to the following:
>
> if (size <= 16) {
> u8 mouse_report[17];
>
> The property "djrcv_dev->unnumbered_application" is based on the
> report descriptor entirely, and they are just following the HID norm
> here. So I think this should be enough.
I've been pinged last week about the G Pro X superlight, and Peter found
that this patch never got into upstream.
AFAICT, compared to upstream the following code change should have the
same effect that what you proposed here:
---
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 7106b921b53c..f5cdfce272e7 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1691,11 +1691,12 @@ static int logi_dj_raw_event(struct hid_device *hdev,
}
/*
* Mouse-only receivers send unnumbered mouse data. The 27 MHz
- * receiver uses 6 byte packets, the nano receiver 8 bytes.
+ * receiver uses 6 byte packets, the nano receiver 8 bytes and
+ * some gaming ones are using 16 bytes.
*/
if (djrcv_dev->unnumbered_application == HID_GD_MOUSE &&
- size <= 8) {
- u8 mouse_report[9];
+ size <= 16) {
+ u8 mouse_report[17];
/* Prepend report id */
mouse_report[0] = REPORT_TYPE_MOUSE;
---
Would you mind sending a v2 of the patch updated to the current for-next so we can schedule this for 5.17?
Cheers,
Benjamin
>
> Cheers,
> Benjamin
>
> > +
> > + /* Prepend report id */
> > + mouse_report[0] = REPORT_TYPE_MOUSE;
> > + memcpy(mouse_report + 1, data, size);
> > + logi_dj_recv_forward_input_report(hdev, mouse_report,
> > + size + 1);
> > +
> > + /*
> > + * A variant of the ligtpseed receivers is missing the mouse
> > + * report ID.
> > + */
> > + } else if (djrcv_dev->type == recvr_type_gaming_hidpp_missing_mse_report_id) {
> > + u8 mouse_report[17];
> > +
> > + /* Prepend report id */
> > + mouse_report[0] = REPORT_TYPE_MOUSE;
> > + memcpy(mouse_report + 1, data, size);
> > + logi_dj_recv_forward_input_report(hdev, mouse_report,
> > + size + 1);
> > + }
> > }
> >
> > return false;
> > @@ -1688,6 +1706,7 @@ static int logi_dj_probe(struct hid_device *hdev,
> > case recvr_type_dj: no_dj_interfaces = 3; break;
> > case recvr_type_hidpp: no_dj_interfaces = 2; break;
> > case recvr_type_gaming_hidpp: no_dj_interfaces = 3; break;
> > + case recvr_type_gaming_hidpp_missing_mse_report_id: no_dj_interfaces = 3; break;
> > case recvr_type_mouse_only: no_dj_interfaces = 2; break;
> > case recvr_type_27mhz: no_dj_interfaces = 2; break;
> > case recvr_type_bluetooth: no_dj_interfaces = 2; break;
> > @@ -1886,6 +1905,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> > .driver_data = recvr_type_gaming_hidpp},
> > + { /* Logitech lightspeed receiver (0xc547) */
> > + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
> > + .driver_data = recvr_type_gaming_hidpp_missing_mse_report_id},
> > { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
> > .driver_data = recvr_type_27mhz},
> > --
> > 2.30.0
> >