2021-02-18 05:33:49

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 00/15] ACPI support for dpaa2 driver


This patch set provides ACPI support to DPAA2 network drivers.

It also introduces new fwnode based APIs to support phylink and phy
layers
Following functions are defined:
phylink_fwnode_phy_connect()
fwnode_mdiobus_register_phy()
fwnode_mdiobus_register()
fwnode_get_phy_id()
fwnode_phy_find_device()
device_phy_find_device()
fwnode_get_phy_node()
fwnode_mdio_find_device()
acpi_get_local_address()

First one helps in connecting phy to phylink instance.
Next three helps in getting phy_id and registering phy to mdiobus
Next two help in finding a phy on a mdiobus.
Next one helps in getting phy_node from a fwnode.
Last one is used to get local address from _ADR object.

Corresponding OF functions are refactored.

Tested-on: T2080RDB, LS1046ARDB, LS2088ARDB and LX2160ARDB


Changes in v6:
- Minor cleanup
- Initialize mii_ts to NULL
- use GENMASK() and ACPI_COMPANION_SET()
- some cleanup
- remove unwanted header inclusion
- remove OF check for fixed-link
- use dev_fwnode()
- remove useless else
- replace of_device_is_available() to fwnode_device_is_available()

Changes in v5:
- More cleanup
- Replace fwnode_get_id() with acpi_get_local_address()
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4:
- More cleanup
- Improve code structure to handle all cases
- Remove redundant else from fwnode_mdiobus_register()
- Cleanup xgmac_mdio_probe()
- call phy_device_free() before returning

Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions

Calvin Johnson (15):
Documentation: ACPI: DSD: Document MDIO PHY
net: phy: Introduce fwnode_mdio_find_device()
net: phy: Introduce phy related fwnode functions
of: mdio: Refactor of_phy_find_device()
net: phy: Introduce fwnode_get_phy_id()
of: mdio: Refactor of_get_phy_id()
net: mdiobus: Introduce fwnode_mdiobus_register_phy()
of: mdio: Refactor of_mdiobus_register_phy()
ACPI: utils: Introduce acpi_get_local_address()
net: mdio: Add ACPI support code for mdio
net: mdiobus: Introduce fwnode_mdiobus_register()
net/fsl: Use fwnode_mdiobus_register()
net: phylink: introduce phylink_fwnode_phy_connect()
net: phylink: Refactor phylink_of_phy_connect()
net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
MAINTAINERS | 1 +
drivers/acpi/utils.c | 14 ++
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 91 +++++++-----
drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +-
drivers/net/mdio/Kconfig | 7 +
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/acpi_mdio.c | 51 +++++++
drivers/net/mdio/of_mdio.c | 79 +----------
drivers/net/phy/mdio_bus.c | 86 +++++++++++
drivers/net/phy/phy_device.c | 106 ++++++++++++++
drivers/net/phy/phylink.c | 41 ++++--
include/linux/acpi.h | 7 +
include/linux/acpi_mdio.h | 25 ++++
include/linux/mdio.h | 2 +
include/linux/of_mdio.h | 6 +-
include/linux/phy.h | 32 +++++
include/linux/phylink.h | 3 +
18 files changed, 570 insertions(+), 126 deletions(-)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
create mode 100644 drivers/net/mdio/acpi_mdio.c
create mode 100644 include/linux/acpi_mdio.h

--
2.17.1


2021-02-18 05:33:59

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 03/15] net: phy: Introduce phy related fwnode functions

Define fwnode_phy_find_device() to iterate an mdiobus and find the
phy device of the provided phy fwnode. Additionally define
device_phy_find_device() to find phy device of provided device.

Define fwnode_get_phy_node() to get phy_node using named reference.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()

Changes in v2:
- use reverse christmas tree ordering for local variables

drivers/net/phy/phy_device.c | 62 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 20 ++++++++++++
2 files changed, 82 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e673912e8938..537a25b9ee94 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -9,6 +9,7 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -2844,6 +2845,67 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
}
EXPORT_SYMBOL(fwnode_mdio_find_device);

+/**
+ * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
+ *
+ * @phy_fwnode: Pointer to the phy's fwnode.
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+ struct mdio_device *mdiodev;
+
+ mdiodev = fwnode_mdio_find_device(phy_fwnode);
+ if (!mdiodev)
+ return NULL;
+
+ if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+ return to_phy_device(&mdiodev->dev);
+
+ put_device(&mdiodev->dev);
+
+ return NULL;
+}
+EXPORT_SYMBOL(fwnode_phy_find_device);
+
+/**
+ * device_phy_find_device - For the given device, get the phy_device
+ * @dev: Pointer to the given device
+ *
+ * Refer return conditions of fwnode_phy_find_device().
+ */
+struct phy_device *device_phy_find_device(struct device *dev)
+{
+ return fwnode_phy_find_device(dev_fwnode(dev));
+}
+EXPORT_SYMBOL_GPL(device_phy_find_device);
+
+/**
+ * fwnode_get_phy_node - Get the phy_node using the named reference.
+ * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
+ *
+ * Refer return conditions of fwnode_find_reference().
+ * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
+ * and "phy-device" are not supported in ACPI. DT supports all the three
+ * named references to the phy node.
+ */
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *phy_node;
+
+ /* Only phy-handle is used for ACPI */
+ phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
+ if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
+ return phy_node;
+ phy_node = fwnode_find_reference(fwnode, "phy", 0);
+ if (IS_ERR(phy_node))
+ phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
+ return phy_node;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
+
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f5eb1e3981a1..720a2a8cf355 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1367,6 +1367,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
+struct phy_device *device_phy_find_device(struct device *dev);
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
@@ -1376,6 +1379,23 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
{
return 0;
}
+static inline
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+ return NULL;
+}
+
+static inline struct phy_device *device_phy_find_device(struct device *dev)
+{
+ return NULL;
+}
+
+static inline
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+ return NULL;
+}
+
static inline
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
--
2.17.1

2021-02-18 05:34:01

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 01/15] Documentation: ACPI: DSD: Document MDIO PHY

Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.

Describe properties "phy-handle" and "phy-mode".

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6:
- Minor cleanup

Changes in v5:
- More cleanup

Changes in v4:
- More cleanup

Changes in v3: None
Changes in v2:
- Updated with more description in document

Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst

diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..7d01ae8b3cc6
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to their respective MACs, the PHYs registered
+on the MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver needs
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+ Scope(_SB)
+ {
+ Device(MDI0) {
+ Name(_HID, "NXP0006")
+ Name(_CCA, 1)
+ Name(_UID, 0)
+ Name(_CRS, ResourceTemplate() {
+ Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+ {
+ MDI0_IT
+ }
+ }) // end of _CRS for MDI0
+ } // end of MDI0
+ }
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+ Scope(\_SB.MCE0.PR17)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+ }
+ })
+ }
+
+ Scope(\_SB.MCE0.PR18)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+ }
+ })
+ }
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
--
2.17.1

2021-02-18 05:34:46

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 06/15] of: mdio: Refactor of_get_phy_id()

With the introduction of fwnode_get_phy_id(), refactor of_get_phy_id()
to use fwnode equivalent.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

drivers/net/mdio/of_mdio.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index b5e0b5b22f1a..612a37970f14 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -29,17 +29,7 @@ MODULE_LICENSE("GPL");
* ethernet-phy-idAAAA.BBBB */
static int of_get_phy_id(struct device_node *device, u32 *phy_id)
{
- struct property *prop;
- const char *cp;
- unsigned int upper, lower;
-
- of_property_for_each_string(device, "compatible", prop, cp) {
- if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
- *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
- return 0;
- }
- }
- return -EINVAL;
+ return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
}

static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
--
2.17.1

2021-02-18 05:35:36

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 08/15] of: mdio: Refactor of_mdiobus_register_phy()

Refactor of_mdiobus_register_phy() to use fwnode_mdiobus_register_phy().

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

drivers/net/mdio/of_mdio.c | 40 +-------------------------------------
1 file changed, 1 insertion(+), 39 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index d3f7f104f1ed..a0d804cfc1f0 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -98,45 +98,7 @@ EXPORT_SYMBOL(of_mdiobus_phy_device_register);
static int of_mdiobus_register_phy(struct mii_bus *mdio,
struct device_node *child, u32 addr)
{
- struct mii_timestamper *mii_ts;
- struct phy_device *phy;
- bool is_c45;
- int rc;
- u32 phy_id;
-
- mii_ts = of_find_mii_timestamper(child);
- if (IS_ERR(mii_ts))
- return PTR_ERR(mii_ts);
-
- is_c45 = of_device_is_compatible(child,
- "ethernet-phy-ieee802.3-c45");
-
- if (!is_c45 && !of_get_phy_id(child, &phy_id))
- phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
- else
- phy = get_phy_device(mdio, addr, is_c45);
- if (IS_ERR(phy)) {
- if (mii_ts)
- unregister_mii_timestamper(mii_ts);
- return PTR_ERR(phy);
- }
-
- rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
- if (rc) {
- if (mii_ts)
- unregister_mii_timestamper(mii_ts);
- phy_device_free(phy);
- return rc;
- }
-
- /* phy->mii_ts may already be defined by the PHY driver. A
- * mii_timestamper probed via the device tree will still have
- * precedence.
- */
- if (mii_ts)
- phy->mii_ts = mii_ts;
-
- return 0;
+ return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
}

static int of_mdiobus_register_device(struct mii_bus *mdio,
--
2.17.1

2021-02-18 05:36:35

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 05/15] net: phy: Introduce fwnode_get_phy_id()

Extract phy_id from compatible string. This will be used by
fwnode_mdiobus_register_phy() to create phy device using the
phy_id.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Use traditional comparison pattern
- Use GENMASK

Changes in v2: None

drivers/net/phy/phy_device.c | 21 +++++++++++++++++++++
include/linux/phy.h | 5 +++++
2 files changed, 26 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 537a25b9ee94..5703d4229821 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -819,6 +819,27 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
return 0;
}

+/* Extract the phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB.
+ */
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+ unsigned int upper, lower;
+ const char *cp;
+ int ret;
+
+ ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+ if (ret)
+ return ret;
+
+ if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
+ return -EINVAL;
+
+ *phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
+ return 0;
+}
+EXPORT_SYMBOL(fwnode_get_phy_id);
+
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device
* struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 720a2a8cf355..4b004a65762e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1366,6 +1366,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
bool is_c45,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
struct phy_device *device_phy_find_device(struct device *dev);
@@ -1374,6 +1375,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
#else
+static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+ return 0;
+}
static inline
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
{
--
2.17.1

2021-02-18 05:37:06

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 04/15] of: mdio: Refactor of_phy_find_device()

Refactor of_phy_find_device() to use fwnode_phy_find_device().

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

drivers/net/mdio/of_mdio.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index d5e0970b2561..b5e0b5b22f1a 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -360,18 +360,7 @@ EXPORT_SYMBOL(of_mdio_find_device);
*/
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
- struct mdio_device *mdiodev;
-
- mdiodev = of_mdio_find_device(phy_np);
- if (!mdiodev)
- return NULL;
-
- if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
- return to_phy_device(&mdiodev->dev);
-
- put_device(&mdiodev->dev);
-
- return NULL;
+ return fwnode_phy_find_device(of_fwnode_handle(phy_np));
}
EXPORT_SYMBOL(of_phy_find_device);

--
2.17.1

2021-02-18 05:37:42

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy()

Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based on this create a PHY device instance which is
registered on the mdiobus.

uninitialized symbol 'mii_ts'
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6:
- Initialize mii_ts to NULL

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

drivers/net/mdio/of_mdio.c | 3 +-
drivers/net/phy/mdio_bus.c | 65 ++++++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 2 ++
include/linux/of_mdio.h | 6 +++-
4 files changed, 74 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 612a37970f14..d3f7f104f1ed 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -32,7 +32,7 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
}

-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
{
struct of_phandle_args arg;
int err;
@@ -49,6 +49,7 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)

return register_mii_timestamper(arg.np, arg.args[0]);
}
+EXPORT_SYMBOL(of_find_mii_timestamper);

int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
struct device_node *child, u32 addr)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 823518554079..6158ea6e350b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -8,6 +8,7 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -106,6 +107,70 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev)
}
EXPORT_SYMBOL(mdiobus_unregister_device);

+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+ struct fwnode_handle *child, u32 addr)
+{
+ struct mii_timestamper *mii_ts = NULL;
+ struct phy_device *phy;
+ bool is_c45 = false;
+ u32 phy_id;
+ int rc;
+
+ if (is_of_node(child)) {
+ mii_ts = of_find_mii_timestamper(to_of_node(child));
+ if (IS_ERR(mii_ts))
+ return PTR_ERR(mii_ts);
+ }
+
+ rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
+ if (rc >= 0)
+ is_c45 = true;
+
+ if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+ phy = get_phy_device(bus, addr, is_c45);
+ else
+ phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+ if (IS_ERR(phy)) {
+ if (mii_ts)
+ unregister_mii_timestamper(mii_ts);
+ return PTR_ERR(phy);
+ }
+
+ if (is_acpi_node(child)) {
+ phy->irq = bus->irq[addr];
+
+ /* Associate the fwnode with the device structure so it
+ * can be looked up later.
+ */
+ phy->mdio.dev.fwnode = child;
+
+ /* All data is now stored in the phy struct, so register it */
+ rc = phy_device_register(phy);
+ if (rc) {
+ phy_device_free(phy);
+ fwnode_handle_put(phy->mdio.dev.fwnode);
+ return rc;
+ }
+ } else if (is_of_node(child)) {
+ rc = of_mdiobus_phy_device_register(bus, phy, to_of_node(child), addr);
+ if (rc) {
+ if (mii_ts)
+ unregister_mii_timestamper(mii_ts);
+ phy_device_free(phy);
+ return rc;
+ }
+ }
+
+ /* phy->mii_ts may already be defined by the PHY driver. A
+ * mii_timestamper probed via the device tree will still have
+ * precedence.
+ */
+ if (mii_ts)
+ phy->mii_ts = mii_ts;
+ return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
+
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
{
struct mdio_device *mdiodev = bus->mdio_map[addr];
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ffb787d5ebde..7f4215c069fe 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -381,6 +381,8 @@ int mdiobus_register_device(struct mdio_device *mdiodev);
int mdiobus_unregister_device(struct mdio_device *mdiodev);
bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+ struct fwnode_handle *child, u32 addr);

/**
* mdio_module_driver() - Helper macro for registering mdio drivers
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 2b05e7f7c238..e4ee6c4d9431 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -31,6 +31,7 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
int of_phy_register_fixed_link(struct device_node *np);
void of_phy_deregister_fixed_link(struct device_node *np);
bool of_phy_is_fixed_link(struct device_node *np);
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *np);
int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
struct device_node *child, u32 addr);

@@ -118,7 +119,10 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
{
return false;
}
-
+static inline struct mii_timestamper *of_find_mii_timestamper(struct device_node *np)
+{
+ return NULL;
+}
static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
struct phy_device *phy,
struct device_node *child, u32 addr)
--
2.17.1

2021-02-18 05:39:37

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 12/15] net/fsl: Use fwnode_mdiobus_register()

fwnode_mdiobus_register() internally takes care of both DT
and ACPI cases to register mdiobus. Replace existing
of_mdiobus_register() with fwnode_mdiobus_register().

Note: For both ACPI and DT cases, endianness of MDIO controller
need to be specified using "little-endian" property.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4:
- Cleanup xgmac_mdio_probe()

Changes in v3:
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2: None

drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index bfa2826c5545..dca5305e7185 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
* QorIQ 10G MDIO Controller
*
* Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
*
* Authors: Andy Fleming <[email protected]>
* Timur Tabi <[email protected]>
@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)

static int xgmac_mdio_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
- struct mii_bus *bus;
- struct resource *res;
struct mdio_fsl_priv *priv;
+ struct resource *res;
+ struct mii_bus *bus;
int ret;

/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
goto err_ioremap;
}

+ /* For both ACPI and DT cases, endianness of MDIO controller
+ * needs to be specified using "little-endian" property.
+ */
priv->is_little_endian = device_property_read_bool(&pdev->dev,
"little-endian");

priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");

- ret = of_mdiobus_register(bus, np);
+ ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
if (ret) {
dev_err(&pdev->dev, "cannot register MDIO bus\n");
goto err_registration;
--
2.17.1

2021-02-18 05:39:44

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 11/15] net: mdiobus: Introduce fwnode_mdiobus_register()

Introduce fwnode_mdiobus_register() to register PHYs on the mdiobus.
If the fwnode is DT node, then call of_mdiobus_register().
If it is an ACPI node, then call acpi_mdiobus_register().

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4:
- Remove redundant else from fwnode_mdiobus_register()

Changes in v3:
- Use acpi_mdiobus_register()

Changes in v2: None

drivers/net/phy/mdio_bus.c | 21 +++++++++++++++++++++
include/linux/phy.h | 1 +
2 files changed, 22 insertions(+)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6158ea6e350b..4264053fdd14 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -9,6 +9,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -566,6 +567,26 @@ static int mdiobus_create_device(struct mii_bus *bus,
return ret;
}

+/**
+ * fwnode_mdiobus_register - Register mii_bus and create PHYs from fwnode
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function returns of_mdiobus_register() for DT and
+ * acpi_mdiobus_register() for ACPI.
+ */
+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ if (is_of_node(fwnode))
+ return of_mdiobus_register(mdio, to_of_node(fwnode));
+
+ if (is_acpi_node(fwnode))
+ return acpi_mdiobus_register(mdio, fwnode);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register);
+
/**
* __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
* @bus: target mii_bus
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 4b004a65762e..85a09703f251 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -391,6 +391,7 @@ static inline struct mii_bus *mdiobus_alloc(void)
return mdiobus_alloc_size(0);
}

+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
int __mdiobus_register(struct mii_bus *bus, struct module *owner);
int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus,
struct module *owner);
--
2.17.1

2021-02-18 05:41:15

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 09/15] ACPI: utils: Introduce acpi_get_local_address()

Introduce a wrapper around the _ADR evaluation.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5:
- Replace fwnode_get_id() with acpi_get_local_address()

Changes in v4:
- Improve code structure to handle all cases

Changes in v3:
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation

Changes in v2: None

drivers/acpi/utils.c | 14 ++++++++++++++
include/linux/acpi.h | 7 +++++++
2 files changed, 21 insertions(+)

diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index d5411a166685..0d3a2b111c0f 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -296,6 +296,20 @@ acpi_evaluate_integer(acpi_handle handle,

EXPORT_SYMBOL(acpi_evaluate_integer);

+int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+ unsigned long long adr;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
+ if (ACPI_FAILURE(status))
+ return -ENODATA;
+
+ *addr = (u32)adr;
+ return 0;
+}
+EXPORT_SYMBOL(acpi_get_local_address);
+
acpi_status
acpi_evaluate_reference(acpi_handle handle,
acpi_string pathname,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 053bf05fb1f7..4e5ce2b4a69d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -699,6 +699,8 @@ static inline u64 acpi_arch_get_root_pointer(void)
}
#endif

+int acpi_get_local_address(acpi_handle handle, u32 *addr);
+
#else /* !CONFIG_ACPI */

#define acpi_disabled 1
@@ -946,6 +948,11 @@ static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
return NULL;
}

+static inline int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+ return -ENODEV;
+}
+
#endif /* !CONFIG_ACPI */

#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
--
2.17.1

2021-02-18 05:41:20

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6:
- use GENMASK() and ACPI_COMPANION_SET()
- some cleanup
- remove unwanted header inclusion

Changes in v5:
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4: None
Changes in v3: None
Changes in v2: None

MAINTAINERS | 1 +
drivers/net/mdio/Kconfig | 7 +++++
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/acpi_mdio.c | 51 ++++++++++++++++++++++++++++++++++++
include/linux/acpi_mdio.h | 25 ++++++++++++++++++
5 files changed, 85 insertions(+)
create mode 100644 drivers/net/mdio/acpi_mdio.c
create mode 100644 include/linux/acpi_mdio.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 1a219335efe0..41d16d77b6cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6680,6 +6680,7 @@ F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
F: Documentation/networking/phy.rst
F: drivers/net/mdio/
+F: drivers/net/mdio/acpi_mdio.c
F: drivers/net/mdio/of_mdio.c
F: drivers/net/pcs/
F: drivers/net/phy/
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index a10cc460d7cf..df6bb7837d6a 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -27,6 +27,13 @@ config OF_MDIO
help
OpenFirmware MDIO bus (Ethernet PHY) accessors

+config ACPI_MDIO
+ def_tristate PHYLIB
+ depends on ACPI
+ depends on PHYLIB
+ help
+ ACPI MDIO bus (Ethernet PHY) accessors
+
if MDIO_BUS

config MDIO_DEVRES
diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
index 5c498dde463f..2373ade8af13 100644
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
@@ -2,6 +2,7 @@
# Makefile for Linux MDIO bus drivers

obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o

obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
new file mode 100644
index 000000000000..091c8272e596
--- /dev/null
+++ b/drivers/net/mdio/acpi_mdio.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+
+MODULE_AUTHOR("Calvin Johnson <[email protected]>");
+MODULE_LICENSE("GPL");
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *child;
+ u32 addr;
+ int ret;
+
+ /* Mask out all PHYs from auto probing. */
+ mdio->phy_mask = GENMASK(31, 0);
+ ret = mdiobus_register(mdio);
+ if (ret)
+ return ret;
+
+ ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
+
+ /* Loop over the child nodes and register a phy_device for each PHY */
+ fwnode_for_each_child_node(fwnode, child) {
+ ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+ if (ret || addr >= PHY_MAX_ADDR)
+ continue;
+
+ ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+ if (ret == -ENODEV)
+ dev_err(&mdio->dev,
+ "MDIO device at address %d is missing.\n",
+ addr);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);
diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
new file mode 100644
index 000000000000..748d261fe2f9
--- /dev/null
+++ b/include/linux/acpi_mdio.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helper for the MDIO (Ethernet PHY) API
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ /*
+ * Fall back to mdiobus_register() function to register a bus.
+ * This way, we don't have to keep compat bits around in drivers.
+ */
+
+ return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */
--
2.17.1

2021-02-18 05:42:07

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 13/15] net: phylink: introduce phylink_fwnode_phy_connect()

Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6:
- remove OF check for fixed-link

Changes in v5: None
Changes in v4:
- call phy_device_free() before returning

Changes in v3: None
Changes in v2: None

drivers/net/phy/phylink.c | 54 +++++++++++++++++++++++++++++++++++++++
include/linux/phylink.h | 3 +++
2 files changed, 57 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 053c92e02cd8..23753f92e0a6 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2015 Russell King
*/
+#include <linux/acpi.h>
#include <linux/ethtool.h>
#include <linux/export.h>
#include <linux/gpio/consumer.h>
@@ -1124,6 +1125,59 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
}
EXPORT_SYMBOL_GPL(phylink_of_phy_connect);

+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags)
+{
+ struct fwnode_handle *phy_fwnode;
+ struct phy_device *phy_dev;
+ int ret;
+
+ /* Fixed links and 802.3z are handled without needing a PHY */
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ phy_interface_mode_is_8023z(pl->link_interface)))
+ return 0;
+
+ phy_fwnode = fwnode_get_phy_node(fwnode);
+ if (IS_ERR(phy_fwnode)) {
+ if (pl->cfg_link_an_mode == MLO_AN_PHY)
+ return -ENODEV;
+ return 0;
+ }
+
+ phy_dev = fwnode_phy_find_device(phy_fwnode);
+ /* We're done with the phy_node handle */
+ fwnode_handle_put(phy_fwnode);
+ if (!phy_dev)
+ return -ENODEV;
+
+ ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+ pl->link_interface);
+ if (ret) {
+ phy_device_free(phy_dev);
+ return ret;
+ }
+
+ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ if (ret)
+ phy_detach(phy_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
/**
* phylink_disconnect_phy() - disconnect any PHY attached to the phylink
* instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d81a714cfbbd..75d4f99090fd 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -439,6 +439,9 @@ void phylink_destroy(struct phylink *);

int phylink_connect_phy(struct phylink *, struct phy_device *);
int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags);
void phylink_disconnect_phy(struct phylink *);

void phylink_mac_change(struct phylink *, bool up);
--
2.17.1

2021-02-18 05:43:58

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 14/15] net: phylink: Refactor phylink_of_phy_connect()

Refactor phylink_of_phy_connect() to use phylink_fwnode_phy_connect().

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

drivers/net/phy/phylink.c | 39 +--------------------------------------
1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 23753f92e0a6..ce7e918430c8 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1084,44 +1084,7 @@ EXPORT_SYMBOL_GPL(phylink_connect_phy);
int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
u32 flags)
{
- struct device_node *phy_node;
- struct phy_device *phy_dev;
- int ret;
-
- /* Fixed links and 802.3z are handled without needing a PHY */
- if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
- (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(pl->link_interface)))
- return 0;
-
- phy_node = of_parse_phandle(dn, "phy-handle", 0);
- if (!phy_node)
- phy_node = of_parse_phandle(dn, "phy", 0);
- if (!phy_node)
- phy_node = of_parse_phandle(dn, "phy-device", 0);
-
- if (!phy_node) {
- if (pl->cfg_link_an_mode == MLO_AN_PHY)
- return -ENODEV;
- return 0;
- }
-
- phy_dev = of_phy_find_device(phy_node);
- /* We're done with the phy_node handle */
- of_node_put(phy_node);
- if (!phy_dev)
- return -ENODEV;
-
- ret = phy_attach_direct(pl->netdev, phy_dev, flags,
- pl->link_interface);
- if (ret)
- return ret;
-
- ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
- if (ret)
- phy_detach(phy_dev);
-
- return ret;
+ return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
}
EXPORT_SYMBOL_GPL(phylink_of_phy_connect);

--
2.17.1

2021-02-18 05:44:59

by Calvin Johnson

[permalink] [raw]
Subject: [net-next PATCH v6 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.

Modify dpaa2_mac_get_if_mode() to get interface mode from dpmac_node
which is a fwnode.

Modify dpaa2_pcs_create() to create pcs from dpmac_node fwnode.

Modify dpaa2_mac_connect() to support ACPI along with DT.

Signed-off-by: Calvin Johnson <[email protected]>
---

Changes in v6:
- use dev_fwnode()
- remove useless else
- replace of_device_is_available() to fwnode_device_is_available()

Changes in v5:
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4: None
Changes in v3: None
Changes in v2:
- Refactor OF functions to use fwnode functions

.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 91 +++++++++++--------
1 file changed, 55 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ccaf7e35abeb..3e39a15b001f 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */

+#include <linux/acpi.h>
+#include <linux/property.h>
+
#include "dpaa2-eth.h"
#include "dpaa2-mac.h"

@@ -34,39 +37,53 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
return 0;
}

-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+ u16 dpmac_id)
{
- struct device_node *dpmacs, *dpmac = NULL;
- u32 id;
+ struct fwnode_handle *fwnode, *parent, *child = NULL;
+ struct device_node *dpmacs = NULL;
int err;
+ u32 id;

- dpmacs = of_find_node_by_name(NULL, "dpmacs");
- if (!dpmacs)
- return NULL;
+ fwnode = dev_fwnode(dev->parent);
+ if (is_of_node(fwnode)) {
+ dpmacs = of_find_node_by_name(NULL, "dpmacs");
+ if (!dpmacs)
+ return NULL;
+ parent = of_fwnode_handle(dpmacs);
+ } else if (is_acpi_node(fwnode)) {
+ parent = fwnode;
+ }

- while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
- err = of_property_read_u32(dpmac, "reg", &id);
+ fwnode_for_each_child_node(parent, child) {
+ err = -EINVAL;
+ if (is_acpi_device_node(child))
+ err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+ else if (is_of_node(child))
+ err = of_property_read_u32(to_of_node(child), "reg", &id);
if (err)
continue;
- if (id == dpmac_id)
- break;
- }

- of_node_put(dpmacs);
-
- return dpmac;
+ if (id == dpmac_id) {
+ if (is_of_node(fwnode))
+ of_node_put(dpmacs);
+ return child;
+ }
+ }
+ if (is_of_node(fwnode))
+ of_node_put(dpmacs);
+ return NULL;
}

-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
struct dpmac_attr attr)
{
phy_interface_t if_mode;
int err;

- err = of_get_phy_mode(node, &if_mode);
- if (!err)
- return if_mode;
+ err = fwnode_get_phy_mode(dpmac_node);
+ if (err > 0)
+ return err;

err = phy_mode(attr.eth_if, &if_mode);
if (!err)
@@ -235,26 +252,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
};

static int dpaa2_pcs_create(struct dpaa2_mac *mac,
- struct device_node *dpmac_node, int id)
+ struct fwnode_handle *dpmac_node,
+ int id)
{
struct mdio_device *mdiodev;
- struct device_node *node;
+ struct fwnode_handle *node;

- node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
- if (!node) {
+ node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+ if (IS_ERR(node)) {
/* do not error out on old DTS files */
netdev_warn(mac->net_dev, "pcs-handle node not found\n");
return 0;
}

- if (!of_device_is_available(node)) {
+ if (!fwnode_device_is_available(node)) {
netdev_err(mac->net_dev, "pcs-handle node not available\n");
- of_node_put(node);
+ fwnode_handle_put(node);
return -ENODEV;
}

- mdiodev = of_mdio_find_device(node);
- of_node_put(node);
+ mdiodev = fwnode_mdio_find_device(node);
+ fwnode_handle_put(node);
if (!mdiodev)
return -EPROBE_DEFER;

@@ -283,13 +301,12 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
int dpaa2_mac_connect(struct dpaa2_mac *mac)
{
struct net_device *net_dev = mac->net_dev;
- struct device_node *dpmac_node;
+ struct fwnode_handle *dpmac_node = NULL;
struct phylink *phylink;
int err;

mac->if_link_type = mac->attr.link_type;
-
- dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+ dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
if (!dpmac_node) {
netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
return -ENODEV;
@@ -306,7 +323,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
* error out if the interface mode requests them and there is no PHY
* to act upon them
*/
- if (of_phy_is_fixed_link(dpmac_node) &&
+ if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
(mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -327,7 +344,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
mac->phylink_config.type = PHYLINK_NETDEV;

phylink = phylink_create(&mac->phylink_config,
- of_fwnode_handle(dpmac_node), mac->if_mode,
+ dpmac_node, mac->if_mode,
&dpaa2_mac_phylink_ops);
if (IS_ERR(phylink)) {
err = PTR_ERR(phylink);
@@ -338,13 +355,14 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
if (mac->pcs)
phylink_set_pcs(mac->phylink, &mac->pcs->pcs);

- err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
if (err) {
- netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
goto err_phylink_destroy;
}

- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);

return 0;

@@ -353,7 +371,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
err_pcs_destroy:
dpaa2_pcs_destroy(mac);
err_put_node:
- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);

return err;
}
--
2.17.1

2021-02-18 17:40:59

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [net-next PATCH v6 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy()

On Thu, Feb 18, 2021 at 7:28 AM Calvin Johnson
<[email protected]> wrote:
>
> Introduce fwnode_mdiobus_register_phy() to register PHYs on the
> mdiobus. From the compatible string, identify whether the PHY is
> c45 and based on this create a PHY device instance which is
> registered on the mdiobus.

Thanks for an update!
Below some nit-picks, may be ignored.

> uninitialized symbol 'mii_ts'
> Reported-by: kernel test robot <[email protected]>
> Reported-by: Dan Carpenter <[email protected]>

I don't think the above deserves to be in the commit message (rather
after the cutter '---' line as a changelog).

> Signed-off-by: Calvin Johnson <[email protected]>

...

> + if (mii_ts)
> + unregister_mii_timestamper(mii_ts);

...

> + if (mii_ts)
> + unregister_mii_timestamper(mii_ts);

I'm wondering if we can move this check to the
unregister_mii_timestamper() to make it NULL aware as many other
similar (unregister) APIs do. I have checked that there are currently
three users of this that can benefit of the change.

...

> + /* phy->mii_ts may already be defined by the PHY driver. A
> + * mii_timestamper probed via the device tree will still have
> + * precedence.
> + */
> + if (mii_ts)
> + phy->mii_ts = mii_ts;

I'm wondering if the belo form is better to read

phy->mii_ts = mii_ts ?: phy->mii_ts;

--
With Best Regards,
Andy Shevchenko

2021-02-18 17:46:23

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [net-next PATCH v6 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

On Thu, Feb 18, 2021 at 7:29 AM Calvin Johnson
<[email protected]> wrote:
>
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> DT or ACPI.
>
> Modify dpaa2_mac_get_if_mode() to get interface mode from dpmac_node
> which is a fwnode.
>
> Modify dpaa2_pcs_create() to create pcs from dpmac_node fwnode.
>
> Modify dpaa2_mac_connect() to support ACPI along with DT.

...

> + if (is_of_node(fwnode))

Redundant check I think. If it's not an fwnode, the dpmacs is NULL and
of_node_put() is NULL-aware.

> + of_node_put(dpmacs);

...

> + if (is_of_node(fwnode))
> + of_node_put(dpmacs);

Ditto.

...

> mac->if_link_type = mac->attr.link_type;
> -

Do we need to remove this blank line?

...

> + if (is_of_node(dpmac_node))
> + fwnode_handle_put(dpmac_node);

> + if (is_of_node(dpmac_node))
> + fwnode_handle_put(dpmac_node);

Also not sure that you need a check in the above code excerpts.

--
With Best Regards,
Andy Shevchenko

2021-02-18 17:57:06

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

On Thu, Feb 18, 2021 at 7:28 AM Calvin Johnson
<[email protected]> wrote:
>
> Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> each ACPI child node.

> +#include <linux/acpi.h>
> +#include <linux/acpi_mdio.h>

Perhaps it's better to provide the headers that this file is direct
user of, i.e.
bits.h
dev_printk.h
module.h
types.h

The rest seems fine because they are guaranteed to be included by
acpi.h (IIUC about fwnode API and acpi_mdio includes MDIO PHY APIs).

--
With Best Regards,
Andy Shevchenko

2021-03-08 14:13:15

by Calvin Johnson

[permalink] [raw]
Subject: Re: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

On Thu, Feb 18, 2021 at 05:08:05PM +0200, Andy Shevchenko wrote:
> On Thu, Feb 18, 2021 at 7:28 AM Calvin Johnson
> <[email protected]> wrote:
> >
> > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> > each ACPI child node.
>
> > +#include <linux/acpi.h>
> > +#include <linux/acpi_mdio.h>
>
> Perhaps it's better to provide the headers that this file is direct
> user of, i.e.
> bits.h
> dev_printk.h

Looks like device.h needs to be used instead of dev_printk.h. Please
let me know if you've a different opinion.

> module.h
> types.h
>
> The rest seems fine because they are guaranteed to be included by
> acpi.h (IIUC about fwnode API and acpi_mdio includes MDIO PHY APIs).
>

Thanks
Calvin

2021-03-08 15:01:57

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

On Mon, Mar 8, 2021 at 4:11 PM Calvin Johnson
<[email protected]> wrote:
> On Thu, Feb 18, 2021 at 05:08:05PM +0200, Andy Shevchenko wrote:
> > On Thu, Feb 18, 2021 at 7:28 AM Calvin Johnson
> > <[email protected]> wrote:

> > > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> > > each ACPI child node.
> >
> > > +#include <linux/acpi.h>
> > > +#include <linux/acpi_mdio.h>
> >
> > Perhaps it's better to provide the headers that this file is direct
> > user of, i.e.
> > bits.h
> > dev_printk.h
>
> Looks like device.h needs to be used instead of dev_printk.h. Please
> let me know if you've a different opinion.

I don't see the user of device.h. dev_printk.h is definitely in use here...
Do you see a user for device.h? Which line in your code requires it?

It might be that I don't see something quite obvious...

> > module.h
> > types.h
> >
> > The rest seems fine because they are guaranteed to be included by
> > acpi.h (IIUC about fwnode API and acpi_mdio includes MDIO PHY APIs).



--
With Best Regards,
Andy Shevchenko

2021-03-08 16:30:43

by Calvin Johnson

[permalink] [raw]
Subject: Re: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

On Mon, Mar 08, 2021 at 04:57:35PM +0200, Andy Shevchenko wrote:
> On Mon, Mar 8, 2021 at 4:11 PM Calvin Johnson
> <[email protected]> wrote:
> > On Thu, Feb 18, 2021 at 05:08:05PM +0200, Andy Shevchenko wrote:
> > > On Thu, Feb 18, 2021 at 7:28 AM Calvin Johnson
> > > <[email protected]> wrote:
>
> > > > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> > > > each ACPI child node.
> > >
> > > > +#include <linux/acpi.h>
> > > > +#include <linux/acpi_mdio.h>
> > >
> > > Perhaps it's better to provide the headers that this file is direct
> > > user of, i.e.
> > > bits.h
> > > dev_printk.h
> >
> > Looks like device.h needs to be used instead of dev_printk.h. Please
> > let me know if you've a different opinion.
>
> I don't see the user of device.h. dev_printk.h is definitely in use here...
> Do you see a user for device.h? Which line in your code requires it?
>
> It might be that I don't see something quite obvious...

I thought of including device.h instead of dev_printk.h because, it is the
only file that includes dev_printk.h and device.h is widely used. Of course,
it will mean that dev_printk.h is indirectly called.

Regards
Calvin

2021-03-08 16:42:42

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [net-next PATCH v6 10/15] net: mdio: Add ACPI support code for mdio

On Mon, Mar 8, 2021 at 6:28 PM Calvin Johnson
<[email protected]> wrote:
> On Mon, Mar 08, 2021 at 04:57:35PM +0200, Andy Shevchenko wrote:

....

> I thought of including device.h instead of dev_printk.h because, it is the
> only file that includes dev_printk.h and device.h is widely used. Of course,
> it will mean that dev_printk.h is indirectly called.

The split happened recently, not every developer knows about it and
definitely most of the contributors are too lazy to properly write the
inclusion block in their code.

--
With Best Regards,
Andy Shevchenko