GPIO library uses of_node and fwnode in the core in non-unified way.
The series cleans this up and improves IRQ domain creation for non-OF cases
where currently the names of the domain are 'unknown'.
This has been tested on Intel Galileo Gen 2.
It touches GPIO core parts and it's expected that the series is routed via
GPIO tree.
In v6:
- added tag to the patch 5 (Rafael)
- dropped ops temporary variable (Rafael)
In v5:
- same as v4 + v3 (patches 1-4/5) in order to route via GPIO tree (Bart)
In v4:
- based on Rafael's bleeding-edge
- split the rest to two patches (Rafael)
- elaborate WARN() deduplication in the commit message (Rafael)
In v3:
- fixed subtle bug in gpiod_count
- made irq_domain_add_simple() static inline (Marc)
In v2:
- added a new patch due to functionality in irq_comain_add_simple() (Linus)
- tagged patches 2-4 (Linus)
- Cc'ed to Rafael
Andy Shevchenko (6):
irqdomain: Introduce irq_domain_create_simple() API
gpiolib: Unify the checks on fwnode type
gpiolib: Move of_node operations to gpiolib-of and correct fwnode use
gpiolib: Introduce acpi_gpio_dev_init() and call it from core
gpiolib: Reuse device's fwnode to create IRQ domain
gpiolib: Fold conditionals into a simple ternary operator
Documentation/core-api/irq/irq-domain.rst | 22 ++++----
drivers/gpio/gpiolib-acpi.c | 7 +++
drivers/gpio/gpiolib-acpi.h | 4 ++
drivers/gpio/gpiolib-of.c | 6 ++-
drivers/gpio/gpiolib.c | 62 +++++++++--------------
include/linux/irqdomain.h | 19 +++++--
kernel/irq/irqdomain.c | 20 ++++----
7 files changed, 75 insertions(+), 65 deletions(-)
--
2.30.1
The initial value of the OF node based on presence of parent, but
at the same time this operation somehow appeared separately from others
that handle the OF case. On the other hand there is no need to assign
dev->fwnode in the OF case if code properly retrieves fwnode, i.e.
via dev_fwnode() helper.
Amend gpiolib.c and gpiolib-of.c code in order to group OF operations.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
drivers/gpio/gpiolib-of.c | 6 ++++--
drivers/gpio/gpiolib.c | 9 ++++-----
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index baf0153b7bca..bbcc7c073f63 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -1042,11 +1042,13 @@ void of_gpiochip_remove(struct gpio_chip *chip)
void of_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev)
{
+ /* Set default OF node to parent's one if present */
+ if (gc->parent)
+ gdev->dev.of_node = gc->parent->of_node;
+
/* If the gpiochip has an assigned OF node this takes precedence */
if (gc->of_node)
gdev->dev.of_node = gc->of_node;
else
gc->of_node = gdev->dev.of_node;
- if (gdev->dev.of_node)
- gdev->dev.fwnode = of_fwnode_handle(gdev->dev.of_node);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1b3b0acdb803..41a57f042843 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -585,12 +585,9 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
if (!gdev)
return -ENOMEM;
gdev->dev.bus = &gpio_bus_type;
+ gdev->dev.parent = gc->parent;
gdev->chip = gc;
gc->gpiodev = gdev;
- if (gc->parent) {
- gdev->dev.parent = gc->parent;
- gdev->dev.of_node = gc->parent->of_node;
- }
of_gpio_dev_init(gc, gdev);
@@ -4211,11 +4208,13 @@ EXPORT_SYMBOL_GPL(gpiod_put_array);
static int gpio_bus_match(struct device *dev, struct device_driver *drv)
{
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+
/*
* Only match if the fwnode doesn't already have a proper struct device
* created for it.
*/
- if (dev->fwnode && dev->fwnode->dev != dev)
+ if (fwnode && fwnode->dev != dev)
return 0;
return 1;
}
--
2.30.1
In the ACPI case we may use the firmware node in the similar way
as it's done for OF case. We may use that fwnode for other purposes
in the future.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 7 +++++++
drivers/gpio/gpiolib-acpi.h | 4 ++++
drivers/gpio/gpiolib.c | 1 +
3 files changed, 12 insertions(+)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 1aacd2a5a1fd..21750be9c489 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1291,6 +1291,13 @@ void acpi_gpiochip_remove(struct gpio_chip *chip)
kfree(acpi_gpio);
}
+void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev)
+{
+ /* Set default fwnode to parent's one if present */
+ if (gc->parent)
+ ACPI_COMPANION_SET(&gdev->dev, ACPI_COMPANION(gc->parent));
+}
+
static int acpi_gpio_package_count(const union acpi_object *obj)
{
const union acpi_object *element = obj->package.elements;
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index e2edb632b2cc..e476558d9471 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -36,6 +36,8 @@ struct acpi_gpio_info {
void acpi_gpiochip_add(struct gpio_chip *chip);
void acpi_gpiochip_remove(struct gpio_chip *chip);
+void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev);
+
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
@@ -58,6 +60,8 @@ int acpi_gpio_count(struct device *dev, const char *con_id);
static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { }
+static inline void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev) { }
+
static inline void
acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 41a57f042843..1853075df741 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -590,6 +590,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
gc->gpiodev = gdev;
of_gpio_dev_init(gc, gdev);
+ acpi_gpio_dev_init(gc, gdev);
gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
if (gdev->id < 0) {
--
2.30.1
Linus Walleij pointed out that ird_domain_add_simple() gained
additional functionality and can't be anymore replaced with
a simple conditional. In preparation to upgrade GPIO library
to use fwnode, introduce irq_domain_create_simple() API which is
functional equivalent to the existing irq_domain_add_simple(),
but takes a pointer to the struct fwnode_handle as a parameter.
While at it, amend documentation to mention irq_domain_create_*()
functions where it makes sense.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
---
Documentation/core-api/irq/irq-domain.rst | 22 ++++++++++++----------
include/linux/irqdomain.h | 19 ++++++++++++++-----
kernel/irq/irqdomain.c | 20 ++++++++++----------
3 files changed, 36 insertions(+), 25 deletions(-)
diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst
index a77c24c27f7b..8214e215a8bf 100644
--- a/Documentation/core-api/irq/irq-domain.rst
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -42,10 +42,10 @@ irq_domain usage
================
An interrupt controller driver creates and registers an irq_domain by
-calling one of the irq_domain_add_*() functions (each mapping method
-has a different allocator function, more on that later). The function
-will return a pointer to the irq_domain on success. The caller must
-provide the allocator function with an irq_domain_ops structure.
+calling one of the irq_domain_add_*() or irq_domain_create_*() functions
+(each mapping method has a different allocator function, more on that later).
+The function will return a pointer to the irq_domain on success. The caller
+must provide the allocator function with an irq_domain_ops structure.
In most cases, the irq_domain will begin empty without any mappings
between hwirq and IRQ numbers. Mappings are added to the irq_domain
@@ -147,6 +147,7 @@ Legacy
irq_domain_add_simple()
irq_domain_add_legacy()
irq_domain_add_legacy_isa()
+ irq_domain_create_simple()
irq_domain_create_legacy()
The Legacy mapping is a special case for drivers that already have a
@@ -169,13 +170,13 @@ supported. For example, ISA controllers would use the legacy map for
mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
numbers.
-Most users of legacy mappings should use irq_domain_add_simple() which
-will use a legacy domain only if an IRQ range is supplied by the
-system and will otherwise use a linear domain mapping. The semantics
-of this call are such that if an IRQ range is specified then
+Most users of legacy mappings should use irq_domain_add_simple() or
+irq_domain_create_simple() which will use a legacy domain only if an IRQ range
+is supplied by the system and will otherwise use a linear domain mapping.
+The semantics of this call are such that if an IRQ range is specified then
descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which means
-*no* irq descriptors will be allocated.
+specified it will fall through to irq_domain_add_linear() or
+irq_domain_create_linear() which means *no* irq descriptors will be allocated.
A typical use case for simple domains is where an irqchip provider
is supporting both dynamic and static IRQ assignments.
@@ -186,6 +187,7 @@ that the driver using the simple domain call irq_create_mapping()
before any irq_find_mapping() since the latter will actually work
for the static IRQ assignment case.
+irq_domain_add_simple() and irq_domain_create_simple() as well as
irq_domain_add_legacy() and irq_domain_create_legacy() are functionally
equivalent, except for the first argument is different - the former
accepts an Open Firmware specific 'struct device_node', while the latter
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 42d196805f58..6e78f5909723 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -260,11 +260,11 @@ struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
irq_hw_number_t hwirq_max, int direct_max,
const struct irq_domain_ops *ops,
void *host_data);
-struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
- unsigned int size,
- unsigned int first_irq,
- const struct irq_domain_ops *ops,
- void *host_data);
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data);
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
@@ -329,6 +329,15 @@ static inline struct irq_domain *irq_find_host(struct device_node *node)
return d;
}
+static inline struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ return irq_domain_create_simple(of_node_to_fwnode(of_node), size, first_irq, ops, host_data);
+}
+
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 288151393a06..a7f4028971e4 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -295,8 +295,8 @@ void irq_domain_update_bus_token(struct irq_domain *domain,
EXPORT_SYMBOL_GPL(irq_domain_update_bus_token);
/**
- * irq_domain_add_simple() - Register an irq_domain and optionally map a range of irqs
- * @of_node: pointer to interrupt controller's device tree node.
+ * irq_domain_create_simple() - Register an irq_domain and optionally map a range of irqs
+ * @fwnode: firmware node for the interrupt controller
* @size: total number of irqs in mapping
* @first_irq: first number of irq block assigned to the domain,
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
@@ -312,15 +312,15 @@ EXPORT_SYMBOL_GPL(irq_domain_update_bus_token);
* irqs get mapped dynamically on the fly. However, if the controller requires
* static virq assignments (non-DT boot) then it will set that up correctly.
*/
-struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
- unsigned int size,
- unsigned int first_irq,
- const struct irq_domain_ops *ops,
- void *host_data)
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
struct irq_domain *domain;
- domain = __irq_domain_add(of_node_to_fwnode(of_node), size, size, 0, ops, host_data);
+ domain = __irq_domain_add(fwnode, size, size, 0, ops, host_data);
if (!domain)
return NULL;
@@ -328,7 +328,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
- of_node_to_nid(of_node));
+ of_node_to_nid(to_of_node(fwnode)));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
@@ -338,7 +338,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
return domain;
}
-EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+EXPORT_SYMBOL_GPL(irq_domain_create_simple);
/**
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
--
2.30.1
It's quite spread code to initialize IRQ domain options.
Let's fold it into a simple oneliner.
Signed-off-by: Andy Shevchenko <[email protected]>
---
drivers/gpio/gpiolib.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index afee48e7dd41..cee4333f8ac7 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1458,7 +1458,6 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
{
struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
struct irq_chip *irqchip = gc->irq.chip;
- const struct irq_domain_ops *ops = NULL;
unsigned int type;
unsigned int i;
@@ -1496,15 +1495,11 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return ret;
} else {
/* Some drivers provide custom irqdomain ops */
- if (gc->irq.domain_ops)
- ops = gc->irq.domain_ops;
-
- if (!ops)
- ops = &gpiochip_domain_ops;
gc->irq.domain = irq_domain_create_simple(fwnode,
gc->ngpio,
gc->irq.first,
- ops, gc);
+ gc->irq.domain_ops ?: &gpiochip_domain_ops,
+ gc);
if (!gc->irq.domain)
return -EINVAL;
}
--
2.30.1
When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d
since for now it utilizes of_node member only and doesn't consider fwnode case.
Convert IRQ domain creation code to utilize fwnode instead.
Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers:
unknown-1 ==> \_SB.PCI0.GIP0.GPO
unknown-2 ==> \_SB.NIO3
Due to the nature of this change we may also deduplicate the WARN():s
because in either case (DT or ACPI) the fwnode will be set correctly
and %pfw is an equivalent to what the current code prints as a prefix.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
---
drivers/gpio/gpiolib.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1853075df741..afee48e7dd41 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1456,9 +1456,9 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
struct lock_class_key *lock_key,
struct lock_class_key *request_key)
{
+ struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
struct irq_chip *irqchip = gc->irq.chip;
const struct irq_domain_ops *ops = NULL;
- struct device_node *np;
unsigned int type;
unsigned int i;
@@ -1470,7 +1470,6 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return -EINVAL;
}
- np = gc->gpiodev->dev.of_node;
type = gc->irq.default_type;
/*
@@ -1478,16 +1477,10 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
* used to configure the interrupts, as you may end up with
* conflicting triggers. Tell the user, and reset to NONE.
*/
- if (WARN(np && type != IRQ_TYPE_NONE,
- "%s: Ignoring %u default trigger\n", np->full_name, type))
+ if (WARN(fwnode && type != IRQ_TYPE_NONE,
+ "%pfw: Ignoring %u default trigger\n", fwnode, type))
type = IRQ_TYPE_NONE;
- if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
- acpi_handle_warn(ACPI_HANDLE(gc->parent),
- "Ignoring %u default trigger\n", type);
- type = IRQ_TYPE_NONE;
- }
-
if (gc->to_irq)
chip_warn(gc, "to_irq is redefined in %s and you shouldn't rely on it\n", __func__);
@@ -1508,7 +1501,7 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
if (!ops)
ops = &gpiochip_domain_ops;
- gc->irq.domain = irq_domain_add_simple(np,
+ gc->irq.domain = irq_domain_create_simple(fwnode,
gc->ngpio,
gc->irq.first,
ops, gc);
--
2.30.1
We have (historically) different approaches how we identify the type
of a given fwnode. Let's standardize them across the library code.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
drivers/gpio/gpiolib.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 7ec0822c0505..1b3b0acdb803 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3677,11 +3677,12 @@ EXPORT_SYMBOL_GPL(fwnode_gpiod_get_index);
*/
int gpiod_count(struct device *dev, const char *con_id)
{
+ const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
int count = -ENOENT;
- if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+ if (is_of_node(fwnode))
count = of_gpio_get_count(dev, con_id);
- else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
+ else if (is_acpi_node(fwnode))
count = acpi_gpio_count(dev, con_id);
if (count < 0)
@@ -3819,18 +3820,17 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
int ret;
/* Maybe we have a device name, maybe not */
const char *devname = dev ? dev_name(dev) : "?";
+ const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
- if (dev) {
- /* Using device tree? */
- if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
- dev_dbg(dev, "using device tree for GPIO lookup\n");
- desc = of_find_gpio(dev, con_id, idx, &lookupflags);
- } else if (ACPI_COMPANION(dev)) {
- dev_dbg(dev, "using ACPI for GPIO lookup\n");
- desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
- }
+ /* Using device tree? */
+ if (is_of_node(fwnode)) {
+ dev_dbg(dev, "using device tree for GPIO lookup\n");
+ desc = of_find_gpio(dev, con_id, idx, &lookupflags);
+ } else if (is_acpi_node(fwnode)) {
+ dev_dbg(dev, "using ACPI for GPIO lookup\n");
+ desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
}
/*
@@ -3914,9 +3914,6 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
struct gpio_desc *desc = ERR_PTR(-ENODEV);
int ret;
- if (!fwnode)
- return ERR_PTR(-EINVAL);
-
if (is_of_node(fwnode)) {
desc = gpiod_get_from_of_node(to_of_node(fwnode),
propname, index,
@@ -3932,7 +3929,8 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
acpi_gpio_update_gpiod_flags(&dflags, &info);
acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
- }
+ } else
+ return ERR_PTR(-EINVAL);
/* Currently only ACPI takes this path */
ret = gpiod_request(desc, label);
--
2.30.1
On Tue, Mar 9, 2021 at 10:37 AM Andy Shevchenko
<[email protected]> wrote:
>
> It's quite spread code to initialize IRQ domain options.
> Let's fold it into a simple oneliner.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
> ---
> drivers/gpio/gpiolib.c | 9 ++-------
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index afee48e7dd41..cee4333f8ac7 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1458,7 +1458,6 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
> {
> struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
> struct irq_chip *irqchip = gc->irq.chip;
> - const struct irq_domain_ops *ops = NULL;
> unsigned int type;
> unsigned int i;
>
> @@ -1496,15 +1495,11 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
> return ret;
> } else {
> /* Some drivers provide custom irqdomain ops */
> - if (gc->irq.domain_ops)
> - ops = gc->irq.domain_ops;
> -
> - if (!ops)
> - ops = &gpiochip_domain_ops;
> gc->irq.domain = irq_domain_create_simple(fwnode,
> gc->ngpio,
> gc->irq.first,
> - ops, gc);
> + gc->irq.domain_ops ?: &gpiochip_domain_ops,
> + gc);
> if (!gc->irq.domain)
> return -EINVAL;
> }
> --
> 2.30.1
>
On Tue, Mar 9, 2021 at 10:37 AM Andy Shevchenko
<[email protected]> wrote:
> It's quite spread code to initialize IRQ domain options.
> Let's fold it into a simple oneliner.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
Definitely due to my coding style. (Not so fond of the ternary operator.)
Allright, it is so much more compact.
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Tue, Mar 9, 2021 at 10:37 AM Andy Shevchenko
<[email protected]> wrote:
>
> GPIO library uses of_node and fwnode in the core in non-unified way.
> The series cleans this up and improves IRQ domain creation for non-OF cases
> where currently the names of the domain are 'unknown'.
>
> This has been tested on Intel Galileo Gen 2.
>
> It touches GPIO core parts and it's expected that the series is routed via
> GPIO tree.
>
> In v6:
> - added tag to the patch 5 (Rafael)
> - dropped ops temporary variable (Rafael)
>
> In v5:
> - same as v4 + v3 (patches 1-4/5) in order to route via GPIO tree (Bart)
>
> In v4:
> - based on Rafael's bleeding-edge
> - split the rest to two patches (Rafael)
> - elaborate WARN() deduplication in the commit message (Rafael)
>
> In v3:
> - fixed subtle bug in gpiod_count
> - made irq_domain_add_simple() static inline (Marc)
>
> In v2:
> - added a new patch due to functionality in irq_comain_add_simple() (Linus)
> - tagged patches 2-4 (Linus)
> - Cc'ed to Rafael
>
> Andy Shevchenko (6):
> irqdomain: Introduce irq_domain_create_simple() API
> gpiolib: Unify the checks on fwnode type
> gpiolib: Move of_node operations to gpiolib-of and correct fwnode use
> gpiolib: Introduce acpi_gpio_dev_init() and call it from core
> gpiolib: Reuse device's fwnode to create IRQ domain
> gpiolib: Fold conditionals into a simple ternary operator
>
> Documentation/core-api/irq/irq-domain.rst | 22 ++++----
> drivers/gpio/gpiolib-acpi.c | 7 +++
> drivers/gpio/gpiolib-acpi.h | 4 ++
> drivers/gpio/gpiolib-of.c | 6 ++-
> drivers/gpio/gpiolib.c | 62 +++++++++--------------
> include/linux/irqdomain.h | 19 +++++--
> kernel/irq/irqdomain.c | 20 ++++----
> 7 files changed, 75 insertions(+), 65 deletions(-)
>
> --
> 2.30.1
>
Series applied, thanks!
Bartosz