The purpose of this series is to improve and enhance the
handling of kernel boot arguments.
Current situation is that most if not all architectures are using
similar options to do some manupulation on command line arguments:
- Prepend built-in arguments in front of bootloader provided arguments
- Append built-in arguments after bootloader provided arguments
- Replace bootloader provided arguments by built-in arguments
- Use built-in arguments when none is provided by bootloader.
On some architectures, all the options are possible. On other ones,
only a subset are available.
The purpose of this series is to refactor and enhance the
handling of kernel boot arguments so that every architecture can
benefit from all possibilities.
It is first focussed on powerpc but also extends the capability
for other arches.
The work has been focussed on minimising the churn in architectures
by keeping the most commonly used namings.
Main changes in V4:
- Included patch from Daniel to replace powerpc's strcpy() by strlcpy()
- Using strlcpy() instead of zeroing first char + strlcat() (idea taken frm Daniel's series)
- Reworked the convertion of EFI which was wrong in V3
- Added "too long" command line handling
- Changed cmdline macro into a function
- Done a few fixes in arch (NIOS2, SH, ARM)
- Taken comments into account (see individual responses for details)
- Tested on powerpc, build tested on ARM64, X86_64.
Main changes in V3:
- Also accept destination equal to source in cmdline_build() by setting a tmp buffer in __initdata. Powerpc provides different source and destination and call __cmdline_build() directly.
- Taken comments received from Will and Rob
- Converted all architectures (Only tested on powerpc)
Christophe Leroy (19):
cmdline: Add generic function to build command line.
drivers: of: use cmdline building function
x86/efi: Replace CONFIG_CMDLINE_OVERRIDE by CONFIG_CMDLINE_FORCE
drivers: firmware: efi: use cmdline building function
cmdline: Gives architectures opportunity to use generically defined
boot cmdline manipulation
powerpc: Convert to GENERIC_CMDLINE
arm: Convert to GENERIC_CMDLINE
arm64: Convert to GENERIC_CMDLINE
hexagon: Convert to GENERIC_CMDLINE
microblaze: Convert to GENERIC_CMDLINE
nios2: Convert to GENERIC_CMDLINE
openrisc: Convert to GENERIC_CMDLINE
riscv: Convert to GENERIC_CMDLINE
sh: Convert to GENERIC_CMDLINE
sparc: Convert to GENERIC_CMDLINE
xtensa: Convert to GENERIC_CMDLINE
x86: Convert to GENERIC_CMDLINE
mips: Convert to GENERIC_CMDLINE
cmdline: Remove CONFIG_CMDLINE_EXTEND
Daniel Walker (1):
powerpc: convert strcpy to strlcpy in prom_init
arch/arm/Kconfig | 38 +--------
arch/arm/kernel/atags_parse.c | 13 +--
arch/arm64/Kconfig | 33 +-------
arch/arm64/kernel/idreg-override.c | 9 +--
arch/hexagon/Kconfig | 11 +--
arch/hexagon/kernel/setup.c | 10 +--
arch/microblaze/Kconfig | 24 +-----
arch/microblaze/configs/mmu_defconfig | 2 +-
arch/microblaze/kernel/head.S | 4 +-
arch/mips/Kconfig | 1 +
arch/mips/Kconfig.debug | 44 -----------
arch/mips/configs/ar7_defconfig | 1 -
arch/mips/configs/bcm47xx_defconfig | 1 -
arch/mips/configs/bcm63xx_defconfig | 1 -
arch/mips/configs/bmips_be_defconfig | 1 -
arch/mips/configs/bmips_stb_defconfig | 1 -
arch/mips/configs/capcella_defconfig | 1 -
arch/mips/configs/ci20_defconfig | 1 -
arch/mips/configs/cu1000-neo_defconfig | 1 -
arch/mips/configs/cu1830-neo_defconfig | 1 -
arch/mips/configs/e55_defconfig | 1 -
arch/mips/configs/generic_defconfig | 1 -
arch/mips/configs/gpr_defconfig | 1 -
arch/mips/configs/loongson3_defconfig | 1 -
arch/mips/configs/mpc30x_defconfig | 1 -
arch/mips/configs/rt305x_defconfig | 1 -
arch/mips/configs/tb0219_defconfig | 1 -
arch/mips/configs/tb0226_defconfig | 1 -
arch/mips/configs/tb0287_defconfig | 1 -
arch/mips/configs/workpad_defconfig | 1 -
arch/mips/configs/xway_defconfig | 1 -
arch/mips/kernel/relocate.c | 4 +-
arch/mips/kernel/setup.c | 40 +---------
arch/mips/pic32/pic32mzda/early_console.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 -
arch/nios2/Kconfig | 25 +-----
arch/nios2/kernel/setup.c | 13 +--
arch/openrisc/Kconfig | 10 +--
arch/powerpc/Kconfig | 37 +--------
arch/powerpc/kernel/prom_init.c | 46 ++++++-----
arch/riscv/Kconfig | 44 +----------
arch/riscv/kernel/setup.c | 7 +-
arch/sh/Kconfig | 28 +------
arch/sh/configs/ap325rxa_defconfig | 2 +-
arch/sh/configs/dreamcast_defconfig | 2 +-
arch/sh/configs/ecovec24-romimage_defconfig | 2 +-
arch/sh/configs/ecovec24_defconfig | 2 +-
arch/sh/configs/edosk7760_defconfig | 2 +-
arch/sh/configs/espt_defconfig | 2 +-
arch/sh/configs/j2_defconfig | 2 +-
arch/sh/configs/kfr2r09-romimage_defconfig | 2 +-
arch/sh/configs/kfr2r09_defconfig | 2 +-
arch/sh/configs/lboxre2_defconfig | 2 +-
arch/sh/configs/microdev_defconfig | 2 +-
arch/sh/configs/migor_defconfig | 2 +-
arch/sh/configs/polaris_defconfig | 2 +-
arch/sh/configs/r7780mp_defconfig | 2 +-
arch/sh/configs/r7785rp_defconfig | 2 +-
arch/sh/configs/rsk7201_defconfig | 2 +-
arch/sh/configs/rsk7203_defconfig | 2 +-
arch/sh/configs/rts7751r2d1_defconfig | 2 +-
arch/sh/configs/rts7751r2dplus_defconfig | 2 +-
arch/sh/configs/sdk7780_defconfig | 2 +-
arch/sh/configs/sdk7786_defconfig | 2 +-
arch/sh/configs/se7206_defconfig | 2 +-
arch/sh/configs/se7343_defconfig | 2 +-
arch/sh/configs/se7712_defconfig | 2 +-
arch/sh/configs/se7721_defconfig | 2 +-
arch/sh/configs/se7724_defconfig | 2 +-
arch/sh/configs/se7751_defconfig | 2 +-
arch/sh/configs/se7780_defconfig | 2 +-
arch/sh/configs/sh03_defconfig | 2 +-
arch/sh/configs/sh2007_defconfig | 2 +-
arch/sh/configs/sh7757lcr_defconfig | 2 +-
arch/sh/configs/sh7763rdp_defconfig | 2 +-
arch/sh/configs/shmin_defconfig | 2 +-
arch/sh/configs/shx3_defconfig | 2 +-
arch/sh/configs/titan_defconfig | 2 +-
arch/sh/configs/ul2_defconfig | 2 +-
arch/sh/kernel/setup.c | 11 +--
arch/sparc/Kconfig | 18 +----
arch/sparc/prom/bootstr_64.c | 2 +-
arch/x86/Kconfig | 45 +----------
arch/x86/kernel/setup.c | 17 +---
arch/xtensa/Kconfig | 15 +---
arch/xtensa/configs/audio_kc705_defconfig | 1 -
arch/xtensa/configs/common_defconfig | 1 -
arch/xtensa/configs/generic_kc705_defconfig | 1 -
arch/xtensa/configs/iss_defconfig | 1 -
arch/xtensa/configs/nommu_kc705_defconfig | 1 -
arch/xtensa/configs/smp_lx200_defconfig | 1 -
arch/xtensa/configs/virt_defconfig | 1 -
arch/xtensa/configs/xip_kc705_defconfig | 1 -
arch/xtensa/kernel/setup.c | 10 +--
.../firmware/efi/libstub/efi-stub-helper.c | 35 ++++----
drivers/firmware/efi/libstub/efi-stub.c | 23 ++----
drivers/firmware/efi/libstub/efistub.h | 2 +-
drivers/firmware/efi/libstub/x86-stub.c | 18 +----
drivers/of/fdt.c | 23 +-----
include/linux/cmdline.h | 79 +++++++++++++++++++
init/Kconfig | 46 +++++++++++
usr/Kconfig | 2 +-
102 files changed, 265 insertions(+), 628 deletions(-)
create mode 100644 include/linux/cmdline.h
--
2.25.0
This code provides architectures with a way to build command line
based on what is built in the kernel and what is handed over by the
bootloader, based on selected compile-time options.
Signed-off-by: Christophe Leroy <[email protected]>
---
v3:
- Addressed comments from Will
- Added capability to have src == dst
v4:
- Add cmdline_strlcpy()
- Removed cmdline_build() macro, __cmdline_build() becomes cmdline_build()
- Fixed the destination length to COMMAND_LINE_SIZE
- Truncate at a space not in a quote when too long
- Added a message when forcing the command line
---
include/linux/cmdline.h | 79 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 include/linux/cmdline.h
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
new file mode 100644
index 000000000000..a0773dc365c7
--- /dev/null
+++ b/include/linux/cmdline.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_CMDLINE_H
+#define _LINUX_CMDLINE_H
+
+#include <linux/string.h>
+#include <linux/printk.h>
+#include <asm/setup.h>
+
+/* Allow users to override strlcat/strlcpy, powerpc can't use strings so early*/
+#ifndef cmdline_strlcat
+#define cmdline_strlcat strlcat
+#define cmdline_strlcpy strlcpy
+#endif
+
+/*
+ * This function will append or prepend a builtin command line to the command
+ * line provided by the bootloader. Kconfig options can be used to alter
+ * the behavior of this builtin command line.
+ * @dst: The destination of the final command line (Min. size COMMAND_LINE_SIZE)
+ * @src: The starting string or NULL if there isn't one. Must not equal dst.
+ * Returns: false if the string was truncated, true otherwise
+ */
+static __always_inline bool __cmdline_build(char *dst, const char *src)
+{
+ int len;
+ char *ptr, *last_space;
+ bool in_quote = false;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_FORCE))
+ src = NULL;
+
+ dst[0] = 0;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_PREPEND))
+ len = cmdline_strlcat(dst, CONFIG_CMDLINE " ", COMMAND_LINE_SIZE);
+
+ len = cmdline_strlcat(dst, src, COMMAND_LINE_SIZE);
+
+ if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ len = cmdline_strlcat(dst, " " CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+
+ if (len < COMMAND_LINE_SIZE - 1)
+ return true;
+
+ for (ptr = dst; *ptr; ptr++) {
+ if (*ptr == '"')
+ in_quote = !in_quote;
+ if (*ptr == ' ' && !in_quote)
+ last_space = ptr;
+ }
+ if (last_space)
+ *last_space = 0;
+
+ return false;
+}
+
+/*
+ * This function will append or prepend a builtin command line to the command
+ * line provided by the bootloader. Kconfig options can be used to alter
+ * the behavior of this builtin command line.
+ * @dst: The destination of the final command line (Min. size COMMAND_LINE_SIZE)
+ * @src: The starting string or NULL if there isn't one.
+ */
+static __always_inline void cmdline_build(char *dst, const char *src)
+{
+ static char tmp[COMMAND_LINE_SIZE] __initdata;
+
+ if (src == dst) {
+ cmdline_strlcpy(tmp, src, COMMAND_LINE_SIZE);
+ src = tmp;
+ }
+ if (!__cmdline_build(dst, src))
+ pr_warn("Command line is too long, it has been truncated\n");
+
+ if (IS_ENABLED(CONFIG_CMDLINE_FORCE))
+ pr_info("Forcing kernel command line to: %s\n", dst);
+}
+
+#endif /* _LINUX_CMDLINE_H */
--
2.25.0
This patch uses the new cmdline building function to
concatenate the of provided cmdline with built-in parts
based on compile-time options.
Signed-off-by: Christophe Leroy <[email protected]>
---
drivers/of/fdt.c | 23 ++++-------------------
1 file changed, 4 insertions(+), 19 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index dcc1dd96911a..7c5e9fb6039b 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -25,6 +25,7 @@
#include <linux/serial_core.h>
#include <linux/sysfs.h>
#include <linux/random.h>
+#include <linux/cmdline.h>
#include <asm/setup.h> /* for COMMAND_LINE_SIZE */
#include <asm/page.h>
@@ -1050,26 +1051,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+ if (l <= 0)
+ p = NULL;
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
- * managed to set the command line, unless CONFIG_CMDLINE_FORCE
- * is set in which case we override whatever was found earlier.
- */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
- strlcat(data, " ", COMMAND_LINE_SIZE);
- strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
- strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
- /* No arguments from boot loader, use kernel's cmdl*/
- if (!((char *)data)[0])
- strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
+ cmdline_build(data, p);
pr_debug("Command line is: %s\n", (char *)data);
--
2.25.0
Use cmdline building function in EFI.
EFI cannot use pr_err() and doesn't have a .init.data section,
so use the __cmdline_build() internal function and provides
both a source and a destination.
Remove the handling of too long command lines as it is handled
by the generic CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4: New
---
.../firmware/efi/libstub/efi-stub-helper.c | 35 ++++++++++---------
drivers/firmware/efi/libstub/efi-stub.c | 23 +++---------
drivers/firmware/efi/libstub/efistub.h | 2 +-
drivers/firmware/efi/libstub/x86-stub.c | 18 +++-------
4 files changed, 29 insertions(+), 49 deletions(-)
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index aa8da0a49829..9f60d471d650 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -13,6 +13,7 @@
#include <linux/efi.h>
#include <linux/kernel.h>
#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <linux/cmdline.h>
#include <asm/efi.h>
#include <asm/setup.h>
@@ -339,13 +340,13 @@ void efi_apply_loadoptions_quirk(const void **load_options, int *load_options_si
* Size of memory allocated return in *cmd_line_len.
* Returns NULL on error.
*/
-char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len)
+char *efi_convert_cmdline(efi_loaded_image_t *image)
{
const u16 *s2;
- unsigned long cmdline_addr = 0;
+ unsigned long cmdline_addr = 0, options_addr = 0;
int options_chars = efi_table_attr(image, load_options_size);
const u16 *options = efi_table_attr(image, load_options);
- int options_bytes = 0, safe_options_bytes = 0; /* UTF-8 bytes */
+ int options_bytes = 0; /* UTF-8 bytes */
bool in_quote = false;
efi_status_t status;
@@ -354,16 +355,12 @@ char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len)
if (options) {
s2 = options;
- while (options_bytes < COMMAND_LINE_SIZE && options_chars--) {
+ while (options_chars--) {
u16 c = *s2++;
if (c < 0x80) {
if (c == L'\0' || c == L'\n')
break;
- if (c == L'"')
- in_quote = !in_quote;
- else if (!in_quote && isspace((char)c))
- safe_options_bytes = options_bytes;
options_bytes++;
continue;
@@ -395,24 +392,30 @@ char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len)
}
}
}
- if (options_bytes >= COMMAND_LINE_SIZE) {
- options_bytes = safe_options_bytes;
- efi_err("Command line is too long: truncated to %d bytes\n",
- options_bytes);
- }
}
options_bytes++; /* NUL termination */
status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, options_bytes,
- (void **)&cmdline_addr);
+ (void **)&options_addr);
if (status != EFI_SUCCESS)
return NULL;
- snprintf((char *)cmdline_addr, options_bytes, "%.*ls",
+ snprintf((char *)options_addr, options_bytes, "%.*ls",
options_bytes - 1, options);
- *cmd_line_len = options_bytes;
+ status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, COMMAND_LINE_SIZE,
+ (void **)&cmdline_addr);
+ if (status != EFI_SUCCESS) {
+ efi_bs_call(free_pool, (void *)options_addr);
+ return NULL;
+ }
+
+ if (!__cmdline_build((char *)cmdline_addr, (char *)options_addr))
+ efi_err("Command line is too long\n");
+
+ efi_bs_call(free_pool, (void *)cmdline_addr);
+
return (char *)cmdline_addr;
}
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 26e69788f27a..b79ee76f2e95 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -127,7 +127,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
unsigned long fdt_addr = 0; /* Original DTB */
unsigned long fdt_size = 0;
char *cmdline_ptr = NULL;
- int cmdline_size = 0;
efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
unsigned long reserve_addr = 0;
unsigned long reserve_size = 0;
@@ -165,29 +164,17 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
* protocol. We are going to copy the command line into the
* device tree, so this can be allocated anywhere.
*/
- cmdline_ptr = efi_convert_cmdline(image, &cmdline_size);
+ cmdline_ptr = efi_convert_cmdline(image);
if (!cmdline_ptr) {
efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n");
status = EFI_OUT_OF_RESOURCES;
goto fail;
}
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
- IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
- cmdline_size == 0) {
- status = efi_parse_options(CONFIG_CMDLINE);
- if (status != EFI_SUCCESS) {
- efi_err("Failed to parse options\n");
- goto fail_free_cmdline;
- }
- }
-
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0) {
- status = efi_parse_options(cmdline_ptr);
- if (status != EFI_SUCCESS) {
- efi_err("Failed to parse options\n");
- goto fail_free_cmdline;
- }
+ status = efi_parse_options(cmdline_ptr);
+ if (status != EFI_SUCCESS) {
+ efi_err("Failed to parse options\n");
+ goto fail_free_cmdline;
}
efi_info("Booting Linux Kernel...\n");
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cde0a2ef507d..2f872c48b20b 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -780,7 +780,7 @@ void efi_free(unsigned long size, unsigned long addr);
void efi_apply_loadoptions_quirk(const void **load_options, int *load_options_size);
-char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len);
+char *efi_convert_cmdline(efi_loaded_image_t *image);
efi_status_t efi_get_memory_map(struct efi_boot_memmap *map);
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 28659276b6ba..0f6a33149ef7 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -359,7 +359,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
struct setup_header *hdr;
void *image_base;
efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
- int options_size = 0;
efi_status_t status;
char *cmdline_ptr;
@@ -404,7 +403,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
hdr->type_of_loader = 0x21;
/* Convert unicode cmdline to ascii */
- cmdline_ptr = efi_convert_cmdline(image, &options_size);
+ cmdline_ptr = efi_convert_cmdline(image);
if (!cmdline_ptr)
goto fail;
@@ -674,6 +673,8 @@ unsigned long efi_main(efi_handle_t handle,
unsigned long buffer_start, buffer_end;
struct setup_header *hdr = &boot_params->hdr;
efi_status_t status;
+ unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+ ((u64)boot_params->ext_cmd_line_ptr << 32));
efi_system_table = sys_table_arg;
@@ -735,22 +736,11 @@ unsigned long efi_main(efi_handle_t handle,
image_offset = 0;
}
-#ifdef CONFIG_CMDLINE_BOOL
- status = efi_parse_options(CONFIG_CMDLINE);
+ status = efi_parse_options((char *)cmdline_paddr);
if (status != EFI_SUCCESS) {
efi_err("Failed to parse options\n");
goto fail;
}
-#endif
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
- unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
- ((u64)boot_params->ext_cmd_line_ptr << 32));
- status = efi_parse_options((char *)cmdline_paddr);
- if (status != EFI_SUCCESS) {
- efi_err("Failed to parse options\n");
- goto fail;
- }
- }
/*
* At this point, an initrd may already have been loaded by the
--
2.25.0
During boot, x86 uses EFI driver. That driver is also used
by ARM.
In order to refactor the command line processing in that driver
in a following patch, rename CONFIG_CMDLINE_OVERRIDE by
CONFIG_CMDLINE_FORCE on the x86 in order to be similar
to ARM (and most other architectures).
Signed-off-by: Christophe Leroy <[email protected]>
---
v4: New
---
arch/x86/Kconfig | 4 ++--
arch/x86/kernel/setup.c | 2 +-
drivers/firmware/efi/libstub/x86-stub.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2792879d398e..a20684d56b4b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2384,14 +2384,14 @@ config CMDLINE
command line at boot time, it is appended to this string to
form the full kernel command line, when the system boots.
- However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ However, you can use the CONFIG_CMDLINE_FORCE option to
change this behavior.
In most cases, the command line (whether built-in or provided
by the boot loader) should specify the device for the root
file system.
-config CMDLINE_OVERRIDE
+config CMDLINE_FORCE
bool "Built-in command line overrides boot loader arguments"
depends on CMDLINE_BOOL && CMDLINE != ""
help
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d883176ef2ce..6f2de58eeb54 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -884,7 +884,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.end = __pa_symbol(__bss_stop)-1;
#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#ifdef CONFIG_CMDLINE_FORCE
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else
if (builtin_cmdline[0]) {
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..28659276b6ba 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -742,7 +742,7 @@ unsigned long efi_main(efi_handle_t handle,
goto fail;
}
#endif
- if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
+ if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
((u64)boot_params->ext_cmd_line_ptr << 32));
status = efi_parse_options((char *)cmdline_paddr);
--
2.25.0
From: Daniel Walker <[email protected]>
There's only two users of strcpy and one is the command
line handling. The generic command line handling uses strlcpy
and it makes sense to convert this one other user to strlcpy to
keep prom_init size consistent.
Cc: [email protected]
Signed-off-by: Daniel Walker <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/kernel/prom_init.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 41ed7e33d897..33316ee55265 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -242,15 +242,6 @@ static int __init prom_strcmp(const char *cs, const char *ct)
return 0;
}
-static char __init *prom_strcpy(char *dest, const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-
static int __init prom_strncmp(const char *cs, const char *ct, size_t count)
{
unsigned char c1, c2;
@@ -276,6 +267,20 @@ static size_t __init prom_strlen(const char *s)
return sc - s;
}
+static size_t __init prom_strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = prom_strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+
+
static int __init prom_memcmp(const void *cs, const void *ct, size_t count)
{
const unsigned char *su1, *su2;
@@ -2702,7 +2707,7 @@ static void __init flatten_device_tree(void)
/* Add "phandle" in there, we'll need it */
namep = make_room(&mem_start, &mem_end, 16, 1);
- prom_strcpy(namep, "phandle");
+ prom_strlcpy(namep, "phandle", 8);
mem_start = (unsigned long)namep + prom_strlen(namep) + 1;
/* Build string array */
--
2.25.0
This updates the powerpc code to use the new cmdline building function.
The cmdline_build() defines a temporary string in __initdata.
powerpc uses __prombss instead at the moment, so we must
call cmdline_build() with destination different from the source
to allow GCC to optimise the temporary string out.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4:
- Use cmdline_build() instead of __cmdline_build()
- Add cmdline_strlcpy() define
---
arch/powerpc/Kconfig | 37 +--------------------------------
arch/powerpc/kernel/prom_init.c | 21 +++++++++----------
2 files changed, 11 insertions(+), 47 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c1344c05226c..6723f10ac246 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -168,6 +168,7 @@ config PPC
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
@@ -888,42 +889,6 @@ config PPC_DENORMALISATION
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
-config CMDLINE
- string "Initial kernel command string"
- default ""
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided by the boot loader will be
- appended to the default kernel command string.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EXTRA_TARGETS
string "Additional default image types"
help
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 33316ee55265..704afd028213 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -152,7 +152,7 @@ static struct prom_t __prombss prom;
static unsigned long __prombss prom_entry;
static char __prombss of_stdout_device[256];
-static char __prombss prom_scratch[256];
+static char __prombss prom_scratch[COMMAND_LINE_SIZE];
static unsigned long __prombss dt_header_start;
static unsigned long __prombss dt_struct_start, dt_struct_end;
@@ -770,24 +770,23 @@ static unsigned long prom_memparse(const char *ptr, const char **retptr)
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
*/
+#define cmdline_strlcat prom_strlcat
+#define cmdline_strlcpy prom_strlcpy
+#include <linux/cmdline.h>
+
static void __init early_cmdline_parse(void)
{
const char *opt;
-
- char *p;
int l = 0;
-
- prom_cmd_line[0] = 0;
- p = prom_cmd_line;
+ bool truncated;
if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0)
- l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
+ l = prom_getprop(prom.chosen, "bootargs", prom_scratch,
+ COMMAND_LINE_SIZE - 1);
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0')
- prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE,
- sizeof(prom_cmd_line));
+ truncated = !__cmdline_build(prom_cmd_line, l > 0 ? prom_scratch : NULL);
- prom_printf("command line: %s\n", prom_cmd_line);
+ prom_printf("command line: %s %s\n", prom_cmd_line, truncated ? "[truncated]" : "");
#ifdef CONFIG_PPC64
opt = prom_strstr(prom_cmd_line, "iommu=");
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4:
- Removed dependency to ATAGS
- Removed the message when forcing
---
arch/arm/Kconfig | 38 +----------------------------------
arch/arm/kernel/atags_parse.c | 13 +++---------
2 files changed, 4 insertions(+), 47 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5da96f5df48f..1a1808b0eef7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -50,6 +50,7 @@ config ARM
select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CMDLINE
select GENERIC_IRQ_IPI if SMP
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
@@ -1740,43 +1741,6 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
endchoice
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some architectures (e.g. CATS), there is currently no way
- for the boot loader to pass arguments to the kernel. For these
- architectures, you should supply some command-line options at build
- time by entering them here. As a minimum, you should specify the
- memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
- depends on ATAGS
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided by the boot loader will be
- appended to the default kernel command string.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-endchoice
-
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 373b61f9a4f0..ef97ec015c51 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -14,6 +14,7 @@
* is not parsed in any way).
*/
+#include <linux/cmdline.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/kernel.h>
@@ -120,16 +121,8 @@ __tagtable(ATAG_REVISION, parse_tag_revision);
static int __init parse_tag_cmdline(const struct tag *tag)
{
-#if defined(CONFIG_CMDLINE_EXTEND)
- strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
- strlcat(default_command_line, tag->u.cmdline.cmdline,
- COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
- pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
-#else
- strlcpy(default_command_line, tag->u.cmdline.cmdline,
- COMMAND_LINE_SIZE);
-#endif
+ cmdline_build(default_command_line, tag->u.cmdline.cmdline);
+
return 0;
}
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4: Remove the message when forcing
---
arch/riscv/Kconfig | 44 +--------------------------------------
arch/riscv/kernel/setup.c | 7 +++----
2 files changed, 4 insertions(+), 47 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 87d7b52f278f..3dbd50bed037 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -39,6 +39,7 @@ config RISCV
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
@@ -390,49 +391,6 @@ endmenu
menu "Boot options"
-config CMDLINE
- string "Built-in kernel command line"
- help
- For most platforms, the arguments for the kernel's command line
- are provided at run-time, during boot. However, there are cases
- where either no arguments are being provided or the provided
- arguments are insufficient or even invalid.
-
- When that occurs, it is possible to define a built-in command
- line here and choose how the kernel should use it later on.
-
-choice
- prompt "Built-in command line usage" if CMDLINE != ""
- default CMDLINE_FALLBACK
- help
- Choose how the kernel will handle the provided built-in command
- line.
-
-config CMDLINE_FALLBACK
- bool "Use bootloader kernel arguments if available"
- help
- Use the built-in command line as fallback in case we get nothing
- during boot. This is the default behaviour.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided during boot will be
- appended to the built-in command line. This is useful in
- cases where the provided arguments are insufficient and
- you don't want to or cannot modify them.
-
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the built-in command line, even if we get one during
- boot. This is useful in case you need to override the provided
- command line on systems where you don't have or want control
- over it.
-
-endchoice
-
config EFI_STUB
bool
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f8f15332caa2..d4f16a9c1762 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/swiotlb.h>
#include <linux/smp.h>
#include <linux/efi.h>
+#include <linux/cmdline.h>
#include <asm/cpu_ops.h>
#include <asm/early_ioremap.h>
@@ -228,10 +229,8 @@ static void __init parse_dtb(void)
}
pr_err("No DTB passed to the kernel\n");
-#ifdef CONFIG_CMDLINE_FORCE
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
- pr_info("Forcing kernel command line to: %s\n", boot_command_line);
-#endif
+
+ cmdline_build(boot_command_line, NULL);
}
void __init setup_arch(char **cmdline_p)
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/mips/Kconfig | 1 +
arch/mips/Kconfig.debug | 44 -----------------------
arch/mips/configs/ar7_defconfig | 1 -
arch/mips/configs/bcm47xx_defconfig | 1 -
arch/mips/configs/bcm63xx_defconfig | 1 -
arch/mips/configs/bmips_be_defconfig | 1 -
arch/mips/configs/bmips_stb_defconfig | 1 -
arch/mips/configs/capcella_defconfig | 1 -
arch/mips/configs/ci20_defconfig | 1 -
arch/mips/configs/cu1000-neo_defconfig | 1 -
arch/mips/configs/cu1830-neo_defconfig | 1 -
arch/mips/configs/e55_defconfig | 1 -
arch/mips/configs/generic_defconfig | 1 -
arch/mips/configs/gpr_defconfig | 1 -
arch/mips/configs/loongson3_defconfig | 1 -
arch/mips/configs/mpc30x_defconfig | 1 -
arch/mips/configs/rt305x_defconfig | 1 -
arch/mips/configs/tb0219_defconfig | 1 -
arch/mips/configs/tb0226_defconfig | 1 -
arch/mips/configs/tb0287_defconfig | 1 -
arch/mips/configs/workpad_defconfig | 1 -
arch/mips/configs/xway_defconfig | 1 -
arch/mips/kernel/relocate.c | 4 +--
arch/mips/kernel/setup.c | 40 ++-------------------
arch/mips/pic32/pic32mzda/early_console.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 --
26 files changed, 5 insertions(+), 108 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..a65ce9ddbfce 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@ config EARLY_PRINTK_8250
config USE_GENERIC_EARLY_PRINTK_8250
bool
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most systems, it is firmware or second stage bootloader that
- by default specifies the kernel command line options. However,
- it might be necessary or advantageous to either override the
- default kernel command line or add a few extra options to it.
- For such cases, this option allows you to hardcode your own
- command line options directly into the kernel. For that, you
- should choose 'Y' here, and fill in the extra boot arguments
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
- Most MIPS systems will normally expect 'N' here and rely upon
- the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, and for the cases
- when you want to add some extra options to the command line or ignore
- the default command line, you can supply some command-line options at
- build time by entering them here. In other cases you can specify
- kernel args so that you don't have to set them up in board prom
- initialization routines.
-
- For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
- options.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firmware arguments"
- depends on CMDLINE_BOOL
- help
- By setting this option to 'Y' you will have your kernel ignore
- command line arguments from firmware or second stage bootloader.
- Instead, the built-in command line will be used exclusively.
-
- Normally, you will choose 'N' here.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index cf9c6329b807..5e8adcd799d0 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -120,5 +120,4 @@ CONFIG_SQUASHFS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 91ce75edbfb4..690f423509f0 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -77,5 +77,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 861f680184b9..19b15424f669 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -65,5 +65,4 @@ CONFIG_PROC_KCORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index 032bb51defe8..2db7712acc5d 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -75,5 +75,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 625bd2d7e685..bc1659d43ca7 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -86,5 +86,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 7bf8971af53b..300032a5caa0 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -87,5 +87,4 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834..f874e421b54f 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -203,5 +203,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9d75f5b77d5d..03cb524967e7 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -123,5 +123,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index 29decd0003c6..d733ccab494e 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -126,5 +126,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index fd82b858a8f0..ffc964d1bae7 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -33,5 +33,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
index 714169e411cf..6003f6c7aa09 100644
--- a/arch/mips/configs/generic_defconfig
+++ b/arch/mips/configs/generic_defconfig
@@ -88,5 +88,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 5cb91509bb7c..8998d28b94c8 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -306,5 +306,4 @@ CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 0e79f81217bc..c4f9a236bd1f 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -408,5 +408,4 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ieee754=relaxed"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index d4e038802510..6ecef2a666fc 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -49,5 +49,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index fec5851c164b..c34441ce6621 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -147,4 +147,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 6547f84750b5..ccf20bd156a1 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -73,5 +73,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 7e099f7c2286..9f78fd00a4f6 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -68,5 +68,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 0d881dd862c0..5529d0dacf94 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -81,5 +81,4 @@ CONFIG_NFSD_V3=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 891a5f77305d..ee712f7b5575 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -61,5 +61,4 @@ CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 9abbc0debc2a..ebd8dbdb0695 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -153,4 +153,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 499a5357c09f..13c955027696 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -244,15 +244,13 @@ static inline __init unsigned long get_random_boot(void)
static inline __init bool kaslr_disabled(void)
{
char *str;
-
-#if defined(CONFIG_CMDLINE_BOOL)
const char *builtin_cmdline = CONFIG_CMDLINE;
str = strstr(builtin_cmdline, "nokaslr");
if (str == builtin_cmdline ||
(str > builtin_cmdline && *(str - 1) == ' '))
return true;
-#endif
+
str = strstr(arcs_cmdline, "nokaslr");
if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' '))
return true;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 279be0153f8b..f2270528011b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -29,6 +29,7 @@
#include <linux/of_fdt.h>
#include <linux/dmi.h>
#include <linux/crash_dump.h>
+#include <linux/cmdline.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@@ -66,12 +67,6 @@ EXPORT_SYMBOL(mips_machtype);
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
@@ -546,28 +541,6 @@ static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
- /*
- * If CMDLINE_OVERRIDE is enabled then initializing the command line is
- * trivial - we simply use the built-in command line unconditionally &
- * unmodified.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- return;
- }
-
- /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
- * to the start of boot_command_line here. Otherwise, empty
- * boot_command_line to undo anything early_init_dt_scan_chosen() did.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- else
- boot_command_line[0] = 0;
-
#ifdef CONFIG_OF_EARLY_FLATTREE
/*
* If we're configured to take boot arguments from DT, look for those
@@ -585,16 +558,7 @@ static void __init bootcmdline_init(void)
* plat_mem_setup() should have filled arcs_cmdline with arguments from
* the bootloader.
*/
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs)
- bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
-
- /*
- * If the user specified a built-in command line & we didn't already
- * prepend it, we append it to boot_command_line here.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
- !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, arcs_cmdline);
}
/*
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
index 25372e62783b..94d3a5ba5e10 100644
--- a/arch/mips/pic32/pic32mzda/early_console.c
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -75,7 +75,7 @@ static char * __init pic32_getcmdline(void)
* arch_mem_init() has not been called yet, so we don't have a real
* command line setup if using CONFIG_CMDLINE_BOOL.
*/
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#ifdef CONFIG_CMDLINE_FORCE
return CONFIG_CMDLINE;
#else
return fw_getcmdline();
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 764f2d022fae..39fdacbbac56 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -40,9 +40,7 @@ void __init plat_mem_setup(void)
pr_info("Found following command lines\n");
pr_info(" boot_command_line: %s\n", boot_command_line);
pr_info(" arcs_cmdline : %s\n", arcs_cmdline);
-#ifdef CONFIG_CMDLINE_BOOL
pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
-#endif
if (dtb != __dtb_start)
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/sparc/Kconfig | 18 +-----------------
arch/sparc/prom/bootstr_64.c | 2 +-
2 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 164a5254c91c..2a197f3a2549 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -50,6 +50,7 @@ config SPARC
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select SET_FS
+ select GENERIC_CMDLINE if SPARC64
config SPARC32
def_bool !64BIT
@@ -313,23 +314,6 @@ config SCHED_MC
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- depends on SPARC64
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,9600 root=/dev/sda1"
- help
- Say Y here if you want to be able to pass default arguments to
- the kernel. This will be overridden by the bootloader, if you
- use one (such as SILO). This is most useful if you want to boot
- a kernel from TFTP, and want default options to be available
- with having them passed on the command line.
-
- NOTE: This option WILL override the PROM bootargs setting!
-
config SUN_PM
bool
default y if SPARC32
diff --git a/arch/sparc/prom/bootstr_64.c b/arch/sparc/prom/bootstr_64.c
index f1cc34d99eec..4853a45b3de9 100644
--- a/arch/sparc/prom/bootstr_64.c
+++ b/arch/sparc/prom/bootstr_64.c
@@ -25,7 +25,7 @@ struct {
char bootstr_buf[BARG_LEN];
} bootstr_info = {
.bootstr_len = BARG_LEN,
-#ifdef CONFIG_CMDLINE
+#if CONFIG_CMDLINE != ""
.bootstr_valid = 1,
.bootstr_buf = CONFIG_CMDLINE,
#endif
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/xtensa/Kconfig | 15 +--------------
arch/xtensa/configs/audio_kc705_defconfig | 1 -
arch/xtensa/configs/common_defconfig | 1 -
arch/xtensa/configs/generic_kc705_defconfig | 1 -
arch/xtensa/configs/iss_defconfig | 1 -
arch/xtensa/configs/nommu_kc705_defconfig | 1 -
arch/xtensa/configs/smp_lx200_defconfig | 1 -
arch/xtensa/configs/virt_defconfig | 1 -
arch/xtensa/configs/xip_kc705_defconfig | 1 -
arch/xtensa/kernel/setup.c | 10 ++--------
10 files changed, 3 insertions(+), 30 deletions(-)
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9ad6b7b82707..42309f5e9cda 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,6 +16,7 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
@@ -353,20 +354,6 @@ config GENERIC_CALIBRATE_DELAY
help
The BogoMIPS value can easily be derived from the CPU frequency.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,38400 root=/dev/ram"
- help
- On some architectures (EBSA110 and CATS), there is currently no way
- for the boot loader to pass arguments to the kernel. For these
- architectures, you should supply some command-line options at build
- time by entering them here. As a minimum, you should specify the
- memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
config USE_OF
bool "Flattened Device Tree support"
select OF
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index 3be62da8089b..5f8661a33ab4 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -27,7 +27,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index fa9389869154..6467ebcbb080 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -6,7 +6,6 @@ CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_XTENSA_PLATFORM_XT2000=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index e9d6b6f6eca1..8984c4e68a42 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 32ce8fb068f0..996ad115264d 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_PCI is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 88b2e222d4bf..54250bc74885 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -33,7 +33,6 @@ CONFIG_PREEMPT=y
CONFIG_MEMMAP_CACHEATTR=0xfff2442f
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705_nommu"
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index a47c85638ec1..58b284fd627f 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -30,7 +30,6 @@ CONFIG_HOTPLUG_CPU=y
# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="lx200mx"
diff --git a/arch/xtensa/configs/virt_defconfig b/arch/xtensa/configs/virt_defconfig
index 6d1387dfa96f..fb4dce2c70a3 100644
--- a/arch/xtensa/configs/virt_defconfig
+++ b/arch/xtensa/configs/virt_defconfig
@@ -21,7 +21,6 @@ CONFIG_XTENSA_VARIANT_DC233C=y
CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x80000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="virt"
diff --git a/arch/xtensa/configs/xip_kc705_defconfig b/arch/xtensa/configs/xip_kc705_defconfig
index 4f1ff9531f6a..ae4427773af2 100644
--- a/arch/xtensa/configs/xip_kc705_defconfig
+++ b/arch/xtensa/configs/xip_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_KERNEL_LOAD_ADDRESS=0xf6000000
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index ed184106e4cf..ebb009f112a5 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -25,6 +25,7 @@
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/cmdline.h>
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
@@ -73,10 +74,6 @@ extern unsigned long loops_per_jiffy;
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-#endif
-
#ifdef CONFIG_PARSE_BOOTPARAM
/*
* Boot parameter parsing.
@@ -257,10 +254,7 @@ void __init init_arch(bp_tag_t *bp_start)
early_init_devtree(dtb_start);
#endif
-#ifdef CONFIG_CMDLINE_BOOL
- if (!command_line[0])
- strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
-#endif
+ cmdline_build(command_line, command_line);
/* Early hook for platforms */
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4: Added missing selection of CONFIG_GENERIC_CMDLINE in Kconfig
---
arch/nios2/Kconfig | 25 ++-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 6 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..6018f3d626f8 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -10,6 +10,7 @@ config NIOS2
select COMMON_CLK
select TIMER_OF
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
@@ -90,31 +91,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..5b38d3d0ad64 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed);
parse_early_param();
}
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/openrisc/Kconfig | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 591acc5990dc..ca1d0f18fe16 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -25,6 +25,7 @@ config OPENRISC
select HAVE_UID16
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_CMDLINE
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_SMP_IDLE_THREAD
@@ -162,15 +163,6 @@ config OPENRISC_HAVE_SHADOW_GPRS
On SMP systems, this feature is mandatory.
On a unicore system it's safe to say N here if you are unsure.
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some architectures there is currently no way for the boot loader
- to pass arguments to the kernel. For these architectures, you should
- supply some command-line options at build time by entering them
- here.
-
menu "Debugging options"
config JUMP_UPON_UNHANDLED_EXCEPTION
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/hexagon/Kconfig | 11 +----------
arch/hexagon/kernel/setup.c | 10 ++--------
2 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 44a409967af1..1e69c99bae6b 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -18,6 +18,7 @@ config HEXAGON
select HAVE_PERF_EVENTS
# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
select GENERIC_ALLOCATOR
+ select GENERIC_CMDLINE
select GENERIC_IRQ_SHOW
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
@@ -91,16 +92,6 @@ config HEXAGON_ARCH_VERSION
int "Architecture version"
default 2
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some platforms, there is currently no way for the boot loader
- to pass arguments to the kernel. For these, you should supply some
- command-line options at build time by entering them here. At a
- minimum, you should specify the memory size and the root device
- (e.g., mem=64M root=/dev/nfs).
-
config SMP
bool "Multi-Processing support"
help
diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c
index 1880d9beaf2b..78641ce219e2 100644
--- a/arch/hexagon/kernel/setup.c
+++ b/arch/hexagon/kernel/setup.c
@@ -13,6 +13,7 @@
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/of_fdt.h>
+#include <linux/cmdline.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/setup.h>
@@ -22,7 +23,6 @@
#include <asm/time.h>
char cmd_line[COMMAND_LINE_SIZE];
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
int on_simulator;
@@ -38,8 +38,6 @@ void calibrate_delay(void)
void __init setup_arch(char **cmdline_p)
{
- char *p = &external_cmdline_buffer;
-
/*
* These will eventually be pulled in via either some hypervisor
* or devicetree description. Hardwiring for now.
@@ -65,11 +63,7 @@ void __init setup_arch(char **cmdline_p)
else
on_simulator = 0;
- if (p[0] != '\0')
- strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
- else
- strlcpy(boot_command_line, default_command_line,
- COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, external_cmdline_buffer);
/*
* boot_command_line and the value set up by setup_arch
--
2.25.0
Most architectures have similar boot command line manipulation
options. This patchs adds the definition in init/Kconfig, gated by
CONFIG_HAVE_CMDLINE that the architectures can select to use them.
CONFIG_CMDLINE_EXTEND is understood differently by architectures.
For some of them it appends built-in CMDLINE to bootloader provided
line. For others it appends the bootloader provided CMDLINE to the
built-in one.
To avoid confusion, this commit brings to different options:
- CONFIG_CMDLINE_APPEND to append the built-in CMDLINE to the
bootloader line.
- CONFIG_CMDLINE_PREPEND to prepend the built-in CMDLINE in front of
the bootloader line.
For compatibility with existing architecture which uses CONFIG_OF, as
OF has already been converted to generic cmdline, we keep
CONFIG_CMDLINE_EXTEND as a synonym to CONFIG_CMDLINE_APPEND until
arm, powerpc, riscv and sh architectures have been converted.
A few differences are identified and will have to be taken
into account when converting the architecture to generic cmdline:
- riscv has CMDLINE_FALLBACK instead of CMDLINE_FROM_BOOTLOADER
- Some architectures are using CONFIG_CMDLINE_OVERRIDE or
CONFIG_CMDLINE_OVERWRITE instead of CONFIG_CMDLINE_FORCE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v3:
- Comments from Will.
- Remove CONFIG_CMDLINE_BOOL. Using CONFIG_CMDLINE != "" instead, like arm and powerpc.
- Changed EXTEND to APPEND. Keep EXTEND for backward compatibility.
v4:
- Added CMDLINE_PREPEND as a dependency for INITRAMFS_FORCE
- Removed the EXTEND || APPEND in cmdline.h, keep EXTEND as it
will always exit and switch to APPEND in last patch.
Signed-off-by: Christophe Leroy <[email protected]>
---
init/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
usr/Kconfig | 2 +-
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/init/Kconfig b/init/Kconfig
index 5f5c776ef192..af0d84662cc2 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -117,6 +117,58 @@ config INIT_ENV_ARG_LIMIT
Maximum of each of the number of arguments and environment
variables passed to init from the kernel command line.
+config GENERIC_CMDLINE
+ bool
+
+config CMDLINE
+ string "Default kernel command string" if GENERIC_CMDLINE
+ default ""
+ help
+ Defines a default kernel command string.
+ If this string is not empty, additional choices are proposed
+ below to determine how it will be used by the kernel.
+
+choice
+ prompt "Kernel command line type" if CMDLINE != ""
+ default CMDLINE_PREPEND if ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
+ default CMDLINE_FROM_BOOTLOADER
+ depends on GENERIC_CMDLINE
+ help
+ Determine how the default kernel arguments are combined with any
+ arguments passed by the bootloader if any.
+
+config CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader. If
+ the boot loader doesn't provide any, the default kernel command
+ string provided in CMDLINE will be used.
+
+config CMDLINE_APPEND
+ bool "Append to the bootloader kernel arguments"
+ help
+ The default kernel command string will be appended to the
+ command-line arguments provided by the bootloader.
+
+config CMDLINE_PREPEND
+ bool "Prepend to the bootloader kernel arguments"
+ help
+ The default kernel command string will be prepended to the
+ command-line arguments provided by the bootloader.
+
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ help
+ Always use the default kernel command string, ignoring any
+ arguments provided by the bootloader.
+endchoice
+
+config CMDLINE_EXTEND
+ bool
+ default CMDLINE_APPEND
+ help
+ To be removed once all architectures are converted to generic CMDLINE
+
config COMPILE_TEST
bool "Compile also drivers which will not load"
depends on HAS_IOMEM
diff --git a/usr/Kconfig b/usr/Kconfig
index 8bbcf699fe3b..b397e6b114d1 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -24,7 +24,7 @@ config INITRAMFS_SOURCE
config INITRAMFS_FORCE
bool "Ignore the initramfs passed by the bootloader"
- depends on CMDLINE_EXTEND || CMDLINE_FORCE
+ depends on CMDLINE_PREPEND || CMDLINE_APPEND || CMDLINE_FORCE
help
This option causes the kernel to ignore the initramfs image
(or initrd image) passed to it by the bootloader. This is
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/microblaze/Kconfig | 24 +-----------------------
arch/microblaze/configs/mmu_defconfig | 2 +-
arch/microblaze/kernel/head.S | 4 ++--
3 files changed, 4 insertions(+), 26 deletions(-)
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0660f47012bc..1242f34bc2a2 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -15,6 +15,7 @@ config MICROBLAZE
select COMMON_CLK
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_CPU_DEVICES
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
@@ -93,29 +94,6 @@ source "kernel/Kconfig.hz"
config MMU
def_bool y
-comment "Boot options"
-
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyUL0,115200"
- help
- On some architectures there is currently no way for the boot loader
- to pass arguments to the kernel. For these architectures, you should
- supply some command-line options at build time by entering them
- here.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- default n
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
endmenu
menu "Kernel features"
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 51337fffb947..b4d2219d0a8f 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -16,7 +16,7 @@ CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
CONFIG_HZ_100=y
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
CONFIG_CMDLINE_FORCE=y
CONFIG_HIGHMEM=y
CONFIG_PCI_XILINX=y
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index ec2fcb545e64..605b18c86ac8 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -105,7 +105,7 @@ _copy_fdt:
addik r3, r3, -4 /* descrement loop */
no_fdt_arg:
-#ifndef CONFIG_CMDLINE_BOOL
+#if CONFIG_CMDLINE == ""
/*
* handling command line
* copy command line directly to cmd_line placed in data section.
@@ -126,7 +126,7 @@ _copy_command_line:
addik r5, r4, 0 /* add new space for command line */
tovirt(r5,r5)
skip:
-#endif /* CONFIG_CMDLINE_BOOL */
+#endif /* CONFIG_CMDLINE */
#ifdef NOT_COMPILE
/* save bram context */
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/x86/Kconfig | 45 ++---------------------------------------
arch/x86/kernel/setup.c | 17 ++--------------
2 files changed, 4 insertions(+), 58 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a20684d56b4b..66b384228ca3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -104,6 +104,7 @@ config X86
select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_USE_SYM_ANNOTATIONS
select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+ select ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
select ARCH_WANT_DEFAULT_BPF_JIT if X86_64
select ARCH_WANTS_DYNAMIC_TASK_STRUCT
select ARCH_WANT_HUGE_PMD_SHARE
@@ -118,6 +119,7 @@ config X86
select EDAC_SUPPORT
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
@@ -2358,49 +2360,6 @@ choice
endchoice
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- Allow for specifying boot arguments to the kernel at
- build time. On some systems (e.g. embedded ones), it is
- necessary or convenient to provide some or all of the
- kernel boot arguments with the kernel itself (that is,
- to not rely on the boot loader to provide them.)
-
- To compile command line arguments into the kernel,
- set this option to 'Y', then fill in the
- boot arguments in CONFIG_CMDLINE.
-
- Systems with fully functional boot loaders (i.e. non-embedded)
- should leave this option set to 'N'.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Enter arguments here that should be compiled into the kernel
- image and used at boot time. If the boot loader provides a
- command line at boot time, it is appended to this string to
- form the full kernel command line, when the system boots.
-
- However, you can use the CONFIG_CMDLINE_FORCE option to
- change this behavior.
-
- In most cases, the command line (whether built-in or provided
- by the boot loader) should specify the device for the root
- file system.
-
-config CMDLINE_FORCE
- bool "Built-in command line overrides boot loader arguments"
- depends on CMDLINE_BOOL && CMDLINE != ""
- help
- Set this option to 'Y' to have the kernel ignore the boot loader
- command line, and use ONLY the built-in command line.
-
- This is used to work around broken boot loaders. This should
- be set to 'N' under normal conditions.
-
config MODIFY_LDT_SYSCALL
bool "Enable the LDT (local descriptor table)" if EXPERT
default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6f2de58eeb54..3f274b02e51c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -5,6 +5,7 @@
* This file contains the setup_arch() code, which handles the architecture-dependent
* parts of early kernel initialization.
*/
+#include <linux/cmdline.h>
#include <linux/console.h>
#include <linux/crash_dump.h>
#include <linux/dma-map-ops.h>
@@ -161,9 +162,6 @@ unsigned long saved_video_mode;
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
@@ -883,18 +881,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_FORCE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
+ cmdline_build(boot_command_line, boot_command_line);
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
--
2.25.0
All architectures providing CONFIG_CMDLINE_EXTEND
are now converted to GENERIC_CMDLINE.
This configuration item is not used anymore, drop it.
Signed-off-by: Christophe Leroy <[email protected]>
---
include/linux/cmdline.h | 2 +-
init/Kconfig | 6 ------
2 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
index a0773dc365c7..020028e2bdf0 100644
--- a/include/linux/cmdline.h
+++ b/include/linux/cmdline.h
@@ -36,7 +36,7 @@ static __always_inline bool __cmdline_build(char *dst, const char *src)
len = cmdline_strlcat(dst, src, COMMAND_LINE_SIZE);
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ if (IS_ENABLED(CONFIG_CMDLINE_APPEND))
len = cmdline_strlcat(dst, " " CONFIG_CMDLINE, COMMAND_LINE_SIZE);
if (len < COMMAND_LINE_SIZE - 1)
diff --git a/init/Kconfig b/init/Kconfig
index af0d84662cc2..fa002e3765ab 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -163,12 +163,6 @@ config CMDLINE_FORCE
arguments provided by the bootloader.
endchoice
-config CMDLINE_EXTEND
- bool
- default CMDLINE_APPEND
- help
- To be removed once all architectures are converted to generic CMDLINE
-
config COMPILE_TEST
bool "Compile also drivers which will not load"
depends on HAS_IOMEM
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
v4: Restore the removed 'endmenu' in Kconfig
---
arch/sh/Kconfig | 28 +--------------------
arch/sh/configs/ap325rxa_defconfig | 2 +-
arch/sh/configs/dreamcast_defconfig | 2 +-
arch/sh/configs/ecovec24-romimage_defconfig | 2 +-
arch/sh/configs/ecovec24_defconfig | 2 +-
arch/sh/configs/edosk7760_defconfig | 2 +-
arch/sh/configs/espt_defconfig | 2 +-
arch/sh/configs/j2_defconfig | 2 +-
arch/sh/configs/kfr2r09-romimage_defconfig | 2 +-
arch/sh/configs/kfr2r09_defconfig | 2 +-
arch/sh/configs/lboxre2_defconfig | 2 +-
arch/sh/configs/microdev_defconfig | 2 +-
arch/sh/configs/migor_defconfig | 2 +-
arch/sh/configs/polaris_defconfig | 2 +-
arch/sh/configs/r7780mp_defconfig | 2 +-
arch/sh/configs/r7785rp_defconfig | 2 +-
arch/sh/configs/rsk7201_defconfig | 2 +-
arch/sh/configs/rsk7203_defconfig | 2 +-
arch/sh/configs/rts7751r2d1_defconfig | 2 +-
arch/sh/configs/rts7751r2dplus_defconfig | 2 +-
arch/sh/configs/sdk7780_defconfig | 2 +-
arch/sh/configs/sdk7786_defconfig | 2 +-
arch/sh/configs/se7206_defconfig | 2 +-
arch/sh/configs/se7343_defconfig | 2 +-
arch/sh/configs/se7712_defconfig | 2 +-
arch/sh/configs/se7721_defconfig | 2 +-
arch/sh/configs/se7724_defconfig | 2 +-
arch/sh/configs/se7751_defconfig | 2 +-
arch/sh/configs/se7780_defconfig | 2 +-
arch/sh/configs/sh03_defconfig | 2 +-
arch/sh/configs/sh2007_defconfig | 2 +-
arch/sh/configs/sh7757lcr_defconfig | 2 +-
arch/sh/configs/sh7763rdp_defconfig | 2 +-
arch/sh/configs/shmin_defconfig | 2 +-
arch/sh/configs/shx3_defconfig | 2 +-
arch/sh/configs/titan_defconfig | 2 +-
arch/sh/configs/ul2_defconfig | 2 +-
arch/sh/kernel/setup.c | 11 ++------
38 files changed, 39 insertions(+), 72 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e798e55915c2..92d6a4443166 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,6 +16,7 @@ config SUPERH
select CPU_NO_EFFICIENT_FFS
select DMA_DECLARE_COHERENT
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_SHOW
@@ -742,33 +743,6 @@ config ROMIMAGE_MMCIF
first part of the romImage which in turn loads the rest the kernel
image to RAM using the MMCIF hardware block.
-choice
- prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- help
- Setting this option allows the kernel command line arguments
- to be set.
-
-config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
- help
- Given string will overwrite any arguments passed in by
- a bootloader.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- Given string will be concatenated with arguments passed in
- by a bootloader.
-
-endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
endmenu
menu "Bus options"
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5193b3e099b9..3997aa49c75b 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -15,7 +15,7 @@ CONFIG_SH_AP325RXA=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 6a82c7b8ff32..ac030c1a351e 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -22,7 +22,7 @@ CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
CONFIG_MAPLE=y
CONFIG_PCI=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 5c60e71d839e..db78857ae30f 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -14,7 +14,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_ECOVEC=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200"
# CONFIG_SUSPEND is not set
CONFIG_NET=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 03cb916819fa..f6f7d2e1840d 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -16,7 +16,7 @@ CONFIG_SH_ECOVEC=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index d77f54e906fd..1ac8eb89c550 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -19,7 +19,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 2804cb760a76..1bffacbaba3d 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_SH_ESPT=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
index 2eb81ebe3888..983c62e936eb 100644
--- a/arch/sh/configs/j2_defconfig
+++ b/arch/sh/configs/j2_defconfig
@@ -10,7 +10,7 @@ CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SH_DEVICE_TREE=y
CONFIG_SH_JCORE_SOC=y
CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttyUL0 earlycon"
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index 04436b4fbd76..8418c1f0c1ce 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -15,7 +15,7 @@ CONFIG_SH_KFR2R09=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_HZ_100=y
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 quiet"
# CONFIG_SUSPEND is not set
CONFIG_NET=y
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index 833404490cfe..0b04d179ebba 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -19,7 +19,7 @@ CONFIG_NO_HZ=y
CONFIG_HZ_1000=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
# CONFIG_SUSPEND is not set
CONFIG_CPU_IDLE=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 05e4ac6fed5f..498c88953d2a 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -12,7 +12,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_LBOX_RE2=y
CONFIG_SH_PCLK_FREQ=40000000
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_PCCARD=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e9825196dd66..8467de1d3092 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -11,7 +11,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
CONFIG_SUPERHYWAY=y
CONFIG_NET=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 4859cd30cfc4..e43fb2a63f1f 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -15,7 +15,7 @@ CONFIG_NUMA=y
CONFIG_SH_MIGOR=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 246408ec7462..2fc2bdc0e002 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -25,7 +25,7 @@ CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_100=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index f823cc6b18f9..9e2438114890 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_PCLK_FREQ=33333333
CONFIG_PUSH_SWITCH=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_NET=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index f96bc20d4b1a..c1c92f154694 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -26,7 +26,7 @@ CONFIG_HEARTBEAT=y
CONFIG_PUSH_SWITCH=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_BINFMT_MISC=m
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index e41526120be1..65f3d695bc78 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -21,7 +21,7 @@ CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SH_RSK=y
CONFIG_SH_PCLK_FREQ=40000000
CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 6af08fa1ddf8..33f608c54b85 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
CONFIG_SH_CPU_FREQ=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 96263a4912b7..131699a6daa7 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -11,7 +11,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_1=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 92e586e6c974..ffa76ad8efaa 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -11,7 +11,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_PLUS=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 6c719ab4332a..a33f81c41a13 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
CONFIG_PCI=y
CONFIG_PCI_DEBUG=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index f776a1d0d277..1daf3dbffc16 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -70,7 +70,7 @@ CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_INTC_USERIMASK=y
CONFIG_INTC_BALANCING=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 315b04a8dd2f..c729ddb5d2c8 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -36,7 +36,7 @@ CONFIG_SH_CPU_FREQ=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 5d6c19338ebf..32fedfd8ae81 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -17,7 +17,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_7343_SOLUTION_ENGINE=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index ee6d28ae08de..02a8dcb898db 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index bad921bc10f8..a0ce6eca3bf5 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index a26f7f1841c7..9cd50acd959d 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -17,7 +17,7 @@ CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index 4a024065bb75..8c2beb3677e2 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -12,7 +12,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_7751_SOLUTION_ENGINE=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,38400"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index dcd85b858ac8..3be23f65c38e 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_SIZE=0x08000000
CONFIG_SH_7780_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_NET=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index ff502683132e..87e9805b76d0 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -16,7 +16,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_SH03=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig
index 99975db461d8..8e92c58316db 100644
--- a/arch/sh/configs/sh2007_defconfig
+++ b/arch/sh/configs/sh2007_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
CONFIG_PCCARD=y
CONFIG_BINFMT_MISC=y
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index a2700ab165af..a15877daff16 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -21,7 +21,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_SH7757LCR=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 8a6a446f9eb8..351ccabac8a6 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_SH_SH7763RDP=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index c0b6f40d01cc..7cc8725951f5 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -18,7 +18,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SH_ADC is not set
CONFIG_SH_SHMIN=y
CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
CONFIG_NET=y
CONFIG_UNIX=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 32ec6eb1eabc..36cac3067cef 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -47,7 +47,7 @@ CONFIG_KEXEC=y
CONFIG_SECCOMP=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ba887f1351be..5aa513d54df0 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_PCLK_FREQ=30000000
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 103b81ec1ffb..8d8b6787302f 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -18,7 +18,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_100=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4144be650d41..464ccbbd8205 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -32,6 +32,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/uaccess.h>
+#include <linux/cmdline.h>
#include <uapi/linux/mount.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -306,15 +307,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = virt_to_phys(__bss_start);
bss_resource.end = virt_to_phys(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#ifdef CONFIG_CMDLINE_EXTEND
- strlcat(command_line, " ", sizeof(command_line));
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
-#endif
+ cmdline_build(command_line, COMMAND_LINE);
/* Save unparsed command line copy for /proc/cmdline */
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
--
2.25.0
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/arm64/Kconfig | 33 +-----------------------------
arch/arm64/kernel/idreg-override.c | 9 ++++----
2 files changed, 5 insertions(+), 37 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e4e1b6550115..9781ba3758b1 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -105,6 +105,7 @@ config ARM64
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_CMDLINE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_EARLY_IOREMAP
@@ -1841,38 +1842,6 @@ config ARM64_ACPI_PARKING_PROTOCOL
protocol even if the corresponding data is present in the ACPI
MADT table.
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- Provide a set of default command-line options at build time by
- entering them here. As a minimum, you should specify the the
- root device (e.g. root=/dev/nfs).
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
- help
- Choose how the kernel will handle the provided default kernel
- command line string.
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EFI_STUB
bool
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 83f1c4b92095..96a4e96a80a2 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -9,6 +9,7 @@
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/libfdt.h>
+#include <linux/cmdline.h>
#include <asm/cacheflush.h>
#include <asm/cpufeature.h>
@@ -187,12 +188,10 @@ static __init const u8 *get_bootargs_cmdline(void)
static __init void parse_cmdline(void)
{
const u8 *prop = get_bootargs_cmdline();
+ static char __initdata cmdline[COMMAND_LINE_SIZE];
- if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !prop)
- __parse_cmdline(CONFIG_CMDLINE, true);
-
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && prop)
- __parse_cmdline(prop, true);
+ cmdline_build(cmdline, prop);
+ __parse_cmdline(cmdline, true);
}
/* Keep checkers quiet */
--
2.25.0
On Fri, Apr 02, 2021 at 03:18:01PM +0000, Christophe Leroy wrote:
> The purpose of this series is to improve and enhance the
> handling of kernel boot arguments.
>
> Current situation is that most if not all architectures are using
> similar options to do some manupulation on command line arguments:
> - Prepend built-in arguments in front of bootloader provided arguments
> - Append built-in arguments after bootloader provided arguments
> - Replace bootloader provided arguments by built-in arguments
> - Use built-in arguments when none is provided by bootloader.
>
> On some architectures, all the options are possible. On other ones,
> only a subset are available.
>
> The purpose of this series is to refactor and enhance the
> handling of kernel boot arguments so that every architecture can
> benefit from all possibilities.
>
> It is first focussed on powerpc but also extends the capability
> for other arches.
>
> The work has been focussed on minimising the churn in architectures
> by keeping the most commonly used namings.
>
> Main changes in V4:
> - Included patch from Daniel to replace powerpc's strcpy() by strlcpy()
> - Using strlcpy() instead of zeroing first char + strlcat() (idea taken frm Daniel's series)
> - Reworked the convertion of EFI which was wrong in V3
> - Added "too long" command line handling
> - Changed cmdline macro into a function
> - Done a few fixes in arch (NIOS2, SH, ARM)
> - Taken comments into account (see individual responses for details)
> - Tested on powerpc, build tested on ARM64, X86_64.
>
Why submit your changes ? My changes have been around for almost 10 years, and
are more widely used. Your changes are very new and unstable, but don't really
solve the needs of people using my series.
I've tried to work with you and I take comments from you, but yet you insist to
submit your own series.
I would suggest this isn't going to go anyplace unless we work together.
I can't really support your changes because, honestly, your changes are really
ugly and they just look more and more like my changes with every passing
iteration .. As the maturity of your changes continue they will just become my
change set.
I've been thru every iteration of these changes, and I see those attempts in
your changes. Everything different in your changes I've tried, and found not to
be useful, then it falls away in later iterations.
When you give me comments on something which I haven't tried I typically
incorporate it.
Daniel
On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote:
> -config CMDLINE_BOOL
> - bool "Built-in kernel command line"
> - help
> - For most systems, it is firmware or second stage bootloader that
> - by default specifies the kernel command line options. However,
> - it might be necessary or advantageous to either override the
> - default kernel command line or add a few extra options to it.
> - For such cases, this option allows you to hardcode your own
> - command line options directly into the kernel. For that, you
> - should choose 'Y' here, and fill in the extra boot arguments
> - in CONFIG_CMDLINE.
> -
> - The built-in options will be concatenated to the default command
> - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
> - command line will be ignored and replaced by the built-in string.
> -
> - Most MIPS systems will normally expect 'N' here and rely upon
> - the command line from the firmware or the second-stage bootloader.
> -
See how you complained that I have CMDLINE_BOOL in my changed, and you think it
shouldn't exist.
Yet here mips has it, and you just deleted it with no feature parity in your
changes for this.
In my changes I tried to maintain as much feature parity as I could with the
architectures. I did the same huge conversion a long time ago you've done here to be sure all
platforms have the features needed.
Daniel
On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote:
> On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote:
> > -config CMDLINE_BOOL
> > - bool "Built-in kernel command line"
> > - help
> > - For most systems, it is firmware or second stage bootloader that
> > - by default specifies the kernel command line options. However,
> > - it might be necessary or advantageous to either override the
> > - default kernel command line or add a few extra options to it.
> > - For such cases, this option allows you to hardcode your own
> > - command line options directly into the kernel. For that, you
> > - should choose 'Y' here, and fill in the extra boot arguments
> > - in CONFIG_CMDLINE.
> > -
> > - The built-in options will be concatenated to the default command
> > - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
> > - command line will be ignored and replaced by the built-in string.
> > -
> > - Most MIPS systems will normally expect 'N' here and rely upon
> > - the command line from the firmware or the second-stage bootloader.
> > -
>
>
> See how you complained that I have CMDLINE_BOOL in my changed, and you think it
> shouldn't exist.
>
> Yet here mips has it, and you just deleted it with no feature parity in your
> changes for this.
AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You
seem to need it just because you have CMDLINE_PREPEND and
CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL
is not a feature, but an implementation detail.
Rob
On Fri, Apr 02, 2021 at 03:18:20PM +0000, Christophe Leroy wrote:
> This converts the architecture to GENERIC_CMDLINE.
>
> Signed-off-by: Christophe Leroy <[email protected]>
> ---
> arch/x86/Kconfig | 45 ++---------------------------------------
> arch/x86/kernel/setup.c | 17 ++--------------
> 2 files changed, 4 insertions(+), 58 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index a20684d56b4b..66b384228ca3 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -104,6 +104,7 @@ config X86
> select ARCH_USE_QUEUED_SPINLOCKS
> select ARCH_USE_SYM_ANNOTATIONS
> select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
> + select ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
Seems to be non-existent kconfig option.
> select ARCH_WANT_DEFAULT_BPF_JIT if X86_64
> select ARCH_WANTS_DYNAMIC_TASK_STRUCT
> select ARCH_WANT_HUGE_PMD_SHARE
> @@ -118,6 +119,7 @@ config X86
> select EDAC_SUPPORT
> select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
> select GENERIC_CLOCKEVENTS_MIN_ADJUST
> + select GENERIC_CMDLINE
> select GENERIC_CMOS_UPDATE
> select GENERIC_CPU_AUTOPROBE
> select GENERIC_CPU_VULNERABILITIES
> @@ -2358,49 +2360,6 @@ choice
>
> endchoice
>
> -config CMDLINE_BOOL
> - bool "Built-in kernel command line"
> - help
> - Allow for specifying boot arguments to the kernel at
> - build time. On some systems (e.g. embedded ones), it is
> - necessary or convenient to provide some or all of the
> - kernel boot arguments with the kernel itself (that is,
> - to not rely on the boot loader to provide them.)
> -
> - To compile command line arguments into the kernel,
> - set this option to 'Y', then fill in the
> - boot arguments in CONFIG_CMDLINE.
> -
> - Systems with fully functional boot loaders (i.e. non-embedded)
> - should leave this option set to 'N'.
> -
> -config CMDLINE
> - string "Built-in kernel command string"
> - depends on CMDLINE_BOOL
> - default ""
> - help
> - Enter arguments here that should be compiled into the kernel
> - image and used at boot time. If the boot loader provides a
> - command line at boot time, it is appended to this string to
> - form the full kernel command line, when the system boots.
> -
> - However, you can use the CONFIG_CMDLINE_FORCE option to
> - change this behavior.
> -
> - In most cases, the command line (whether built-in or provided
> - by the boot loader) should specify the device for the root
> - file system.
> -
> -config CMDLINE_FORCE
> - bool "Built-in command line overrides boot loader arguments"
> - depends on CMDLINE_BOOL && CMDLINE != ""
> - help
> - Set this option to 'Y' to have the kernel ignore the boot loader
> - command line, and use ONLY the built-in command line.
> -
> - This is used to work around broken boot loaders. This should
> - be set to 'N' under normal conditions.
> -
> config MODIFY_LDT_SYSCALL
> bool "Enable the LDT (local descriptor table)" if EXPERT
> default y
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index 6f2de58eeb54..3f274b02e51c 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -5,6 +5,7 @@
> * This file contains the setup_arch() code, which handles the architecture-dependent
> * parts of early kernel initialization.
> */
> +#include <linux/cmdline.h>
> #include <linux/console.h>
> #include <linux/crash_dump.h>
> #include <linux/dma-map-ops.h>
> @@ -161,9 +162,6 @@ unsigned long saved_video_mode;
> #define RAMDISK_LOAD_FLAG 0x4000
>
> static char __initdata command_line[COMMAND_LINE_SIZE];
> -#ifdef CONFIG_CMDLINE_BOOL
> -static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
> -#endif
>
> #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
> struct edd edd;
> @@ -883,18 +881,7 @@ void __init setup_arch(char **cmdline_p)
> bss_resource.start = __pa_symbol(__bss_start);
> bss_resource.end = __pa_symbol(__bss_stop)-1;
>
> -#ifdef CONFIG_CMDLINE_BOOL
> -#ifdef CONFIG_CMDLINE_FORCE
> - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
> -#else
> - if (builtin_cmdline[0]) {
> - /* append boot loader cmdline to builtin */
> - strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
> - strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
> - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
> - }
> -#endif
> -#endif
> + cmdline_build(boot_command_line, boot_command_line);
>
> strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
> *cmdline_p = command_line;
Once this is all done, I wonder if we can get rid of the strlcpy and
perhaps also cmdline_p.
Rob
On Thu, Apr 08, 2021 at 02:04:08PM -0500, Rob Herring wrote:
> On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote:
> > On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote:
> > > -config CMDLINE_BOOL
> > > - bool "Built-in kernel command line"
> > > - help
> > > - For most systems, it is firmware or second stage bootloader that
> > > - by default specifies the kernel command line options. However,
> > > - it might be necessary or advantageous to either override the
> > > - default kernel command line or add a few extra options to it.
> > > - For such cases, this option allows you to hardcode your own
> > > - command line options directly into the kernel. For that, you
> > > - should choose 'Y' here, and fill in the extra boot arguments
> > > - in CONFIG_CMDLINE.
> > > -
> > > - The built-in options will be concatenated to the default command
> > > - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
> > > - command line will be ignored and replaced by the built-in string.
> > > -
> > > - Most MIPS systems will normally expect 'N' here and rely upon
> > > - the command line from the firmware or the second-stage bootloader.
> > > -
> >
> >
> > See how you complained that I have CMDLINE_BOOL in my changed, and you think it
> > shouldn't exist.
> >
> > Yet here mips has it, and you just deleted it with no feature parity in your
> > changes for this.
>
> AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You
> seem to need it just because you have CMDLINE_PREPEND and
> CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL
> is not a feature, but an implementation detail.
Not true.
It makes it easier to turn it all off inside the Kconfig , so it's for usability
and multiple architecture have it even with just CMDLINE as I was commenting
here.
Daniel
Le 08/04/2021 à 21:41, Rob Herring a écrit :
> On Fri, Apr 02, 2021 at 03:18:20PM +0000, Christophe Leroy wrote:
>> This converts the architecture to GENERIC_CMDLINE.
>>
>> Signed-off-by: Christophe Leroy <[email protected]>
>> ---
>> arch/x86/Kconfig | 45 ++---------------------------------------
>> arch/x86/kernel/setup.c | 17 ++--------------
>> 2 files changed, 4 insertions(+), 58 deletions(-)
>>
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index a20684d56b4b..66b384228ca3 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -104,6 +104,7 @@ config X86
>> select ARCH_USE_QUEUED_SPINLOCKS
>> select ARCH_USE_SYM_ANNOTATIONS
>> select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
>> + select ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
>
> Seems to be non-existent kconfig option.
Oops. Added in v5.
>> @@ -883,18 +881,7 @@ void __init setup_arch(char **cmdline_p)
>> bss_resource.start = __pa_symbol(__bss_start);
>> bss_resource.end = __pa_symbol(__bss_stop)-1;
>>
>> -#ifdef CONFIG_CMDLINE_BOOL
>> -#ifdef CONFIG_CMDLINE_FORCE
>> - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
>> -#else
>> - if (builtin_cmdline[0]) {
>> - /* append boot loader cmdline to builtin */
>> - strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
>> - strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
>> - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
>> - }
>> -#endif
>> -#endif
>> + cmdline_build(boot_command_line, boot_command_line);
>>
>> strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
>> *cmdline_p = command_line;
>
> Once this is all done, I wonder if we can get rid of the strlcpy and
> perhaps also cmdline_p.
>
It seems rather complicated, in init/main.c you have heavy manipulations of command lines which
seems to be done in setup_command_line() which seems to add stuff in front of command lines, at the
end we end up with several command lines:
/* Untouched saved command line (eg. for /proc) */
char *saved_command_line;
/* Command line for parameter parsing */
static char *static_command_line;
/* Untouched extra command line */
static char *extra_command_line;
Some of them come from the cmdline_p which others are from boot_command_line.
I think a cleanup on all that stuff would be worth it as a further step.
Le 09/04/2021 à 03:23, Daniel Walker a écrit :
> On Thu, Apr 08, 2021 at 02:04:08PM -0500, Rob Herring wrote:
>> On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote:
>>> On Fri, Apr 02, 2021 at 03:18:21PM +0000, Christophe Leroy wrote:
>>>> -config CMDLINE_BOOL
>>>> - bool "Built-in kernel command line"
>>>> - help
>>>> - For most systems, it is firmware or second stage bootloader that
>>>> - by default specifies the kernel command line options. However,
>>>> - it might be necessary or advantageous to either override the
>>>> - default kernel command line or add a few extra options to it.
>>>> - For such cases, this option allows you to hardcode your own
>>>> - command line options directly into the kernel. For that, you
>>>> - should choose 'Y' here, and fill in the extra boot arguments
>>>> - in CONFIG_CMDLINE.
>>>> -
>>>> - The built-in options will be concatenated to the default command
>>>> - line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
>>>> - command line will be ignored and replaced by the built-in string.
>>>> -
>>>> - Most MIPS systems will normally expect 'N' here and rely upon
>>>> - the command line from the firmware or the second-stage bootloader.
>>>> -
>>>
>>>
>>> See how you complained that I have CMDLINE_BOOL in my changed, and you think it
>>> shouldn't exist.
>>>
>>> Yet here mips has it, and you just deleted it with no feature parity in your
>>> changes for this.
>>
>> AFAICT, CMDLINE_BOOL equates to a non-empty or empty CONFIG_CMDLINE. You
>> seem to need it just because you have CMDLINE_PREPEND and
>> CMDLINE_APPEND. If that's not it, what feature is missing? CMDLINE_BOOL
>> is not a feature, but an implementation detail.
>
> Not true.
>
> It makes it easier to turn it all off inside the Kconfig , so it's for usability
> and multiple architecture have it even with just CMDLINE as I was commenting
> here.
>
Among the 13 architectures having CONFIG_CMDLINE, todayb only 6 have a CONFIG_CMDLINE_BOOL in addition:
arch/arm/Kconfig:config CMDLINE
arch/arm64/Kconfig:config CMDLINE
arch/hexagon/Kconfig:config CMDLINE
arch/microblaze/Kconfig:config CMDLINE
arch/mips/Kconfig.debug:config CMDLINE
arch/nios2/Kconfig:config CMDLINE
arch/openrisc/Kconfig:config CMDLINE
arch/powerpc/Kconfig:config CMDLINE
arch/riscv/Kconfig:config CMDLINE
arch/sh/Kconfig:config CMDLINE
arch/sparc/Kconfig:config CMDLINE
arch/x86/Kconfig:config CMDLINE
arch/xtensa/Kconfig:config CMDLINE
arch/microblaze/Kconfig:config CMDLINE_BOOL
arch/mips/Kconfig.debug:config CMDLINE_BOOL
arch/nios2/Kconfig:config CMDLINE_BOOL
arch/sparc/Kconfig:config CMDLINE_BOOL
arch/x86/Kconfig:config CMDLINE_BOOL
arch/xtensa/Kconfig:config CMDLINE_BOOL
In the begining I hesitated about the CMDLINE_BOOL, at the end I decided to go the same way as what
is done today in the kernel for initramfs with CONFIG_INITRAMFS_SOURCE.
The problem I see within adding CONFIG_CMDLINE_BOOL for every architecture which don't have it today
is that when doing a "make oldconfig" on their custom configs, thousands of users will loose their
CMDLINE without notice.
When we do the other way round, removing CONFIG_CMDLINE_BOOL on the 6 architectures that have it
today will have no impact on existing config.
Also, in order to avoid tons of #ifdefs in the code as mandated by Kernel Codying Style §21, we have
to have CONFIG_CMDLINE defined at all time, so at the end CONFIG_CMDLINE_BOOL is really redundant
with an empty CONFIG_CMDLINE.
Unlike you, the approach I took for my series is to minimise the impact on existing implementation
and existing configurations as much as possible.
I know you have a different approach where you break every existing config anyway.
https://www.kernel.org/doc/html/latest/process/coding-style.html#conditional-compilation
Christophe