This is the start of the stable review cycle for the 5.12.7 release.
There are 127 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.12.7-rc1
Joerg Roedel <[email protected]>
x86/boot/compressed/64: Check SEV encryption in the 32-bit boot-path
Francois Gervais <[email protected]>
rtc: pcf85063: fallback to parent of_node
Christoph Hellwig <[email protected]>
nvme-multipath: fix double initialization of ANA state
Jan Beulich <[email protected]>
x86/Xen: swap NX determination and GDT setup on BSP
Mike Rapoport <[email protected]>
openrisc: mm/init.c: remove unused memblock_region variable in map_ram()
Simon Rettberg <[email protected]>
drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
Tetsuo Handa <[email protected]>
tty: vt: always invoke vc->vc_sw->con_resize callback
Maciej W. Rozycki <[email protected]>
vt: Fix character height handling with VT_RESIZEX
Maciej W. Rozycki <[email protected]>
vt_ioctl: Revert VT_RESIZEX parameter handling removal
Maciej W. Rozycki <[email protected]>
vgacon: Record video mode changes with VT_RESIZEX
Igor Matheus Andrade Torrente <[email protected]>
video: hgafb: fix potential NULL pointer dereference
Tom Seewald <[email protected]>
qlcnic: Add null check after calling netdev_alloc_skb
Phillip Potter <[email protected]>
leds: lp5523: check return value of lp5xx_read and jump to cleanup code
Darrick J. Wong <[email protected]>
ics932s401: fix broken handling of errors when word reading fails
Greg Kroah-Hartman <[email protected]>
net: rtlwifi: properly check for alloc_workqueue() failure
Phillip Potter <[email protected]>
scsi: ufs: handle cleanup correctly on devm_reset_control_get error
Anirudh Rayabharam <[email protected]>
net: stmicro: handle clk_prepare() failure during init
Du Cheng <[email protected]>
ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()
Greg Kroah-Hartman <[email protected]>
Revert "niu: fix missing checks of niu_pci_eeprom_read"
Greg Kroah-Hartman <[email protected]>
Revert "qlcnic: Avoid potential NULL pointer dereference"
Greg Kroah-Hartman <[email protected]>
Revert "rtlwifi: fix a potential NULL pointer dereference"
Greg Kroah-Hartman <[email protected]>
Revert "media: rcar_drif: fix a memory disclosure"
Greg Kroah-Hartman <[email protected]>
cdrom: gdrom: initialize global variable at init time
Atul Gopinathan <[email protected]>
cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom
Greg Kroah-Hartman <[email protected]>
Revert "gdrom: fix a memory leak bug"
Greg Kroah-Hartman <[email protected]>
Revert "scsi: ufs: fix a missing check of devm_reset_control_get"
Greg Kroah-Hartman <[email protected]>
Revert "ecryptfs: replace BUG_ON with error handling code"
Greg Kroah-Hartman <[email protected]>
Revert "video: imsttfb: fix potential NULL pointer dereferences"
Greg Kroah-Hartman <[email protected]>
Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"
Greg Kroah-Hartman <[email protected]>
Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"
Greg Kroah-Hartman <[email protected]>
Revert "net: stmicro: fix a missing check of clk_prepare"
Greg Kroah-Hartman <[email protected]>
Revert "video: hgafb: fix potential NULL pointer dereference"
Arnd Bergmann <[email protected]>
kcsan: Fix debugfs initcall return type
Mikulas Patocka <[email protected]>
dm snapshot: fix crash with transient storage and zero chunk size
Mikulas Patocka <[email protected]>
dm snapshot: fix a crash when an origin has no snapshots
Michal Hocko <[email protected]>
Revert "mm/gup: check page posion status for coredump."
Mike Kravetz <[email protected]>
userfaultfd: hugetlbfs: fix new flag usage in error path
Varad Gautam <[email protected]>
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Jan Beulich <[email protected]>
xen-pciback: reconfigure also from backend watch handler
Jan Beulich <[email protected]>
xen-pciback: redo VF placement in the virtual topology
Jon Hunter <[email protected]>
gpio: tegra186: Don't set parent IRQ affinity
Neil Armstrong <[email protected]>
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
Neil Armstrong <[email protected]>
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
Daniel Beer <[email protected]>
mmc: sdhci-pci-gli: increase 1.8V regulator wait
Nicholas Piggin <[email protected]>
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
Nicholas Piggin <[email protected]>
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
Christian König <[email protected]>
dma-buf: fix unintended pin/unpin warnings
Guchun Chen <[email protected]>
drm/amdgpu: update sdma golden setting for Navi12
Guchun Chen <[email protected]>
drm/amdgpu: update gc golden setting for Navi12
Changfeng <[email protected]>
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
Yi Li <[email protected]>
drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE
Christian König <[email protected]>
drm/radeon: use the dummy page for GART if needed
Nikola Cornij <[email protected]>
drm/amd/display: Use the correct max downscaling value for DCN3.x family
Chris Wilson <[email protected]>
drm/i915/gem: Pin the L-shape quirked object as unshrinkable
Joerg Roedel <[email protected]>
x86/sev-es: Forward page-faults which happen during emulation
Joerg Roedel <[email protected]>
x86/sev-es: Use __put_user()/__get_user() for data accesses
Joerg Roedel <[email protected]>
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
Tom Lendacky <[email protected]>
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
Tom Lendacky <[email protected]>
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Nathan Chancellor <[email protected]>
x86/build: Fix location of '-plugin-opt=' flags
Sagi Grimberg <[email protected]>
nvme-tcp: fix possible use-after-completion
Greg Kroah-Hartman <[email protected]>
Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"
Anirudh Rayabharam <[email protected]>
rapidio: handle create_workqueue() failure
Greg Kroah-Hartman <[email protected]>
Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"
Barnabás Pőcze <[email protected]>
platform/x86: ideapad-laptop: fix method name typo
Christophe JAILLET <[email protected]>
uio_hv_generic: Fix another memory leak in error handling paths
Christophe JAILLET <[email protected]>
uio_hv_generic: Fix a memory leak in error handling paths
Martin Ågren <[email protected]>
uio/uio_pci_generic: fix return value changed in refactoring
Olivia Mackintosh <[email protected]>
ALSA: usb-audio: DJM-750: ensure format is set
Nicolas MURE <[email protected]>
ALSA: usb-audio: Configure Pioneer DJM-850 samplerate
Elia Devito <[email protected]>
ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Add fixup for HP OMEN laptop
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA
PeiSen Hou <[email protected]>
ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293
Hui Wang <[email protected]>
ALSA: hda/realtek: reset eapd coeff to default value for alc287
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix check for the size of isochronous packet payload
Greg Kroah-Hartman <[email protected]>
Revert "ALSA: sb8: add a check for request_region"
Daniel Cordova A <[email protected]>
ALSA: hda: fixup headset for ASUS GU502 laptop
Takashi Sakamoto <[email protected]>
ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
Takashi Iwai <[email protected]>
ALSA: usb-audio: Validate MS endpoint descriptors
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix calculation for size of IR context payload
Takashi Sakamoto <[email protected]>
ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
Takashi Iwai <[email protected]>
ALSA: line6: Fix racy initialization of LINE6 MIDI
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field
Takashi Iwai <[email protected]>
ALSA: intel8x0: Don't update period unless prepared
Takashi Sakamoto <[email protected]>
ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency
Hsin-Yi Wang <[email protected]>
misc: eeprom: at24: check suspend status before disable regulator
Christian Brauner <[email protected]>
fs/mount_setattr: tighten permission checks
Ronnie Sahlberg <[email protected]>
cifs: fix memory leak in smb2_copychunk_range
Johannes Thumshirn <[email protected]>
btrfs: zoned: fix parallel compressed writes
Johannes Thumshirn <[email protected]>
btrfs: zoned: pass start block to btrfs_use_zone_append
Filipe Manana <[email protected]>
btrfs: fix removed dentries still existing after log is synced
Josef Bacik <[email protected]>
btrfs: avoid RCU stalls while running delayed iputs
Alexey Kardashevskiy <[email protected]>
powerpc: Fix early setup to make early_ioremap() work
Zqiang <[email protected]>
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
Leo Yan <[email protected]>
locking/lockdep: Correct calling tracepoints
Like Xu <[email protected]>
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
Daniel Wagner <[email protected]>
nvmet: seset ns->file when open fails
Oleg Nesterov <[email protected]>
ptrace: make ptrace() fail if the tracee changed its pid unexpectedly
Nicholas Piggin <[email protected]>
powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks
xinhui pan <[email protected]>
drm/ttm: Do not add non-system domain BO into swap list
Yang Yingliang <[email protected]>
tools/testing/selftests/exec: fix link error
Dan Carpenter <[email protected]>
RDMA/uverbs: Fix a NULL vs IS_ERR() bug
Maor Gottlieb <[email protected]>
RDMA/mlx5: Fix query DCT via DEVX
Hans de Goede <[email protected]>
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
Hans de Goede <[email protected]>
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
Liming Sun <[email protected]>
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
James Smart <[email protected]>
nvme-fc: clear q_live at beginning of association teardown
Keith Busch <[email protected]>
nvme-tcp: rerun io_work if req_list is not empty
Wu Bo <[email protected]>
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
Wu Bo <[email protected]>
nvmet: fix memory leak in nvmet_alloc_ctrl()
Shay Drory <[email protected]>
RDMA/core: Don't access cm_id after its destruction
Leon Romanovsky <[email protected]>
RDMA/rxe: Return CQE error if invalid lkey was supplied
Bob Pearson <[email protected]>
RDMA/rxe: Split MEM into MR and MW
Maor Gottlieb <[email protected]>
RDMA/mlx5: Recover from fatal event in dual port mode
Zhen Lei <[email protected]>
scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()
Javed Hasan <[email protected]>
scsi: qedf: Add pointer checks in qedf_update_link_speed()
Bart Van Assche <[email protected]>
scsi: ufs: core: Increase the usable queue depth
Leon Romanovsky <[email protected]>
RDMA/rxe: Clear all QP fields if creation failed
Qiu Wenbo <[email protected]>
platform/x86: ideapad-laptop: fix a NULL pointer dereference
Leon Romanovsky <[email protected]>
RDMA/core: Prevent divide-by-zero error triggered by the user
Leon Romanovsky <[email protected]>
RDMA/siw: Release xarray entry
Leon Romanovsky <[email protected]>
RDMA/siw: Properly check send and receive CQ pointers
Lv Yunlong <[email protected]>
habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory
Rijo Thomas <[email protected]>
tee: amdtee: unload TA only when its refcount becomes 0
Christophe JAILLET <[email protected]>
openrisc: Fix a memory leak
Dan Carpenter <[email protected]>
firmware: arm_scpi: Prevent the ternary sign expansion bug
-------------
Diffstat:
Documentation/powerpc/syscall64-abi.rst | 10 +
Makefile | 4 +-
arch/openrisc/kernel/setup.c | 2 +
arch/openrisc/mm/init.c | 3 +-
arch/powerpc/include/asm/hvcall.h | 3 +
arch/powerpc/include/asm/paravirt.h | 22 +-
arch/powerpc/include/asm/ptrace.h | 45 ++--
arch/powerpc/include/asm/syscall.h | 42 ++--
arch/powerpc/kernel/setup_64.c | 4 +-
arch/powerpc/platforms/pseries/hvCall.S | 10 +
arch/powerpc/platforms/pseries/lpar.c | 3 +-
arch/x86/Makefile | 12 +-
arch/x86/boot/compressed/head_64.S | 85 +++++++
arch/x86/events/intel/core.c | 2 +-
arch/x86/kernel/sev-es-shared.c | 1 +
arch/x86/kernel/sev-es.c | 136 +++++++----
arch/x86/xen/enlighten_pv.c | 8 +-
drivers/cdrom/gdrom.c | 13 +-
drivers/dma-buf/dma-buf.c | 10 +-
drivers/firmware/arm_scpi.c | 4 +-
drivers/gpio/gpio-tegra186.c | 11 -
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 10 +-
drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 4 +
drivers/gpu/drm/amd/amdgpu/soc15.c | 2 -
.../gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 7 +-
.../drm/amd/display/dc/dcn301/dcn301_resource.c | 7 +-
.../drm/amd/display/dc/dcn302/dcn302_resource.c | 7 +-
drivers/gpu/drm/i915/gem/i915_gem_pages.c | 2 +
drivers/gpu/drm/i915/gt/gen7_renderclear.c | 5 +-
drivers/gpu/drm/i915/i915_gem.c | 11 +-
drivers/gpu/drm/radeon/radeon_gart.c | 3 +-
drivers/gpu/drm/ttm/ttm_bo.c | 2 +
drivers/hwmon/lm80.c | 11 +-
drivers/infiniband/core/cma.c | 5 +-
drivers/infiniband/core/uverbs_std_types_device.c | 7 +-
drivers/infiniband/hw/mlx5/devx.c | 6 +-
drivers/infiniband/hw/mlx5/main.c | 1 +
drivers/infiniband/sw/rxe/rxe_comp.c | 20 +-
drivers/infiniband/sw/rxe/rxe_loc.h | 29 +--
drivers/infiniband/sw/rxe/rxe_mr.c | 271 ++++++++++-----------
drivers/infiniband/sw/rxe/rxe_pool.c | 14 +-
drivers/infiniband/sw/rxe/rxe_qp.c | 7 +
drivers/infiniband/sw/rxe/rxe_req.c | 10 +-
drivers/infiniband/sw/rxe/rxe_resp.c | 34 +--
drivers/infiniband/sw/rxe/rxe_verbs.c | 22 +-
drivers/infiniband/sw/rxe/rxe_verbs.h | 60 +++--
drivers/infiniband/sw/siw/siw_verbs.c | 11 +-
drivers/leds/leds-lp5523.c | 2 +-
drivers/md/dm-snap.c | 6 +-
drivers/media/platform/rcar_drif.c | 1 -
drivers/misc/eeprom/at24.c | 6 +-
drivers/misc/habanalabs/gaudi/gaudi.c | 4 +-
drivers/misc/ics932s401.c | 2 +-
drivers/mmc/host/meson-gx-mmc.c | 7 +-
drivers/mmc/host/sdhci-pci-gli.c | 7 +-
.../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 8 +-
drivers/net/ethernet/sun/niu.c | 32 ++-
drivers/net/wireless/realtek/rtlwifi/base.c | 18 +-
drivers/nvme/host/core.c | 3 +-
drivers/nvme/host/fc.c | 12 +
drivers/nvme/host/multipath.c | 55 +++--
drivers/nvme/host/nvme.h | 8 +-
drivers/nvme/host/tcp.c | 5 +-
drivers/nvme/target/core.c | 2 +-
drivers/nvme/target/io-cmd-file.c | 8 +-
drivers/nvme/target/loop.c | 4 +-
drivers/platform/mellanox/mlxbf-tmfifo.c | 11 +-
drivers/platform/x86/Kconfig | 2 +-
drivers/platform/x86/dell/dell-smbios-wmi.c | 3 +-
drivers/platform/x86/ideapad-laptop.c | 13 +-
drivers/platform/x86/intel_int0002_vgpio.c | 80 ++++--
drivers/rapidio/rio_cm.c | 17 +-
drivers/rtc/rtc-pcf85063.c | 7 +-
drivers/scsi/qedf/qedf_main.c | 4 +-
drivers/scsi/qla2xxx/qla_nx.c | 3 +-
drivers/scsi/ufs/ufs-hisi.c | 15 +-
drivers/scsi/ufs/ufshcd.c | 5 +-
drivers/tee/amdtee/amdtee_private.h | 13 +
drivers/tee/amdtee/call.c | 94 ++++++-
drivers/tee/amdtee/core.c | 15 +-
drivers/tty/serial/mvebu-uart.c | 3 -
drivers/tty/vt/vt.c | 2 +-
drivers/tty/vt/vt_ioctl.c | 57 ++++-
drivers/uio/uio_hv_generic.c | 12 +-
drivers/uio/uio_pci_generic.c | 2 +-
drivers/video/console/vgacon.c | 56 +++--
drivers/video/fbdev/core/fbcon.c | 2 +-
drivers/video/fbdev/hgafb.c | 21 +-
drivers/video/fbdev/imsttfb.c | 5 -
drivers/xen/xen-pciback/vpci.c | 14 +-
drivers/xen/xen-pciback/xenbus.c | 22 +-
fs/btrfs/compression.c | 42 +++-
fs/btrfs/extent_io.c | 2 +-
fs/btrfs/inode.c | 3 +-
fs/btrfs/tree-log.c | 18 ++
fs/btrfs/zoned.c | 4 +-
fs/btrfs/zoned.h | 5 +-
fs/cifs/smb2ops.c | 2 +
fs/ecryptfs/crypto.c | 6 +-
fs/hugetlbfs/inode.c | 2 +-
fs/namespace.c | 6 +-
include/linux/console_struct.h | 1 +
ipc/mqueue.c | 6 +-
ipc/msg.c | 6 +-
ipc/sem.c | 6 +-
kernel/kcsan/debugfs.c | 3 +-
kernel/locking/lockdep.c | 4 +-
kernel/locking/mutex-debug.c | 4 +-
kernel/locking/mutex-debug.h | 2 +-
kernel/locking/mutex.c | 18 +-
kernel/locking/mutex.h | 4 +-
kernel/ptrace.c | 18 +-
mm/gup.c | 4 -
mm/internal.h | 20 --
mm/userfaultfd.c | 28 +--
sound/firewire/Kconfig | 4 +-
sound/firewire/amdtp-stream-trace.h | 6 +-
sound/firewire/amdtp-stream.c | 42 ++--
sound/firewire/bebob/bebob.c | 2 +-
sound/firewire/dice/dice-alesis.c | 2 +-
sound/firewire/dice/dice-tcelectronic.c | 4 +-
sound/firewire/oxfw/oxfw.c | 1 -
sound/isa/sb/sb8.c | 4 -
sound/pci/hda/patch_realtek.c | 135 +++++++++-
sound/pci/intel8x0.c | 7 +
sound/usb/line6/driver.c | 4 +
sound/usb/line6/pod.c | 5 -
sound/usb/line6/variax.c | 6 -
sound/usb/midi.c | 4 +
sound/usb/quirks.c | 4 +
tools/testing/selftests/exec/Makefile | 6 +-
tools/testing/selftests/seccomp/seccomp_bpf.c | 27 +-
135 files changed, 1401 insertions(+), 753 deletions(-)
From: Leon Romanovsky <[email protected]>
[ Upstream commit 54d87913f147a983589923c7f651f97de9af5be1 ]
The user_entry_size is supplied by the user and later used as a
denominator to calculate number of entries. The zero supplied by the user
will trigger the following divide-by-zero error:
divide error: 0000 [#1] SMP KASAN PTI
CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510
Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b
RSP: 0018:ffff88810416f828 EFLAGS: 00010246
RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d
RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000
RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f
R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0
FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0
ib_uverbs_cmd_verbs+0x1546/0x1940
ib_uverbs_ioctl+0x186/0x240
__x64_sys_ioctl+0x38a/0x1220
do_syscall_64+0x3f/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/uverbs_std_types_device.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/core/uverbs_std_types_device.c b/drivers/infiniband/core/uverbs_std_types_device.c
index 9ec6971056fa..a03021d94e11 100644
--- a/drivers/infiniband/core/uverbs_std_types_device.c
+++ b/drivers/infiniband/core/uverbs_std_types_device.c
@@ -331,6 +331,9 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QUERY_GID_TABLE)(
if (ret)
return ret;
+ if (!user_entry_size)
+ return -EINVAL;
+
max_entries = uverbs_attr_ptr_get_array_size(
attrs, UVERBS_ATTR_QUERY_GID_TABLE_RESP_ENTRIES,
user_entry_size);
--
2.30.2
From: Takashi Sakamoto <[email protected]>
commit 1be4f21d9984fa9835fae5411a29465dc5aece6f upstream.
The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.
Cc: <[email protected]>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/amdtp-stream.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -1068,23 +1068,22 @@ static int amdtp_stream_start(struct amd
s->data_block_counter = 0;
}
- /* initialize packet buffer */
+ // initialize packet buffer.
+ max_ctx_payload_size = amdtp_stream_get_max_payload(s);
if (s->direction == AMDTP_IN_STREAM) {
dir = DMA_FROM_DEVICE;
type = FW_ISO_CONTEXT_RECEIVE;
- if (!(s->flags & CIP_NO_HEADER))
+ if (!(s->flags & CIP_NO_HEADER)) {
+ max_ctx_payload_size -= 8;
ctx_header_size = IR_CTX_HEADER_SIZE_CIP;
- else
+ } else {
ctx_header_size = IR_CTX_HEADER_SIZE_NO_CIP;
-
- max_ctx_payload_size = amdtp_stream_get_max_payload(s) -
- ctx_header_size;
+ }
} else {
dir = DMA_TO_DEVICE;
type = FW_ISO_CONTEXT_TRANSMIT;
ctx_header_size = 0; // No effect for IT context.
- max_ctx_payload_size = amdtp_stream_get_max_payload(s);
if (!(s->flags & CIP_NO_HEADER))
max_ctx_payload_size -= IT_PKT_HEADER_SIZE_CIP;
}
From: Elia Devito <[email protected]>
commit f2be77fee648ddd6d0d259d3527344ba0120e314 upstream.
Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably
on similar models.
0x14 pin config override is required to enable all speakers and
alc285-speaker2-to-dac1 fixup to enable volume adjustment.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Signed-off-by: Elia Devito <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6534,6 +6534,7 @@ enum {
ALC285_FIXUP_IDEAPAD_S740_COEF,
ALC295_FIXUP_ASUS_DACS,
ALC295_FIXUP_HP_OMEN,
+ ALC285_FIXUP_HP_SPECTRE_X360,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8085,6 +8086,15 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
},
+ [ALC285_FIXUP_HP_SPECTRE_X360] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x14, 0x90170110 }, /* enable top speaker */
+ {}
+ },
+ .chained = true,
+ .chain_id = ALC285_FIXUP_SPEAKER2_TO_DAC1,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8245,6 +8255,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+ SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
@@ -8665,6 +8676,7 @@ static const struct hda_model_fixup alc2
{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
+ {.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
{}
};
#define ALC225_STANDARD_PINS \
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit e2f5efd0f0e229bd110eab513e7c0331d61a4649 ]
The immediate problem is that after commit
0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.
The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().
This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
[mpe: Drop unrelated cleanup & cleanup change log]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/setup_64.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 830fee91b2d9..c914fe8a2c67 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -369,11 +369,11 @@ void __init early_setup(unsigned long dt_ptr)
apply_feature_fixups();
setup_feature_keys();
- early_ioremap_setup();
-
/* Initialize the hash table or TLB handling */
early_init_mmu();
+ early_ioremap_setup();
+
/*
* After firmware and early platform setup code has set things up,
* we note the SPR values for configurable control/performance
--
2.30.2
From: Javed Hasan <[email protected]>
[ Upstream commit 73578af92a0fae6609b955fcc9113e50e413c80f ]
The following trace was observed:
[ 14.042059] Call Trace:
[ 14.042061] <IRQ>
[ 14.042068] qedf_link_update+0x144/0x1f0 [qedf]
[ 14.042117] qed_link_update+0x5c/0x80 [qed]
[ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed]
[ 14.042155] ? qed_set_ptt+0x70/0x80 [qed]
[ 14.042170] ? qed_set_ptt+0x70/0x80 [qed]
[ 14.042186] ? qed_rd+0x13/0x40 [qed]
[ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed]
[ 14.042221] ? qed_set_ptt+0x70/0x80 [qed]
[ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed]
[ 14.042245] tasklet_action_common.isra.14+0x5a/0x100
[ 14.042250] __do_softirq+0xe4/0x2f8
[ 14.042253] irq_exit+0xf7/0x100
[ 14.042255] do_IRQ+0x7f/0xd0
[ 14.042257] common_interrupt+0xf/0xf
[ 14.042259] </IRQ>
API qedf_link_update() is getting called from QED but by that time
shost_data is not initialised. This results in a NULL pointer dereference
when we try to dereference shost_data while updating supported_speeds.
Add a NULL pointer check before dereferencing shost_data.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedf/qedf_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index cec27f2ef70d..e5076f09d5ed 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -536,7 +536,9 @@ static void qedf_update_link_speed(struct qedf_ctx *qedf,
if (linkmode_intersects(link->supported_caps, sup_caps))
lport->link_supported_speeds |= FC_PORTSPEED_20GBIT;
- fc_host_supported_speeds(lport->host) = lport->link_supported_speeds;
+ if (lport->host && lport->host->shost_data)
+ fc_host_supported_speeds(lport->host) =
+ lport->link_supported_speeds;
}
static void qedf_bw_update(void *dev)
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ]
Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.
Link: https://lore.kernel.org/r/[email protected]
Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: Hulk Robot <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_nx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 0677295957bc..615e44af1ca6 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1063,7 +1063,8 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
return ret;
}
- if (qla82xx_flash_set_write_enable(ha))
+ ret = qla82xx_flash_set_write_enable(ha);
+ if (ret < 0)
goto done_write;
qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data);
--
2.30.2
From: Takashi Sakamoto <[email protected]>
commit 1b6604896e78969baffc1b6cc6bc175f95929ac4 upstream.
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <[email protected]>
Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/dice/dice-alesis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/firewire/dice/dice-alesis.c
+++ b/sound/firewire/dice/dice-alesis.c
@@ -16,7 +16,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_
static const unsigned int
alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
{10, 10, 4}, /* Tx0 = Analog + S/PDIF. */
- {16, 8, 0}, /* Tx1 = ADAT1 + ADAT2. */
+ {16, 4, 0}, /* Tx1 = ADAT1 + ADAT2 (available at low rate). */
};
int snd_dice_detect_alesis_formats(struct snd_dice *dice)
From: Takashi Iwai <[email protected]>
commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream.
snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed. This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/midi.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1889,8 +1889,12 @@ static int snd_usbmidi_get_ms_info(struc
ms_ep = find_usb_ms_endpoint_descriptor(hostep);
if (!ms_ep)
continue;
+ if (ms_ep->bLength <= sizeof(*ms_ep))
+ continue;
if (ms_ep->bNumEmbMIDIJack > 0x10)
continue;
+ if (ms_ep->bLength < sizeof(*ms_ep) + ms_ep->bNumEmbMIDIJack)
+ continue;
if (usb_endpoint_dir_out(ep)) {
if (endpoints[epidx].out_ep) {
if (++epidx >= MIDI_MAX_ENDPOINTS) {
From: Daniel Cordova A <[email protected]>
commit c1b55029493879f5bd585ff79f326e71f0bc05e3 upstream.
The GU502 requires a few steps to make headset i/o works properly:
pincfg, verbs to unmute headphone out and callback to toggle output
between speakers and headphone using jack.
Signed-off-by: Daniel Cordova A <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 62 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6232,6 +6232,35 @@ static void alc294_fixup_gx502_hp(struct
}
}
+static void alc294_gu502_toggle_output(struct hda_codec *codec,
+ struct hda_jack_callback *cb)
+{
+ /* Windows sets 0x10 to 0x8420 for Node 0x20 which is
+ * responsible from changes between speakers and headphones
+ */
+ if (snd_hda_jack_detect_state(codec, 0x21) == HDA_JACK_PRESENT)
+ alc_write_coef_idx(codec, 0x10, 0x8420);
+ else
+ alc_write_coef_idx(codec, 0x10, 0x0a20);
+}
+
+static void alc294_fixup_gu502_hp(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ if (!is_jack_detectable(codec, 0x21))
+ return;
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_jack_detect_enable_callback(codec, 0x21,
+ alc294_gu502_toggle_output);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ alc294_gu502_toggle_output(codec, NULL);
+ break;
+ }
+}
+
static void alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -6449,6 +6478,9 @@ enum {
ALC294_FIXUP_ASUS_GX502_HP,
ALC294_FIXUP_ASUS_GX502_PINS,
ALC294_FIXUP_ASUS_GX502_VERBS,
+ ALC294_FIXUP_ASUS_GU502_HP,
+ ALC294_FIXUP_ASUS_GU502_PINS,
+ ALC294_FIXUP_ASUS_GU502_VERBS,
ALC285_FIXUP_HP_GPIO_LED,
ALC285_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_GPIO_LED,
@@ -7687,6 +7719,35 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc294_fixup_gx502_hp,
},
+ [ALC294_FIXUP_ASUS_GU502_PINS] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x01a11050 }, /* rear HP mic */
+ { 0x1a, 0x01a11830 }, /* rear external mic */
+ { 0x21, 0x012110f0 }, /* rear HP out */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC294_FIXUP_ASUS_GU502_VERBS
+ },
+ [ALC294_FIXUP_ASUS_GU502_VERBS] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ /* set 0x15 to HP-OUT ctrl */
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+ /* unmute the 0x15 amp */
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
+ /* set 0x1b to HP-OUT */
+ { 0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC294_FIXUP_ASUS_GU502_HP
+ },
+ [ALC294_FIXUP_ASUS_GU502_HP] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc294_fixup_gu502_hp,
+ },
[ALC294_FIXUP_ASUS_COEF_1B] = {
.type = HDA_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
@@ -8198,6 +8259,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502),
+ SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
From: Greg Kroah-Hartman <[email protected]>
commit 94f88309f201821073f57ae6005caefa61bf7b7e upstream.
This reverts commit dcd0feac9bab901d5739de51b3f69840851f8919.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken. It's just an optional
resource reservation, so removing this check is fine.
Cc: Kangjie Lu <[email protected]>
Acked-by: Takashi Iwai <[email protected]>
Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/sb/sb8.c | 4 ----
1 file changed, 4 deletions(-)
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -95,10 +95,6 @@ static int snd_sb8_probe(struct device *
/* block the 0x388 port to avoid PnP conflicts */
acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
- if (!acard->fm_res) {
- err = -EBUSY;
- goto _err;
- }
if (port[dev] != SNDRV_AUTO_PORT) {
if ((err = snd_sbdsp_create(card, port[dev], irq[dev],
From: Yi Li <[email protected]>
commit d53751568359e5b3ffb859b13cbd79dc77a571f1 upstream.
When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB
entries which need to update in amdgpu_map_buffer() should be multiplied
by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE).
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Yi Li <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -267,7 +267,7 @@ static int amdgpu_ttm_map_buffer(struct
*addr += offset & ~PAGE_MASK;
num_dw = ALIGN(adev->mman.buffer_funcs->copy_num_dw, 8);
- num_bytes = num_pages * 8;
+ num_bytes = num_pages * 8 * AMDGPU_GPU_PAGES_IN_CPU_PAGE;
r = amdgpu_job_alloc_with_ib(adev, num_dw * 4 + num_bytes,
AMDGPU_IB_POOL_DELAYED, &job);
From: Zqiang <[email protected]>
[ Upstream commit 3a010c493271f04578b133de977e0e5dd2848cea ]
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks")
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Zqiang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/mutex-debug.c | 4 ++--
kernel/locking/mutex-debug.h | 2 +-
kernel/locking/mutex.c | 18 +++++++++++++-----
kernel/locking/mutex.h | 4 +---
4 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
index a7276aaf2abc..db9301591e3f 100644
--- a/kernel/locking/mutex-debug.c
+++ b/kernel/locking/mutex-debug.c
@@ -57,7 +57,7 @@ void debug_mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
task->blocked_on = waiter;
}
-void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
struct task_struct *task)
{
DEBUG_LOCKS_WARN_ON(list_empty(&waiter->list));
@@ -65,7 +65,7 @@ void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
DEBUG_LOCKS_WARN_ON(task->blocked_on != waiter);
task->blocked_on = NULL;
- list_del_init(&waiter->list);
+ INIT_LIST_HEAD(&waiter->list);
waiter->task = NULL;
}
diff --git a/kernel/locking/mutex-debug.h b/kernel/locking/mutex-debug.h
index 1edd3f45a4ec..53e631e1d76d 100644
--- a/kernel/locking/mutex-debug.h
+++ b/kernel/locking/mutex-debug.h
@@ -22,7 +22,7 @@ extern void debug_mutex_free_waiter(struct mutex_waiter *waiter);
extern void debug_mutex_add_waiter(struct mutex *lock,
struct mutex_waiter *waiter,
struct task_struct *task);
-extern void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+extern void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
struct task_struct *task);
extern void debug_mutex_unlock(struct mutex *lock);
extern void debug_mutex_init(struct mutex *lock, const char *name,
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index 622ebdfcd083..3899157c13b1 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -194,7 +194,7 @@ static inline bool __mutex_waiter_is_first(struct mutex *lock, struct mutex_wait
* Add @waiter to a given location in the lock wait_list and set the
* FLAG_WAITERS flag if it's the first waiter.
*/
-static void __sched
+static void
__mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
struct list_head *list)
{
@@ -205,6 +205,16 @@ __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
__mutex_set_flag(lock, MUTEX_FLAG_WAITERS);
}
+static void
+__mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter)
+{
+ list_del(&waiter->list);
+ if (likely(list_empty(&lock->wait_list)))
+ __mutex_clear_flag(lock, MUTEX_FLAGS);
+
+ debug_mutex_remove_waiter(lock, waiter, current);
+}
+
/*
* Give up ownership to a specific task, when @task = NULL, this is equivalent
* to a regular unlock. Sets PICKUP on a handoff, clears HANDOF, preserves
@@ -1061,9 +1071,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
__ww_mutex_check_waiters(lock, ww_ctx);
}
- mutex_remove_waiter(lock, &waiter, current);
- if (likely(list_empty(&lock->wait_list)))
- __mutex_clear_flag(lock, MUTEX_FLAGS);
+ __mutex_remove_waiter(lock, &waiter);
debug_mutex_free_waiter(&waiter);
@@ -1080,7 +1088,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
err:
__set_current_state(TASK_RUNNING);
- mutex_remove_waiter(lock, &waiter, current);
+ __mutex_remove_waiter(lock, &waiter);
err_early_kill:
spin_unlock(&lock->wait_lock);
debug_mutex_free_waiter(&waiter);
diff --git a/kernel/locking/mutex.h b/kernel/locking/mutex.h
index 1c2287d3fa71..f0c710b1d192 100644
--- a/kernel/locking/mutex.h
+++ b/kernel/locking/mutex.h
@@ -10,12 +10,10 @@
* !CONFIG_DEBUG_MUTEXES case. Most of them are NOPs:
*/
-#define mutex_remove_waiter(lock, waiter, task) \
- __list_del((waiter)->list.prev, (waiter)->list.next)
-
#define debug_mutex_wake_waiter(lock, waiter) do { } while (0)
#define debug_mutex_free_waiter(waiter) do { } while (0)
#define debug_mutex_add_waiter(lock, waiter, ti) do { } while (0)
+#define debug_mutex_remove_waiter(lock, waiter, ti) do { } while (0)
#define debug_mutex_unlock(lock) do { } while (0)
#define debug_mutex_init(lock, name, key) do { } while (0)
--
2.30.2
From: xinhui pan <[email protected]>
[ Upstream commit ad2c28bd9a4083816fa45a7e90c2486cde8a9873 ]
BO would be added into swap list if it is validated into system domain.
If BO is validated again into non-system domain, say, VRAM domain. It
actually should not be in the swap list.
Signed-off-by: xinhui pan <[email protected]>
Acked-by: Guchun Chen <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/ttm/ttm_bo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 101a68dc615b..799ec7a7caa4 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -153,6 +153,8 @@ void ttm_bo_move_to_lru_tail(struct ttm_buffer_object *bo,
swap = &ttm_bo_glob.swap_lru[bo->priority];
list_move_tail(&bo->swap, swap);
+ } else {
+ list_del_init(&bo->swap);
}
if (bdev->driver->del_from_lru_notify)
--
2.30.2
From: Josef Bacik <[email protected]>
commit 71795ee590111e3636cc3c148289dfa9fa0a5fc3 upstream.
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally. However there's no guarantee of this, especially for small
files. In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:
host count: 5
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208
(t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1
CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1
Call Trace:
<IRQ> dump_stack+0x50/0x70
nmi_cpu_backtrace.cold.6+0x30/0x65
? lapic_can_unplug_cpu.cold.30+0x40/0x40
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x99/0xc7
rcu_sched_clock_irq.cold.90+0x1b2/0x3a3
? trigger_load_balance+0x5c/0x200
? tick_sched_do_timer+0x60/0x60
? tick_sched_do_timer+0x60/0x60
update_process_times+0x24/0x50
tick_sched_timer+0x37/0x70
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20 </IRQ>
RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0
RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029
RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200
RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200
R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870
? kzalloc.constprop.57+0x30/0x30
list_lru_add+0x5a/0x100
inode_lru_list_add+0x20/0x40
iput+0x1c1/0x1f0
run_delayed_iput_locked+0x46/0x90
btrfs_run_delayed_iputs+0x3f/0x60
cleaner_kthread+0xf2/0x120
kthread+0x10b/0x130
Fix this by adding a cond_resched_lock() to the loop processing delayed
iputs so we can avoid these sort of stalls.
CC: [email protected] # 4.9+
Reviewed-by: Rik van Riel <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3253,6 +3253,7 @@ void btrfs_run_delayed_iputs(struct btrf
inode = list_first_entry(&fs_info->delayed_iputs,
struct btrfs_inode, delayed_iput);
run_delayed_iput_locked(fs_info, inode);
+ cond_resched_lock(&fs_info->delayed_iput_lock);
}
spin_unlock(&fs_info->delayed_iput_lock);
}
From: Johannes Thumshirn <[email protected]>
commit e380adfc213a13677993c0e35cb48f5a8e61ebb0 upstream.
btrfs_use_zone_append only needs the passed in extent_map's block_start
member, so there's no need to pass in the full extent map.
This also enables the use of btrfs_use_zone_append in places where we only
have a start byte but no extent_map.
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/extent_io.c | 2 +-
fs/btrfs/inode.c | 2 +-
fs/btrfs/zoned.c | 4 ++--
fs/btrfs/zoned.h | 5 ++---
4 files changed, 6 insertions(+), 7 deletions(-)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3762,7 +3762,7 @@ static noinline_for_stack int __extent_w
/* Note that em_end from extent_map_end() is exclusive */
iosize = min(em_end, end + 1) - cur;
- if (btrfs_use_zone_append(inode, em))
+ if (btrfs_use_zone_append(inode, em->block_start))
opf = REQ_OP_ZONE_APPEND;
free_extent_map(em);
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7782,7 +7782,7 @@ static int btrfs_dio_iomap_begin(struct
iomap->bdev = fs_info->fs_devices->latest_bdev;
iomap->length = len;
- if (write && btrfs_use_zone_append(BTRFS_I(inode), em))
+ if (write && btrfs_use_zone_append(BTRFS_I(inode), em->block_start))
iomap->flags |= IOMAP_F_ZONE_APPEND;
free_extent_map(em);
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -1278,7 +1278,7 @@ void btrfs_free_redirty_list(struct btrf
spin_unlock(&trans->releasing_ebs_lock);
}
-bool btrfs_use_zone_append(struct btrfs_inode *inode, struct extent_map *em)
+bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct btrfs_block_group *cache;
@@ -1293,7 +1293,7 @@ bool btrfs_use_zone_append(struct btrfs_
if (!is_data_inode(&inode->vfs_inode))
return false;
- cache = btrfs_lookup_block_group(fs_info, em->block_start);
+ cache = btrfs_lookup_block_group(fs_info, start);
ASSERT(cache);
if (!cache)
return false;
--- a/fs/btrfs/zoned.h
+++ b/fs/btrfs/zoned.h
@@ -47,7 +47,7 @@ void btrfs_calc_zone_unusable(struct btr
void btrfs_redirty_list_add(struct btrfs_transaction *trans,
struct extent_buffer *eb);
void btrfs_free_redirty_list(struct btrfs_transaction *trans);
-bool btrfs_use_zone_append(struct btrfs_inode *inode, struct extent_map *em);
+bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start);
void btrfs_record_physical_zoned(struct inode *inode, u64 file_offset,
struct bio *bio);
void btrfs_rewrite_logical_zoned(struct btrfs_ordered_extent *ordered);
@@ -146,8 +146,7 @@ static inline void btrfs_redirty_list_ad
struct extent_buffer *eb) { }
static inline void btrfs_free_redirty_list(struct btrfs_transaction *trans) { }
-static inline bool btrfs_use_zone_append(struct btrfs_inode *inode,
- struct extent_map *em)
+static inline bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start)
{
return false;
}
From: Takashi Iwai <[email protected]>
commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream.
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/line6/driver.c | 4 ++++
sound/usb/line6/pod.c | 5 -----
sound/usb/line6/variax.c | 6 ------
3 files changed, 4 insertions(+), 11 deletions(-)
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -699,6 +699,10 @@ static int line6_init_cap_control(struct
line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
if (!line6->buffer_message)
return -ENOMEM;
+
+ ret = line6_init_midi(line6);
+ if (ret < 0)
+ return ret;
} else {
ret = line6_hwdep_init(line6);
if (ret < 0)
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -376,11 +376,6 @@ static int pod_init(struct usb_line6 *li
if (err < 0)
return err;
- /* initialize MIDI subsystem: */
- err = line6_init_midi(line6);
- if (err < 0)
- return err;
-
/* initialize PCM subsystem: */
err = line6_init_pcm(line6, &pod_pcm_properties);
if (err < 0)
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -159,7 +159,6 @@ static int variax_init(struct usb_line6
const struct usb_device_id *id)
{
struct usb_line6_variax *variax = line6_to_variax(line6);
- int err;
line6->process_message = line6_variax_process_message;
line6->disconnect = line6_variax_disconnect;
@@ -172,11 +171,6 @@ static int variax_init(struct usb_line6
if (variax->buffer_activate == NULL)
return -ENOMEM;
- /* initialize MIDI subsystem: */
- err = line6_init_midi(&variax->line6);
- if (err < 0)
- return err;
-
/* initiate startup procedure: */
schedule_delayed_work(&line6->startup_work,
msecs_to_jiffies(VARIAX_STARTUP_DELAY1));
From: Joerg Roedel <[email protected]>
commit c25bbdb564060adaad5c3a8a10765c13487ba6a3 upstream.
When emulating guest instructions for MMIO or IOIO accesses, the #VC
handler might get a page-fault and will not be able to complete. Forward
the page-fault in this case to the correct handler instead of killing
the machine.
Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected] # v5.10+
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/sev-es.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -1269,6 +1269,10 @@ static __always_inline void vc_forward_e
case X86_TRAP_UD:
exc_invalid_op(ctxt->regs);
break;
+ case X86_TRAP_PF:
+ write_cr2(ctxt->fi.cr2);
+ exc_page_fault(ctxt->regs, error_code);
+ break;
case X86_TRAP_AC:
exc_alignment_check(ctxt->regs, error_code);
break;
From: Nikola Cornij <[email protected]>
commit 84c63d040938f64a7dc195696301166e75231bf5 upstream.
[why]
As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The
max downscaling limit value for DCN2.x is 250, which means it's
calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167.
[how]
Set maximum downscaling limit to 167 for DCN3.x
Signed-off-by: Nikola Cornij <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Stylon Wang <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 7 ++++---
drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c | 7 ++++---
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c | 7 ++++---
3 files changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -826,10 +826,11 @@ static const struct dc_plane_cap plane_c
.fp16 = 16000
},
+ /* 6:1 downscaling ratio: 1000/6 = 166.666 */
.max_downscale_factor = {
- .argb8888 = 600,
- .nv12 = 600,
- .fp16 = 600
+ .argb8888 = 167,
+ .nv12 = 167,
+ .fp16 = 167
}
};
--- a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
@@ -843,10 +843,11 @@ static const struct dc_plane_cap plane_c
.fp16 = 16000
},
+ /* 6:1 downscaling ratio: 1000/6 = 166.666 */
.max_downscale_factor = {
- .argb8888 = 600,
- .nv12 = 600,
- .fp16 = 600
+ .argb8888 = 167,
+ .nv12 = 167,
+ .fp16 = 167
},
64,
64
--- a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c
@@ -282,10 +282,11 @@ static const struct dc_plane_cap plane_c
.nv12 = 16000,
.fp16 = 16000
},
+ /* 6:1 downscaling ratio: 1000/6 = 166.666 */
.max_downscale_factor = {
- .argb8888 = 600,
- .nv12 = 600,
- .fp16 = 600
+ .argb8888 = 167,
+ .nv12 = 167,
+ .fp16 = 167
},
16,
16
From: Joerg Roedel <[email protected]>
commit 4954f5b8ef0baf70fe978d1a99a5f70e4dd5c877 upstream.
The put_user() and get_user() functions do checks on the address which is
passed to them. They check whether the address is actually a user-space
address and whether its fine to access it. They also call might_fault()
to indicate that they could fault and possibly sleep.
All of these checks are neither wanted nor needed in the #VC exception
handler, which can be invoked from almost any context and also for MMIO
instructions from kernel space on kernel memory. All the #VC handler
wants to know is whether a fault happened when the access was tried.
This is provided by __put_user()/__get_user(), which just do the access
no matter what. Also add comments explaining why __get_user() and
__put_user() are the best choice here and why it is safe to use them
in this context. Also explain why copy_to/from_user can't be used.
In addition, also revert commit
7024f60d6552 ("x86/sev-es: Handle string port IO to kernel memory properly")
because using __get_user()/__put_user() fixes the same problem while
the above commit introduced several problems:
1) It uses access_ok() which is only allowed in task context.
2) It uses memcpy() which has no fault handling at all and is
thus unsafe to use here.
[ bp: Fix up commit ID of the reverted commit above. ]
Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected] # v5.10+
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/sev-es.c | 66 ++++++++++++++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 20 deletions(-)
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -288,31 +288,44 @@ static enum es_result vc_write_mem(struc
u16 d2;
u8 d1;
- /* If instruction ran in kernel mode and the I/O buffer is in kernel space */
- if (!user_mode(ctxt->regs) && !access_ok(target, size)) {
- memcpy(dst, buf, size);
- return ES_OK;
- }
-
+ /*
+ * This function uses __put_user() independent of whether kernel or user
+ * memory is accessed. This works fine because __put_user() does no
+ * sanity checks of the pointer being accessed. All that it does is
+ * to report when the access failed.
+ *
+ * Also, this function runs in atomic context, so __put_user() is not
+ * allowed to sleep. The page-fault handler detects that it is running
+ * in atomic context and will not try to take mmap_sem and handle the
+ * fault, so additional pagefault_enable()/disable() calls are not
+ * needed.
+ *
+ * The access can't be done via copy_to_user() here because
+ * vc_write_mem() must not use string instructions to access unsafe
+ * memory. The reason is that MOVS is emulated by the #VC handler by
+ * splitting the move up into a read and a write and taking a nested #VC
+ * exception on whatever of them is the MMIO access. Using string
+ * instructions here would cause infinite nesting.
+ */
switch (size) {
case 1:
memcpy(&d1, buf, 1);
- if (put_user(d1, target))
+ if (__put_user(d1, target))
goto fault;
break;
case 2:
memcpy(&d2, buf, 2);
- if (put_user(d2, target))
+ if (__put_user(d2, target))
goto fault;
break;
case 4:
memcpy(&d4, buf, 4);
- if (put_user(d4, target))
+ if (__put_user(d4, target))
goto fault;
break;
case 8:
memcpy(&d8, buf, 8);
- if (put_user(d8, target))
+ if (__put_user(d8, target))
goto fault;
break;
default:
@@ -343,30 +356,43 @@ static enum es_result vc_read_mem(struct
u16 d2;
u8 d1;
- /* If instruction ran in kernel mode and the I/O buffer is in kernel space */
- if (!user_mode(ctxt->regs) && !access_ok(s, size)) {
- memcpy(buf, src, size);
- return ES_OK;
- }
-
+ /*
+ * This function uses __get_user() independent of whether kernel or user
+ * memory is accessed. This works fine because __get_user() does no
+ * sanity checks of the pointer being accessed. All that it does is
+ * to report when the access failed.
+ *
+ * Also, this function runs in atomic context, so __get_user() is not
+ * allowed to sleep. The page-fault handler detects that it is running
+ * in atomic context and will not try to take mmap_sem and handle the
+ * fault, so additional pagefault_enable()/disable() calls are not
+ * needed.
+ *
+ * The access can't be done via copy_from_user() here because
+ * vc_read_mem() must not use string instructions to access unsafe
+ * memory. The reason is that MOVS is emulated by the #VC handler by
+ * splitting the move up into a read and a write and taking a nested #VC
+ * exception on whatever of them is the MMIO access. Using string
+ * instructions here would cause infinite nesting.
+ */
switch (size) {
case 1:
- if (get_user(d1, s))
+ if (__get_user(d1, s))
goto fault;
memcpy(buf, &d1, 1);
break;
case 2:
- if (get_user(d2, s))
+ if (__get_user(d2, s))
goto fault;
memcpy(buf, &d2, 2);
break;
case 4:
- if (get_user(d4, s))
+ if (__get_user(d4, s))
goto fault;
memcpy(buf, &d4, 4);
break;
case 8:
- if (get_user(d8, s))
+ if (__get_user(d8, s))
goto fault;
memcpy(buf, &d8, 8);
break;
From: Christian König <[email protected]>
commit 0c8df343c200529e6b9820bdfed01814140f75e4 upstream.
Imported BOs don't have a pagelist any more.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Fixes: 0575ff3d33cd ("drm/radeon: stop using pages with drm_prime_sg_to_page_addr_arrays v2")
CC: [email protected] # 5.12
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_gart.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -301,7 +301,8 @@ int radeon_gart_bind(struct radeon_devic
p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE);
for (i = 0; i < pages; i++, p++) {
- rdev->gart.pages[p] = pagelist[i];
+ rdev->gart.pages[p] = pagelist ? pagelist[i] :
+ rdev->dummy_page.page;
page_base = dma_addr[i];
for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
page_entry = radeon_gart_get_page_entry(page_base, flags);
From: Changfeng <[email protected]>
commit dbd1003d1252db5973dddf20b24bb0106ac52aa2 upstream.
There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.
Signed-off-by: Changfeng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 10 +++++++---
drivers/gpu/drm/amd/amdgpu/soc15.c | 2 --
2 files changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -4864,7 +4864,7 @@ static void gfx_v9_0_update_3d_clock_gat
amdgpu_gfx_rlc_enter_safe_mode(adev);
/* Enable 3D CGCG/CGLS */
- if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)) {
+ if (enable) {
/* write cmd to clear cgcg/cgls ov */
def = data = RREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE);
/* unset CGCG override */
@@ -4876,8 +4876,12 @@ static void gfx_v9_0_update_3d_clock_gat
/* enable 3Dcgcg FSM(0x0000363f) */
def = RREG32_SOC15(GC, 0, mmRLC_CGCG_CGLS_CTRL_3D);
- data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
- RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+ if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)
+ data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
+ RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+ else
+ data = 0x0 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT;
+
if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGLS)
data |= (0x000F << RLC_CGCG_CGLS_CTRL_3D__CGLS_REP_COMPANSAT_DELAY__SHIFT) |
RLC_CGCG_CGLS_CTRL_3D__CGLS_EN_MASK;
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1151,7 +1151,6 @@ static int soc15_common_early_init(void
adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
AMD_CG_SUPPORT_GFX_MGLS |
AMD_CG_SUPPORT_GFX_CP_LS |
- AMD_CG_SUPPORT_GFX_3D_CGCG |
AMD_CG_SUPPORT_GFX_3D_CGLS |
AMD_CG_SUPPORT_GFX_CGCG |
AMD_CG_SUPPORT_GFX_CGLS |
@@ -1170,7 +1169,6 @@ static int soc15_common_early_init(void
AMD_CG_SUPPORT_GFX_MGLS |
AMD_CG_SUPPORT_GFX_RLC_LS |
AMD_CG_SUPPORT_GFX_CP_LS |
- AMD_CG_SUPPORT_GFX_3D_CGCG |
AMD_CG_SUPPORT_GFX_3D_CGLS |
AMD_CG_SUPPORT_GFX_CGCG |
AMD_CG_SUPPORT_GFX_CGLS |
From: Christophe JAILLET <[email protected]>
commit 3ee098f96b8b6c1a98f7f97915f8873164e6af9d upstream.
If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.
In such a case, we need to free the buffer explicitly.
Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use")
Cc: stable <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/4fdaff557deef6f0475d02ba7922ddbaa1ab08a6.1620544055.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uio/uio_hv_generic.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -296,8 +296,10 @@ hv_uio_probe(struct hv_device *dev,
ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
RECV_BUFFER_SIZE, &pdata->recv_gpadl);
- if (ret)
+ if (ret) {
+ vfree(pdata->recv_buf);
goto fail_close;
+ }
/* put Global Physical Address Label in name */
snprintf(pdata->recv_name, sizeof(pdata->recv_name),
@@ -316,8 +318,10 @@ hv_uio_probe(struct hv_device *dev,
ret = vmbus_establish_gpadl(channel, pdata->send_buf,
SEND_BUFFER_SIZE, &pdata->send_gpadl);
- if (ret)
+ if (ret) {
+ vfree(pdata->send_buf);
goto fail_close;
+ }
snprintf(pdata->send_name, sizeof(pdata->send_name),
"send:%u", pdata->send_gpadl);
From: Tom Lendacky <[email protected]>
commit a50c5bebc99c525e7fbc059988c6a5ab8680cb76 upstream.
Since the VMGEXIT instruction can be issued from userspace, invalidate
the GHCB after performing VMGEXIT processing in the kernel.
Invalidation is only required after userspace is available, so call
vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate()
to additionally clear the GHCB exit code so that it is always presented
as 0 when VMGEXIT has been issued by anything else besides the kernel.
Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/5a8130462e4f0057ee1184509cd056eedd78742b.1621273353.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/sev-es-shared.c | 1 +
arch/x86/kernel/sev-es.c | 5 +++++
2 files changed, 6 insertions(+)
--- a/arch/x86/kernel/sev-es-shared.c
+++ b/arch/x86/kernel/sev-es-shared.c
@@ -63,6 +63,7 @@ static bool sev_es_negotiate_protocol(vo
static __always_inline void vc_ghcb_invalidate(struct ghcb *ghcb)
{
+ ghcb->save.sw_exit_code = 0;
memset(ghcb->save.valid_bitmap, 0, sizeof(ghcb->save.valid_bitmap));
}
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -430,6 +430,11 @@ static __always_inline void sev_es_put_g
data->backup_ghcb_active = false;
state->ghcb = NULL;
} else {
+ /*
+ * Invalidate the GHCB so a VMGEXIT instruction issued
+ * from userspace won't appear to be valid.
+ */
+ vc_ghcb_invalidate(ghcb);
data->ghcb_active = false;
}
}
From: Takashi Sakamoto <[email protected]>
commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f upstream.
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Cc: <[email protected]>
Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/Kconfig | 4 ++--
sound/firewire/bebob/bebob.c | 2 +-
sound/firewire/oxfw/oxfw.c | 1 -
3 files changed, 3 insertions(+), 4 deletions(-)
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -38,7 +38,7 @@ config SND_OXFW
* Mackie(Loud) Onyx 1640i (former model)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
- * Mackie(Loud) d.2 pro/d.4 pro
+ * Mackie(Loud) d.4 pro
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
* Stanton Controllers & Systems 1 Deck/Mixer
@@ -84,7 +84,7 @@ config SND_BEBOB
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
- * Mackie d.2 (FireWire Option)
+ * Mackie d.2 (FireWire Option) and d.2 Pro
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -387,7 +387,7 @@ static const struct ieee1394_device_id b
SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
- /* Mackie, d.2 (Firewire Option) */
+ // Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
/* Stanton, ScratchAmp */
SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -355,7 +355,6 @@ static const struct ieee1394_device_id o
* Onyx-i series (former models): 0x081216
* Mackie Onyx Satellite: 0x00200f
* Tapco LINK.firewire 4x6: 0x000460
- * d.2 pro: Unknown
* d.4 pro: Unknown
* U.420: Unknown
* U.420d: Unknown
From: PeiSen Hou <[email protected]>
commit 1d5cfca286178ce81fb0c8a5f5777ef123cd69e4 upstream.
Fix "use as headset mic, without its own jack detect" problen.
Signed-off-by: PeiSen Hou <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8319,12 +8319,19 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1558, 0x50b8, "Clevo NK50SZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50d5, "Clevo NP50D5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50f0, "Clevo NH50A[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x50f2, "Clevo NH50E[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x50f3, "Clevo NH58DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x50f5, "Clevo NH55EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x50f6, "Clevo NH55DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x5101, "Clevo S510WU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x5157, "Clevo W517GU1", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x51a1, "Clevo NS50MU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x70a1, "Clevo NB70T[HJK]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x70b3, "Clevo NK70SB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x70f2, "Clevo NH79EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x70f3, "Clevo NH77DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
@@ -8342,9 +8349,17 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1558, 0x8a51, "Clevo NH70RCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x8d50, "Clevo NH55RCQ-M", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x951d, "Clevo N950T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0x9600, "Clevo N960K[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x961d, "Clevo N960S[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL53RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL5XNU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xb022, "Clevo NH77D[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xc018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xc019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1558, 0xc022, "Clevo NH77[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS),
SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
From: Takashi Sakamoto <[email protected]>
commit 395f41e2cdac63e7581fb9574e5ac0f02556e34a upstream.
The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.
Cc: <[email protected]>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/amdtp-stream.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -633,18 +633,24 @@ static int parse_ir_ctx_header(struct am
unsigned int *syt, unsigned int packet_index, unsigned int index)
{
const __be32 *cip_header;
+ unsigned int cip_header_size;
int err;
*payload_length = be32_to_cpu(ctx_header[0]) >> ISO_DATA_LENGTH_SHIFT;
- if (*payload_length > s->ctx_data.tx.ctx_header_size +
- s->ctx_data.tx.max_ctx_payload_length) {
+
+ if (!(s->flags & CIP_NO_HEADER))
+ cip_header_size = 8;
+ else
+ cip_header_size = 0;
+
+ if (*payload_length > cip_header_size + s->ctx_data.tx.max_ctx_payload_length) {
dev_err(&s->unit->device,
"Detect jumbo payload: %04x %04x\n",
- *payload_length, s->ctx_data.tx.max_ctx_payload_length);
+ *payload_length, cip_header_size + s->ctx_data.tx.max_ctx_payload_length);
return -EIO;
}
- if (!(s->flags & CIP_NO_HEADER)) {
+ if (cip_header_size > 0) {
cip_header = ctx_header + 2;
err = check_cip_header(s, cip_header, *payload_length,
data_blocks, data_block_counter, syt);
From: Nicholas Piggin <[email protected]>
[ Upstream commit 2c8c89b95831f46a2fb31a8d0fef4601694023ce ]
The paravit queued spinlock slow path adds itself to the queue then
calls pv_wait to wait for the lock to become free. This is implemented
by calling H_CONFER to donate cycles.
When hcall tracing is enabled, this H_CONFER call can lead to a spin
lock being taken in the tracing code, which will result in the lock to
be taken again, which will also go to the slow path because it queues
behind itself and so won't ever make progress.
An example trace of a deadlock:
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_hcall_exit
__trace_hcall_exit
plpar_hcall_norets_trace
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_rcu_dyntick
rcu_irq_exit
irq_exit
__do_irq
call_do_irq
do_IRQ
hardware_interrupt_common_virt
Fix this by introducing plpar_hcall_norets_notrace(), and using that to
make SPLPAR virtual processor dispatching hcalls by the paravirt
spinlock code.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/hvcall.h | 3 +++
arch/powerpc/include/asm/paravirt.h | 22 +++++++++++++++++++---
arch/powerpc/platforms/pseries/hvCall.S | 10 ++++++++++
arch/powerpc/platforms/pseries/lpar.c | 3 +--
4 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index ed6086d57b22..0c92b01a3c3c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -446,6 +446,9 @@
*/
long plpar_hcall_norets(unsigned long opcode, ...);
+/* Variant which does not do hcall tracing */
+long plpar_hcall_norets_notrace(unsigned long opcode, ...);
+
/**
* plpar_hcall: - Make a pseries hypervisor call
* @opcode: The hypervisor call to make.
diff --git a/arch/powerpc/include/asm/paravirt.h b/arch/powerpc/include/asm/paravirt.h
index 5d1726bb28e7..bcb7b5f917be 100644
--- a/arch/powerpc/include/asm/paravirt.h
+++ b/arch/powerpc/include/asm/paravirt.h
@@ -28,19 +28,35 @@ static inline u32 yield_count_of(int cpu)
return be32_to_cpu(yield_count);
}
+/*
+ * Spinlock code confers and prods, so don't trace the hcalls because the
+ * tracing code takes spinlocks which can cause recursion deadlocks.
+ *
+ * These calls are made while the lock is not held: the lock slowpath yields if
+ * it can not acquire the lock, and unlock slow path might prod if a waiter has
+ * yielded). So this may not be a problem for simple spin locks because the
+ * tracing does not technically recurse on the lock, but we avoid it anyway.
+ *
+ * However the queued spin lock contended path is more strictly ordered: the
+ * H_CONFER hcall is made after the task has queued itself on the lock, so then
+ * recursing on that lock will cause the task to then queue up again behind the
+ * first instance (or worse: queued spinlocks use tricks that assume a context
+ * never waits on more than one spinlock, so such recursion may cause random
+ * corruption in the lock code).
+ */
static inline void yield_to_preempted(int cpu, u32 yield_count)
{
- plpar_hcall_norets(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
+ plpar_hcall_norets_notrace(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
}
static inline void prod_cpu(int cpu)
{
- plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+ plpar_hcall_norets_notrace(H_PROD, get_hard_smp_processor_id(cpu));
}
static inline void yield_to_any(void)
{
- plpar_hcall_norets(H_CONFER, -1, 0);
+ plpar_hcall_norets_notrace(H_CONFER, -1, 0);
}
#else
static inline bool is_shared_processor(void)
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 2136e42833af..8a2b8d64265b 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -102,6 +102,16 @@ END_FTR_SECTION(0, 1); \
#define HCALL_BRANCH(LABEL)
#endif
+_GLOBAL_TOC(plpar_hcall_norets_notrace)
+ HMT_MEDIUM
+
+ mfcr r0
+ stw r0,8(r1)
+ HVSC /* invoke the hypervisor */
+ lwz r0,8(r1)
+ mtcrf 0xff,r0
+ blr /* return r3 = status */
+
_GLOBAL_TOC(plpar_hcall_norets)
HMT_MEDIUM
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index cd38bd421f38..d4aa6a46e1fa 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -1830,8 +1830,7 @@ void hcall_tracepoint_unregfunc(void)
/*
* Since the tracing code might execute hcalls we need to guard against
- * recursion. One example of this are spinlocks calling H_YIELD on
- * shared processor partitions.
+ * recursion.
*/
static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
--
2.30.2
From: Filipe Manana <[email protected]>
commit 54a40fc3a1da21b52dbf19f72fdc27a2ec740760 upstream.
When we move one inode from one directory to another and both the inode
and its previous parent directory were logged before, we are not supposed
to have the dentry for the old parent if we have a power failure after the
log is synced. Only the new dentry is supposed to exist.
Generally this works correctly, however there is a scenario where this is
not currently working, because the old parent of the file/directory that
was moved is not authoritative for a range that includes the dir index and
dir item keys of the old dentry. This case is better explained with the
following example and reproducer:
# The test requires a very specific layout of keys and items in the
# fs/subvolume btree to trigger the bug. So we want to make sure that
# on whatever platform we are, we have the same leaf/node size.
#
# Currently in btrfs the node/leaf size can not be smaller than the page
# size (but it can be greater than the page size). So use the largest
# supported node/leaf size (64K).
$ mkfs.btrfs -f -n 65536 /dev/sdc
$ mount /dev/sdc /mnt
# "testdir" is inode 257.
$ mkdir /mnt/testdir
$ chmod 755 /mnt/testdir
# Create several empty files to have the directory "testdir" with its
# items spread over several leaves (7 in this case).
$ for ((i = 1; i <= 1200; i++)); do
echo -n > /mnt/testdir/file$i
done
# Create our test directory "dira", inode number 1458, which gets all
# its items in leaf 7.
#
# The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to
# the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY
# item that points to that entry is in leaf 3.
#
# For this particular filesystem node size (64K), file count and file
# names, we endup with the directory entry items from inode 257 in
# leaves 2 and 3, as previously mentioned - what matters for triggering
# the bug exercised by this test case is that those items are not placed
# in leaf 1, they must be placed in a leaf different from the one
# containing the inode item for inode 257.
#
# The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for
# the parent inode (257) are the following:
#
# item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
#
# and:
#
# item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
$ mkdir /mnt/testdir/dira
# Make sure everything done so far is durably persisted.
$ sync
# Now do a change to inode 257 ("testdir") that does not result in
# COWing leaves 2 and 3 - the leaves that contain the directory items
# pointing to inode 1458 (directory "dira").
#
# Changing permissions, the owner/group, updating or adding a xattr,
# etc, will not change (COW) leaves 2 and 3. So for the sake of
# simplicity change the permissions of inode 257, which results in
# updating its inode item and therefore change (COW) only leaf 1.
$ chmod 700 /mnt/testdir
# Now fsync directory inode 257.
#
# Since only the first leaf was changed/COWed, we log the inode item of
# inode 257 and only the dentries found in the first leaf, all have a
# key type of BTRFS_DIR_ITEM_KEY, and no keys of type
# BTRFS_DIR_INDEX_KEY, because they sort after the former type and none
# exist in the first leaf.
#
# We also log 3 items that represent ranges for dir items and dir
# indexes for which the log is authoritative:
#
# 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [0, 2285968570] (the offset here is the crc32c of the
# dentry's name). The value 2285968570 corresponds to the offset of
# the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
#
# 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [4293818216, (u64)-1] (the offset here is the crc32c
# of the dentry's name). The value 4293818216 corresponds to the
# offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1
# (4293818215 + 1), which is located in leaf 2;
#
# 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203,
# which indicates the log is authoritative for all keys of type
# BTRFS_DIR_INDEX_KEY that have an offset in the range
# [1203, (u64)-1]. The value 1203 corresponds to the offset of the
# last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is
# located in leaf 3;
#
# Also, because "testdir" is a directory and inode 1458 ("dira") is a
# child directory, we log inode 1458 too.
$ xfs_io -c "fsync" /mnt/testdir
# Now move "dira", inode 1458, to be a child of the root directory
# (inode 256).
#
# Because this inode was previously logged, when "testdir" was fsynced,
# the log is updated so that the old inode reference, referring to inode
# 257 as the parent, is deleted and the new inode reference, referring
# to inode 256 as the parent, is added to the log.
$ mv /mnt/testdir/dira /mnt
# Now change some file and fsync it. This guarantees the log changes
# made by the previous move/rename operation are persisted. We do not
# need to do any special modification to the file, just any change to
# any file and sync the log.
$ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/testdir/file1
# Simulate a power failure and then mount again the filesystem to
# replay the log tree. We want to verify that we are able to mount the
# filesystem, meaning log replay was successful, and that directory
# inode 1458 ("dira") only has inode 256 (the filesystem's root) as
# its parent (and no longer a child of inode 257).
#
# It used to happen that during log replay we would end up having
# inode 1458 (directory "dira") with 2 hard links, being a child of
# inode 257 ("testdir") and inode 256 (the filesystem's root). This
# resulted in the tree checker detecting the issue and causing the
# mount operation to fail (with -EIO).
#
# This happened because in the log we have the new name/parent for
# inode 1458, which results in adding the new dentry with inode 256
# as the parent, but the previous dentry, under inode 257 was never
# removed - this is because the ranges for dir items and dir indexes
# of inode 257 for which the log is authoritative do not include the
# old dir item and dir index for the dentry of inode 257 referring to
# inode 1458:
#
# - for dir items, the log is authoritative for the ranges
# [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257
# pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as
# previously mentioned, so the dir item is not deleted when the log
# replay procedure processes the authoritative ranges, as 3724298081
# is outside both ranges;
#
# - for dir indexes, the log is authoritative for the range
# [1203, (u64)-1], and the dir index item of inode 257 pointing to
# inode 1458 has a key of (257 DIR_INDEX 1202), as previously
# mentioned, so the dir index item is not deleted when the log
# replay procedure processes the authoritative range.
<power failure>
$ mount /dev/sdc /mnt
mount: /mnt: can't read superblock on /dev/sdc.
$ dmesg
(...)
[87849.840509] BTRFS info (device sdc): start tree-log replay
[87849.875719] BTRFS critical (device sdc): corrupt leaf: root=5 block=30539776 slot=554 ino=1458, invalid nlink: has 2 expect no more than 1 for dir
[87849.878084] BTRFS info (device sdc): leaf 30539776 gen 7 total ptrs 557 free space 2092 owner 5
[87849.879516] BTRFS info (device sdc): refs 1 lock_owner 0 current 2099108
[87849.880613] item 0 key (1181 1 0) itemoff 65275 itemsize 160
[87849.881544] inode generation 6 size 0 mode 100644
[87849.882692] item 1 key (1181 12 257) itemoff 65258 itemsize 17
(...)
[87850.562549] item 556 key (1458 12 257) itemoff 16017 itemsize 14
[87850.563349] BTRFS error (device dm-0): block=30539776 write time tree block corruption detected
[87850.564386] ------------[ cut here ]------------
[87850.564920] WARNING: CPU: 3 PID: 2099108 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs]
[87850.566129] Modules linked in: btrfs dm_zero dm_snapshot (...)
[87850.573789] CPU: 3 PID: 2099108 Comm: mount Not tainted 5.12.0-rc8-btrfs-next-86 #1
(...)
[87850.587481] Call Trace:
[87850.587768] btree_csum_one_bio+0x244/0x2b0 [btrfs]
[87850.588354] ? btrfs_bio_fits_in_stripe+0xd8/0x110 [btrfs]
[87850.589003] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs]
[87850.589654] submit_one_bio+0x61/0x70 [btrfs]
[87850.590248] submit_extent_page+0x91/0x2f0 [btrfs]
[87850.590842] write_one_eb+0x175/0x440 [btrfs]
[87850.591370] ? find_extent_buffer_nolock+0x1c0/0x1c0 [btrfs]
[87850.592036] btree_write_cache_pages+0x1e6/0x610 [btrfs]
[87850.592665] ? free_debug_processing+0x1d5/0x240
[87850.593209] do_writepages+0x43/0xf0
[87850.593798] ? __filemap_fdatawrite_range+0xa4/0x100
[87850.594391] __filemap_fdatawrite_range+0xc5/0x100
[87850.595196] btrfs_write_marked_extents+0x68/0x160 [btrfs]
[87850.596202] btrfs_write_and_wait_transaction.isra.0+0x4d/0xd0 [btrfs]
[87850.597377] btrfs_commit_transaction+0x794/0xca0 [btrfs]
[87850.598455] ? _raw_spin_unlock_irqrestore+0x32/0x60
[87850.599305] ? kmem_cache_free+0x15a/0x3d0
[87850.600029] btrfs_recover_log_trees+0x346/0x380 [btrfs]
[87850.601021] ? replay_one_extent+0x7d0/0x7d0 [btrfs]
[87850.601988] open_ctree+0x13c9/0x1698 [btrfs]
[87850.602846] btrfs_mount_root.cold+0x13/0xed [btrfs]
[87850.603771] ? kmem_cache_alloc_trace+0x7c9/0x930
[87850.604576] ? vfs_parse_fs_string+0x5d/0xb0
[87850.605293] ? kfree+0x276/0x3f0
[87850.605857] legacy_get_tree+0x30/0x50
[87850.606540] vfs_get_tree+0x28/0xc0
[87850.607163] fc_mount+0xe/0x40
[87850.607695] vfs_kern_mount.part.0+0x71/0x90
[87850.608440] btrfs_mount+0x13b/0x3e0 [btrfs]
(...)
[87850.629477] ---[ end trace 68802022b99a1ea0 ]---
[87850.630849] BTRFS: error (device sdc) in btrfs_commit_transaction:2381: errno=-5 IO failure (Error while writing out transaction)
[87850.632422] BTRFS warning (device sdc): Skipping commit of aborted transaction.
[87850.633416] BTRFS: error (device sdc) in cleanup_transaction:1978: errno=-5 IO failure
[87850.634553] BTRFS: error (device sdc) in btrfs_replay_log:2431: errno=-5 IO failure (Failed to recover log tree)
[87850.637529] BTRFS error (device sdc): open_ctree failed
In this example the inode we moved was a directory, so it was easy to
detect the problem because directories can only have one hard link and
the tree checker immediately detects that. If the moved inode was a file,
then the log replay would succeed and we would end up having both the
new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present,
but only the new one should be present.
Fix this by forcing re-logging of the old parent directory when logging
the new name during a rename operation. This ensures we end up with a log
that is authoritative for a range covering the keys for the old dentry,
therefore causing the old dentry do be deleted when replaying the log.
A test case for fstests will follow up soon.
Fixes: 64d6b281ba4db0 ("btrfs: remove unnecessary check_parent_dirs_for_sync()")
CC: [email protected] # 5.12+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -6457,6 +6457,24 @@ void btrfs_log_new_name(struct btrfs_tra
(!old_dir || old_dir->logged_trans < trans->transid))
return;
+ /*
+ * If we are doing a rename (old_dir is not NULL) from a directory that
+ * was previously logged, make sure the next log attempt on the directory
+ * is not skipped and logs the inode again. This is because the log may
+ * not currently be authoritative for a range including the old
+ * BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY keys, so we want to make
+ * sure after a log replay we do not end up with both the new and old
+ * dentries around (in case the inode is a directory we would have a
+ * directory with two hard links and 2 inode references for different
+ * parents). The next log attempt of old_dir will happen at
+ * btrfs_log_all_parents(), called through btrfs_log_inode_parent()
+ * below, because we have previously set inode->last_unlink_trans to the
+ * current transaction ID, either here or at btrfs_record_unlink_dir() in
+ * case inode is a directory.
+ */
+ if (old_dir)
+ old_dir->logged_trans = 0;
+
btrfs_init_log_ctx(&ctx, &inode->vfs_inode);
ctx.logging_new_name = true;
/*
From: Ronnie Sahlberg <[email protected]>
commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream.
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1822,6 +1822,8 @@ smb2_copychunk_range(const unsigned int
cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
/* Request server copy to target from src identified by key */
+ kfree(retbuf);
+ retbuf = NULL;
rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
true /* is_fsctl */, (char *)pcchunk,
From: Yang Yingliang <[email protected]>
[ Upstream commit 4d1cd3b2c5c1c32826454de3a18c6183238d47ed ]
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <[email protected]>
Cc: Chris Kennelly <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/exec/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile
index cf69b2fcce59..dd61118df66e 100644
--- a/tools/testing/selftests/exec/Makefile
+++ b/tools/testing/selftests/exec/Makefile
@@ -28,8 +28,8 @@ $(OUTPUT)/execveat.denatured: $(OUTPUT)/execveat
cp $< $@
chmod -x $@
$(OUTPUT)/load_address_4096: load_address.c
- $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000 -pie $< -o $@
+ $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000 -pie -static $< -o $@
$(OUTPUT)/load_address_2097152: load_address.c
- $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x200000 -pie $< -o $@
+ $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x200000 -pie -static $< -o $@
$(OUTPUT)/load_address_16777216: load_address.c
- $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000000 -pie $< -o $@
+ $(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000000 -pie -static $< -o $@
--
2.30.2
From: Christophe JAILLET <[email protected]>
commit 0b0226be3a52dadd965644bc52a807961c2c26df upstream.
Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe
function is never freed in the error handling path.
Add the missing 'vmbus_free_ring()' call.
Note that it is already freed in the .remove function.
Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use")
Cc: stable <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/0d86027b8eeed8e6360bc3d52bcdb328ff9bdca1.1620544055.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uio/uio_hv_generic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -291,7 +291,7 @@ hv_uio_probe(struct hv_device *dev,
pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE);
if (pdata->recv_buf == NULL) {
ret = -ENOMEM;
- goto fail_close;
+ goto fail_free_ring;
}
ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
@@ -351,6 +351,8 @@ hv_uio_probe(struct hv_device *dev,
fail_close:
hv_uio_cleanup(dev, pdata);
+fail_free_ring:
+ vmbus_free_ring(dev->channel);
return ret;
}
From: Oleg Nesterov <[email protected]>
[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]
Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does
ptrace(PTRACE_CONT, T);
ptrace(PTRACE_CONT, L);
If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.
This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.
The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:
- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
and the tracer does a ptrace request without having consumed
the exec event, it's 100% sure that the thread the ptracer
thinks it is targeting does not exist anymore, or isn't the
same as the one it thinks it is targeting.
- To some degree this patch adds nothing new. In the scenario
above ptrace(L) can fail with -ESRCH if it is called after the
execing sub-thread wakes the leader up and before it "steals"
the leader's pid.
Test-case:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <errno.h>
#include <pthread.h>
#include <assert.h>
void *tf(void *arg)
{
execve("/usr/bin/true", NULL, NULL);
assert(0);
return NULL;
}
int main(void)
{
int leader = fork();
if (!leader) {
kill(getpid(), SIGSTOP);
pthread_t th;
pthread_create(&th, NULL, tf, NULL);
for (;;)
pause();
return 0;
}
waitpid(leader, NULL, WSTOPPED);
ptrace(PTRACE_SEIZE, leader, 0,
PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
waitpid(leader, NULL, 0);
ptrace(PTRACE_CONT, leader, 0,0);
waitpid(leader, NULL, 0);
int status, thread = waitpid(-1, &status, 0);
assert(thread > 0 && thread != leader);
assert(status == 0x80137f);
ptrace(PTRACE_CONT, thread, 0,0);
/*
* waitid() because waitpid(leader, &status, WNOWAIT) does not
* report status. Why ????
*
* Why WEXITED? because we have another kernel problem connected
* to mt-exec.
*/
siginfo_t info;
assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
assert(info.si_pid == leader && info.si_status == 0x0405);
/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
assert(errno == ESRCH);
assert(leader == waitpid(leader, &status, WNOHANG));
assert(status == 0x04057f);
assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);
return 0;
}
Signed-off-by: Oleg Nesterov <[email protected]>
Reported-by: Simon Marchi <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Acked-by: Pedro Alves <[email protected]>
Acked-by: Simon Marchi <[email protected]>
Acked-by: Jan Kratochvil <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/ptrace.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 61db50f7ca86..5f50fdd1d855 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -169,6 +169,21 @@ void __ptrace_unlink(struct task_struct *child)
spin_unlock(&child->sighand->siglock);
}
+static bool looks_like_a_spurious_pid(struct task_struct *task)
+{
+ if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP))
+ return false;
+
+ if (task_pid_vnr(task) == task->ptrace_message)
+ return false;
+ /*
+ * The tracee changed its pid but the PTRACE_EVENT_EXEC event
+ * was not wait()'ed, most probably debugger targets the old
+ * leader which was destroyed in de_thread().
+ */
+ return true;
+}
+
/* Ensure that nothing can wake it up, even SIGKILL */
static bool ptrace_freeze_traced(struct task_struct *task)
{
@@ -179,7 +194,8 @@ static bool ptrace_freeze_traced(struct task_struct *task)
return ret;
spin_lock_irq(&task->sighand->siglock);
- if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+ if (task_is_traced(task) && !looks_like_a_spurious_pid(task) &&
+ !__fatal_signal_pending(task)) {
task->state = __TASK_TRACED;
ret = true;
}
--
2.30.2
From: Joerg Roedel <[email protected]>
commit b250f2f7792d15bcde98e0456781e2835556d5fa upstream.
sev_es_get_ghcb() is called from several places but only one of them
checks the return value. The reaction to returning NULL is always the
same: calling panic() and kill the machine.
Instead of adding checks to all call sites, move the panic() into the
function itself so that it will no longer return NULL.
Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected] # v5.10+
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/sev-es.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -191,8 +191,18 @@ static __always_inline struct ghcb *sev_
if (unlikely(data->ghcb_active)) {
/* GHCB is already in use - save its contents */
- if (unlikely(data->backup_ghcb_active))
- return NULL;
+ if (unlikely(data->backup_ghcb_active)) {
+ /*
+ * Backup-GHCB is also already in use. There is no way
+ * to continue here so just kill the machine. To make
+ * panic() work, mark GHCBs inactive so that messages
+ * can be printed out.
+ */
+ data->ghcb_active = false;
+ data->backup_ghcb_active = false;
+
+ panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
+ }
/* Mark backup_ghcb active before writing to it */
data->backup_ghcb_active = true;
@@ -1262,7 +1272,6 @@ static __always_inline bool on_vc_fallba
*/
DEFINE_IDTENTRY_VC_SAFE_STACK(exc_vmm_communication)
{
- struct sev_es_runtime_data *data = this_cpu_read(runtime_data);
irqentry_state_t irq_state;
struct ghcb_state state;
struct es_em_ctxt ctxt;
@@ -1288,16 +1297,6 @@ DEFINE_IDTENTRY_VC_SAFE_STACK(exc_vmm_co
*/
ghcb = sev_es_get_ghcb(&state);
- if (!ghcb) {
- /*
- * Mark GHCBs inactive so that panic() is able to print the
- * message.
- */
- data->ghcb_active = false;
- data->backup_ghcb_active = false;
-
- panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
- }
vc_ghcb_invalidate(ghcb);
result = vc_init_em_ctxt(&ctxt, regs, error_code);
From: Johannes Thumshirn <[email protected]>
commit 764c7c9a464b68f7c6a5a9ec0b923176a05e8e8f upstream.
When multiple processes write data to the same block group on a
compressed zoned filesystem, the underlying device could report I/O
errors and data corruption is possible.
This happens because on a zoned file system, compressed data writes
where sent to the device via a REQ_OP_WRITE instead of a
REQ_OP_ZONE_APPEND operation. But with REQ_OP_WRITE and parallel
submission it cannot be guaranteed that the data is always submitted
aligned to the underlying zone's write pointer.
The change to using REQ_OP_ZONE_APPEND instead of REQ_OP_WRITE on a
zoned filesystem is non intrusive on a regular file system or when
submitting to a conventional zone on a zoned filesystem, as it is
guarded by btrfs_use_zone_append.
Reported-by: David Sterba <[email protected]>
Fixes: 9d294a685fbc ("btrfs: zoned: enable to mount ZONED incompat flag")
CC: [email protected] # 5.12.x: e380adfc213a13: btrfs: zoned: pass start block to btrfs_use_zone_append
CC: [email protected] # 5.12.x
Signed-off-by: Johannes Thumshirn <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/compression.c | 42 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 38 insertions(+), 4 deletions(-)
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -28,6 +28,7 @@
#include "compression.h"
#include "extent_io.h"
#include "extent_map.h"
+#include "zoned.h"
static const char* const btrfs_compress_types[] = { "", "zlib", "lzo", "zstd" };
@@ -349,6 +350,7 @@ static void end_compressed_bio_write(str
*/
inode = cb->inode;
cb->compressed_pages[0]->mapping = cb->inode->i_mapping;
+ btrfs_record_physical_zoned(inode, cb->start, bio);
btrfs_writepage_endio_finish_ordered(cb->compressed_pages[0],
cb->start, cb->start + cb->len - 1,
bio->bi_status == BLK_STS_OK);
@@ -401,6 +403,8 @@ blk_status_t btrfs_submit_compressed_wri
u64 first_byte = disk_start;
blk_status_t ret;
int skip_sum = inode->flags & BTRFS_INODE_NODATASUM;
+ const bool use_append = btrfs_use_zone_append(inode, disk_start);
+ const unsigned int bio_op = use_append ? REQ_OP_ZONE_APPEND : REQ_OP_WRITE;
WARN_ON(!PAGE_ALIGNED(start));
cb = kmalloc(compressed_bio_size(fs_info, compressed_len), GFP_NOFS);
@@ -418,10 +422,31 @@ blk_status_t btrfs_submit_compressed_wri
cb->nr_pages = nr_pages;
bio = btrfs_bio_alloc(first_byte);
- bio->bi_opf = REQ_OP_WRITE | write_flags;
+ bio->bi_opf = bio_op | write_flags;
bio->bi_private = cb;
bio->bi_end_io = end_compressed_bio_write;
+ if (use_append) {
+ struct extent_map *em;
+ struct map_lookup *map;
+ struct block_device *bdev;
+
+ em = btrfs_get_chunk_map(fs_info, disk_start, PAGE_SIZE);
+ if (IS_ERR(em)) {
+ kfree(cb);
+ bio_put(bio);
+ return BLK_STS_NOTSUPP;
+ }
+
+ map = em->map_lookup;
+ /* We only support single profile for now */
+ ASSERT(map->num_stripes == 1);
+ bdev = map->stripes[0].dev->bdev;
+
+ bio_set_dev(bio, bdev);
+ free_extent_map(em);
+ }
+
if (blkcg_css) {
bio->bi_opf |= REQ_CGROUP_PUNT;
kthread_associate_blkcg(blkcg_css);
@@ -432,6 +457,7 @@ blk_status_t btrfs_submit_compressed_wri
bytes_left = compressed_len;
for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) {
int submit = 0;
+ int len;
page = compressed_pages[pg_index];
page->mapping = inode->vfs_inode.i_mapping;
@@ -439,9 +465,13 @@ blk_status_t btrfs_submit_compressed_wri
submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio,
0);
+ if (pg_index == 0 && use_append)
+ len = bio_add_zone_append_page(bio, page, PAGE_SIZE, 0);
+ else
+ len = bio_add_page(bio, page, PAGE_SIZE, 0);
+
page->mapping = NULL;
- if (submit || bio_add_page(bio, page, PAGE_SIZE, 0) <
- PAGE_SIZE) {
+ if (submit || len < PAGE_SIZE) {
/*
* inc the count before we submit the bio so
* we know the end IO handler won't happen before
@@ -465,11 +495,15 @@ blk_status_t btrfs_submit_compressed_wri
}
bio = btrfs_bio_alloc(first_byte);
- bio->bi_opf = REQ_OP_WRITE | write_flags;
+ bio->bi_opf = bio_op | write_flags;
bio->bi_private = cb;
bio->bi_end_io = end_compressed_bio_write;
if (blkcg_css)
bio->bi_opf |= REQ_CGROUP_PUNT;
+ /*
+ * Use bio_add_page() to ensure the bio has at least one
+ * page.
+ */
bio_add_page(bio, page, PAGE_SIZE, 0);
}
if (bytes_left < PAGE_SIZE) {
From: Like Xu <[email protected]>
[ Upstream commit 3317c26a4b413b41364f2c4b83c778c6aba1576d ]
The Architecture LBR does not have MSR_LBR_TOS (0x000001c9).
In a guest that should support Architecture LBR, check_msr()
will be a non-related check for the architecture MSR 0x0
(IA32_P5_MC_ADDR) that is also not supported by KVM.
The failure will cause x86_pmu.lbr_nr = 0, thereby preventing
the initialization of the guest Arch LBR. Fix it by avoiding
this extraneous check in intel_pmu_init() for Arch LBR.
Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Like Xu <[email protected]>
[peterz: simpler still]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index c57ec8e27907..4c18e7fb58f5 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -5741,7 +5741,7 @@ __init int intel_pmu_init(void)
* Check all LBT MSR here.
* Disable LBR access if any LBR MSRs can not be accessed.
*/
- if (x86_pmu.lbr_nr && !check_msr(x86_pmu.lbr_tos, 0x3UL))
+ if (x86_pmu.lbr_tos && !check_msr(x86_pmu.lbr_tos, 0x3UL))
x86_pmu.lbr_nr = 0;
for (i = 0; i < x86_pmu.lbr_nr; i++) {
if (!(check_msr(x86_pmu.lbr_from + i, 0xffffUL) &&
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit 115726c5d312b462c9d9931ea42becdfa838a076 ]
Our code analyzer reported a uaf.
In gaudi_memset_device_memory, cb is get via hl_cb_kernel_create()
with 2 refcount.
If hl_cs_allocate_job() failed, the execution runs into release_cb
branch. One ref of cb is dropped by hl_cb_put(cb) and could be freed
if other thread also drops one ref. Then cb is used by cb->id later,
which is a potential uaf.
My patch add a variable 'id' to accept the value of cb->id before the
hl_cb_put(cb) is called, to avoid the potential uaf.
Fixes: 423815bf02e25 ("habanalabs/gaudi: remove PCI access to SM block")
Signed-off-by: Lv Yunlong <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/gaudi/gaudi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 9152242778f5..ecdedd87f8cc 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -5546,6 +5546,7 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
struct hl_cs_job *job;
u32 cb_size, ctl, err_cause;
struct hl_cb *cb;
+ u64 id;
int rc;
cb = hl_cb_kernel_create(hdev, PAGE_SIZE, false);
@@ -5612,8 +5613,9 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
}
release_cb:
+ id = cb->id;
hl_cb_put(cb);
- hl_cb_destroy(hdev, &hdev->kernel_cb_mgr, cb->id << PAGE_SHIFT);
+ hl_cb_destroy(hdev, &hdev->kernel_cb_mgr, id << PAGE_SHIFT);
return rc;
}
--
2.30.2
From: Daniel Wagner <[email protected]>
[ Upstream commit 85428beac80dbcace5b146b218697c73e367dcf5 ]
Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().
The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:
When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:
static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
{
[...]
if (req->ns->file)
return nvmet_file_parse_io_cmd(req);
return nvmet_bdev_parse_io_cmd(req);
}
Reported-by: Enzo Matsumiya <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/io-cmd-file.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 715d4376c997..7fdbdc496597 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -49,9 +49,11 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
ns->file = filp_open(ns->device_path, flags, 0);
if (IS_ERR(ns->file)) {
- pr_err("failed to open file %s: (%ld)\n",
- ns->device_path, PTR_ERR(ns->file));
- return PTR_ERR(ns->file);
+ ret = PTR_ERR(ns->file);
+ pr_err("failed to open file %s: (%d)\n",
+ ns->device_path, ret);
+ ns->file = NULL;
+ return ret;
}
ret = nvmet_file_ns_revalidate(ns);
--
2.30.2
From: Nicolas MURE <[email protected]>
commit 1a2a94a4392d5d1e5e25cc127573452f4c7fa9b8 upstream.
Send an `URB_CONTROL out` USB frame to the device to configure its
samplerate. This should be done before using the device for audio
streaming (capture or playback).
See https://github.com/nm2107/Pioneer-DJM-850-driver-reverse-engineering/blob/172fb9a61055960c88c67b7c416fe5bf3609807b/doc/windows-dvs/framerate-setting/README.md
Signed-off-by: Nicolas MURE <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1511,6 +1511,9 @@ void snd_usb_set_format_quirk(struct snd
case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
pioneer_djm_set_format_quirk(subs, 0x0082);
break;
+ case USB_ID(0x08e4, 0x0163): /* Pioneer DJM-850 */
+ pioneer_djm_set_format_quirk(subs, 0x0086);
+ break;
}
}
From: Maor Gottlieb <[email protected]>
[ Upstream commit 97f30d324ce6645a4de4ffb71e4ae9b8ca36ff04 ]
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue")
Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 4be7bccefaa4..59ffbbdda317 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -4655,6 +4655,7 @@ static int mlx5r_mp_probe(struct auxiliary_device *adev,
if (bound) {
rdma_roce_rescan_device(&dev->ib_dev);
+ mpi->ibdev->ib_active = true;
break;
}
}
--
2.30.2
From: Bart Van Assche <[email protected]>
[ Upstream commit d0b2b70eb12e9ffaf95e11b16b230a4e015a536c ]
With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.
The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.
Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.
In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Cc: Can Guo <[email protected]>
Cc: Alim Akhtar <[email protected]>
Cc: Avri Altman <[email protected]>
Cc: Stanley Chu <[email protected]>
Cc: Bean Huo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Reviewed-by: Can Guo <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0c71a159d08f..e1e510882ff4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2849,7 +2849,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
* ufshcd_exec_dev_cmd - API for sending device management requests
* @hba: UFS hba
* @cmd_type: specifies the type (NOP, Query...)
- * @timeout: time in seconds
+ * @timeout: timeout in milliseconds
*
* NOTE: Since there is only one available tag for device management commands,
* it is expected you hold the hba->dev_cmd.lock mutex.
@@ -2879,6 +2879,9 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
}
tag = req->tag;
WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
+ /* Set the timeout such that the SCSI error handler is not activated. */
+ req->timeout = msecs_to_jiffies(2 * timeout);
+ blk_mq_start_request(req);
init_completion(&wait);
lrbp = &hba->lrb[tag];
--
2.30.2
From: Nicholas Piggin <[email protected]>
commit d72500f992849d31ebae8f821a023660ddd0dcc2 upstream.
The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.
Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: [email protected] # v5.9+
Reported-by: "Dmitry V. Levin" <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Dmitry V. Levin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/ptrace.h | 45 +++++++++++++++++++++----------------
arch/powerpc/include/asm/syscall.h | 42 +++++++++++++++++++++-------------
2 files changed, 52 insertions(+), 35 deletions(-)
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -19,6 +19,7 @@
#ifndef _ASM_POWERPC_PTRACE_H
#define _ASM_POWERPC_PTRACE_H
+#include <linux/err.h>
#include <uapi/asm/ptrace.h>
#include <asm/asm-const.h>
@@ -152,25 +153,6 @@ extern unsigned long profile_pc(struct p
long do_syscall_trace_enter(struct pt_regs *regs);
void do_syscall_trace_leave(struct pt_regs *regs);
-#define kernel_stack_pointer(regs) ((regs)->gpr[1])
-static inline int is_syscall_success(struct pt_regs *regs)
-{
- return !(regs->ccr & 0x10000000);
-}
-
-static inline long regs_return_value(struct pt_regs *regs)
-{
- if (is_syscall_success(regs))
- return regs->gpr[3];
- else
- return -regs->gpr[3];
-}
-
-static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
-{
- regs->gpr[3] = rc;
-}
-
#ifdef __powerpc64__
#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
#else
@@ -252,6 +234,31 @@ static inline void set_trap_norestart(st
regs->trap |= 0x10;
}
+#define kernel_stack_pointer(regs) ((regs)->gpr[1])
+static inline int is_syscall_success(struct pt_regs *regs)
+{
+ if (trap_is_scv(regs))
+ return !IS_ERR_VALUE((unsigned long)regs->gpr[3]);
+ else
+ return !(regs->ccr & 0x10000000);
+}
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ if (trap_is_scv(regs))
+ return regs->gpr[3];
+
+ if (is_syscall_success(regs))
+ return regs->gpr[3];
+ else
+ return -regs->gpr[3];
+}
+
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+ regs->gpr[3] = rc;
+}
+
#define arch_has_single_step() (1)
#define arch_has_block_step() (true)
#define ARCH_HAS_USER_SINGLE_STEP_REPORT
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -41,11 +41,17 @@ static inline void syscall_rollback(stru
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
- /*
- * If the system call failed,
- * regs->gpr[3] contains a positive ERRORCODE.
- */
- return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+ if (trap_is_scv(regs)) {
+ unsigned long error = regs->gpr[3];
+
+ return IS_ERR_VALUE(error) ? error : 0;
+ } else {
+ /*
+ * If the system call failed,
+ * regs->gpr[3] contains a positive ERRORCODE.
+ */
+ return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+ }
}
static inline long syscall_get_return_value(struct task_struct *task,
@@ -58,18 +64,22 @@ static inline void syscall_set_return_va
struct pt_regs *regs,
int error, long val)
{
- /*
- * In the general case it's not obvious that we must deal with CCR
- * here, as the syscall exit path will also do that for us. However
- * there are some places, eg. the signal code, which check ccr to
- * decide if the value in r3 is actually an error.
- */
- if (error) {
- regs->ccr |= 0x10000000L;
- regs->gpr[3] = error;
+ if (trap_is_scv(regs)) {
+ regs->gpr[3] = (long) error ?: val;
} else {
- regs->ccr &= ~0x10000000L;
- regs->gpr[3] = val;
+ /*
+ * In the general case it's not obvious that we must deal with
+ * CCR here, as the syscall exit path will also do that for us.
+ * However there are some places, eg. the signal code, which
+ * check ccr to decide if the value in r3 is actually an error.
+ */
+ if (error) {
+ regs->ccr |= 0x10000000L;
+ regs->gpr[3] = error;
+ } else {
+ regs->ccr &= ~0x10000000L;
+ regs->gpr[3] = val;
+ }
}
}
From: Qiu Wenbo <[email protected]>
[ Upstream commit ff67dbd554b2aaa22be933eced32610ff90209dd ]
The third parameter of dytc_cql_command should not be NULL since it will
be dereferenced immediately.
Fixes: ff36b0d953dc4 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Signed-off-by: Qiu Wenbo <[email protected]>
Acked-by: Ike Panhc <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/ideapad-laptop.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 6cb5ad4be231..8f871151f0cc 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -809,6 +809,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
{
struct ideapad_dytc_priv *dytc = container_of(pprof, struct ideapad_dytc_priv, pprof);
struct ideapad_private *priv = dytc->priv;
+ unsigned long output;
int err;
err = mutex_lock_interruptible(&dytc->mutex);
@@ -829,7 +830,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
/* Determine if we are in CQL mode. This alters the commands we do */
err = dytc_cql_command(priv, DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1),
- NULL);
+ &output);
if (err)
goto unlock;
}
--
2.30.2
From: Olivia Mackintosh <[email protected]>
commit e7df7df5a3809d733888db6ce6592a644acaac19 upstream.
Add case statement to set sample-rate for the DJM-750 Pioneer
mixer. This was included as part of another patch but I think it has
been archived on Patchwork and hasn't been merged.
Signed-off-by: Olivia Mackintosh <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1511,6 +1511,7 @@ void snd_usb_set_format_quirk(struct snd
case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
pioneer_djm_set_format_quirk(subs, 0x0082);
break;
+ case USB_ID(0x08e4, 0x017f): /* Pioneer DJM-750 */
case USB_ID(0x08e4, 0x0163): /* Pioneer DJM-850 */
pioneer_djm_set_format_quirk(subs, 0x0086);
break;
From: Chris Wilson <[email protected]>
commit 036867e93ebf4d7e70eba6a8c72db74ee3760bc3 upstream.
When instantiating a tiled object on an L-shaped memory machine, we mark
the object as unshrinkable to prevent the shrinker from trying to swap
out the pages. We have to do this as we do not know the swizzling on the
individual pages, and so the data will be scrambled across swap out/in.
Not only do we need to move the object off the shrinker list, we need to
mark the object with shrink_pin so that the counter is consistent across
calls to madvise.
v2: in the madvise ioctl we need to check if the object is currently
shrinkable/purgeable, not if the object type supports shrinking
Fixes: 0175969e489a ("drm/i915/gem: Use shrinkable status for unknown swizzle quirks")
Reported-by: Ville Syrjälä <[email protected]>
Tested-by: Ville Syrjälä <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Cc: <[email protected]> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 8777d17b68dcfbfbd4d524f444adefae56f41225)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gem/i915_gem_pages.c | 2 ++
drivers/gpu/drm/i915/i915_gem.c | 11 +++++------
2 files changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_pages.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_pages.c
@@ -63,6 +63,8 @@ void __i915_gem_object_set_pages(struct
i915->quirks & QUIRK_PIN_SWIZZLED_PAGES) {
GEM_BUG_ON(i915_gem_object_has_tiling_quirk(obj));
i915_gem_object_set_tiling_quirk(obj);
+ GEM_BUG_ON(!list_empty(&obj->mm.link));
+ atomic_inc(&obj->mm.shrink_pin);
shrinkable = false;
}
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -972,12 +972,11 @@ i915_gem_madvise_ioctl(struct drm_device
obj->mm.madv = args->madv;
if (i915_gem_object_has_pages(obj)) {
- struct list_head *list;
+ unsigned long flags;
- if (i915_gem_object_is_shrinkable(obj)) {
- unsigned long flags;
-
- spin_lock_irqsave(&i915->mm.obj_lock, flags);
+ spin_lock_irqsave(&i915->mm.obj_lock, flags);
+ if (!list_empty(&obj->mm.link)) {
+ struct list_head *list;
if (obj->mm.madv != I915_MADV_WILLNEED)
list = &i915->mm.purge_list;
@@ -985,8 +984,8 @@ i915_gem_madvise_ioctl(struct drm_device
list = &i915->mm.shrink_list;
list_move_tail(&obj->mm.link, list);
- spin_unlock_irqrestore(&i915->mm.obj_lock, flags);
}
+ spin_unlock_irqrestore(&i915->mm.obj_lock, flags);
}
/* if the object is no longer attached, discard its backing storage */
From: Daniel Beer <[email protected]>
commit a1149a6c06ee094a6e62886b0c0e8e66967a728a upstream.
Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755)
results in the message:
mmc0: 1.8V regulator output did not become stable
Following this message, some cards work (sometimes), but most cards fail
with EILSEQ. This behaviour is observed on Debian 10 running kernel
4.19.188, but also with 5.8.18 and 5.11.15.
The driver currently waits 5ms after switching on the 1.8V regulator for
it to become stable. Increasing this to 10ms gets rid of the warning
about stability, but most cards still fail. Increasing it to 20ms gets
some cards working (a 32GB Samsung micro SD works, a 128GB ADATA
doesn't). At 50ms, the ADATA works most of the time, and at 100ms both
cards work reliably.
Signed-off-by: Daniel Beer <[email protected]>
Acked-by: Ben Chuang <[email protected]>
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-pci-gli.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -587,8 +587,13 @@ static void sdhci_gli_voltage_switch(str
*
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
+ *
+ * ...however, the controller in the NUC10i3FNK4 (a 9755) requires
+ * slightly longer than 5ms before the control register reports that
+ * 1.8V is ready, and far longer still before the card will actually
+ * work reliably.
*/
- usleep_range(5000, 5500);
+ usleep_range(100000, 110000);
}
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
From: Guchun Chen <[email protected]>
commit 99c45ba5799d6b938bd9bd20edfeb6f3e3e039b9 upstream.
Current golden setting is out of date.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -1391,9 +1391,10 @@ static const struct soc15_reg_golden gol
SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG, 0xffffffff, 0x20000000),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xffffffff, 0x00000420),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG3, 0xffffffff, 0x00000200),
- SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04800000),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04900000),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DFSM_TILES_IN_FLIGHT, 0x0000ffff, 0x0000003f),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_LAST_OF_BURST_CONFIG, 0xffffffff, 0x03860204),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmGB_ADDR_CONFIG, 0x0c1800ff, 0x00000044),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGCR_GENERAL_CNTL, 0x1ff0ffff, 0x00000500),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGE_PRIV_CONTROL, 0x00007fff, 0x000001fe),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL1_PIPE_STEER, 0xffffffff, 0xe4e4e4e4),
@@ -1411,12 +1412,13 @@ static const struct soc15_reg_golden gol
SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE_2, 0x00000820, 0x00000820),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_LINE_STIPPLE_STATE, 0x0000ff0f, 0x00000000),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmRMI_SPARE, 0xffffffff, 0xffff3101),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1, 0x001f0000, 0x00070104),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ALU_CLK_CTRL, 0xffffffff, 0xffffffff),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ARB_CONFIG, 0x00000133, 0x00000130),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_LDS_CLK_CTRL, 0xffffffff, 0xffffffff),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0xfff7ffff, 0x01030000),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CNTL, 0xffdf80ff, 0x479c0010),
- SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00800000)
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00c00000)
};
static void gfx_v10_rlcg_wreg(struct amdgpu_device *adev, u32 offset, u32 v)
From: Takashi Iwai <[email protected]>
commit c1f0616124c455c5c762b6f123e40bba5df759e6 upstream.
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
Cc: <[email protected]>
Reported-and-tested-by: Sergey Senozhatsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/intel8x0.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -331,6 +331,7 @@ struct ichdev {
unsigned int ali_slot; /* ALI DMA slot */
struct ac97_pcm *pcm;
int pcm_open_flag;
+ unsigned int prepared:1;
unsigned int suspended: 1;
};
@@ -691,6 +692,9 @@ static inline void snd_intel8x0_update(s
int status, civ, i, step;
int ack = 0;
+ if (!ichdev->prepared || ichdev->suspended)
+ return;
+
spin_lock_irqsave(&chip->reg_lock, flags);
status = igetbyte(chip, port + ichdev->roff_sr);
civ = igetbyte(chip, port + ICH_REG_OFF_CIV);
@@ -881,6 +885,7 @@ static int snd_intel8x0_hw_params(struct
if (ichdev->pcm_open_flag) {
snd_ac97_pcm_close(ichdev->pcm);
ichdev->pcm_open_flag = 0;
+ ichdev->prepared = 0;
}
err = snd_ac97_pcm_open(ichdev->pcm, params_rate(hw_params),
params_channels(hw_params),
@@ -902,6 +907,7 @@ static int snd_intel8x0_hw_free(struct s
if (ichdev->pcm_open_flag) {
snd_ac97_pcm_close(ichdev->pcm);
ichdev->pcm_open_flag = 0;
+ ichdev->prepared = 0;
}
return 0;
}
@@ -976,6 +982,7 @@ static int snd_intel8x0_pcm_prepare(stru
ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
}
snd_intel8x0_setup_periods(chip, ichdev);
+ ichdev->prepared = 1;
return 0;
}
From: Takashi Iwai <[email protected]>
commit 8eedd3a70a70f51fa963f3ad7fa97afd0c75bd44 upstream.
It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.
This patch provides a fixup for the fixed DAC/pin mapping for this
device.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5720,6 +5720,18 @@ static void alc_fixup_tpt470_dacs(struct
spec->gen.preferred_dacs = preferred_pairs;
}
+static void alc295_fixup_asus_dacs(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static const hda_nid_t preferred_pairs[] = {
+ 0x17, 0x02, 0x21, 0x03, 0
+ };
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE)
+ spec->gen.preferred_dacs = preferred_pairs;
+}
+
static void alc_shutup_dell_xps13(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -6520,6 +6532,7 @@ enum {
ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST,
ALC256_FIXUP_ACER_HEADSET_MIC,
ALC285_FIXUP_IDEAPAD_S740_COEF,
+ ALC295_FIXUP_ASUS_DACS,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8047,6 +8060,10 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
},
+ [ALC295_FIXUP_ASUS_DACS] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc295_fixup_asus_dacs,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8245,6 +8262,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS),
SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
From: Neil Armstrong <[email protected]>
commit 9b81354d7ebc1fd17f666a168dcabf27dae290bd upstream.
The brcmfmac driver can generate a scatterlist from a skb with each packets
not aligned to the block size. This is not supported by the Amlogic Descriptor
dma engine where each descriptor must match a multiple of the block size.
The sg list is valid, since the sum of the sg buffers is a multiple of the
block size, but we must discard those when in SD_IO_RW_EXTENDED mode since
SDIO block mode can be used under the hood even with data->blocks == 1.
Those transfers are very rare, thus can be replaced by a bounce buffer
without real performance loss.
Fixes: 7412dee9f1fd ("mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode")
Cc: [email protected]
Reported-by: Christian Hewitt <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/meson-gx-mmc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -236,7 +236,8 @@ static void meson_mmc_get_transfer_mode(
if (host->dram_access_quirk)
return;
- if (data->blocks > 1) {
+ /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
+ if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
/*
* In block mode DMA descriptor format, "length" field indicates
* number of blocks and there is no way to pass DMA size that
From: Takashi Sakamoto <[email protected]>
commit 814b43127f4ac69332e809152e30773941438aff upstream.
The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.
Cc: <[email protected]>
Fixes: 753e717986c2 ("ALSA: firewire-lib: use packet descriptor for IR context")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/amdtp-stream-trace.h | 6 +++---
sound/firewire/amdtp-stream.c | 15 +++++++++------
2 files changed, 12 insertions(+), 9 deletions(-)
--- a/sound/firewire/amdtp-stream-trace.h
+++ b/sound/firewire/amdtp-stream-trace.h
@@ -14,8 +14,8 @@
#include <linux/tracepoint.h>
TRACE_EVENT(amdtp_packet,
- TP_PROTO(const struct amdtp_stream *s, u32 cycles, const __be32 *cip_header, unsigned int payload_length, unsigned int data_blocks, unsigned int data_block_counter, unsigned int index),
- TP_ARGS(s, cycles, cip_header, payload_length, data_blocks, data_block_counter, index),
+ TP_PROTO(const struct amdtp_stream *s, u32 cycles, const __be32 *cip_header, unsigned int payload_length, unsigned int data_blocks, unsigned int data_block_counter, unsigned int packet_index, unsigned int index),
+ TP_ARGS(s, cycles, cip_header, payload_length, data_blocks, data_block_counter, packet_index, index),
TP_STRUCT__entry(
__field(unsigned int, second)
__field(unsigned int, cycle)
@@ -48,7 +48,7 @@ TRACE_EVENT(amdtp_packet,
__entry->payload_quadlets = payload_length / sizeof(__be32);
__entry->data_blocks = data_blocks;
__entry->data_block_counter = data_block_counter,
- __entry->packet_index = s->packet_index;
+ __entry->packet_index = packet_index;
__entry->irq = !!in_interrupt();
__entry->index = index;
),
--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -526,7 +526,7 @@ static void build_it_pkt_header(struct a
}
trace_amdtp_packet(s, cycle, cip_header, payload_length, data_blocks,
- data_block_counter, index);
+ data_block_counter, s->packet_index, index);
}
static int check_cip_header(struct amdtp_stream *s, const __be32 *buf,
@@ -630,7 +630,7 @@ static int parse_ir_ctx_header(struct am
unsigned int *payload_length,
unsigned int *data_blocks,
unsigned int *data_block_counter,
- unsigned int *syt, unsigned int index)
+ unsigned int *syt, unsigned int packet_index, unsigned int index)
{
const __be32 *cip_header;
int err;
@@ -662,7 +662,7 @@ static int parse_ir_ctx_header(struct am
}
trace_amdtp_packet(s, cycle, cip_header, *payload_length, *data_blocks,
- *data_block_counter, index);
+ *data_block_counter, packet_index, index);
return err;
}
@@ -701,12 +701,13 @@ static int generate_device_pkt_descs(str
unsigned int packets)
{
unsigned int dbc = s->data_block_counter;
+ unsigned int packet_index = s->packet_index;
+ unsigned int queue_size = s->queue_size;
int i;
int err;
for (i = 0; i < packets; ++i) {
struct pkt_desc *desc = descs + i;
- unsigned int index = (s->packet_index + i) % s->queue_size;
unsigned int cycle;
unsigned int payload_length;
unsigned int data_blocks;
@@ -715,7 +716,7 @@ static int generate_device_pkt_descs(str
cycle = compute_cycle_count(ctx_header[1]);
err = parse_ir_ctx_header(s, cycle, ctx_header, &payload_length,
- &data_blocks, &dbc, &syt, i);
+ &data_blocks, &dbc, &syt, packet_index, i);
if (err < 0)
return err;
@@ -723,13 +724,15 @@ static int generate_device_pkt_descs(str
desc->syt = syt;
desc->data_blocks = data_blocks;
desc->data_block_counter = dbc;
- desc->ctx_payload = s->buffer.packets[index].buffer;
+ desc->ctx_payload = s->buffer.packets[packet_index].buffer;
if (!(s->flags & CIP_DBC_IS_END_EVENT))
dbc = (dbc + desc->data_blocks) & 0xff;
ctx_header +=
s->ctx_data.tx.ctx_header_size / sizeof(*ctx_header);
+
+ packet_index = (packet_index + 1) % queue_size;
}
s->data_block_counter = dbc;
From: Hui Wang <[email protected]>
commit 8822702f6e4c8917c83ba79e0ebf2c8c218910d4 upstream.
Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.
Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.
BugLink: http://bugs.launchpad.net/bugs/1925057
Suggested-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -395,7 +395,6 @@ static void alc_fill_eapd_coef(struct hd
case 0x10ec0282:
case 0x10ec0283:
case 0x10ec0286:
- case 0x10ec0287:
case 0x10ec0288:
case 0x10ec0285:
case 0x10ec0298:
@@ -406,6 +405,10 @@ static void alc_fill_eapd_coef(struct hd
case 0x10ec0275:
alc_update_coef_idx(codec, 0xe, 0, 1<<0);
break;
+ case 0x10ec0287:
+ alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+ alc_write_coef_idx(codec, 0x8, 0x4ab7);
+ break;
case 0x10ec0293:
alc_update_coef_idx(codec, 0xa, 1<<13, 0);
break;
From: Nicholas Piggin <[email protected]>
commit 5665bc35c1ed917ac8fd06cb651317bb47a65b10 upstream.
The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.
Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: [email protected] # v5.9+
Reported-by: "Dmitry V. Levin" <[email protected]>
Suggested-by: "Dmitry V. Levin" <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/powerpc/syscall64-abi.rst | 10 +++++++++
tools/testing/selftests/seccomp/seccomp_bpf.c | 27 +++++++++++++++++---------
2 files changed, 28 insertions(+), 9 deletions(-)
--- a/Documentation/powerpc/syscall64-abi.rst
+++ b/Documentation/powerpc/syscall64-abi.rst
@@ -109,6 +109,16 @@ auxiliary vector.
scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
vsyscall
========
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -1753,16 +1753,25 @@ TEST_F(TRACE_poke, getpid_runs_normally)
# define SYSCALL_RET_SET(_regs, _val) \
do { \
typeof(_val) _result = (_val); \
- /* \
- * A syscall error is signaled by CR0 SO bit \
- * and the code is stored as a positive value. \
- */ \
- if (_result < 0) { \
- SYSCALL_RET(_regs) = -_result; \
- (_regs).ccr |= 0x10000000; \
- } else { \
+ if ((_regs.trap & 0xfff0) == 0x3000) { \
+ /* \
+ * scv 0 system call uses -ve result \
+ * for error, so no need to adjust. \
+ */ \
SYSCALL_RET(_regs) = _result; \
- (_regs).ccr &= ~0x10000000; \
+ } else { \
+ /* \
+ * A syscall error is signaled by the \
+ * CR0 SO bit and the code is stored as \
+ * a positive value. \
+ */ \
+ if (_result < 0) { \
+ SYSCALL_RET(_regs) = -_result; \
+ (_regs).ccr |= 0x10000000; \
+ } else { \
+ SYSCALL_RET(_regs) = _result; \
+ (_regs).ccr &= ~0x10000000; \
+ } \
} \
} while (0)
# define SYSCALL_RET_SET_ON_PTRACE_EXIT
From: Barnabás Pőcze <[email protected]>
commit b09aaa3f2c0edeeed670cd29961a0e35bddc78cf upstream.
"smbc" should be "sbmc". `eval_smbc()` incorrectly called
the SMBC ACPI method instead of SBMC. This resulted in
partial loss of functionality. Rectify that by calling
the correct ACPI method (SBMC), and also rename
methods and constants.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985
Fixes: 0b765671cb80 ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums")
Fixes: ff36b0d953dc ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Cc: [email protected] # 5.12
Signed-off-by: Barnabás Pőcze <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/ideapad-laptop.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -57,8 +57,8 @@ enum {
};
enum {
- SMBC_CONSERVATION_ON = 3,
- SMBC_CONSERVATION_OFF = 5,
+ SBMC_CONSERVATION_ON = 3,
+ SBMC_CONSERVATION_OFF = 5,
};
enum {
@@ -182,9 +182,9 @@ static int eval_gbmd(acpi_handle handle,
return eval_int(handle, "GBMD", res);
}
-static int exec_smbc(acpi_handle handle, unsigned long arg)
+static int exec_sbmc(acpi_handle handle, unsigned long arg)
{
- return exec_simple_method(handle, "SMBC", arg);
+ return exec_simple_method(handle, "SBMC", arg);
}
static int eval_hals(acpi_handle handle, unsigned long *res)
@@ -477,7 +477,7 @@ static ssize_t conservation_mode_store(s
if (err)
return err;
- err = exec_smbc(priv->adev->handle, state ? SMBC_CONSERVATION_ON : SMBC_CONSERVATION_OFF);
+ err = exec_sbmc(priv->adev->handle, state ? SBMC_CONSERVATION_ON : SBMC_CONSERVATION_OFF);
if (err)
return err;
From: Mike Kravetz <[email protected]>
commit e32905e57358fdfb82f9de024534f205b3af7dac upstream.
In commit d6995da31122 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve. Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.
Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation. Specifically, this would be the
result of an unlikely copy_huge_page_from_user error. There is not an
increased chance of hitting the VM_BUG_ON.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d6995da31122 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mina Almasry <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hugetlbfs/inode.c | 2 +-
mm/userfaultfd.c | 28 ++++++++++++++--------------
2 files changed, 15 insertions(+), 15 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -532,7 +532,7 @@ static void remove_inode_hugepages(struc
* the subpool and global reserve usage count can need
* to be adjusted.
*/
- VM_BUG_ON(PagePrivate(page));
+ VM_BUG_ON(HPageRestoreReserve(page));
remove_huge_page(page);
freed++;
if (!truncate_op) {
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -362,38 +362,38 @@ out:
* If a reservation for the page existed in the reservation
* map of a private mapping, the map was modified to indicate
* the reservation was consumed when the page was allocated.
- * We clear the PagePrivate flag now so that the global
+ * We clear the HPageRestoreReserve flag now so that the global
* reserve count will not be incremented in free_huge_page.
* The reservation map will still indicate the reservation
* was consumed and possibly prevent later page allocation.
* This is better than leaking a global reservation. If no
- * reservation existed, it is still safe to clear PagePrivate
- * as no adjustments to reservation counts were made during
- * allocation.
+ * reservation existed, it is still safe to clear
+ * HPageRestoreReserve as no adjustments to reservation counts
+ * were made during allocation.
*
* The reservation map for shared mappings indicates which
* pages have reservations. When a huge page is allocated
* for an address with a reservation, no change is made to
- * the reserve map. In this case PagePrivate will be set
- * to indicate that the global reservation count should be
+ * the reserve map. In this case HPageRestoreReserve will be
+ * set to indicate that the global reservation count should be
* incremented when the page is freed. This is the desired
* behavior. However, when a huge page is allocated for an
* address without a reservation a reservation entry is added
- * to the reservation map, and PagePrivate will not be set.
- * When the page is freed, the global reserve count will NOT
- * be incremented and it will appear as though we have leaked
- * reserved page. In this case, set PagePrivate so that the
- * global reserve count will be incremented to match the
- * reservation map entry which was created.
+ * to the reservation map, and HPageRestoreReserve will not be
+ * set. When the page is freed, the global reserve count will
+ * NOT be incremented and it will appear as though we have
+ * leaked reserved page. In this case, set HPageRestoreReserve
+ * so that the global reserve count will be incremented to
+ * match the reservation map entry which was created.
*
* Note that vm_alloc_shared is based on the flags of the vma
* for which the page was originally allocated. dst_vma could
* be different or NULL on error.
*/
if (vm_alloc_shared)
- SetPagePrivate(page);
+ SetHPageRestoreReserve(page);
else
- ClearPagePrivate(page);
+ ClearHPageRestoreReserve(page);
put_page(page);
}
BUG_ON(copied < 0);
From: Michal Hocko <[email protected]>
commit f10628d2f613195132532e0fbda439eeed8d12a2 upstream.
While reviewing [1] I came across commit d3378e86d182 ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways. First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check. Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.
It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]
Therefore revert the original patch.
Link: http://lkml.kernel.org/r/[email protected] [1]
Link: http://lkml.kernel.org/r/[email protected] [2]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d3378e86d182 ("mm/gup: check page posion status for coredump.")
Signed-off-by: Michal Hocko <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Aili Yao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/gup.c | 4 ----
mm/internal.h | 20 --------------------
2 files changed, 24 deletions(-)
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -1535,10 +1535,6 @@ struct page *get_dump_page(unsigned long
FOLL_FORCE | FOLL_DUMP | FOLL_GET);
if (locked)
mmap_read_unlock(mm);
-
- if (ret == 1 && is_page_poisoned(page))
- return NULL;
-
return (ret == 1) ? page : NULL;
}
#endif /* CONFIG_ELF_CORE */
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -97,26 +97,6 @@ static inline void set_page_refcounted(s
set_page_count(page, 1);
}
-/*
- * When kernel touch the user page, the user page may be have been marked
- * poison but still mapped in user space, if without this page, the kernel
- * can guarantee the data integrity and operation success, the kernel is
- * better to check the posion status and avoid touching it, be good not to
- * panic, coredump for process fatal signal is a sample case matching this
- * scenario. Or if kernel can't guarantee the data integrity, it's better
- * not to call this function, let kernel touch the poison page and get to
- * panic.
- */
-static inline bool is_page_poisoned(struct page *page)
-{
- if (PageHWPoison(page))
- return true;
- else if (PageHuge(page) && PageHWPoison(compound_head(page)))
- return true;
-
- return false;
-}
-
extern unsigned long highest_memmap_pfn;
/*
From: Greg Kroah-Hartman <[email protected]>
commit 5e68b86c7b7c059c0f0ec4bf8adabe63f84a61eb upstream.
This reverts commit 23015b22e47c5409620b1726a677d69e5cd032ba.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit has a memory leak on the error path here, it does
not clean up everything properly.
Cc: Kangjie Lu <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rapidio/rio_cm.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c
index 50ec53d67a4c..e6c16f04f2b4 100644
--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2138,14 +2138,6 @@ static int riocm_add_mport(struct device *dev,
mutex_init(&cm->rx_lock);
riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
- if (!cm->rx_wq) {
- riocm_error("failed to allocate IBMBOX_%d on %s",
- cmbox, mport->name);
- rio_release_outb_mbox(mport, cmbox);
- kfree(cm);
- return -ENOMEM;
- }
-
INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
cm->tx_slot = 0;
--
2.31.1
From: Guchun Chen <[email protected]>
commit 77194d8642dd4cb7ea8ced77bfaea55610574c38 upstream.
Current golden setting is out of date.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -123,6 +123,10 @@ static const struct soc15_reg_golden gol
static const struct soc15_reg_golden golden_settings_sdma_nv12[] = {
SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+ SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
};
From: Neil Armstrong <[email protected]>
commit cabb1bb60e88ccaaa122ba01862403cd44e8e8f8 upstream.
Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment
is not compatible with the Amlogic DMA descriptor engine requirements.
Simply replace with dev_warn_once() to inform user this should be fixed to avoid
degraded performance.
This should be ultimately fixed in ath10k, but since it's only a performance issue
the warning should be removed.
Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Cc: [email protected]
Reported-by: Christian Hewitt <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/meson-gx-mmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -258,7 +258,9 @@ static void meson_mmc_get_transfer_mode(
for_each_sg(data->sg, sg, data->sg_len, i) {
/* check for 8 byte alignment */
if (sg->offset % 8) {
- WARN_ONCE(1, "unaligned scatterlist buffer\n");
+ dev_warn_once(mmc_dev(mmc),
+ "unaligned sg offset %u, disabling descriptor DMA for transfer\n",
+ sg->offset);
return;
}
}
From: Jon Hunter <[email protected]>
commit bdbe871ef0caa660e16461a2a94579d9f9ef7ba4 upstream.
When hotplugging CPUs on Tegra186 and Tegra194 errors such as the
following are seen ...
IRQ63: set affinity failed(-22).
IRQ65: set affinity failed(-22).
IRQ66: set affinity failed(-22).
IRQ67: set affinity failed(-22).
Looking at the /proc/interrupts the above are all interrupts associated
with GPIOs. The reason why these error messages occur is because there
is no 'parent_data' associated with any of the GPIO interrupts and so
tegra186_irq_set_affinity() simply returns -EINVAL.
To understand why there is no 'parent_data' it is first necessary to
understand that in addition to the GPIO interrupts being routed to the
interrupt controller (GIC), the interrupts for some GPIOs are also
routed to the Tegra Power Management Controller (PMC) to wake up the
system from low power states. In order to configure GPIO events as
wake events in the PMC, the PMC is configured as IRQ parent domain
for the GPIO IRQ domain. Originally the GIC was the IRQ parent domain
of the PMC and although this was working, this started causing issues
once commit 64a267e9a41c ("irqchip/gic: Configure SGIs as standard
interrupts") was added, because technically, the GIC is not a parent
of the PMC. Commit c351ab7bf2a5 ("soc/tegra: pmc: Don't create fake
interrupt hierarchy levels") fixed this by severing the IRQ domain
hierarchy for the Tegra GPIOs and hence, there may be no IRQ parent
domain for the GPIOs.
The GPIO controllers on Tegra186 and Tegra194 have either one or six
interrupt lines to the interrupt controller. For GPIO controllers with
six interrupts, the mapping of the GPIO interrupt to the controller
interrupt is configurable within the GPIO controller. Currently a
default mapping is used, however, it could be possible to use the
set affinity callback for the Tegra186 GPIO driver to do something a
bit more interesting. Currently, because interrupts for all GPIOs are
have the same mapping and any attempts to configure the affinity for
a given GPIO can conflict with another that shares the same IRQ, for
now it is simpler to just remove set affinity support and this avoids
the above warnings being seen.
Cc: <[email protected]>
Fixes: c4e1f7d92cd6 ("gpio: tegra186: Set affinity callback to parent")
Signed-off-by: Jon Hunter <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-tegra186.c | 11 -----------
1 file changed, 11 deletions(-)
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -444,16 +444,6 @@ static int tegra186_irq_set_wake(struct
return 0;
}
-static int tegra186_irq_set_affinity(struct irq_data *data,
- const struct cpumask *dest,
- bool force)
-{
- if (data->parent_data)
- return irq_chip_set_affinity_parent(data, dest, force);
-
- return -EINVAL;
-}
-
static void tegra186_gpio_irq(struct irq_desc *desc)
{
struct tegra_gpio *gpio = irq_desc_get_handler_data(desc);
@@ -700,7 +690,6 @@ static int tegra186_gpio_probe(struct pl
gpio->intc.irq_unmask = tegra186_irq_unmask;
gpio->intc.irq_set_type = tegra186_irq_set_type;
gpio->intc.irq_set_wake = tegra186_irq_set_wake;
- gpio->intc.irq_set_affinity = tegra186_irq_set_affinity;
irq = &gpio->gpio.irq;
irq->chip = &gpio->intc;
From: Hsin-Yi Wang <[email protected]>
commit 2962484dfef8dbb7f9059822bc26ce8a04d0e47c upstream.
cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") disables
regulator in runtime suspend. If runtime suspend is called before
regulator disable, it will results in regulator unbalanced disabling.
Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control")
Cc: stable <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Hsin-Yi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/eeprom/at24.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -763,7 +763,8 @@ static int at24_probe(struct i2c_client
at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
if (IS_ERR(at24->nvmem)) {
pm_runtime_disable(dev);
- regulator_disable(at24->vcc_reg);
+ if (!pm_runtime_status_suspended(dev))
+ regulator_disable(at24->vcc_reg);
return PTR_ERR(at24->nvmem);
}
@@ -774,7 +775,8 @@ static int at24_probe(struct i2c_client
err = at24_read(at24, 0, &test_byte, 1);
if (err) {
pm_runtime_disable(dev);
- regulator_disable(at24->vcc_reg);
+ if (!pm_runtime_status_suspended(dev))
+ regulator_disable(at24->vcc_reg);
return -ENODEV;
}
From: Anirudh Rayabharam <[email protected]>
commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream.
In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().
Cc: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rapidio/rio_cm.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2127,6 +2127,14 @@ static int riocm_add_mport(struct device
return -ENODEV;
}
+ cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+ if (!cm->rx_wq) {
+ rio_release_inb_mbox(mport, cmbox);
+ rio_release_outb_mbox(mport, cmbox);
+ kfree(cm);
+ return -ENOMEM;
+ }
+
/*
* Allocate and register inbound messaging buffers to be ready
* to receive channel and system management requests
@@ -2137,7 +2145,6 @@ static int riocm_add_mport(struct device
cm->rx_slots = RIOCM_RX_RING_SIZE;
mutex_init(&cm->rx_lock);
riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
- cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
cm->tx_slot = 0;
From: Greg Kroah-Hartman <[email protected]>
commit 754f39158441f4c0d7a8255209dd9a939f08ce80 upstream.
This reverts commit 32f47179833b63de72427131169809065db6745e.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be not be needed at all as the
change was useless because this function can only be called when
of_match_device matched on something. So it should be reverted.
Cc: Aditya Pakki <[email protected]>
Cc: stable <[email protected]>
Fixes: 32f47179833b ("serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference")
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/mvebu-uart.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -818,9 +818,6 @@ static int mvebu_uart_probe(struct platf
return -EINVAL;
}
- if (!match)
- return -ENODEV;
-
/* Assume that all UART ports have a DT alias or none has */
id = of_alias_get_id(pdev->dev.of_node, "serial");
if (!pdev->dev.of_node || id < 0)
From: Christian König <[email protected]>
commit 7e008b02557ccece4d2c31fb0eaf6243cbc87121 upstream.
DMA-buf internal users call the pin/unpin functions without having a
dynamic attachment. Avoid the warning and backtrace in the logs.
Signed-off-by: Christian König <[email protected]>
Bugs: https://gitlab.freedesktop.org/drm/intel/-/issues/3481
Fixes: c545781e1c55 ("dma-buf: doc polish for pin/unpin")
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
CC: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma-buf/dma-buf.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -760,7 +760,7 @@ dma_buf_dynamic_attach(struct dma_buf *d
if (dma_buf_is_dynamic(attach->dmabuf)) {
dma_resv_lock(attach->dmabuf->resv, NULL);
- ret = dma_buf_pin(attach);
+ ret = dmabuf->ops->pin(attach);
if (ret)
goto err_unlock;
}
@@ -786,7 +786,7 @@ err_attach:
err_unpin:
if (dma_buf_is_dynamic(attach->dmabuf))
- dma_buf_unpin(attach);
+ dmabuf->ops->unpin(attach);
err_unlock:
if (dma_buf_is_dynamic(attach->dmabuf))
@@ -843,7 +843,7 @@ void dma_buf_detach(struct dma_buf *dmab
__unmap_dma_buf(attach, attach->sgt, attach->dir);
if (dma_buf_is_dynamic(attach->dmabuf)) {
- dma_buf_unpin(attach);
+ dmabuf->ops->unpin(attach);
dma_resv_unlock(attach->dmabuf->resv);
}
}
@@ -956,7 +956,7 @@ struct sg_table *dma_buf_map_attachment(
if (dma_buf_is_dynamic(attach->dmabuf)) {
dma_resv_assert_held(attach->dmabuf->resv);
if (!IS_ENABLED(CONFIG_DMABUF_MOVE_NOTIFY)) {
- r = dma_buf_pin(attach);
+ r = attach->dmabuf->ops->pin(attach);
if (r)
return ERR_PTR(r);
}
@@ -968,7 +968,7 @@ struct sg_table *dma_buf_map_attachment(
if (IS_ERR(sg_table) && dma_buf_is_dynamic(attach->dmabuf) &&
!IS_ENABLED(CONFIG_DMABUF_MOVE_NOTIFY))
- dma_buf_unpin(attach);
+ attach->dmabuf->ops->unpin(attach);
if (!IS_ERR(sg_table) && attach->dmabuf->ops->cache_sgt_mapping) {
attach->sgt = sg_table;
From: Nathan Chancellor <[email protected]>
commit 0024430e920f2900654ad83cd081cf52e02a3ef5 upstream.
Commit b33fff07e3e3 ("x86, build: allow LTO to be selected") added a
couple of '-plugin-opt=' flags to KBUILD_LDFLAGS because the code model
and stack alignment are not stored in LLVM bitcode.
However, these flags were added to KBUILD_LDFLAGS prior to the
emulation flag assignment, which uses ':=', so they were overwritten
and never added to $(LD) invocations.
The absence of these flags caused misalignment issues in the
AMDGPU driver when compiling with CONFIG_LTO_CLANG, resulting in
general protection faults.
Shuffle the assignment below the initial one so that the flags are
properly passed along and all of the linker flags stay together.
At the same time, avoid any future issues with clobbering flags by
changing the emulation flag assignment to '+=' since KBUILD_LDFLAGS is
already defined with ':=' in the main Makefile before being exported for
modification here as a result of commit:
ce99d0bf312d ("kbuild: clear LDFLAGS in the top Makefile")
Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected")
Reported-by: Anthony Ruhier <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Anthony Ruhier <[email protected]>
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/1374
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/Makefile | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -170,11 +170,6 @@ ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
endif
-ifdef CONFIG_LTO_CLANG
-KBUILD_LDFLAGS += -plugin-opt=-code-model=kernel \
- -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
-endif
-
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
@@ -194,7 +189,12 @@ ifdef CONFIG_RETPOLINE
endif
endif
-KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
+KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
+
+ifdef CONFIG_LTO_CLANG
+KBUILD_LDFLAGS += -plugin-opt=-code-model=kernel \
+ -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
+endif
ifdef CONFIG_X86_NEED_RELOCS
LDFLAGS_vmlinux := --emit-relocs --discard-none
From: Mikulas Patocka <[email protected]>
commit 7ee06ddc4038f936b0d4459d37a7d4d844fb03db upstream.
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Reported-by: Michael Tokarev <[email protected]>
Tested-by: Michael Tokarev <[email protected]>
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-snap.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -854,12 +854,11 @@ static int dm_add_exception(void *contex
static uint32_t __minimum_chunk_size(struct origin *o)
{
struct dm_snapshot *snap;
- unsigned chunk_size = 0;
+ unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
if (o)
list_for_each_entry(snap, &o->snapshots, list)
- chunk_size = min_not_zero(chunk_size,
- snap->store->chunk_size);
+ chunk_size = min(chunk_size, snap->store->chunk_size);
return (uint32_t) chunk_size;
}
From: Martin Ågren <[email protected]>
commit 156ed0215ef365604f2382d5164c36d3a1cfd98f upstream.
Commit ef84928cff58 ("uio/uio_pci_generic: use device-managed function
equivalents") was able to simplify various error paths thanks to no
longer having to clean up on the way out. Some error paths were dropped,
others were simplified. In one of those simplifications, the return
value was accidentally changed from -ENODEV to -ENOMEM. Restore the old
return value.
Fixes: ef84928cff58 ("uio/uio_pci_generic: use device-managed function equivalents")
Cc: stable <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Martin Ågren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uio/uio_pci_generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/uio/uio_pci_generic.c
+++ b/drivers/uio/uio_pci_generic.c
@@ -82,7 +82,7 @@ static int probe(struct pci_dev *pdev,
}
if (pdev->irq && !pci_intx_mask_supported(pdev))
- return -ENOMEM;
+ return -ENODEV;
gdev = devm_kzalloc(&pdev->dev, sizeof(struct uio_pci_generic_dev), GFP_KERNEL);
if (!gdev)
From: Greg Kroah-Hartman <[email protected]>
commit 7930742d6a0ff091c85b92ef4e076432d8d8cb79 upstream.
This reverts commit 26fd962bde0b15e54234fe762d86bc0349df1de4.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The change here was incorrect. While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.
Cc: Kangjie Lu <[email protected]>
Cc: Shannon Nelson <[email protected]>
Cc: David S. Miller <[email protected]>
Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sun/niu.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,8 +8097,6 @@ static int niu_pci_vpd_scan_props(struct
start += 3;
prop_len = niu_pci_eeprom_read(np, start + 4);
- if (prop_len < 0)
- return prop_len;
err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
if (err < 0)
return err;
@@ -8143,12 +8141,8 @@ static int niu_pci_vpd_scan_props(struct
netif_printk(np, probe, KERN_DEBUG, np->dev,
"VPD_SCAN: Reading in property [%s] len[%d]\n",
namebuf, prop_len);
- for (i = 0; i < prop_len; i++) {
- err = niu_pci_eeprom_read(np, off + i);
- if (err >= 0)
- *prop_buf = err;
- ++prop_buf;
- }
+ for (i = 0; i < prop_len; i++)
+ *prop_buf++ = niu_pci_eeprom_read(np, off + i);
}
start += len;
From: Greg Kroah-Hartman <[email protected]>
commit 68c5634c4a7278672a3bed00eb5646884257c413 upstream.
This reverts commit 765976285a8c8db3f0eb7f033829a899d0c2786e.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time. Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.
Cc: Kangjie Lu <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: Bryan Brattlof <[email protected]>
Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/base.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -452,11 +452,6 @@ static void _rtl_init_deferred_work(stru
/* <2> work queue */
rtlpriv->works.hw = hw;
rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
- if (unlikely(!rtlpriv->works.rtl_wq)) {
- pr_err("Failed to allocate work queue\n");
- return;
- }
-
INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
rtl_watchdog_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
From: Takashi Iwai <[email protected]>
commit 5d84b5318d860c9d80ca5dfae0e971ede53b4921 upstream.
HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup. This patch implements
those in the fixup table.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6533,6 +6533,7 @@ enum {
ALC256_FIXUP_ACER_HEADSET_MIC,
ALC285_FIXUP_IDEAPAD_S740_COEF,
ALC295_FIXUP_ASUS_DACS,
+ ALC295_FIXUP_HP_OMEN,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8064,6 +8065,26 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc295_fixup_asus_dacs,
},
+ [ALC295_FIXUP_HP_OMEN] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x12, 0xb7a60130 },
+ { 0x13, 0x40000000 },
+ { 0x14, 0x411111f0 },
+ { 0x16, 0x411111f0 },
+ { 0x17, 0x90170110 },
+ { 0x18, 0x411111f0 },
+ { 0x19, 0x02a11030 },
+ { 0x1a, 0x411111f0 },
+ { 0x1b, 0x04a19030 },
+ { 0x1d, 0x40600001 },
+ { 0x1e, 0x411111f0 },
+ { 0x21, 0x03211020 },
+ {}
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8222,6 +8243,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+ SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
@@ -8642,6 +8664,7 @@ static const struct hda_model_fixup alc2
{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
+ {.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
{}
};
#define ALC225_STANDARD_PINS \
From: Sagi Grimberg <[email protected]>
commit 825619b09ad351894d2c6fb6705f5b3711d145c7 upstream.
Commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq
context") added a second context that may perform a network send.
This means that now RX and TX are not serialized in nvme_tcp_io_work
and can run concurrently.
While there is correct mutual exclusion in the TX path (where
the send_mutex protect the queue socket send activity) RX activity,
and more specifically request completion may run concurrently.
This means we must guarantee that any mutation of the request state
related to its lifetime, bytes sent must not be accessed when a completion
may have possibly arrived back (and processed).
The race may trigger when a request completion arrives, processed
_and_ reused as a fresh new request, exactly in the (relatively short)
window between the last data payload sent and before the request iov_iter
is advanced.
Consider the following race:
1. 16K write request is queued
2. The nvme command and the data is sent to the controller (in-capsule
or solicited by r2t)
3. After the last payload is sent but before the req.iter is advanced,
the controller sends back a completion.
4. The completion is processed, the request is completed, and reused
to transfer a new request (write or read)
5. The new request is queued, and the driver reset the request parameters
(nvme_tcp_setup_cmd_pdu).
6. Now context in (2) resumes execution and advances the req.iter
==> use-after-completion as this is already a new request.
Fix this by making sure the request is not advanced after the last
data payload send, knowing that a completion may have arrived already.
An alternative solution would have been to delay the request completion
or state change waiting for reference counting on the TX path, but besides
adding atomic operations to the hot-path, it may present challenges in
multi-stage R2T scenarios where a r2t handler needs to be deferred to
an async execution.
Reported-by: Narayan Ayalasomayajula <[email protected]>
Tested-by: Anil Mishra <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Cc: [email protected] # v5.8+
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/tcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -940,7 +940,6 @@ static int nvme_tcp_try_send_data(struct
if (ret <= 0)
return ret;
- nvme_tcp_advance_req(req, ret);
if (queue->data_digest)
nvme_tcp_ddgst_update(queue->snd_hash, page,
offset, ret);
@@ -957,6 +956,7 @@ static int nvme_tcp_try_send_data(struct
}
return 1;
}
+ nvme_tcp_advance_req(req, ret);
}
return -EAGAIN;
}
From: Takashi Sakamoto <[email protected]>
commit 4c6fe8c547e3c9e8c15dabdd23c569ee0df3adb1 upstream.
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <[email protected]>
Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/dice/dice-tcelectronic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/firewire/dice/dice-tcelectronic.c
+++ b/sound/firewire/dice/dice-tcelectronic.c
@@ -38,8 +38,8 @@ static const struct dice_tc_spec konnekt
};
static const struct dice_tc_spec konnekt_live = {
- .tx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
- .rx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
+ .tx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
+ .rx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
.has_midi = true,
};
From: Varad Gautam <[email protected]>
commit a11ddb37bf367e6b5239b95ca759e5389bb46048 upstream.
do_mq_timedreceive calls wq_sleep with a stack local address. The
sender (do_mq_timedsend) uses this address to later call pipelined_send.
This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:
RIP: 0010:wake_q_add_safe+0x13/0x60
Call Trace:
__x64_sys_mq_timedsend+0x2a9/0x490
do_syscall_64+0x80/0x680
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f5928e40343
The race occurs as:
1. do_mq_timedreceive calls wq_sleep with the address of `struct
ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
holds a valid `struct ext_wait_queue *` as long as the stack has not
been overwritten.
2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
__pipelined_op.
3. Sender calls __pipelined_op::smp_store_release(&this->state,
STATE_READY). Here is where the race window begins. (`this` is
`ewq_addr`.)
4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
will see `state == STATE_READY` and break.
5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
stack. (Although the address may not get overwritten until another
function happens to touch it, which means it can persist around for an
indefinite time.)
6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
`struct ext_wait_queue *`, and uses it to find a task_struct to pass to
the wake_q_add_safe call. In the lucky case where nothing has
overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
bogus address as the receiver's task_struct causing the crash.
do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.
As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix
those in the same way.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <[email protected]>
Reported-by: Matthias von Faber <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Acked-by: Manfred Spraul <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/mqueue.c | 6 ++++--
ipc/msg.c | 6 ++++--
ipc/sem.c | 6 ++++--
3 files changed, 12 insertions(+), 6 deletions(-)
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -1004,12 +1004,14 @@ static inline void __pipelined_op(struct
struct mqueue_inode_info *info,
struct ext_wait_queue *this)
{
+ struct task_struct *task;
+
list_del(&this->list);
- get_task_struct(this->task);
+ task = get_task_struct(this->task);
/* see MQ_BARRIER for purpose/pairing */
smp_store_release(&this->state, STATE_READY);
- wake_q_add_safe(wake_q, this->task);
+ wake_q_add_safe(wake_q, task);
}
/* pipelined_send() - send a message directly to the task waiting in
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -251,11 +251,13 @@ static void expunge_all(struct msg_queue
struct msg_receiver *msr, *t;
list_for_each_entry_safe(msr, t, &msq->q_receivers, r_list) {
- get_task_struct(msr->r_tsk);
+ struct task_struct *r_tsk;
+
+ r_tsk = get_task_struct(msr->r_tsk);
/* see MSG_BARRIER for purpose/pairing */
smp_store_release(&msr->r_msg, ERR_PTR(res));
- wake_q_add_safe(wake_q, msr->r_tsk);
+ wake_q_add_safe(wake_q, r_tsk);
}
}
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -784,12 +784,14 @@ would_block:
static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
struct wake_q_head *wake_q)
{
- get_task_struct(q->sleeper);
+ struct task_struct *sleeper;
+
+ sleeper = get_task_struct(q->sleeper);
/* see SEM_BARRIER_2 for purpuse/pairing */
smp_store_release(&q->status, error);
- wake_q_add_safe(wake_q, q->sleeper);
+ wake_q_add_safe(wake_q, sleeper);
}
static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
From: Phillip Potter <[email protected]>
commit 2f4a784f40f8d337d6590e2e93f46429052e15ac upstream.
Move ufshcd_set_variant call in ufs_hisi_init_common to common error
section at end of the function, and then jump to this from the error
checking statements for both devm_reset_control_get and
ufs_hisi_get_resource. This fixes the original commit (63a06181d7ce)
which was reverted due to the University of Minnesota problems.
Suggested-by: Greg Kroah-Hartman <[email protected]>
Cc: Avri Altman <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ufs/ufs-hisi.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -467,17 +467,24 @@ static int ufs_hisi_init_common(struct u
host->hba = hba;
ufshcd_set_variant(hba, host);
- host->rst = devm_reset_control_get(dev, "rst");
+ host->rst = devm_reset_control_get(dev, "rst");
+ if (IS_ERR(host->rst)) {
+ dev_err(dev, "%s: failed to get reset control\n", __func__);
+ err = PTR_ERR(host->rst);
+ goto error;
+ }
ufs_hisi_set_pm_lvl(hba);
err = ufs_hisi_get_resource(host);
- if (err) {
- ufshcd_set_variant(hba, NULL);
- return err;
- }
+ if (err)
+ goto error;
return 0;
+
+error:
+ ufshcd_set_variant(hba, NULL);
+ return err;
}
static int ufs_hi3660_init(struct ufs_hba *hba)
From: Jan Beulich <[email protected]>
commit c81d3d24602540f65256f98831d0a25599ea6b87 upstream.
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <[email protected]>
Cc: [email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/xen-pciback/xenbus.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -359,7 +359,8 @@ out:
return err;
}
-static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev)
+static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev,
+ enum xenbus_state state)
{
int err = 0;
int num_devs;
@@ -373,9 +374,7 @@ static int xen_pcibk_reconfigure(struct
dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");
mutex_lock(&pdev->dev_lock);
- /* Make sure we only reconfigure once */
- if (xenbus_read_driver_state(pdev->xdev->nodename) !=
- XenbusStateReconfiguring)
+ if (xenbus_read_driver_state(pdev->xdev->nodename) != state)
goto out;
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
@@ -500,6 +499,10 @@ static int xen_pcibk_reconfigure(struct
}
}
+ if (state != XenbusStateReconfiguring)
+ /* Make sure we only reconfigure once. */
+ goto out;
+
err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured);
if (err) {
xenbus_dev_fatal(pdev->xdev, err,
@@ -525,7 +528,7 @@ static void xen_pcibk_frontend_changed(s
break;
case XenbusStateReconfiguring:
- xen_pcibk_reconfigure(pdev);
+ xen_pcibk_reconfigure(pdev, XenbusStateReconfiguring);
break;
case XenbusStateConnected:
@@ -664,6 +667,15 @@ static void xen_pcibk_be_watch(struct xe
xen_pcibk_setup_backend(pdev);
break;
+ case XenbusStateInitialised:
+ /*
+ * We typically move to Initialised when the first device was
+ * added. Hence subsequent devices getting added may need
+ * reconfiguring.
+ */
+ xen_pcibk_reconfigure(pdev, XenbusStateInitialised);
+ break;
+
default:
break;
}
From: Jan Beulich <[email protected]>
commit 4ba50e7c423c29639878c00573288869aa627068 upstream.
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots")
Signed-off-by: Jan Beulich <[email protected]>
Cc: [email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/xen-pciback/vpci.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -70,7 +70,7 @@ static int __xen_pcibk_add_pci_dev(struc
struct pci_dev *dev, int devid,
publish_pci_dev_cb publish_cb)
{
- int err = 0, slot, func = -1;
+ int err = 0, slot, func = PCI_FUNC(dev->devfn);
struct pci_dev_entry *t, *dev_entry;
struct vpci_dev_data *vpci_dev = pdev->pci_dev_data;
@@ -95,22 +95,25 @@ static int __xen_pcibk_add_pci_dev(struc
/*
* Keep multi-function devices together on the virtual PCI bus, except
- * virtual functions.
+ * that we want to keep virtual functions at func 0 on their own. They
+ * aren't multi-function devices and hence their presence at func 0
+ * may cause guests to not scan the other functions.
*/
- if (!dev->is_virtfn) {
+ if (!dev->is_virtfn || func) {
for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
if (list_empty(&vpci_dev->dev_list[slot]))
continue;
t = list_entry(list_first(&vpci_dev->dev_list[slot]),
struct pci_dev_entry, list);
+ if (t->dev->is_virtfn && !PCI_FUNC(t->dev->devfn))
+ continue;
if (match_slot(dev, t->dev)) {
dev_info(&dev->dev, "vpci: assign to virtual slot %d func %d\n",
- slot, PCI_FUNC(dev->devfn));
+ slot, func);
list_add_tail(&dev_entry->list,
&vpci_dev->dev_list[slot]);
- func = PCI_FUNC(dev->devfn);
goto unlock;
}
}
@@ -123,7 +126,6 @@ static int __xen_pcibk_add_pci_dev(struc
slot);
list_add_tail(&dev_entry->list,
&vpci_dev->dev_list[slot]);
- func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn);
goto unlock;
}
}
From: Mikulas Patocka <[email protected]>
commit c699a0db2d62e3bbb7f0bf35c87edbc8d23e3062 upstream.
The following commands will crash the kernel:
modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"
The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.
In order to fix the bug, we set the variable "r" to -EINVAL.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-snap.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1407,6 +1407,7 @@ static int snapshot_ctr(struct dm_target
if (!s->store->chunk_size) {
ti->error = "Chunk size not set";
+ r = -EINVAL;
goto bad_read_metadata;
}
From: Greg Kroah-Hartman <[email protected]>
commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream.
This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all so
just revert it. Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.
Cc: Kangjie Lu <[email protected]>
Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe")
Cc: stable <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/lm80.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -596,7 +596,6 @@ static int lm80_probe(struct i2c_client
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct lm80_data *data;
- int rv;
data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
if (!data)
@@ -609,14 +608,8 @@ static int lm80_probe(struct i2c_client
lm80_init_client(client);
/* A few vars need to be filled upon startup */
- rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
- if (rv < 0)
- return rv;
- data->fan[f_min][0] = rv;
- rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
- if (rv < 0)
- return rv;
- data->fan[f_min][1] = rv;
+ data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+ data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data, lm80_groups);
From: Simon Rettberg <[email protected]>
commit 023dfa9602f561952c0e19d74f66614a56d7e57a upstream.
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.
Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-by: Manuel Bentele <[email protected]>
Signed-off-by: Simon Rettberg <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
(cherry picked from commit 929b734ad34b717d6a1b8de97f53bb5616040147)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/gen7_renderclear.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gt/gen7_renderclear.c
+++ b/drivers/gpu/drm/i915/gt/gen7_renderclear.c
@@ -397,7 +397,10 @@ static void emit_batch(struct i915_vma *
gen7_emit_pipeline_invalidate(&cmds);
batch_add(&cmds, MI_LOAD_REGISTER_IMM(2));
batch_add(&cmds, i915_mmio_reg_offset(CACHE_MODE_0_GEN7));
- batch_add(&cmds, 0xffff0000);
+ batch_add(&cmds, 0xffff0000 |
+ ((IS_IVB_GT1(i915) || IS_VALLEYVIEW(i915)) ?
+ HIZ_RAW_STALL_OPT_DISABLE :
+ 0));
batch_add(&cmds, i915_mmio_reg_offset(CACHE_MODE_1));
batch_add(&cmds, 0xffff0000 | PIXEL_SUBSPAN_COLLECT_OPT_DISABLE);
gen7_emit_pipeline_invalidate(&cmds);
From: Greg Kroah-Hartman <[email protected]>
commit ed04fe8a0e87d7b5ea17d47f4ac9ec962b24814a upstream.
This reverts commit 1d84353d205a953e2381044953b7fa31c8c9702d.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.
Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.
Cc: Kangjie Lu <[email protected]>
Cc: Aditya Pakki <[email protected]>
Cc: Finn Thain <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Fixes: 1d84353d205a ("video: imsttfb: fix potential NULL pointer dereferences")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/imsttfb.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -1512,11 +1512,6 @@ static int imsttfb_probe(struct pci_dev
info->fix.smem_start = addr;
info->screen_base = (__u8 *)ioremap(addr, par->ramdac == IBM ?
0x400000 : 0x800000);
- if (!info->screen_base) {
- release_mem_region(addr, size);
- framebuffer_release(info);
- return -ENOMEM;
- }
info->fix.mmio_start = addr + 0x800000;
par->dc_regs = ioremap(addr + 0x800000, 0x1000);
par->cmap_regs_phys = addr + 0x840000;
From: Darrick J. Wong <[email protected]>
commit a73b6a3b4109ce2ed01dbc51a6c1551a6431b53c upstream.
In commit b05ae01fdb89, someone tried to make the driver handle i2c read
errors by simply zeroing out the register contents, but for some reason
left unaltered the code that sets the cached register value the function
call return value.
The original patch was authored by a member of the Underhanded
Mangle-happy Nerds, I'm not terribly surprised. I don't have the
hardware anymore so I can't test this, but it seems like a pretty
obvious API usage fix to me...
Fixes: b05ae01fdb89 ("misc/ics932s401: Add a missing check to i2c_smbus_read_word_data")
Signed-off-by: Darrick J. Wong <[email protected]>
Link: https://lore.kernel.org/r/20210428222534.GJ3122264@magnolia
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/ics932s401.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
index 2bdf560ee681..0f9ea75b0b18 100644
--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -134,7 +134,7 @@ static struct ics932s401_data *ics932s401_update_device(struct device *dev)
for (i = 0; i < NUM_MIRRORED_REGS; i++) {
temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
if (temp < 0)
- data->regs[regs_to_copy[i]] = 0;
+ temp = 0;
data->regs[regs_to_copy[i]] = temp >> 8;
}
--
2.31.1
From: Christoph Hellwig <[email protected]>
commit 5e1f689913a4498e3081093670ef9d85b2c60920 upstream.
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Martin Wilck <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 3 +-
drivers/nvme/host/multipath.c | 55 ++++++++++++++++++++++--------------------
drivers/nvme/host/nvme.h | 8 ++++--
3 files changed, 37 insertions(+), 29 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3190,7 +3190,7 @@ int nvme_init_identify(struct nvme_ctrl
ctrl->hmmaxd = le16_to_cpu(id->hmmaxd);
}
- ret = nvme_mpath_init(ctrl, id);
+ ret = nvme_mpath_init_identify(ctrl, id);
kfree(id);
if (ret < 0)
@@ -4580,6 +4580,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctr
min(default_ps_max_latency_us, (unsigned long)S32_MAX));
nvme_fault_inject_init(&ctrl->fault_inject, dev_name(ctrl->device));
+ nvme_mpath_init_ctrl(ctrl);
return 0;
out_free_name:
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -709,9 +709,18 @@ void nvme_mpath_remove_disk(struct nvme_
put_disk(head->disk);
}
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
{
- int error;
+ mutex_init(&ctrl->ana_lock);
+ timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
+ INIT_WORK(&ctrl->ana_work, nvme_ana_work);
+}
+
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+{
+ size_t max_transfer_size = ctrl->max_hw_sectors << SECTOR_SHIFT;
+ size_t ana_log_size;
+ int error = 0;
/* check if multipath is enabled and we have the capability */
if (!multipath || !ctrl->subsys ||
@@ -723,37 +732,31 @@ int nvme_mpath_init(struct nvme_ctrl *ct
ctrl->nanagrpid = le32_to_cpu(id->nanagrpid);
ctrl->anagrpmax = le32_to_cpu(id->anagrpmax);
- mutex_init(&ctrl->ana_lock);
- timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
- ctrl->ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
- ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc);
- ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32);
-
- if (ctrl->ana_log_size > ctrl->max_hw_sectors << SECTOR_SHIFT) {
+ ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
+ ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc) +
+ ctrl->max_namespaces * sizeof(__le32);
+ if (ana_log_size > max_transfer_size) {
dev_err(ctrl->device,
- "ANA log page size (%zd) larger than MDTS (%d).\n",
- ctrl->ana_log_size,
- ctrl->max_hw_sectors << SECTOR_SHIFT);
+ "ANA log page size (%zd) larger than MDTS (%zd).\n",
+ ana_log_size, max_transfer_size);
dev_err(ctrl->device, "disabling ANA support.\n");
- return 0;
+ goto out_uninit;
}
-
- INIT_WORK(&ctrl->ana_work, nvme_ana_work);
- kfree(ctrl->ana_log_buf);
- ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
- if (!ctrl->ana_log_buf) {
- error = -ENOMEM;
- goto out;
+ if (ana_log_size > ctrl->ana_log_size) {
+ nvme_mpath_stop(ctrl);
+ kfree(ctrl->ana_log_buf);
+ ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
+ if (!ctrl->ana_log_buf)
+ return -ENOMEM;
}
-
+ ctrl->ana_log_size = ana_log_size;
error = nvme_read_ana_log(ctrl);
if (error)
- goto out_free_ana_log_buf;
+ goto out_uninit;
return 0;
-out_free_ana_log_buf:
- kfree(ctrl->ana_log_buf);
- ctrl->ana_log_buf = NULL;
-out:
+
+out_uninit:
+ nvme_mpath_uninit(ctrl);
return error;
}
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -668,7 +668,8 @@ void nvme_kick_requeue_lists(struct nvme
int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id);
void nvme_mpath_remove_disk(struct nvme_ns_head *head);
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl);
void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
void nvme_mpath_stop(struct nvme_ctrl *ctrl);
bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
@@ -742,7 +743,10 @@ static inline void nvme_mpath_check_last
static inline void nvme_trace_bio_complete(struct request *req)
{
}
-static inline int nvme_mpath_init(struct nvme_ctrl *ctrl,
+static inline void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
+{
+}
+static inline int nvme_mpath_init_identify(struct nvme_ctrl *ctrl,
struct nvme_id_ctrl *id)
{
if (ctrl->subsys->cmic & (1 << 3))
From: Joerg Roedel <[email protected]>
commit fef81c86262879d4b1176ef51a834c15b805ebb9 upstream.
Check whether the hypervisor reported the correct C-bit when running
as an SEV guest. Using a wrong C-bit position could be used to leak
sensitive data from the guest to the hypervisor.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/boot/compressed/head_64.S | 85 +++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -172,11 +172,21 @@ SYM_FUNC_START(startup_32)
*/
call get_sev_encryption_bit
xorl %edx, %edx
+#ifdef CONFIG_AMD_MEM_ENCRYPT
testl %eax, %eax
jz 1f
subl $32, %eax /* Encryption bit is always above bit 31 */
bts %eax, %edx /* Set encryption mask for page tables */
+ /*
+ * Mark SEV as active in sev_status so that startup32_check_sev_cbit()
+ * will do a check. The sev_status memory will be fully initialized
+ * with the contents of MSR_AMD_SEV_STATUS later in
+ * set_sev_encryption_mask(). For now it is sufficient to know that SEV
+ * is active.
+ */
+ movl $1, rva(sev_status)(%ebp)
1:
+#endif
/* Initialize Page tables to 0 */
leal rva(pgtable)(%ebx), %edi
@@ -261,6 +271,9 @@ SYM_FUNC_START(startup_32)
movl %esi, %edx
1:
#endif
+ /* Check if the C-bit position is correct when SEV is active */
+ call startup32_check_sev_cbit
+
pushl $__KERNEL_CS
pushl %eax
@@ -787,6 +800,78 @@ SYM_DATA_END(loaded_image_proto)
#endif
/*
+ * Check for the correct C-bit position when the startup_32 boot-path is used.
+ *
+ * The check makes use of the fact that all memory is encrypted when paging is
+ * disabled. The function creates 64 bits of random data using the RDRAND
+ * instruction. RDRAND is mandatory for SEV guests, so always available. If the
+ * hypervisor violates that the kernel will crash right here.
+ *
+ * The 64 bits of random data are stored to a memory location and at the same
+ * time kept in the %eax and %ebx registers. Since encryption is always active
+ * when paging is off the random data will be stored encrypted in main memory.
+ *
+ * Then paging is enabled. When the C-bit position is correct all memory is
+ * still mapped encrypted and comparing the register values with memory will
+ * succeed. An incorrect C-bit position will map all memory unencrypted, so that
+ * the compare will use the encrypted random data and fail.
+ */
+ __HEAD
+ .code32
+SYM_FUNC_START(startup32_check_sev_cbit)
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+ pushl %eax
+ pushl %ebx
+ pushl %ecx
+ pushl %edx
+
+ /* Check for non-zero sev_status */
+ movl rva(sev_status)(%ebp), %eax
+ testl %eax, %eax
+ jz 4f
+
+ /*
+ * Get two 32-bit random values - Don't bail out if RDRAND fails
+ * because it is better to prevent forward progress if no random value
+ * can be gathered.
+ */
+1: rdrand %eax
+ jnc 1b
+2: rdrand %ebx
+ jnc 2b
+
+ /* Store to memory and keep it in the registers */
+ movl %eax, rva(sev_check_data)(%ebp)
+ movl %ebx, rva(sev_check_data+4)(%ebp)
+
+ /* Enable paging to see if encryption is active */
+ movl %cr0, %edx /* Backup %cr0 in %edx */
+ movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
+ movl %ecx, %cr0
+
+ cmpl %eax, rva(sev_check_data)(%ebp)
+ jne 3f
+ cmpl %ebx, rva(sev_check_data+4)(%ebp)
+ jne 3f
+
+ movl %edx, %cr0 /* Restore previous %cr0 */
+
+ jmp 4f
+
+3: /* Check failed - hlt the machine */
+ hlt
+ jmp 3b
+
+4:
+ popl %edx
+ popl %ecx
+ popl %ebx
+ popl %eax
+#endif
+ ret
+SYM_FUNC_END(startup32_check_sev_cbit)
+
+/*
* Stack and heap for uncompression
*/
.bss
From: Greg Kroah-Hartman <[email protected]>
commit e1436df2f2550bc89d832ffd456373fdf5d5b5d7 upstream.
This reverts commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true. As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.
Cc: Aditya Pakki <[email protected]>
Fixes: 2c2a7552dd64 ("ecryptfs: replace BUG_ON with error handling code")
Cc: stable <[email protected]>
Acked-by: Tyler Hicks <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ecryptfs/crypto.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -296,10 +296,8 @@ static int crypt_scatterlist(struct ecry
struct extent_crypt_result ecr;
int rc = 0;
- if (!crypt_stat || !crypt_stat->tfm
- || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED))
- return -EINVAL;
-
+ BUG_ON(!crypt_stat || !crypt_stat->tfm
+ || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED));
if (unlikely(ecryptfs_verbosity > 0)) {
ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n",
crypt_stat->key_size);
From: Arnd Bergmann <[email protected]>
commit 976aac5f882989e4f6c1b3a7224819bf0e801c6a upstream.
clang with CONFIG_LTO_CLANG points out that an initcall function should
return an 'int' due to the changes made to the initcall macros in commit
3578ad11f3fb ("init: lto: fix PREL32 relocations"):
kernel/kcsan/debugfs.c:274:15: error: returning 'void' from a function with incompatible result type 'int'
late_initcall(kcsan_debugfs_init);
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
include/linux/init.h:292:46: note: expanded from macro 'late_initcall'
#define late_initcall(fn) __define_initcall(fn, 7)
Fixes: e36299efe7d7 ("kcsan, debugfs: Move debugfs file creation out of early init")
Cc: stable <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/kcsan/debugfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/kcsan/debugfs.c
+++ b/kernel/kcsan/debugfs.c
@@ -261,9 +261,10 @@ static const struct file_operations debu
.release = single_release
};
-static void __init kcsan_debugfs_init(void)
+static int __init kcsan_debugfs_init(void)
{
debugfs_create_file("kcsan", 0644, NULL, NULL, &debugfs_ops);
+ return 0;
}
late_initcall(kcsan_debugfs_init);
From: Tom Lendacky <[email protected]>
commit fea63d54f7a3e74f8ab489a8b82413a29849a594 upstream.
Move the location of sev_es_put_ghcb() in preparation for an update to it
in a follow-on patch. This will better highlight the changes being made
to the function.
No functional change.
Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/8c07662ec17d3d82e5c53841a1d9e766d3bdbab6.1621273353.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/sev-es.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -209,24 +209,6 @@ static __always_inline struct ghcb *sev_
return ghcb;
}
-static __always_inline void sev_es_put_ghcb(struct ghcb_state *state)
-{
- struct sev_es_runtime_data *data;
- struct ghcb *ghcb;
-
- data = this_cpu_read(runtime_data);
- ghcb = &data->ghcb_page;
-
- if (state->ghcb) {
- /* Restore GHCB from Backup */
- *ghcb = *state->ghcb;
- data->backup_ghcb_active = false;
- state->ghcb = NULL;
- } else {
- data->ghcb_active = false;
- }
-}
-
/* Needed in vc_early_forward_exception */
void do_early_exception(struct pt_regs *regs, int trapnr);
@@ -434,6 +416,24 @@ static enum es_result vc_slow_virt_to_ph
/* Include code shared with pre-decompression boot stage */
#include "sev-es-shared.c"
+static __always_inline void sev_es_put_ghcb(struct ghcb_state *state)
+{
+ struct sev_es_runtime_data *data;
+ struct ghcb *ghcb;
+
+ data = this_cpu_read(runtime_data);
+ ghcb = &data->ghcb_page;
+
+ if (state->ghcb) {
+ /* Restore GHCB from Backup */
+ *ghcb = *state->ghcb;
+ data->backup_ghcb_active = false;
+ state->ghcb = NULL;
+ } else {
+ data->ghcb_active = false;
+ }
+}
+
void noinstr __sev_es_nmi_complete(void)
{
struct ghcb_state state;
From: Greg Kroah-Hartman <[email protected]>
commit 9183f01b5e6e32eb3f17b5f3f8d5ad5ac9786c49 upstream.
As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems. Fix this up by just initializing the
whole thing to 0 at probe() time.
Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.
Reported-by: Peter Rosin <[email protected]>
Cc: Jens Axboe <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cdrom/gdrom.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -743,6 +743,13 @@ static const struct blk_mq_ops gdrom_mq_
static int probe_gdrom(struct platform_device *devptr)
{
int err;
+
+ /*
+ * Ensure our "one" device is initialized properly in case of previous
+ * usages of it
+ */
+ memset(&gd, 0, sizeof(gd));
+
/* Start the device */
if (gdrom_execute_diagnostic() != 1) {
pr_warn("ATA Probe for GDROM failed\n");
@@ -848,7 +855,7 @@ static struct platform_driver gdrom_driv
static int __init init_gdrom(void)
{
int rc;
- gd.toc = NULL;
+
rc = platform_driver_register(&gdrom_driver);
if (rc)
return rc;
From: Greg Kroah-Hartman <[email protected]>
commit bee1b0511844c8c79fccf1f2b13472393b6b91f7 upstream.
This reverts commit f86a3b83833e7cfe558ca4d70b64ebc48903efec.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit causes a memory leak when it is trying to claim it
is properly handling errors. Revert this change and fix it up properly
in a follow-on commit.
Cc: Kangjie Lu <[email protected]>
Cc: David S. Miller <[email protected]>
Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index 527077c98ebc..fc68e90acbea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -50,9 +50,7 @@ static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
gmac->clk_enabled = 1;
} else {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
- ret = clk_prepare(gmac->tx_clk);
- if (ret)
- return ret;
+ clk_prepare(gmac->tx_clk);
}
return 0;
--
2.31.1
From: Igor Matheus Andrade Torrente <[email protected]>
commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.
The return of ioremap if not checked, and can lead to a NULL to be
assigned to hga_vram. Potentially leading to a NULL pointer
dereference.
The fix adds code to deal with this case in the error label and
changes how the hgafb_probe handles the return of hga_card_detect.
Cc: Ferenc Bakonyi <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Igor Matheus Andrade Torrente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/hgafb.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,6 +285,8 @@ static int hga_card_detect(void)
hga_vram_len = 0x08000;
hga_vram = ioremap(0xb0000, hga_vram_len);
+ if (!hga_vram)
+ return -ENOMEM;
if (request_region(0x3b0, 12, "hgafb"))
release_io_ports = 1;
@@ -344,13 +346,18 @@ static int hga_card_detect(void)
hga_type_name = "Hercules";
break;
}
- return 1;
+ return 0;
error:
if (release_io_ports)
release_region(0x3b0, 12);
if (release_io_port)
release_region(0x3bf, 1);
- return 0;
+
+ iounmap(hga_vram);
+
+ pr_err("hgafb: HGA card not detected.\n");
+
+ return -EINVAL;
}
/**
@@ -548,13 +555,11 @@ static const struct fb_ops hgafb_ops = {
static int hgafb_probe(struct platform_device *pdev)
{
struct fb_info *info;
+ int ret;
- if (! hga_card_detect()) {
- printk(KERN_INFO "hgafb: HGA card not detected.\n");
- if (hga_vram)
- iounmap(hga_vram);
- return -EINVAL;
- }
+ ret = hga_card_detect();
+ if (!ret)
+ return ret;
printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
hga_type_name, hga_vram_len/1024);
From: Greg Kroah-Hartman <[email protected]>
commit 30b0e0ee9d02b97b68705c46b41444786effc40c upstream.
If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.
Cc: Kalle Valo <[email protected]>
Cc: Bryan Brattlof <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/base.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -440,9 +440,14 @@ static void rtl_watchdog_wq_callback(str
static void rtl_fwevt_wq_callback(struct work_struct *work);
static void rtl_c2hcmd_wq_callback(struct work_struct *work);
-static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+static int _rtl_init_deferred_work(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct workqueue_struct *wq;
+
+ wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+ if (!wq)
+ return -ENOMEM;
/* <1> timer */
timer_setup(&rtlpriv->works.watchdog_timer,
@@ -451,7 +456,8 @@ static void _rtl_init_deferred_work(stru
rtl_easy_concurrent_retrytimer_callback, 0);
/* <2> work queue */
rtlpriv->works.hw = hw;
- rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+ rtlpriv->works.rtl_wq = wq;
+
INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
rtl_watchdog_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
@@ -461,6 +467,7 @@ static void _rtl_init_deferred_work(stru
rtl_swlps_rfon_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.fwevt_wq, rtl_fwevt_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.c2hcmd_wq, rtl_c2hcmd_wq_callback);
+ return 0;
}
void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq)
@@ -560,9 +567,7 @@ int rtl_init_core(struct ieee80211_hw *h
rtlmac->link_state = MAC80211_NOLINK;
/* <6> init deferred work */
- _rtl_init_deferred_work(hw);
-
- return 0;
+ return _rtl_init_deferred_work(hw);
}
EXPORT_SYMBOL_GPL(rtl_init_core);
From: Tetsuo Handa <[email protected]>
commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream.
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/kd.h>
#include <linux/vt.h>
int main(int argc, char *argv[])
{
const int fd = open("/dev/char/4:1", O_RDWR);
struct vt_sizes vt = { 0x4100, 2 };
ioctl(fd, KDSETMODE, KD_GRAPHICS);
ioctl(fd, VT_RESIZE, &vt);
ioctl(fd, KDSETMODE, KD_TEXT);
return 0;
}
----------
Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().
Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1]
Reported-by: syzbot <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Tested-by: syzbot <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 2 +-
drivers/video/fbdev/core/fbcon.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1171,7 +1171,7 @@ static inline int resize_screen(struct v
/* Resizes the resolution of the display adapater */
int err = 0;
- if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_resize)
+ if (vc->vc_sw->con_resize)
err = vc->vc_sw->con_resize(vc, width, height, user);
return err;
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2019,7 +2019,7 @@ static int fbcon_resize(struct vc_data *
return -EINVAL;
pr_debug("resize now %ix%i\n", var.xres, var.yres);
- if (con_is_visible(vc)) {
+ if (con_is_visible(vc) && vc->vc_mode == KD_TEXT) {
var.activate = FB_ACTIVATE_NOW |
FB_ACTIVATE_FORCE;
fb_set_var(info, &var);
From: Atul Gopinathan <[email protected]>
commit d03d1021da6fe7f46efe9f2a7335564e7c9db5ab upstream.
The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.
Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".
The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".
Suggested-by: Jens Axboe <[email protected]>
Cc: Peter Rosin <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Atul Gopinathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cdrom/gdrom.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -831,6 +831,8 @@ static int remove_gdrom(struct platform_
if (gdrom_major)
unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
unregister_cdrom(gd.cd_info);
+ kfree(gd.cd_info);
+ kfree(gd.toc);
return 0;
}
@@ -862,7 +864,6 @@ static void __exit exit_gdrom(void)
{
platform_device_unregister(pd);
platform_driver_unregister(&gdrom_driver);
- kfree(gd.toc);
}
module_init(init_gdrom);
From: Anirudh Rayabharam <[email protected]>
commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream.
In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().
Signed-off-by: Anirudh Rayabharam <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -30,7 +30,7 @@ struct sunxi_priv_data {
static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
{
struct sunxi_priv_data *gmac = priv;
- int ret;
+ int ret = 0;
if (gmac->regulator) {
ret = regulator_enable(gmac->regulator);
@@ -50,10 +50,12 @@ static int sun7i_gmac_init(struct platfo
gmac->clk_enabled = 1;
} else {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
- clk_prepare(gmac->tx_clk);
+ ret = clk_prepare(gmac->tx_clk);
+ if (ret && gmac->regulator)
+ regulator_disable(gmac->regulator);
}
- return 0;
+ return ret;
}
static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
From: Greg Kroah-Hartman <[email protected]>
commit b95b57dfe7a142bf2446548eb7f49340fd73e78b upstream.
This reverts commit 5bf7295fe34a5251b1d241b9736af4697b590670.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.
Cc: Aditya Pakki <[email protected]>
Cc: David S. Miller <[email protected]>
Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1047,8 +1047,6 @@ int qlcnic_do_lb_test(struct qlcnic_adap
for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
- if (!skb)
- break;
qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
skb_put(skb, QLCNIC_ILB_PKT_SIZE);
adapter->ahw->diag_cnt = 0;
From: Greg Kroah-Hartman <[email protected]>
commit 4d427b408c4c2ff1676966c72119a3a559f8e39b upstream.
This reverts commit 63a06181d7ce169d09843645c50fea1901bc9f0a.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit is incorrect, it does not properly clean up on the
error path, so I'll keep the revert and fix it up properly with a
follow-on patch.
Cc: Kangjie Lu <[email protected]>
Cc: Avri Altman <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Fixes: 63a06181d7ce ("scsi: ufs: fix a missing check of devm_reset_control_get")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/ufs/ufs-hisi.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -468,10 +468,6 @@ static int ufs_hisi_init_common(struct u
ufshcd_set_variant(hba, host);
host->rst = devm_reset_control_get(dev, "rst");
- if (IS_ERR(host->rst)) {
- dev_err(dev, "%s: failed to get reset control\n", __func__);
- return PTR_ERR(host->rst);
- }
ufs_hisi_set_pm_lvl(hba);
From: Maciej W. Rozycki <[email protected]>
commit a90c275eb144c1b755f04769e1f29d832d6daeaf upstream.
Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.
As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank. The proportions change according to
text mode geometries chosen.
Revert the change verbatim then, bringing back previous VT resizing.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE")
Cc: [email protected] # v5.10+
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 57 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 47 insertions(+), 10 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -671,21 +671,58 @@ static int vt_resizex(struct vc_data *vc
if (copy_from_user(&v, cs, sizeof(struct vt_consize)))
return -EFAULT;
- if (v.v_vlin)
- pr_info_once("\"struct vt_consize\"->v_vlin is ignored. Please report if you need this.\n");
- if (v.v_clin)
- pr_info_once("\"struct vt_consize\"->v_clin is ignored. Please report if you need this.\n");
+ /* FIXME: Should check the copies properly */
+ if (!v.v_vlin)
+ v.v_vlin = vc->vc_scan_lines;
+
+ if (v.v_clin) {
+ int rows = v.v_vlin / v.v_clin;
+ if (v.v_rows != rows) {
+ if (v.v_rows) /* Parameters don't add up */
+ return -EINVAL;
+ v.v_rows = rows;
+ }
+ }
+
+ if (v.v_vcol && v.v_ccol) {
+ int cols = v.v_vcol / v.v_ccol;
+ if (v.v_cols != cols) {
+ if (v.v_cols)
+ return -EINVAL;
+ v.v_cols = cols;
+ }
+ }
+
+ if (v.v_clin > 32)
+ return -EINVAL;
- console_lock();
for (i = 0; i < MAX_NR_CONSOLES; i++) {
- vc = vc_cons[i].d;
+ struct vc_data *vcp;
+
+ if (!vc_cons[i].d)
+ continue;
+ console_lock();
+ vcp = vc_cons[i].d;
+ if (vcp) {
+ int ret;
+ int save_scan_lines = vcp->vc_scan_lines;
+ int save_font_height = vcp->vc_font.height;
- if (vc) {
- vc->vc_resize_user = 1;
- vc_resize(vc, v.v_cols, v.v_rows);
+ if (v.v_vlin)
+ vcp->vc_scan_lines = v.v_vlin;
+ if (v.v_clin)
+ vcp->vc_font.height = v.v_clin;
+ vcp->vc_resize_user = 1;
+ ret = vc_resize(vcp, v.v_cols, v.v_rows);
+ if (ret) {
+ vcp->vc_scan_lines = save_scan_lines;
+ vcp->vc_font.height = save_font_height;
+ console_unlock();
+ return ret;
+ }
}
+ console_unlock();
}
- console_unlock();
return 0;
}
From: Greg Kroah-Hartman <[email protected]>
commit 58c0cc2d90f1e37c4eb63ae7f164c83830833f78 upstream.
This reverts commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.
So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all. I'll go fix this up properly...
Cc: Kangjie Lu <[email protected]>
Cc: Aditya Pakki <[email protected]>
Cc: Ferenc Bakonyi <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Fixes: ec7f6aad57ad ("video: hgafb: fix potential NULL pointer dereference")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/hgafb.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,8 +285,6 @@ static int hga_card_detect(void)
hga_vram_len = 0x08000;
hga_vram = ioremap(0xb0000, hga_vram_len);
- if (!hga_vram)
- goto error;
if (request_region(0x3b0, 12, "hgafb"))
release_io_ports = 1;
From: Francois Gervais <[email protected]>
commit 03531606ef4cda25b629f500d1ffb6173b805c05 upstream.
The rtc device node is always NULL.
Since v5.12-rc1-dontuse/3c9ea42802a1fbf7ef29660ff8c6e526c58114f6 this
will lead to a NULL pointer dereference.
To fix this use the parent node which is the i2c client node as set by
devm_rtc_allocate_device().
Using the i2c client node seems to be what other similar drivers do
e.g. rtc-pcf8563.c.
Signed-off-by: Francois Gervais <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pcf85063.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -478,6 +478,7 @@ static struct clk *pcf85063_clkout_regis
{
struct clk *clk;
struct clk_init_data init;
+ struct device_node *node = pcf85063->rtc->dev.parent->of_node;
init.name = "pcf85063-clkout";
init.ops = &pcf85063_clkout_ops;
@@ -487,15 +488,13 @@ static struct clk *pcf85063_clkout_regis
pcf85063->clkout_hw.init = &init;
/* optional override of the clockname */
- of_property_read_string(pcf85063->rtc->dev.of_node,
- "clock-output-names", &init.name);
+ of_property_read_string(node, "clock-output-names", &init.name);
/* register the clock */
clk = devm_clk_register(&pcf85063->rtc->dev, &pcf85063->clkout_hw);
if (!IS_ERR(clk))
- of_clk_add_provider(pcf85063->rtc->dev.of_node,
- of_clk_src_simple_get, clk);
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
return clk;
}
From: Mike Rapoport <[email protected]>
commit 4eff124347191d1548eb4e14e20e77513dcbd0fe upstream.
Kernel test robot reports:
cppcheck possible warnings: (new ones prefixed by >>, may not real problems)
>> arch/openrisc/mm/init.c:125:10: warning: Uninitialized variable: region [uninitvar]
region->base, region->base + region->size);
^
Replace usage of memblock_region fields with 'start' and 'end' variables
that are initialized in for_each_mem_range() and remove the declaration of
region.
Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/openrisc/mm/init.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/openrisc/mm/init.c
+++ b/arch/openrisc/mm/init.c
@@ -75,7 +75,6 @@ static void __init map_ram(void)
/* These mark extents of read-only kernel pages...
* ...from vmlinux.lds.S
*/
- struct memblock_region *region;
v = PAGE_OFFSET;
@@ -121,7 +120,7 @@ static void __init map_ram(void)
}
printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
- region->base, region->base + region->size);
+ start, end);
}
}
From: Tom Seewald <[email protected]>
commit 84460f01cba382553199bc1361f69a872d5abed4 upstream.
The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.
Cc: David S. Miller <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Tom Seewald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1047,6 +1047,8 @@ int qlcnic_do_lb_test(struct qlcnic_adap
for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+ if (!skb)
+ goto error;
qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
skb_put(skb, QLCNIC_ILB_PKT_SIZE);
adapter->ahw->diag_cnt = 0;
@@ -1070,6 +1072,7 @@ int qlcnic_do_lb_test(struct qlcnic_adap
cnt++;
}
if (cnt != i) {
+error:
dev_err(&adapter->pdev->dev,
"LB Test: failed, TX[%d], RX[%d]\n", i, cnt);
if (mode != QLCNIC_ILB_MODE)
From: Phillip Potter <[email protected]>
commit 6647f7a06eb030a2384ec71f0bb2e78854afabfe upstream.
Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.
Cc: stable <[email protected]>
Acked-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/leds/leds-lp5523.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,7 +305,9 @@ static int lp5523_init_program_engine(st
/* Let the programs run for couple of ms and check the engine status */
usleep_range(3000, 6000);
- lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret)
+ goto out;
status &= LP5523_ENG_STATUS_MASK;
if (status != LP5523_ENG_STATUS_MASK) {
From: Jan Beulich <[email protected]>
commit ae897fda4f507e4b239f0bdfd578b3688ca96fb4 upstream.
xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.
[jgross] Note that this is a revert of 36104cb9012a82e73 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.
Cc: <stable.vger.kernel.org> # 5.9
Fixes: 36104cb9012a82e73 ("x86/xen: Delay get_cpu_cap until stack canary is established")
Reported-by: Olaf Hering <[email protected]>
Signed-off-by: Jan Beulich <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
---
arch/x86/xen/enlighten_pv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1276,16 +1276,16 @@ asmlinkage __visible void __init xen_sta
/* Get mfn list */
xen_build_dynamic_phys_to_machine();
+ /* Work out if we support NX */
+ get_cpu_cap(&boot_cpu_data);
+ x86_configure_nx();
+
/*
* Set up kernel GDT and segment registers, mainly so that
* -fstack-protector code can be executed.
*/
xen_setup_gdt(0);
- /* Work out if we support NX */
- get_cpu_cap(&boot_cpu_data);
- x86_configure_nx();
-
/* Determine virtual and physical address sizes */
get_cpu_address_sizes(&boot_cpu_data);
From: Greg Kroah-Hartman <[email protected]>
commit 3e465fc3846734e9489273d889f19cc17b4cf4bd upstream.
This reverts commit d39083234c60519724c6ed59509a2129fd2aed41.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.
Cc: Kangjie Lu <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Fixes: d39083234c60 ("media: rcar_drif: fix a memory disclosure")
Cc: stable <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Reviewed-by: Fabrizio Castro <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/rcar_drif.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -915,7 +915,6 @@ static int rcar_drif_g_fmt_sdr_cap(struc
{
struct rcar_drif_sdr *sdr = video_drvdata(file);
- memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
f->fmt.sdr.pixelformat = sdr->fmt->pixelformat;
f->fmt.sdr.buffersize = sdr->fmt->buffersize;
From: Greg Kroah-Hartman <[email protected]>
commit 8d1beda5f11953ffe135a5213287f0b25b4da41b upstream.
This reverts commit 248b57015f35c94d4eae2fdd8c6febf5cd703900.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.
Cc: Kangjie Lu <[email protected]>
Cc: Jacek Anaszewski <[email protected]>
Cc: stable <[email protected]>
Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/leds/leds-lp5523.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,9 +305,7 @@ static int lp5523_init_program_engine(st
/* Let the programs run for couple of ms and check the engine status */
usleep_range(3000, 6000);
- ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
- if (ret)
- return ret;
+ lp55xx_read(chip, LP5523_REG_STATUS, &status);
status &= LP5523_ENG_STATUS_MASK;
if (status != LP5523_ENG_STATUS_MASK) {
From: Greg Kroah-Hartman <[email protected]>
commit 257343d3ed557f11d580d0b7c515dc154f64a42b upstream.
This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix. Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.
Cc: Wenwen Wang <[email protected]>
Cc: Peter Rosin <[email protected]>
Cc: Jens Axboe <[email protected]>
Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cdrom/gdrom.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -863,7 +863,6 @@ static void __exit exit_gdrom(void)
platform_device_unregister(pd);
platform_driver_unregister(&gdrom_driver);
kfree(gd.toc);
- kfree(gd.cd_info);
}
module_init(init_gdrom);
From: Du Cheng <[email protected]>
commit e6e337708c22f80824b82d4af645f20715730ad0 upstream.
niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.
An examination of the callstack up to niu_pci_eeprom_read shows that:
niu_pci_eeprom_read() // returns int
niu_pci_vpd_scan_props() // returns int
niu_pci_vpd_fetch() // returns *void*
niu_get_invariants() // returns int
since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.
Signed-off-by: Du Cheng <[email protected]>
Cc: Shannon Nelson <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sun/niu.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,6 +8097,8 @@ static int niu_pci_vpd_scan_props(struct
start += 3;
prop_len = niu_pci_eeprom_read(np, start + 4);
+ if (prop_len < 0)
+ return prop_len;
err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
if (err < 0)
return err;
@@ -8141,8 +8143,12 @@ static int niu_pci_vpd_scan_props(struct
netif_printk(np, probe, KERN_DEBUG, np->dev,
"VPD_SCAN: Reading in property [%s] len[%d]\n",
namebuf, prop_len);
- for (i = 0; i < prop_len; i++)
- *prop_buf++ = niu_pci_eeprom_read(np, off + i);
+ for (i = 0; i < prop_len; i++) {
+ err = niu_pci_eeprom_read(np, off + i);
+ if (err < 0)
+ return err;
+ *prop_buf++ = err;
+ }
}
start += len;
@@ -8152,14 +8158,14 @@ static int niu_pci_vpd_scan_props(struct
}
/* ESPC_PIO_EN_ENABLE must be set */
-static void niu_pci_vpd_fetch(struct niu *np, u32 start)
+static int niu_pci_vpd_fetch(struct niu *np, u32 start)
{
u32 offset;
int err;
err = niu_pci_eeprom_read16_swp(np, start + 1);
if (err < 0)
- return;
+ return err;
offset = err + 3;
@@ -8168,12 +8174,14 @@ static void niu_pci_vpd_fetch(struct niu
u32 end;
err = niu_pci_eeprom_read(np, here);
+ if (err < 0)
+ return err;
if (err != 0x90)
- return;
+ return -EINVAL;
err = niu_pci_eeprom_read16_swp(np, here + 1);
if (err < 0)
- return;
+ return err;
here = start + offset + 3;
end = start + offset + err;
@@ -8181,9 +8189,12 @@ static void niu_pci_vpd_fetch(struct niu
offset += err;
err = niu_pci_vpd_scan_props(np, here, end);
- if (err < 0 || err == 1)
- return;
+ if (err < 0)
+ return err;
+ if (err == 1)
+ return -EINVAL;
}
+ return 0;
}
/* ESPC_PIO_EN_ENABLE must be set */
@@ -9274,8 +9285,11 @@ static int niu_get_invariants(struct niu
offset = niu_pci_vpd_offset(np);
netif_printk(np, probe, KERN_DEBUG, np->dev,
"%s() VPD offset [%08x]\n", __func__, offset);
- if (offset)
- niu_pci_vpd_fetch(np, offset);
+ if (offset) {
+ err = niu_pci_vpd_fetch(np, offset);
+ if (err < 0)
+ return err;
+ }
nw64(ESPC_PIO_EN, 0);
if (np->flags & NIU_FLAGS_VPD_VALID) {
From: Maciej W. Rozycki <[email protected]>
commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected] # v2.6.12+
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 6 ++---
drivers/video/console/vgacon.c | 44 ++++++++++++++++++++---------------------
include/linux/console_struct.h | 1
3 files changed, 26 insertions(+), 25 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -706,17 +706,17 @@ static int vt_resizex(struct vc_data *vc
if (vcp) {
int ret;
int save_scan_lines = vcp->vc_scan_lines;
- int save_font_height = vcp->vc_font.height;
+ int save_cell_height = vcp->vc_cell_height;
if (v.v_vlin)
vcp->vc_scan_lines = v.v_vlin;
if (v.v_clin)
- vcp->vc_font.height = v.v_clin;
+ vcp->vc_cell_height = v.v_clin;
vcp->vc_resize_user = 1;
ret = vc_resize(vcp, v.v_cols, v.v_rows);
if (ret) {
vcp->vc_scan_lines = save_scan_lines;
- vcp->vc_font.height = save_font_height;
+ vcp->vc_cell_height = save_cell_height;
console_unlock();
return ret;
}
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -383,7 +383,7 @@ static void vgacon_init(struct vc_data *
vc_resize(c, vga_video_num_columns, vga_video_num_lines);
c->vc_scan_lines = vga_scan_lines;
- c->vc_font.height = vga_video_font_height;
+ c->vc_font.height = c->vc_cell_height = vga_video_font_height;
c->vc_complement_mask = 0x7700;
if (vga_512_chars)
c->vc_hi_font_mask = 0x0800;
@@ -518,32 +518,32 @@ static void vgacon_cursor(struct vc_data
switch (CUR_SIZE(c->vc_cursor_type)) {
case CUR_UNDERLINE:
vgacon_set_cursor_size(c->state.x,
- c->vc_font.height -
- (c->vc_font.height <
+ c->vc_cell_height -
+ (c->vc_cell_height <
10 ? 2 : 3),
- c->vc_font.height -
- (c->vc_font.height <
+ c->vc_cell_height -
+ (c->vc_cell_height <
10 ? 1 : 2));
break;
case CUR_TWO_THIRDS:
vgacon_set_cursor_size(c->state.x,
- c->vc_font.height / 3,
- c->vc_font.height -
- (c->vc_font.height <
+ c->vc_cell_height / 3,
+ c->vc_cell_height -
+ (c->vc_cell_height <
10 ? 1 : 2));
break;
case CUR_LOWER_THIRD:
vgacon_set_cursor_size(c->state.x,
- (c->vc_font.height * 2) / 3,
- c->vc_font.height -
- (c->vc_font.height <
+ (c->vc_cell_height * 2) / 3,
+ c->vc_cell_height -
+ (c->vc_cell_height <
10 ? 1 : 2));
break;
case CUR_LOWER_HALF:
vgacon_set_cursor_size(c->state.x,
- c->vc_font.height / 2,
- c->vc_font.height -
- (c->vc_font.height <
+ c->vc_cell_height / 2,
+ c->vc_cell_height -
+ (c->vc_cell_height <
10 ? 1 : 2));
break;
case CUR_NONE:
@@ -554,7 +554,7 @@ static void vgacon_cursor(struct vc_data
break;
default:
vgacon_set_cursor_size(c->state.x, 1,
- c->vc_font.height);
+ c->vc_cell_height);
break;
}
break;
@@ -565,13 +565,13 @@ static int vgacon_doresize(struct vc_dat
unsigned int width, unsigned int height)
{
unsigned long flags;
- unsigned int scanlines = height * c->vc_font.height;
+ unsigned int scanlines = height * c->vc_cell_height;
u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
raw_spin_lock_irqsave(&vga_lock, flags);
vgacon_xres = width * VGA_FONTWIDTH;
- vgacon_yres = height * c->vc_font.height;
+ vgacon_yres = height * c->vc_cell_height;
if (vga_video_type >= VIDEO_TYPE_VGAC) {
outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
max_scan = inb_p(vga_video_port_val);
@@ -626,9 +626,9 @@ static int vgacon_doresize(struct vc_dat
static int vgacon_switch(struct vc_data *c)
{
int x = c->vc_cols * VGA_FONTWIDTH;
- int y = c->vc_rows * c->vc_font.height;
+ int y = c->vc_rows * c->vc_cell_height;
int rows = screen_info.orig_video_lines * vga_default_font_height/
- c->vc_font.height;
+ c->vc_cell_height;
/*
* We need to save screen size here as it's the only way
* we can spot the screen has been resized and we need to
@@ -1041,7 +1041,7 @@ static int vgacon_adjust_height(struct v
cursor_size_lastto = 0;
c->vc_sw->con_cursor(c, CM_DRAW);
}
- c->vc_font.height = fontheight;
+ c->vc_font.height = c->vc_cell_height = fontheight;
vc_resize(c, 0, rows); /* Adjust console size */
}
}
@@ -1096,12 +1096,12 @@ static int vgacon_resize(struct vc_data
*/
screen_info.orig_video_cols = width;
screen_info.orig_video_lines = height;
- vga_default_font_height = c->vc_font.height;
+ vga_default_font_height = c->vc_cell_height;
return 0;
}
if (width % 2 || width > screen_info.orig_video_cols ||
height > (screen_info.orig_video_lines * vga_default_font_height)/
- c->vc_font.height)
+ c->vc_cell_height)
return -EINVAL;
if (con_is_visible(c) && !vga_is_gfx) /* who knows */
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -101,6 +101,7 @@ struct vc_data {
unsigned int vc_rows;
unsigned int vc_size_row; /* Bytes per row */
unsigned int vc_scan_lines; /* # of scan lines */
+ unsigned int vc_cell_height; /* CRTC character cell height */
unsigned long vc_origin; /* [!] Start of real screen */
unsigned long vc_scr_end; /* [!] End of real screen */
unsigned long vc_visible_origin; /* [!] Top of visible window */
From: Maciej W. Rozycki <[email protected]>
commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream.
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: [email protected] # v2.6.24+
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/console/vgacon.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1089,12 +1089,20 @@ static int vgacon_resize(struct vc_data
if ((width << 1) * height > vga_vram_size)
return -EINVAL;
+ if (user) {
+ /*
+ * Ho ho! Someone (svgatextmode, eh?) may have reprogrammed
+ * the video mode! Set the new defaults then and go away.
+ */
+ screen_info.orig_video_cols = width;
+ screen_info.orig_video_lines = height;
+ vga_default_font_height = c->vc_font.height;
+ return 0;
+ }
if (width % 2 || width > screen_info.orig_video_cols ||
height > (screen_info.orig_video_lines * vga_default_font_height)/
c->vc_font.height)
- /* let svgatextmode tinker with video timings and
- return success */
- return (user) ? 0 : -EINVAL;
+ return -EINVAL;
if (con_is_visible(c) && !vga_is_gfx) /* who knows */
vgacon_doresize(c, width, height);
On Mon, May 24, 2021 at 05:25:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On Tiger Lake x86_64 kernel:
- tested ok.
Tested-by: Rudi Heitbaum <[email protected]>
--
Rudi
On Mon, 24 May 2021 17:25:17 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.12.7-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
On 5/24/21 9:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 5/24/21 8:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Mon, 24 May 2021 at 21:14, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.12.7-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.12.y
* git commit: 63b7a7baa77d39a089c1c64e5b046712ef598dc0
* git describe: v5.12.6-128-g63b7a7baa77d
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.12.y/build/v5.12.6-128-g63b7a7baa77d
## No regressions (compared to v5.12.5-44-gee71fa12d93b)
## No fixes (compared to v5.12.5-44-gee71fa12d93b)
## Test result summary
total: 80158, pass: 66564, fail: 1593, skip: 11381, xfail: 620,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 0 passed, 1 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsysca[
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Tue, May 25, 2021 at 02:00:54PM +0200, David Sterba wrote:
> On Mon, May 24, 2021 at 05:25:55PM +0200, Greg Kroah-Hartman wrote:
> > From: Johannes Thumshirn <[email protected]>
> >
> > commit 764c7c9a464b68f7c6a5a9ec0b923176a05e8e8f upstream.
> >
> > When multiple processes write data to the same block group on a
> > compressed zoned filesystem, the underlying device could report I/O
> > errors and data corruption is possible.
> >
> > This happens because on a zoned file system, compressed data writes
> > where sent to the device via a REQ_OP_WRITE instead of a
> > REQ_OP_ZONE_APPEND operation. But with REQ_OP_WRITE and parallel
> > submission it cannot be guaranteed that the data is always submitted
> > aligned to the underlying zone's write pointer.
> >
> > The change to using REQ_OP_ZONE_APPEND instead of REQ_OP_WRITE on a
> > zoned filesystem is non intrusive on a regular file system or when
> > submitting to a conventional zone on a zoned filesystem, as it is
> > guarded by btrfs_use_zone_append.
> >
> > Reported-by: David Sterba <[email protected]>
> > Fixes: 9d294a685fbc ("btrfs: zoned: enable to mount ZONED incompat flag")
> > CC: [email protected] # 5.12.x: e380adfc213a13: btrfs: zoned: pass start block to btrfs_use_zone_append
> > CC: [email protected] # 5.12.x
> > Signed-off-by: Johannes Thumshirn <[email protected]>
> > Signed-off-by: David Sterba <[email protected]>
> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
> We found a bug in this patch, please drop it from 5.12 queue.
This one, and the previous one, now dropped.
thanks,
greg k-h
On Mon, May 24, 2021 at 05:25:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.7-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted. Also had
several users test due to the i915 lockups fixed here, with positive
results.
Tested-by: Justin M. Forbes <[email protected]>
On Mon, May 24, 2021 at 05:25:55PM +0200, Greg Kroah-Hartman wrote:
> From: Johannes Thumshirn <[email protected]>
>
> commit 764c7c9a464b68f7c6a5a9ec0b923176a05e8e8f upstream.
>
> When multiple processes write data to the same block group on a
> compressed zoned filesystem, the underlying device could report I/O
> errors and data corruption is possible.
>
> This happens because on a zoned file system, compressed data writes
> where sent to the device via a REQ_OP_WRITE instead of a
> REQ_OP_ZONE_APPEND operation. But with REQ_OP_WRITE and parallel
> submission it cannot be guaranteed that the data is always submitted
> aligned to the underlying zone's write pointer.
>
> The change to using REQ_OP_ZONE_APPEND instead of REQ_OP_WRITE on a
> zoned filesystem is non intrusive on a regular file system or when
> submitting to a conventional zone on a zoned filesystem, as it is
> guarded by btrfs_use_zone_append.
>
> Reported-by: David Sterba <[email protected]>
> Fixes: 9d294a685fbc ("btrfs: zoned: enable to mount ZONED incompat flag")
> CC: [email protected] # 5.12.x: e380adfc213a13: btrfs: zoned: pass start block to btrfs_use_zone_append
> CC: [email protected] # 5.12.x
> Signed-off-by: Johannes Thumshirn <[email protected]>
> Signed-off-by: David Sterba <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
We found a bug in this patch, please drop it from 5.12 queue.
On Mon, May 24, 2021 at 05:25:54PM +0200, Greg Kroah-Hartman wrote:
> From: Johannes Thumshirn <[email protected]>
>
> commit e380adfc213a13677993c0e35cb48f5a8e61ebb0 upstream.
>
> btrfs_use_zone_append only needs the passed in extent_map's block_start
> member, so there's no need to pass in the full extent map.
>
> This also enables the use of btrfs_use_zone_append in places where we only
> have a start byte but no extent_map.
>
> Signed-off-by: Johannes Thumshirn <[email protected]>
> Reviewed-by: David Sterba <[email protected]>
> Signed-off-by: David Sterba <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
As this is a prerequisite for the other patch, please drop it from
stable queue as well, thanks.
On Mon, May 24, 2021 at 05:25:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.7 release.
> There are 127 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 151 pass: 151 fail: 0
Qemu test results:
total: 462 pass: 462 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter