BIT macro is not defined. Replace it with generic bit operations.
Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
Signed-off-by: Kyle Tso <[email protected]>
---
Changes since v1:
- re-word the commit message
include/dt-bindings/usb/pd.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
index fef3ef65967f..cb70b4ceedde 100644
--- a/include/dt-bindings/usb/pd.h
+++ b/include/dt-bindings/usb/pd.h
@@ -163,10 +163,10 @@
#define UFP_VDO_VER1_2 2
/* Device Capability */
-#define DEV_USB2_CAPABLE BIT(0)
-#define DEV_USB2_BILLBOARD BIT(1)
-#define DEV_USB3_CAPABLE BIT(2)
-#define DEV_USB4_CAPABLE BIT(3)
+#define DEV_USB2_CAPABLE (1 << 0)
+#define DEV_USB2_BILLBOARD (1 << 1)
+#define DEV_USB3_CAPABLE (1 << 2)
+#define DEV_USB4_CAPABLE (1 << 3)
/* Connector Type */
#define UFP_RECEPTACLE 2
@@ -191,9 +191,9 @@
/* Alternate Modes */
#define UFP_ALTMODE_NOT_SUPP 0
-#define UFP_ALTMODE_TBT3 BIT(0)
-#define UFP_ALTMODE_RECFG BIT(1)
-#define UFP_ALTMODE_NO_RECFG BIT(2)
+#define UFP_ALTMODE_TBT3 (1 << 0)
+#define UFP_ALTMODE_RECFG (1 << 1)
+#define UFP_ALTMODE_NO_RECFG (1 << 2)
/* USB Highest Speed */
#define UFP_USB2_ONLY 0
@@ -217,9 +217,9 @@
* <4:0> :: Port number
*/
#define DFP_VDO_VER1_1 1
-#define HOST_USB2_CAPABLE BIT(0)
-#define HOST_USB3_CAPABLE BIT(1)
-#define HOST_USB4_CAPABLE BIT(2)
+#define HOST_USB2_CAPABLE (1 << 0)
+#define HOST_USB3_CAPABLE (1 << 1)
+#define HOST_USB4_CAPABLE (1 << 2)
#define DFP_RECEPTACLE 2
#define DFP_CAPTIVE 3
--
2.31.1.818.g46aad6cb9e-goog
On Thu, May 27, 2021 at 7:41 AM Greg KH <[email protected]> wrote:
>
> On Thu, May 27, 2021 at 08:10:29PM +0800, Kyle Tso wrote:
> > BIT macro is not defined. Replace it with generic bit operations.
> >
> > Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
> > Signed-off-by: Kyle Tso <[email protected]>
> > ---
> > Changes since v1:
> > - re-word the commit message
> >
> > include/dt-bindings/usb/pd.h | 20 ++++++++++----------
> > 1 file changed, 10 insertions(+), 10 deletions(-)
> >
> > diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
> > index fef3ef65967f..cb70b4ceedde 100644
> > --- a/include/dt-bindings/usb/pd.h
> > +++ b/include/dt-bindings/usb/pd.h
> > @@ -163,10 +163,10 @@
> > #define UFP_VDO_VER1_2 2
> >
> > /* Device Capability */
> > -#define DEV_USB2_CAPABLE BIT(0)
> > -#define DEV_USB2_BILLBOARD BIT(1)
> > -#define DEV_USB3_CAPABLE BIT(2)
> > -#define DEV_USB4_CAPABLE BIT(3)
> > +#define DEV_USB2_CAPABLE (1 << 0)
> > +#define DEV_USB2_BILLBOARD (1 << 1)
> > +#define DEV_USB3_CAPABLE (1 << 2)
> > +#define DEV_USB4_CAPABLE (1 << 3)
>
> Why not just include the proper .h file instead?
Because the DT headers can't depend on kernel headers as they get used
separately.
Rob
On Thu, May 27, 2021 at 07:52:24AM -0500, Rob Herring wrote:
> On Thu, May 27, 2021 at 7:41 AM Greg KH <[email protected]> wrote:
> >
> > On Thu, May 27, 2021 at 08:10:29PM +0800, Kyle Tso wrote:
> > > BIT macro is not defined. Replace it with generic bit operations.
> > >
> > > Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
> > > Signed-off-by: Kyle Tso <[email protected]>
> > > ---
> > > Changes since v1:
> > > - re-word the commit message
> > >
> > > include/dt-bindings/usb/pd.h | 20 ++++++++++----------
> > > 1 file changed, 10 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
> > > index fef3ef65967f..cb70b4ceedde 100644
> > > --- a/include/dt-bindings/usb/pd.h
> > > +++ b/include/dt-bindings/usb/pd.h
> > > @@ -163,10 +163,10 @@
> > > #define UFP_VDO_VER1_2 2
> > >
> > > /* Device Capability */
> > > -#define DEV_USB2_CAPABLE BIT(0)
> > > -#define DEV_USB2_BILLBOARD BIT(1)
> > > -#define DEV_USB3_CAPABLE BIT(2)
> > > -#define DEV_USB4_CAPABLE BIT(3)
> > > +#define DEV_USB2_CAPABLE (1 << 0)
> > > +#define DEV_USB2_BILLBOARD (1 << 1)
> > > +#define DEV_USB3_CAPABLE (1 << 2)
> > > +#define DEV_USB4_CAPABLE (1 << 3)
> >
> > Why not just include the proper .h file instead?
>
> Because the DT headers can't depend on kernel headers as they get used
> separately.
Lame. :)
On Thu, May 27, 2021 at 08:10:29PM +0800, Kyle Tso wrote:
> BIT macro is not defined. Replace it with generic bit operations.
>
> Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
> Signed-off-by: Kyle Tso <[email protected]>
> ---
> Changes since v1:
> - re-word the commit message
>
> include/dt-bindings/usb/pd.h | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
> index fef3ef65967f..cb70b4ceedde 100644
> --- a/include/dt-bindings/usb/pd.h
> +++ b/include/dt-bindings/usb/pd.h
> @@ -163,10 +163,10 @@
> #define UFP_VDO_VER1_2 2
>
> /* Device Capability */
> -#define DEV_USB2_CAPABLE BIT(0)
> -#define DEV_USB2_BILLBOARD BIT(1)
> -#define DEV_USB3_CAPABLE BIT(2)
> -#define DEV_USB4_CAPABLE BIT(3)
> +#define DEV_USB2_CAPABLE (1 << 0)
> +#define DEV_USB2_BILLBOARD (1 << 1)
> +#define DEV_USB3_CAPABLE (1 << 2)
> +#define DEV_USB4_CAPABLE (1 << 3)
Why not just include the proper .h file instead?
On Thu, 27 May 2021 20:10:29 +0800, Kyle Tso wrote:
> BIT macro is not defined. Replace it with generic bit operations.
>
> Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
> Signed-off-by: Kyle Tso <[email protected]>
> ---
> Changes since v1:
> - re-word the commit message
>
> include/dt-bindings/usb/pd.h | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
Reviewed-by: Rob Herring <[email protected]>