The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
Fixes: c392df194a2d ("clk: stm32mp1: move RCC reset controller into RCC clock driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
---
drivers/clk/clk-stm32mp1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 6adc625e79c..256575bd29b 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -2263,6 +2263,7 @@ static int stm32_rcc_reset_init(struct device *dev, void __iomem *base,
if (!reset_data)
return -ENOMEM;
+ spin_lock_init(&reset_data->lock);
reset_data->membase = base;
reset_data->rcdev.owner = THIS_MODULE;
reset_data->rcdev.ops = &stm32_reset_ops;
--
2.17.1
Quoting Wang Hai (2021-06-29 18:58:23)
> The driver allocates the spinlock but not initialize it.
> Use spin_lock_init() on it to initialize it correctly.
>
> Fixes: c392df194a2d ("clk: stm32mp1: move RCC reset controller into RCC clock driver")
> Reported-by: Hulk Robot <[email protected]>
> Signed-off-by: Wang Hai <[email protected]>
> ---
Applied to clk-next