Add device tree bindings for the ADRF6780 Upconverter.
Signed-off-by: Antoniu Miclaus <[email protected]>
---
v3: remove `adi,parity-en` from example after latest changes in v2
.../bindings/iio/frequency/adi,adrf6780.yaml | 122 ++++++++++++++++++
1 file changed, 122 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
new file mode 100644
index 000000000000..b191d98bf778
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADRF6780 Microwave Upconverter
+
+maintainers:
+- Antoniu Miclaus <[email protected]>
+
+description: |
+ wideband, microwave upconverter optimized for point to point microwave
+ radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
+ https://www.analog.com/en/products/adrf6780.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adrf6780
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 1000000
+
+ clocks:
+ description:
+ Definition of the external clock (see clock/clock-bindings.txt)
+ minItems: 1
+
+ clock-names:
+ description:
+ Must be "lo_in"
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+ adi,vga-buff-en:
+ description:
+ VGA Buffer Enable.
+ type: boolean
+
+ adi,lo-buff-en:
+ description:
+ LO Buffer Enable.
+ type: boolean
+
+ adi,if-mode-en:
+ description:
+ IF Mode Enable.
+ type: boolean
+
+ adi,iq-mode-en:
+ description:
+ IQ Mode Enable.
+ type: boolean
+
+ adi,lo-x2-en:
+ description:
+ LO x2 Enable.
+ type: boolean
+
+ adi,lo-ppf-en:
+ description:
+ LO x1 Enable.
+ type: boolean
+
+ adi,lo-en:
+ description:
+ LO Enable.
+ type: boolean
+
+ adi,uc-bias-en:
+ description:
+ UC Bias Enable.
+ type: boolean
+
+ adi,lo-sideband:
+ description:
+ Switch to the Other LO Sideband.
+ type: boolean
+
+ adi,vdet-out-en:
+ description:
+ VDET Output Select Enable.
+ type: boolean
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#clock-cells':
+ const: 0
+
+required:
+- compatible
+- reg
+- clocks
+- clock-names
+
+additionalProperties: false
+
+examples:
+- |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adrf6780@0{
+ compatible = "adi,adrf6780";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ clocks = <&adrf6780_lo>;
+ clock-names = "lo_in";
+ };
+ };
+...
+
--
2.32.0
On Thu, Jul 01, 2021 at 05:16:48PM +0300, Antoniu Miclaus wrote:
> Add device tree bindings for the ADRF6780 Upconverter.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
> v3: remove `adi,parity-en` from example after latest changes in v2
> .../bindings/iio/frequency/adi,adrf6780.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
> new file mode 100644
> index 000000000000..b191d98bf778
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: GPL-2.0
Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADRF6780 Microwave Upconverter
> +
> +maintainers:
> +- Antoniu Miclaus <[email protected]>
> +
> +description: |
> + wideband, microwave upconverter optimized for point to point microwave
Wideband
> + radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
blank line
> + https://www.analog.com/en/products/adrf6780.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adrf6780
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 1000000
> +
> + clocks:
> + description:
> + Definition of the external clock (see clock/clock-bindings.txt)
Drop the reference.
> + minItems: 1
> +
> + clock-names:
> + description:
> + Must be "lo_in"
Looks like a constraint...
clock-names:
items:
- const: lo_in
> + maxItems: 1
> +
> + clock-output-names:
> + maxItems: 1
> +
> + adi,vga-buff-en:
> + description:
> + VGA Buffer Enable.
> + type: boolean
> +
> + adi,lo-buff-en:
> + description:
> + LO Buffer Enable.
> + type: boolean
> +
> + adi,if-mode-en:
> + description:
> + IF Mode Enable.
> + type: boolean
> +
> + adi,iq-mode-en:
> + description:
> + IQ Mode Enable.
> + type: boolean
> +
> + adi,lo-x2-en:
> + description:
> + LO x2 Enable.
> + type: boolean
> +
> + adi,lo-ppf-en:
> + description:
> + LO x1 Enable.
> + type: boolean
> +
> + adi,lo-en:
> + description:
> + LO Enable.
> + type: boolean
Do the other adi,lo-* properties depend on this one? If so, add
'dependencies' schema.
Any other property dependencies or mutual exclusion?
> +
> + adi,uc-bias-en:
> + description:
> + UC Bias Enable.
> + type: boolean
> +
> + adi,lo-sideband:
> + description:
> + Switch to the Other LO Sideband.
> + type: boolean
> +
> + adi,vdet-out-en:
> + description:
> + VDET Output Select Enable.
> + type: boolean
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
No child nodes, what are these for?
> +
> + '#clock-cells':
> + const: 0
> +
> +required:
> +- compatible
> +- reg
> +- clocks
> +- clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +- |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + adrf6780@0{
space ^
> + compatible = "adi,adrf6780";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + clocks = <&adrf6780_lo>;
> + clock-names = "lo_in";
> + };
> + };
> +...
> +
> --
> 2.32.0
>
>
On Thu, 01 Jul 2021 17:16:48 +0300, Antoniu Miclaus wrote:
> Add device tree bindings for the ADRF6780 Upconverter.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
> v3: remove `adi,parity-en` from example after latest changes in v2
> .../bindings/iio/frequency/adi,adrf6780.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:10:1: [warning] wrong indentation: expected 2 but found 0 (indentation)
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:101:1: [warning] wrong indentation: expected 2 but found 0 (indentation)
./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:109:1: [warning] wrong indentation: expected 2 but found 0 (indentation)
dtschema/dtc warnings/errors:
\ndoc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1499584
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.