This is the start of the stable review cycle for the 4.19.201 release.
There are 30 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 04 Aug 2021 13:43:24 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.201-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.201-rc1
Lukasz Cieplicki <[email protected]>
i40e: Add additional info to PHY type error
Arnaldo Carvalho de Melo <[email protected]>
Revert "perf map: Fix dso->nsinfo refcounting"
Srikar Dronamraju <[email protected]>
powerpc/pseries: Fix regression while building external modules
Dan Carpenter <[email protected]>
can: hi311x: fix a signedness bug in hi3110_cmd()
Wang Hai <[email protected]>
sis900: Fix missing pci_disable_device() in probe and remove
Wang Hai <[email protected]>
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
Marcelo Ricardo Leitner <[email protected]>
sctp: fix return value check in __sctp_rcv_asconf_lookup
Maor Gottlieb <[email protected]>
net/mlx5: Fix flow table chaining
Pavel Skripkin <[email protected]>
net: llc: fix skb_over_panic
Jiapeng Chong <[email protected]>
mlx4: Fix missing error code in mlx4_load_one()
Hoang Le <[email protected]>
tipc: fix sleeping in tipc accept routine
Jedrzej Jagielski <[email protected]>
i40e: Fix log TC creation failure when max num of queues is exceeded
Arkadiusz Kubalewski <[email protected]>
i40e: Fix logic of disabling queues
Pablo Neira Ayuso <[email protected]>
netfilter: nft_nat: allow to specify layer 4 protocol NAT only
Florian Westphal <[email protected]>
netfilter: conntrack: adjust stop timestamp to real expiry value
Nguyen Dinh Phi <[email protected]>
cfg80211: Fix possible memory leak in function cfg80211_bss_update
Krzysztof Kozlowski <[email protected]>
nfc: nfcsim: fix use after free during module unload
Paul Jakma <[email protected]>
NIU: fix incorrect error return, missed in previous revert
Pavel Skripkin <[email protected]>
can: esd_usb2: fix memory leak
Pavel Skripkin <[email protected]>
can: ems_usb: fix memory leak
Pavel Skripkin <[email protected]>
can: usb_8dev: fix memory leak
Pavel Skripkin <[email protected]>
can: mcba_usb_start(): add missing urb->transfer_dma initialization
Ziyang Xuan <[email protected]>
can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
Junxiao Bi <[email protected]>
ocfs2: issue zeroout to EOF blocks
Junxiao Bi <[email protected]>
ocfs2: fix zero out valid data
Juergen Gross <[email protected]>
x86/kvm: fix vcpu-id indexed array sizes
Desmond Cheong Zhi Xi <[email protected]>
btrfs: fix rw device counting in __btrfs_free_extra_devids
Jan Kiszka <[email protected]>
x86/asm: Ensure asm/proto.h can be included stand-alone
Eric Dumazet <[email protected]>
gro: ensure frag0 meets IP header alignment
Eric Dumazet <[email protected]>
virtio_net: Do not pull payload in skb->head
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/platforms/pseries/setup.c | 2 +-
arch/x86/include/asm/proto.h | 2 +
arch/x86/kvm/ioapic.c | 2 +-
arch/x86/kvm/ioapic.h | 4 +-
drivers/net/can/spi/hi311x.c | 2 +-
drivers/net/can/usb/ems_usb.c | 14 ++-
drivers/net/can/usb/esd_usb2.c | 16 +++-
drivers/net/can/usb/mcba_usb.c | 2 +
drivers/net/can/usb/usb_8dev.c | 15 +++-
drivers/net/ethernet/dec/tulip/winbond-840.c | 7 +-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 2 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 60 ++++++++-----
drivers/net/ethernet/mellanox/mlx4/main.c | 1 +
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 ++-
drivers/net/ethernet/sis/sis900.c | 7 +-
drivers/net/ethernet/sun/niu.c | 3 +-
drivers/net/virtio_net.c | 10 ++-
drivers/nfc/nfcsim.c | 3 +-
fs/btrfs/volumes.c | 1 +
fs/ocfs2/file.c | 103 +++++++++++++---------
include/linux/skbuff.h | 9 ++
include/linux/virtio_net.h | 14 +--
include/net/llc_pdu.h | 31 +++++--
net/can/raw.c | 20 ++++-
net/core/dev.c | 3 +-
net/llc/af_llc.c | 10 ++-
net/llc/llc_s_ac.c | 2 +-
net/netfilter/nf_conntrack_core.c | 7 +-
net/netfilter/nft_nat.c | 4 +-
net/sctp/input.c | 2 +-
net/tipc/socket.c | 9 +-
net/wireless/scan.c | 6 +-
tools/perf/util/map.c | 2 -
34 files changed, 260 insertions(+), 129 deletions(-)
From: Jedrzej Jagielski <[email protected]>
[ Upstream commit ea52faae1d17cd3048681d86d2e8641f44de484d ]
Fix missing failed message if driver does not have enough queues to
complete TC command. Without this fix no message is displayed in dmesg.
Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Jedrzej Jagielski <[email protected]>
Tested-by: Imam Hassan Reza Biswas <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a35445ea7064..246734be5177 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6762,6 +6762,8 @@ static int i40e_validate_mqprio_qopt(struct i40e_vsi *vsi,
}
if (vsi->num_queue_pairs <
(mqprio_qopt->qopt.offset[i] + mqprio_qopt->qopt.count[i])) {
+ dev_err(&vsi->back->pdev->dev,
+ "Failed to create traffic channel, insufficient number of queues.\n");
return -EINVAL;
}
if (sum_max_rate > i40e_get_link_speed(vsi)) {
--
2.30.2
From: Maor Gottlieb <[email protected]>
[ Upstream commit 8b54874ef1617185048029a3083d510569e93751 ]
Fix a bug when flow table is created in priority that already
has other flow tables as shown in the below diagram.
If the new flow table (FT-B) has the lowest level in the priority,
we need to connect the flow tables from the previous priority (p0)
to this new table. In addition when this flow table is destroyed
(FT-B), we need to connect the flow tables from the previous
priority (p0) to the next level flow table (FT-C) in the same
priority of the destroyed table (if exists).
---------
|root_ns|
---------
|
--------------------------------
| | |
---------- ---------- ---------
|p(prio)-x| | p-y | | p-n |
---------- ---------- ---------
| |
---------------- ------------------
|ns(e.g bypass)| |ns(e.g. kernel) |
---------------- ------------------
| | |
------- ------ ----
| p0 | | p1 | |p2|
------- ------ ----
| | \
-------- ------- ------
| FT-A | |FT-B | |FT-C|
-------- ------- ------
Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables")
Signed-off-by: Maor Gottlieb <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index a38a0c86705a..774f0a619a6d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -904,17 +904,19 @@ static int connect_fwd_rules(struct mlx5_core_dev *dev,
static int connect_flow_table(struct mlx5_core_dev *dev, struct mlx5_flow_table *ft,
struct fs_prio *prio)
{
- struct mlx5_flow_table *next_ft;
+ struct mlx5_flow_table *next_ft, *first_ft;
int err = 0;
/* Connect_prev_fts and update_root_ft_create are mutually exclusive */
- if (list_empty(&prio->node.children)) {
+ first_ft = list_first_entry_or_null(&prio->node.children,
+ struct mlx5_flow_table, node.list);
+ if (!first_ft || first_ft->level > ft->level) {
err = connect_prev_fts(dev, ft, prio);
if (err)
return err;
- next_ft = find_next_chained_ft(prio);
+ next_ft = first_ft ? first_ft : find_next_chained_ft(prio);
err = connect_fwd_rules(dev, ft, next_ft);
if (err)
return err;
@@ -1945,7 +1947,7 @@ static int disconnect_flow_table(struct mlx5_flow_table *ft)
node.list) == ft))
return 0;
- next_ft = find_next_chained_ft(prio);
+ next_ft = find_next_ft(ft);
err = connect_fwd_rules(dev, next_ft, ft);
if (err)
return err;
--
2.30.2
From: Hoang Le <[email protected]>
[ Upstream commit d237a7f11719ff9320721be5818352e48071aab6 ]
The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.
Fixes: 6398e23cdb1d8 ("tipc: standardize accept routine")
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/socket.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 3c41fb8edc5f..6aead6deaa6c 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -2440,7 +2440,7 @@ static int tipc_listen(struct socket *sock, int len)
static int tipc_wait_for_accept(struct socket *sock, long timeo)
{
struct sock *sk = sock->sk;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
int err;
/* True wake-one mechanism for incoming connections: only
@@ -2449,12 +2449,12 @@ static int tipc_wait_for_accept(struct socket *sock, long timeo)
* anymore, the common case will execute the loop only once.
*/
for (;;) {
- prepare_to_wait_exclusive(sk_sleep(sk), &wait,
- TASK_INTERRUPTIBLE);
if (timeo && skb_queue_empty(&sk->sk_receive_queue)) {
+ add_wait_queue(sk_sleep(sk), &wait);
release_sock(sk);
- timeo = schedule_timeout(timeo);
+ timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, timeo);
lock_sock(sk);
+ remove_wait_queue(sk_sleep(sk), &wait);
}
err = 0;
if (!skb_queue_empty(&sk->sk_receive_queue))
@@ -2466,7 +2466,6 @@ static int tipc_wait_for_accept(struct socket *sock, long timeo)
if (signal_pending(current))
break;
}
- finish_wait(sk_sleep(sk), &wait);
return err;
}
--
2.30.2
From: Jiapeng Chong <[email protected]>
[ Upstream commit 7e4960b3d66d7248b23de3251118147812b42da2 ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.
Eliminate the follow smatch warning:
drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn:
missing error code 'err'.
Reported-by: Abaci Robot <[email protected]>
Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs")
Signed-off-by: Jiapeng Chong <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index a0affcb090a0..d9707d47f1e7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -3515,6 +3515,7 @@ slave_start:
if (!SRIOV_VALID_STATE(dev->flags)) {
mlx4_err(dev, "Invalid SRIOV state\n");
+ err = -EINVAL;
goto err_close;
}
}
--
2.30.2
From: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit 557fb5862c9272ad9b21407afe1da8acfd9b53eb ]
As Ben Hutchings noticed, this check should have been inverted: the call
returns true in case of success.
Reported-by: Ben Hutchings <[email protected]>
Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Reviewed-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/input.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 203aaefd8d04..23c4f14bec25 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1132,7 +1132,7 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
if (unlikely(!af))
return NULL;
- if (af->from_addr_param(&paddr, param, peer_port, 0))
+ if (!af->from_addr_param(&paddr, param, peer_port, 0))
return NULL;
return __sctp_lookup_association(net, laddr, &paddr, transportp);
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ]
The hi3110_cmd() is supposed to return zero on success and negative
error codes on failure, but it was accidentally declared as a u8 when
it needs to be an int type.
Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/r/20210729141246.GA1267@kili
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/hi311x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index ddaf46239e39..472175e37055 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -236,7 +236,7 @@ static int hi3110_spi_trans(struct spi_device *spi, int len)
return ret;
}
-static u8 hi3110_cmd(struct spi_device *spi, u8 command)
+static int hi3110_cmd(struct spi_device *spi, u8 command)
{
struct hi3110_priv *priv = spi_get_drvdata(spi);
--
2.30.2
From: Pavel Skripkin <[email protected]>
commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream.
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see usb_8dev_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/usb_8dev.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -148,7 +148,8 @@ struct usb_8dev_priv {
u8 *cmd_msg_buffer;
struct mutex usb_8dev_cmd_lock;
-
+ void *rxbuf[MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[MAX_RX_URBS];
};
/* tx frame */
@@ -744,6 +745,7 @@ static int usb_8dev_start(struct usb_8de
for (i = 0; i < MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf;
+ dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -753,7 +755,7 @@ static int usb_8dev_start(struct usb_8de
}
buf = usb_alloc_coherent(priv->udev, RX_BUFFER_SIZE, GFP_KERNEL,
- &urb->transfer_dma);
+ &buf_dma);
if (!buf) {
netdev_err(netdev, "No memory left for USB buffer\n");
usb_free_urb(urb);
@@ -761,6 +763,8 @@ static int usb_8dev_start(struct usb_8de
break;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, priv->udev,
usb_rcvbulkpipe(priv->udev,
USB_8DEV_ENDP_DATA_RX),
@@ -778,6 +782,9 @@ static int usb_8dev_start(struct usb_8de
break;
}
+ priv->rxbuf[i] = buf;
+ priv->rxbuf_dma[i] = buf_dma;
+
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
}
@@ -847,6 +854,10 @@ static void unlink_all_urbs(struct usb_8
usb_kill_anchored_urbs(&priv->rx_submitted);
+ for (i = 0; i < MAX_RX_URBS; ++i)
+ usb_free_coherent(priv->udev, RX_BUFFER_SIZE,
+ priv->rxbuf[i], priv->rxbuf_dma[i]);
+
usb_kill_anchored_urbs(&priv->tx_submitted);
atomic_set(&priv->active_tx_urbs, 0);
From: Wang Hai <[email protected]>
[ Upstream commit 89fb62fde3b226f99b7015280cf132e2a7438edf ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sis/sis900.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 823873030a21..e1bd9eacee17 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -441,7 +441,7 @@ static int sis900_probe(struct pci_dev *pci_dev,
#endif
/* setup various bits in PCI command register */
- ret = pci_enable_device(pci_dev);
+ ret = pcim_enable_device(pci_dev);
if(ret) return ret;
i = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
@@ -467,7 +467,7 @@ static int sis900_probe(struct pci_dev *pci_dev,
ioaddr = pci_iomap(pci_dev, 0, 0);
if (!ioaddr) {
ret = -ENOMEM;
- goto err_out_cleardev;
+ goto err_out;
}
sis_priv = netdev_priv(net_dev);
@@ -575,8 +575,6 @@ err_unmap_tx:
sis_priv->tx_ring_dma);
err_out_unmap:
pci_iounmap(pci_dev, ioaddr);
-err_out_cleardev:
- pci_release_regions(pci_dev);
err_out:
free_netdev(net_dev);
return ret;
@@ -2421,7 +2419,6 @@ static void sis900_remove(struct pci_dev *pci_dev)
sis_priv->tx_ring_dma);
pci_iounmap(pci_dev, sis_priv->ioaddr);
free_netdev(net_dev);
- pci_release_regions(pci_dev);
}
#ifdef CONFIG_PM
--
2.30.2
From: Srikar Dronamraju <[email protected]>
commit 333cf507465fbebb3727f5b53e77538467df312a upstream.
With commit c9f3401313a5 ("powerpc: Always enable queued spinlocks for
64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always
enabled on ppc64le, external modules that use spinlock APIs are
failing.
ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor'
Before the above commit, modules were able to build without any
issues. Also this problem is not seen on other architectures. This
problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in
the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by
default and only enabled in certain conditions like
CONFIG_DEBUG_SPINLOCKS is set in the kernel config.
#include <linux/module.h>
spinlock_t spLock;
static int __init spinlock_test_init(void)
{
spin_lock_init(&spLock);
spin_lock(&spLock);
spin_unlock(&spLock);
return 0;
}
static void __exit spinlock_test_exit(void)
{
printk("spinlock_test unloaded\n");
}
module_init(spinlock_test_init);
module_exit(spinlock_test_exit);
MODULE_DESCRIPTION ("spinlock_test");
MODULE_LICENSE ("non-GPL");
MODULE_AUTHOR ("Srikar Dronamraju");
Given that spin locks are one of the basic facilities for module code,
this effectively makes it impossible to build/load almost any non GPL
modules on ppc64le.
This was first reported at https://github.com/openzfs/zfs/issues/11172
Currently shared_processor is exported as GPL only symbol.
Fix this for parity with other architectures by exposing
shared_processor to non-GPL modules too.
Fixes: 14c73bd344da ("powerpc/vcpu: Assume dedicated processors as non-preempt")
Cc: [email protected] # v5.5+
Reported-by: [email protected]
Signed-off-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/pseries/setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,7 +76,7 @@
#include "../../../../drivers/pci/pci.h"
DEFINE_STATIC_KEY_FALSE(shared_processor);
-EXPORT_SYMBOL_GPL(shared_processor);
+EXPORT_SYMBOL(shared_processor);
int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
From: Lukasz Cieplicki <[email protected]>
commit dc614c46178b0b89bde86ac54fc687a28580d2b7 upstream.
In case of PHY type error occurs, the message was too generic.
Add additional info to PHY type error indicating that it can be
wrong cable connected.
Fixes: 124ed15bf126 ("i40e: Add dual speed module support")
Signed-off-by: Lukasz Cieplicki <[email protected]>
Signed-off-by: Michal Maloszewski <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -674,7 +674,7 @@ static void i40e_get_settings_link_up(st
default:
/* if we got here and link is up something bad is afoot */
netdev_info(netdev,
- "WARNING: Link is up but PHY type 0x%x is not recognized.\n",
+ "WARNING: Link is up but PHY type 0x%x is not recognized, or incorrect cable is in use\n",
hw_link_info->phy_type);
}
From: Arnaldo Carvalho de Melo <[email protected]>
commit 9bac1bd6e6d36459087a728a968e79e37ebcea1a upstream.
This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.
This reverts commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5.
Cc: Riccardo Mancini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/map.c | 2 --
1 file changed, 2 deletions(-)
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -209,8 +209,6 @@ struct map *map__new(struct machine *mac
if (!(prot & PROT_EXEC))
dso__set_loaded(dso);
}
-
- nsinfo__put(dso->nsinfo);
dso->nsinfo = nsi;
dso__put(dso);
}
From: Junxiao Bi <[email protected]>
commit f267aeb6dea5e468793e5b8eb6a9c72c0020d418 upstream.
If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6bba4471f0cc ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1943,7 +1943,6 @@ static int __ocfs2_change_file_space(str
goto out_inode_unlock;
}
- orig_isize = i_size_read(inode);
switch (sr->l_whence) {
case 0: /*SEEK_SET*/
break;
@@ -1951,7 +1950,7 @@ static int __ocfs2_change_file_space(str
sr->l_start += f_pos;
break;
case 2: /*SEEK_END*/
- sr->l_start += orig_isize;
+ sr->l_start += i_size_read(inode);
break;
default:
ret = -EINVAL;
@@ -2006,6 +2005,7 @@ static int __ocfs2_change_file_space(str
ret = -EINVAL;
}
+ orig_isize = i_size_read(inode);
/* zeroout eof blocks in the cluster. */
if (!ret && change_size && orig_isize < size) {
ret = ocfs2_zeroout_partial_cluster(inode, orig_isize,
From: Nguyen Dinh Phi <[email protected]>
commit f9a5c358c8d26fed0cc45f2afc64633d4ba21dff upstream.
When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: Nguyen Dinh Phi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/scan.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1029,16 +1029,14 @@ cfg80211_bss_update(struct cfg80211_regi
* be grouped with this beacon for updates ...
*/
if (!cfg80211_combine_bsses(rdev, new)) {
- kfree(new);
+ bss_ref_put(rdev, new);
goto drop;
}
}
if (rdev->bss_entries >= bss_entries_limit &&
!cfg80211_bss_expire_oldest(rdev)) {
- if (!list_empty(&new->hidden_list))
- list_del(&new->hidden_list);
- kfree(new);
+ bss_ref_put(rdev, new);
goto drop;
}
From: Junxiao Bi <[email protected]>
commit 9449ad33be8480f538b11a593e2dda2fb33ca06d upstream.
For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster. But since ->writepage will ignore EOF
pages, those zeros will not be flushed.
This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't. The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.
When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again. That made
writeback ignore them forever. That will cause data corruption. Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.
To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more. The fix is to avoid zero EOF blocks with buffer
write.
The following code snippet from qemu-img could trigger the corruption.
656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
...
660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
660 fallocate(11, 0, 2275868672, 327680) = 0
658 pwrite64(11, "
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Junxiao Bi <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/file.c | 99 +++++++++++++++++++++++++++++++++-----------------------
1 file changed, 60 insertions(+), 39 deletions(-)
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1537,6 +1537,45 @@ static void ocfs2_truncate_cluster_pages
}
}
+/*
+ * zero out partial blocks of one cluster.
+ *
+ * start: file offset where zero starts, will be made upper block aligned.
+ * len: it will be trimmed to the end of current cluster if "start + len"
+ * is bigger than it.
+ */
+static int ocfs2_zeroout_partial_cluster(struct inode *inode,
+ u64 start, u64 len)
+{
+ int ret;
+ u64 start_block, end_block, nr_blocks;
+ u64 p_block, offset;
+ u32 cluster, p_cluster, nr_clusters;
+ struct super_block *sb = inode->i_sb;
+ u64 end = ocfs2_align_bytes_to_clusters(sb, start);
+
+ if (start + len < end)
+ end = start + len;
+
+ start_block = ocfs2_blocks_for_bytes(sb, start);
+ end_block = ocfs2_blocks_for_bytes(sb, end);
+ nr_blocks = end_block - start_block;
+ if (!nr_blocks)
+ return 0;
+
+ cluster = ocfs2_bytes_to_clusters(sb, start);
+ ret = ocfs2_get_clusters(inode, cluster, &p_cluster,
+ &nr_clusters, NULL);
+ if (ret)
+ return ret;
+ if (!p_cluster)
+ return 0;
+
+ offset = start_block - ocfs2_clusters_to_blocks(sb, cluster);
+ p_block = ocfs2_clusters_to_blocks(sb, p_cluster) + offset;
+ return sb_issue_zeroout(sb, p_block, nr_blocks, GFP_NOFS);
+}
+
static int ocfs2_zero_partial_clusters(struct inode *inode,
u64 start, u64 len)
{
@@ -1546,6 +1585,7 @@ static int ocfs2_zero_partial_clusters(s
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
unsigned int csize = osb->s_clustersize;
handle_t *handle;
+ loff_t isize = i_size_read(inode);
/*
* The "start" and "end" values are NOT necessarily part of
@@ -1566,6 +1606,26 @@ static int ocfs2_zero_partial_clusters(s
if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
goto out;
+ /* No page cache for EOF blocks, issue zero out to disk. */
+ if (end > isize) {
+ /*
+ * zeroout eof blocks in last cluster starting from
+ * "isize" even "start" > "isize" because it is
+ * complicated to zeroout just at "start" as "start"
+ * may be not aligned with block size, buffer write
+ * would be required to do that, but out of eof buffer
+ * write is not supported.
+ */
+ ret = ocfs2_zeroout_partial_cluster(inode, isize,
+ end - isize);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ if (start >= isize)
+ goto out;
+ end = isize;
+ }
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
@@ -1864,45 +1924,6 @@ out:
}
/*
- * zero out partial blocks of one cluster.
- *
- * start: file offset where zero starts, will be made upper block aligned.
- * len: it will be trimmed to the end of current cluster if "start + len"
- * is bigger than it.
- */
-static int ocfs2_zeroout_partial_cluster(struct inode *inode,
- u64 start, u64 len)
-{
- int ret;
- u64 start_block, end_block, nr_blocks;
- u64 p_block, offset;
- u32 cluster, p_cluster, nr_clusters;
- struct super_block *sb = inode->i_sb;
- u64 end = ocfs2_align_bytes_to_clusters(sb, start);
-
- if (start + len < end)
- end = start + len;
-
- start_block = ocfs2_blocks_for_bytes(sb, start);
- end_block = ocfs2_blocks_for_bytes(sb, end);
- nr_blocks = end_block - start_block;
- if (!nr_blocks)
- return 0;
-
- cluster = ocfs2_bytes_to_clusters(sb, start);
- ret = ocfs2_get_clusters(inode, cluster, &p_cluster,
- &nr_clusters, NULL);
- if (ret)
- return ret;
- if (!p_cluster)
- return 0;
-
- offset = start_block - ocfs2_clusters_to_blocks(sb, cluster);
- p_block = ocfs2_clusters_to_blocks(sb, p_cluster) + offset;
- return sb_issue_zeroout(sb, p_block, nr_blocks, GFP_NOFS);
-}
-
-/*
* Parts of this function taken from xfs_change_file_space()
*/
static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
From: Jan Kiszka <[email protected]>
[ Upstream commit f7b21a0e41171d22296b897dac6e4c41d2a3643c ]
Fix:
../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \
inside parameter list will not be visible outside of this definition or declaration
long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2);
^~~~~~~~~~~
.../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \
inside parameter list will not be visible outside of this definition or declaration
long do_arch_prctl_common(struct task_struct *task, int option,
^~~~~~~~~~~
if linux/sched.h hasn't be included previously. This fixes a build error
when this header is used outside of the kernel tree.
[ bp: Massage commit message. ]
Signed-off-by: Jan Kiszka <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/proto.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 6e81788a30c1..0eaca7a130c9 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -4,6 +4,8 @@
#include <asm/ldt.h>
+struct task_struct;
+
/* misc architecture specific prototypes */
void syscall_init(void);
--
2.30.2
From: Juergen Gross <[email protected]>
commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3 upstream.
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.
Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.
Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.
Signed-off-by: Juergen Gross <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/ioapic.c | 2 +-
arch/x86/kvm/ioapic.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -96,7 +96,7 @@ static unsigned long ioapic_read_indirec
static void rtc_irq_eoi_tracking_reset(struct kvm_ioapic *ioapic)
{
ioapic->rtc_status.pending_eoi = 0;
- bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID);
+ bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID + 1);
}
static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic);
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -43,13 +43,13 @@ struct kvm_vcpu;
struct dest_map {
/* vcpu bitmap where IRQ has been sent */
- DECLARE_BITMAP(map, KVM_MAX_VCPU_ID);
+ DECLARE_BITMAP(map, KVM_MAX_VCPU_ID + 1);
/*
* Vector sent to a given vcpu, only valid when
* the vcpu's bit in map is set
*/
- u8 vectors[KVM_MAX_VCPU_ID];
+ u8 vectors[KVM_MAX_VCPU_ID + 1];
};
From: Desmond Cheong Zhi Xi <[email protected]>
commit b2a616676839e2a6b02c8e40be7f886f882ed194 upstream.
When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.
This error was caught by Syzbot which reported a warning in
close_fs_devices:
WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
Modules linked in:
CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
FS: 00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
btrfs_fill_super fs/btrfs/super.c:1382 [inline]
btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
fc_mount fs/namespace.c:993 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:
btrfs_mount_root():
btrfs_scan_one_device():
device_list_add(); <---------------- device added
btrfs_open_devices():
open_fs_devices():
btrfs_open_one_device(); <-------- writable device opened,
rw device count ++
btrfs_fill_super():
open_ctree():
btrfs_free_extra_devids():
__btrfs_free_extra_devids(); <--- writable device removed,
rw device count not decremented
fail_tree_roots:
btrfs_close_devices():
close_fs_devices(); <------- rw device count off by 1
As a note, prior to commit cf89af146b7e ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.
In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.
Additionally, following commit 82372bc816d7 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.
Reported-by: [email protected]
Fixes: cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: [email protected] # 5.10+
Tested-by: [email protected]
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -995,6 +995,7 @@ again:
if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state)) {
list_del_init(&device->dev_alloc_list);
clear_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state);
+ fs_devices->rw_devices--;
}
list_del_init(&device->dev_list);
fs_devices->num_devices--;
From: Arkadiusz Kubalewski <[email protected]>
[ Upstream commit 65662a8dcdd01342b71ee44234bcfd0162e195af ]
Correct the message flow between driver and firmware when disabling
queues.
Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <[email protected]>
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 58 ++++++++++++---------
1 file changed, 34 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 1b101b526ed3..a35445ea7064 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4310,11 +4310,10 @@ int i40e_control_wait_tx_q(int seid, struct i40e_pf *pf, int pf_q,
}
/**
- * i40e_vsi_control_tx - Start or stop a VSI's rings
+ * i40e_vsi_enable_tx - Start a VSI's rings
* @vsi: the VSI being configured
- * @enable: start or stop the rings
**/
-static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
+static int i40e_vsi_enable_tx(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
int i, pf_q, ret = 0;
@@ -4323,7 +4322,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
ret = i40e_control_wait_tx_q(vsi->seid, pf,
pf_q,
- false /*is xdp*/, enable);
+ false /*is xdp*/, true);
if (ret)
break;
@@ -4332,7 +4331,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
ret = i40e_control_wait_tx_q(vsi->seid, pf,
pf_q + vsi->alloc_queue_pairs,
- true /*is xdp*/, enable);
+ true /*is xdp*/, true);
if (ret)
break;
}
@@ -4430,32 +4429,25 @@ int i40e_control_wait_rx_q(struct i40e_pf *pf, int pf_q, bool enable)
}
/**
- * i40e_vsi_control_rx - Start or stop a VSI's rings
+ * i40e_vsi_enable_rx - Start a VSI's rings
* @vsi: the VSI being configured
- * @enable: start or stop the rings
**/
-static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
+static int i40e_vsi_enable_rx(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
int i, pf_q, ret = 0;
pf_q = vsi->base_queue;
for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
- ret = i40e_control_wait_rx_q(pf, pf_q, enable);
+ ret = i40e_control_wait_rx_q(pf, pf_q, true);
if (ret) {
dev_info(&pf->pdev->dev,
- "VSI seid %d Rx ring %d %sable timeout\n",
- vsi->seid, pf_q, (enable ? "en" : "dis"));
+ "VSI seid %d Rx ring %d enable timeout\n",
+ vsi->seid, pf_q);
break;
}
}
- /* Due to HW errata, on Rx disable only, the register can indicate done
- * before it really is. Needs 50ms to be sure
- */
- if (!enable)
- mdelay(50);
-
return ret;
}
@@ -4468,29 +4460,47 @@ int i40e_vsi_start_rings(struct i40e_vsi *vsi)
int ret = 0;
/* do rx first for enable and last for disable */
- ret = i40e_vsi_control_rx(vsi, true);
+ ret = i40e_vsi_enable_rx(vsi);
if (ret)
return ret;
- ret = i40e_vsi_control_tx(vsi, true);
+ ret = i40e_vsi_enable_tx(vsi);
return ret;
}
+#define I40E_DISABLE_TX_GAP_MSEC 50
+
/**
* i40e_vsi_stop_rings - Stop a VSI's rings
* @vsi: the VSI being configured
**/
void i40e_vsi_stop_rings(struct i40e_vsi *vsi)
{
+ struct i40e_pf *pf = vsi->back;
+ int pf_q, err, q_end;
+
/* When port TX is suspended, don't wait */
if (test_bit(__I40E_PORT_SUSPENDED, vsi->back->state))
return i40e_vsi_stop_rings_no_wait(vsi);
- /* do rx first for enable and last for disable
- * Ignore return value, we need to shutdown whatever we can
- */
- i40e_vsi_control_tx(vsi, false);
- i40e_vsi_control_rx(vsi, false);
+ q_end = vsi->base_queue + vsi->num_queue_pairs;
+ for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++)
+ i40e_pre_tx_queue_cfg(&pf->hw, (u32)pf_q, false);
+
+ for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) {
+ err = i40e_control_wait_rx_q(pf, pf_q, false);
+ if (err)
+ dev_info(&pf->pdev->dev,
+ "VSI seid %d Rx ring %d dissable timeout\n",
+ vsi->seid, pf_q);
+ }
+
+ msleep(I40E_DISABLE_TX_GAP_MSEC);
+ pf_q = vsi->base_queue;
+ for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++)
+ wr32(&pf->hw, I40E_QTX_ENA(pf_q), 0);
+
+ i40e_vsi_wait_queues_disabled(vsi);
}
/**
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit c7c9d2102c9c098916ab9e0ab248006107d00d6c ]
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.
Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:
1. skb allocation with size = len + header size
len is passed from userpace and header size
is 3 since addr->sllc_xid is set.
2. skb_reserve() for header_len = 3
3. filling all other space with memcpy_from_msg()
Ok, at this moment we have fully loaded skb, only headers needs to be
filled.
Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:
1. Bytes rigth after LLC header are user data, so this function
was overwriting payload.
2. skb_push(skb, 3) call can cause skb_over_panic() since
all free space was filled in llc_ui_sendmsg(). (This can
happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
header) = 703. SKB_DATA_ALIGN(703) = 704)
So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().
This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/llc_pdu.h | 31 +++++++++++++++++++++++--------
net/llc/af_llc.c | 10 +++++++++-
net/llc/llc_s_ac.c | 2 +-
3 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index c0f0a13ed818..49aa79c7b278 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -15,9 +15,11 @@
#include <linux/if_ether.h>
/* Lengths of frame formats */
-#define LLC_PDU_LEN_I 4 /* header and 2 control bytes */
-#define LLC_PDU_LEN_S 4
-#define LLC_PDU_LEN_U 3 /* header and 1 control byte */
+#define LLC_PDU_LEN_I 4 /* header and 2 control bytes */
+#define LLC_PDU_LEN_S 4
+#define LLC_PDU_LEN_U 3 /* header and 1 control byte */
+/* header and 1 control byte and XID info */
+#define LLC_PDU_LEN_U_XID (LLC_PDU_LEN_U + sizeof(struct llc_xid_info))
/* Known SAP addresses */
#define LLC_GLOBAL_SAP 0xFF
#define LLC_NULL_SAP 0x00 /* not network-layer visible */
@@ -50,9 +52,10 @@
#define LLC_PDU_TYPE_U_MASK 0x03 /* 8-bit control field */
#define LLC_PDU_TYPE_MASK 0x03
-#define LLC_PDU_TYPE_I 0 /* first bit */
-#define LLC_PDU_TYPE_S 1 /* first two bits */
-#define LLC_PDU_TYPE_U 3 /* first two bits */
+#define LLC_PDU_TYPE_I 0 /* first bit */
+#define LLC_PDU_TYPE_S 1 /* first two bits */
+#define LLC_PDU_TYPE_U 3 /* first two bits */
+#define LLC_PDU_TYPE_U_XID 4 /* private type for detecting XID commands */
#define LLC_PDU_TYPE_IS_I(pdu) \
((!(pdu->ctrl_1 & LLC_PDU_TYPE_I_MASK)) ? 1 : 0)
@@ -230,9 +233,18 @@ static inline struct llc_pdu_un *llc_pdu_un_hdr(struct sk_buff *skb)
static inline void llc_pdu_header_init(struct sk_buff *skb, u8 type,
u8 ssap, u8 dsap, u8 cr)
{
- const int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+ int hlen = 4; /* default value for I and S types */
struct llc_pdu_un *pdu;
+ switch (type) {
+ case LLC_PDU_TYPE_U:
+ hlen = 3;
+ break;
+ case LLC_PDU_TYPE_U_XID:
+ hlen = 6;
+ break;
+ }
+
skb_push(skb, hlen);
skb_reset_network_header(skb);
pdu = llc_pdu_un_hdr(skb);
@@ -374,7 +386,10 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1; /* size of receive window */
- skb_put(skb, sizeof(struct llc_xid_info));
+
+ /* no need to push/put since llc_pdu_header_init() has already
+ * pushed 3 + 3 bytes
+ */
}
/**
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index bcba579e292f..89a3dc7d5d40 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -98,8 +98,16 @@ static inline u8 llc_ui_header_len(struct sock *sk, struct sockaddr_llc *addr)
{
u8 rc = LLC_PDU_LEN_U;
- if (addr->sllc_test || addr->sllc_xid)
+ if (addr->sllc_test)
rc = LLC_PDU_LEN_U;
+ else if (addr->sllc_xid)
+ /* We need to expand header to sizeof(struct llc_xid_info)
+ * since llc_pdu_init_as_xid_cmd() sets 4,5,6 bytes of LLC header
+ * as XID PDU. In llc_ui_sendmsg() we reserved header size and then
+ * filled all other space with user data. If we won't reserve this
+ * bytes, llc_pdu_init_as_xid_cmd() will overwrite user data
+ */
+ rc = LLC_PDU_LEN_U_XID;
else if (sk->sk_type == SOCK_STREAM)
rc = LLC_PDU_LEN_I;
return rc;
diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c
index 7ae4cc684d3a..9fa3342c7a82 100644
--- a/net/llc/llc_s_ac.c
+++ b/net/llc/llc_s_ac.c
@@ -79,7 +79,7 @@ int llc_sap_action_send_xid_c(struct llc_sap *sap, struct sk_buff *skb)
struct llc_sap_state_ev *ev = llc_sap_ev(skb);
int rc;
- llc_pdu_header_init(skb, LLC_PDU_TYPE_U, ev->saddr.lsap,
+ llc_pdu_header_init(skb, LLC_PDU_TYPE_U_XID, ev->saddr.lsap,
ev->daddr.lsap, LLC_PDU_CMD);
llc_pdu_init_as_xid_cmd(skb, LLC_XID_NULL_CLASS_2, 0);
rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
--
2.30.2
From: Pavel Skripkin <[email protected]>
commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream.
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
with coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/esd_usb2.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -207,6 +207,8 @@ struct esd_usb2 {
int net_count;
u32 version;
int rxinitdone;
+ void *rxbuf[MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[MAX_RX_URBS];
};
struct esd_usb2_net_priv {
@@ -556,6 +558,7 @@ static int esd_usb2_setup_rx_urbs(struct
for (i = 0; i < MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf = NULL;
+ dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -565,7 +568,7 @@ static int esd_usb2_setup_rx_urbs(struct
}
buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
- &urb->transfer_dma);
+ &buf_dma);
if (!buf) {
dev_warn(dev->udev->dev.parent,
"No memory left for USB buffer\n");
@@ -573,6 +576,8 @@ static int esd_usb2_setup_rx_urbs(struct
goto freeurb;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, dev->udev,
usb_rcvbulkpipe(dev->udev, 1),
buf, RX_BUFFER_SIZE,
@@ -585,8 +590,12 @@ static int esd_usb2_setup_rx_urbs(struct
usb_unanchor_urb(urb);
usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
urb->transfer_dma);
+ goto freeurb;
}
+ dev->rxbuf[i] = buf;
+ dev->rxbuf_dma[i] = buf_dma;
+
freeurb:
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
@@ -674,6 +683,11 @@ static void unlink_all_urbs(struct esd_u
int i, j;
usb_kill_anchored_urbs(&dev->rx_submitted);
+
+ for (i = 0; i < MAX_RX_URBS; ++i)
+ usb_free_coherent(dev->udev, RX_BUFFER_SIZE,
+ dev->rxbuf[i], dev->rxbuf_dma[i]);
+
for (i = 0; i < dev->net_count; i++) {
priv = dev->nets[i];
if (priv) {
From: Paul Jakma <[email protected]>
commit 15bbf8bb4d4ab87108ecf5f4155ec8ffa3c141d6 upstream.
Commit 7930742d6, reverting 26fd962, missed out on reverting an incorrect
change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.
Fix, so my Neptune card works again.
Cc: Kangjie Lu <[email protected]>
Cc: Shannon Nelson <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: stable <[email protected]>
Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sun/niu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8192,8 +8192,9 @@ static int niu_pci_vpd_fetch(struct niu
err = niu_pci_vpd_scan_props(np, here, end);
if (err < 0)
return err;
+ /* ret == 1 is not an error */
if (err == 1)
- return -EINVAL;
+ return 0;
}
return 0;
}
From: Wang Hai <[email protected]>
[ Upstream commit 76a16be07b209a3f507c72abe823bd3af1c8661a ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/dec/tulip/winbond-840.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 70cb2d689c2c..79bdd2a79dbd 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -367,7 +367,7 @@ static int w840_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
void __iomem *ioaddr;
- i = pci_enable_device(pdev);
+ i = pcim_enable_device(pdev);
if (i) return i;
pci_set_master(pdev);
@@ -389,7 +389,7 @@ static int w840_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
if (!ioaddr)
- goto err_out_free_res;
+ goto err_out_netdev;
for (i = 0; i < 3; i++)
((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i));
@@ -468,8 +468,6 @@ static int w840_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
err_out_cleardev:
pci_iounmap(pdev, ioaddr);
-err_out_free_res:
- pci_release_regions(pdev);
err_out_netdev:
free_netdev (dev);
return -ENODEV;
@@ -1535,7 +1533,6 @@ static void w840_remove1(struct pci_dev *pdev)
if (dev) {
struct netdev_private *np = netdev_priv(dev);
unregister_netdev(dev);
- pci_release_regions(pdev);
pci_iounmap(pdev, np->base_addr);
free_netdev(dev);
}
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
commit 5e7b30d24a5b8cb691c173b45b50e3ca0191be19 upstream.
There is a use after free memory corruption during module exit:
- nfcsim_exit()
- nfcsim_device_free(dev0)
- nfc_digital_unregister_device()
This iterates over command queue and frees all commands,
- dev->up = false
- nfcsim_link_shutdown()
- nfcsim_link_recv_wake()
This wakes the sleeping thread nfcsim_link_recv_skb().
- nfcsim_link_recv_skb()
Wake from wait_event_interruptible_timeout(),
call directly the deb->cb callback even though (dev->up == false),
- digital_send_cmd_complete()
Dereference of "struct digital_cmd" cmd which was freed earlier by
nfc_digital_unregister_device().
This causes memory corruption shortly after (with unrelated stack
trace):
nfc nfc0: NFC: nfcsim_recv_wq: Device is down
llcp: nfc_llcp_recv: err -19
nfc nfc1: NFC: nfcsim_recv_wq: Device is down
BUG: unable to handle page fault for address: ffffffffffffffed
Call Trace:
fsnotify+0x54b/0x5c0
__fsnotify_parent+0x1fe/0x300
? vfs_write+0x27c/0x390
vfs_write+0x27c/0x390
ksys_write+0x63/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
KASAN report:
BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50
Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71
Workqueue: events nfcsim_recv_wq [nfcsim]
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x21/0x140
? digital_send_cmd_complete+0x16/0x50
? digital_send_cmd_complete+0x16/0x50
kasan_report.cold+0x7f/0x11b
? digital_send_cmd_complete+0x16/0x50
? digital_dep_link_down+0x60/0x60
digital_send_cmd_complete+0x16/0x50
nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]
? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]
? lock_is_held_type+0x98/0x110
? finish_wait+0x110/0x110
? rcu_read_lock_sched_held+0x9c/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x12e/0x1f0
This flow of calling digital_send_cmd_complete() callback on driver exit
is specific to nfcsim which implements reading and sending work queues.
Since the NFC digital device was unregistered, the callback should not
be called.
Fixes: 204bddcb508f ("NFC: nfcsim: Make use of the Digital layer")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcsim.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/nfc/nfcsim.c
+++ b/drivers/nfc/nfcsim.c
@@ -201,8 +201,7 @@ static void nfcsim_recv_wq(struct work_s
if (!IS_ERR(skb))
dev_kfree_skb(skb);
-
- skb = ERR_PTR(-ENODEV);
+ return;
}
dev->cb(dev->nfc_digital_dev, dev->arg, skb);
From: Eric Dumazet <[email protected]>
commit 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db upstream.
Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") brought a ~10% performance drop.
The reason for the performance drop was that GRO was forced
to chain sk_buff (using skb_shinfo(skb)->frag_list), which
uses more memory but also cause packet consumers to go over
a lot of overhead handling all the tiny skbs.
It turns out that virtio_net page_to_skb() has a wrong strategy :
It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then
copies 128 bytes from the page, before feeding the packet to GRO stack.
This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") because GRO was using 2 frags per MSS,
meaning we were not packing MSS with 100% efficiency.
Fix is to pull only the ethernet header in page_to_skb()
Then, we change virtio_net_hdr_to_skb() to pull the missing
headers, instead of assuming they were already pulled by callers.
This fixes the performance regression, but could also allow virtio_net
to accept packets with more than 128bytes of headers.
Many thanks to Xuan Zhuo for his report, and his tests/help.
Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs")
Reported-by: Xuan Zhuo <[email protected]>
Link: https://www.spinics.net/lists/netdev/msg731397.html
Co-Developed-by: Xuan Zhuo <[email protected]>
Signed-off-by: Xuan Zhuo <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: [email protected]
Acked-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/virtio_net.c | 10 +++++++---
include/linux/virtio_net.h | 14 +++++++++-----
2 files changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -413,9 +413,13 @@ static struct sk_buff *page_to_skb(struc
offset += hdr_padded_len;
p += hdr_padded_len;
- copy = len;
- if (copy > skb_tailroom(skb))
- copy = skb_tailroom(skb);
+ /* Copy all frame if it fits skb->head, otherwise
+ * we let virtio_net_hdr_to_skb() and GRO pull headers as needed.
+ */
+ if (len <= skb_tailroom(skb))
+ copy = len;
+ else
+ copy = ETH_HLEN + metasize;
skb_put_data(skb, p, copy);
if (metasize) {
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -65,14 +65,18 @@ static inline int virtio_net_hdr_to_skb(
skb_reset_mac_header(skb);
if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
- u16 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
- u16 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
+ u32 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
+ u32 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
+ u32 needed = start + max_t(u32, thlen, off + sizeof(__sum16));
+
+ if (!pskb_may_pull(skb, needed))
+ return -EINVAL;
if (!skb_partial_csum_set(skb, start, off))
return -EINVAL;
p_off = skb_transport_offset(skb) + thlen;
- if (p_off > skb_headlen(skb))
+ if (!pskb_may_pull(skb, p_off))
return -EINVAL;
} else {
/* gso packets without NEEDS_CSUM do not set transport_offset.
@@ -102,14 +106,14 @@ retry:
}
p_off = keys.control.thoff + thlen;
- if (p_off > skb_headlen(skb) ||
+ if (!pskb_may_pull(skb, p_off) ||
keys.basic.ip_proto != ip_proto)
return -EINVAL;
skb_set_transport_header(skb, keys.control.thoff);
} else if (gso_type) {
p_off = thlen;
- if (p_off > skb_headlen(skb))
+ if (!pskb_may_pull(skb, p_off))
return -EINVAL;
}
}
From: Ziyang Xuan <[email protected]>
commit 54f93336d000229f72c26d8a3f69dd256b744528 upstream.
We get a bug during ltp can_filter test as following.
===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617] <IRQ>
[60919.487122] ? update_load_avg+0x89/0x5d0
[60919.498478] ? update_load_avg+0x89/0x5d0
[60919.509822] ? account_entity_enqueue+0xc5/0xf0
[60919.520709] security_sock_rcv_skb+0x2a/0x40
[60919.531413] sk_filter_trim_cap+0x47/0x1b0
[60919.542178] ? kmem_cache_alloc+0x38/0x1b0
[60919.552444] sock_queue_rcv_skb+0x17/0x30
[60919.562477] raw_rcv+0x110/0x190 [can_raw]
[60919.572539] can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173] can_receive+0x6b/0xb0 [can]
[60919.591595] can_rcv+0x31/0x70 [can]
[60919.600783] __netif_receive_skb_one_core+0x5a/0x80
[60919.609864] process_backlog+0x9b/0x150
[60919.618691] net_rx_action+0x156/0x400
[60919.627310] ? sched_clock_cpu+0xc/0xa0
[60919.635714] __do_softirq+0xe8/0x2e9
[60919.644161] do_softirq_own_stack+0x2a/0x40
[60919.652154] </IRQ>
[60919.659899] do_softirq.part.17+0x4f/0x60
[60919.667475] __local_bh_enable_ip+0x60/0x70
[60919.675089] __dev_queue_xmit+0x539/0x920
[60919.682267] ? finish_wait+0x80/0x80
[60919.689218] ? finish_wait+0x80/0x80
[60919.695886] ? sock_alloc_send_pskb+0x211/0x230
[60919.702395] ? can_send+0xe5/0x1f0 [can]
[60919.708882] can_send+0xe5/0x1f0 [can]
[60919.715037] raw_sendmsg+0x16d/0x268 [can_raw]
It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.
cpu0 cpu1
raw_bind
raw_setsockopt unregister_netdevice_many
unlist_netdevice
dev_get_by_index raw_notifier
raw_enable_filters ......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)
......
sock_close
raw_release(sock_a)
......
can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG
After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.
We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().
Fixes: c18ce101f2e4 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Signed-off-by: Ziyang Xuan <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/raw.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -549,10 +549,18 @@ static int raw_setsockopt(struct socket
return -EFAULT;
}
+ rtnl_lock();
lock_sock(sk);
- if (ro->bound && ro->ifindex)
+ if (ro->bound && ro->ifindex) {
dev = dev_get_by_index(sock_net(sk), ro->ifindex);
+ if (!dev) {
+ if (count > 1)
+ kfree(filter);
+ err = -ENODEV;
+ goto out_fil;
+ }
+ }
if (ro->bound) {
/* (try to) register the new filters */
@@ -591,6 +599,7 @@ static int raw_setsockopt(struct socket
dev_put(dev);
release_sock(sk);
+ rtnl_unlock();
break;
@@ -603,10 +612,16 @@ static int raw_setsockopt(struct socket
err_mask &= CAN_ERR_MASK;
+ rtnl_lock();
lock_sock(sk);
- if (ro->bound && ro->ifindex)
+ if (ro->bound && ro->ifindex) {
dev = dev_get_by_index(sock_net(sk), ro->ifindex);
+ if (!dev) {
+ err = -ENODEV;
+ goto out_err;
+ }
+ }
/* remove current error mask */
if (ro->bound) {
@@ -630,6 +645,7 @@ static int raw_setsockopt(struct socket
dev_put(dev);
release_sock(sk);
+ rtnl_unlock();
break;
From: Pavel Skripkin <[email protected]>
commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream.
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see ems_usb_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/ems_usb.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -267,6 +267,8 @@ struct ems_usb {
unsigned int free_slots; /* remember number of available slots */
struct ems_cpc_msg active_params; /* active controller parameters */
+ void *rxbuf[MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[MAX_RX_URBS];
};
static void ems_usb_read_interrupt_callback(struct urb *urb)
@@ -599,6 +601,7 @@ static int ems_usb_start(struct ems_usb
for (i = 0; i < MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf = NULL;
+ dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -608,7 +611,7 @@ static int ems_usb_start(struct ems_usb
}
buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
- &urb->transfer_dma);
+ &buf_dma);
if (!buf) {
netdev_err(netdev, "No memory left for USB buffer\n");
usb_free_urb(urb);
@@ -616,6 +619,8 @@ static int ems_usb_start(struct ems_usb
break;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
buf, RX_BUFFER_SIZE,
ems_usb_read_bulk_callback, dev);
@@ -631,6 +636,9 @@ static int ems_usb_start(struct ems_usb
break;
}
+ dev->rxbuf[i] = buf;
+ dev->rxbuf_dma[i] = buf_dma;
+
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
}
@@ -696,6 +704,10 @@ static void unlink_all_urbs(struct ems_u
usb_kill_anchored_urbs(&dev->rx_submitted);
+ for (i = 0; i < MAX_RX_URBS; ++i)
+ usb_free_coherent(dev->udev, RX_BUFFER_SIZE,
+ dev->rxbuf[i], dev->rxbuf_dma[i]);
+
usb_kill_anchored_urbs(&dev->tx_submitted);
atomic_set(&dev->active_tx_urbs, 0);
From: Florian Westphal <[email protected]>
[ Upstream commit 30a56a2b881821625f79837d4d968c679852444e ]
In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.
This adjusts the stop value based on how much time has passed.
Fixes: b87a2f9199ea82 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 1dceda3c0e75..c5590d36b775 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -630,8 +630,13 @@ bool nf_ct_delete(struct nf_conn *ct, u32 portid, int report)
return false;
tstamp = nf_conn_tstamp_find(ct);
- if (tstamp && tstamp->stop == 0)
+ if (tstamp) {
+ s32 timeout = ct->timeout - nfct_time_stamp;
+
tstamp->stop = ktime_get_real_ns();
+ if (timeout < 0)
+ tstamp->stop -= jiffies_to_nsecs(-timeout);
+ }
if (nf_conntrack_event_report(IPCT_DESTROY, ct,
portid, report) < 0) {
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit a33f387ecd5aafae514095c2c4a8c24f7aea7e8b ]
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.
Fixes: d07db9884a5f ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_nat.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index 3e82a7d0df2a..2c3d7ff6f58a 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -153,7 +153,9 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
alen = FIELD_SIZEOF(struct nf_nat_range, min_addr.ip6);
break;
default:
- return -EAFNOSUPPORT;
+ if (tb[NFTA_NAT_REG_ADDR_MIN])
+ return -EAFNOSUPPORT;
+ break;
}
priv->family = family;
--
2.30.2
From: Pavel Skripkin <[email protected]>
commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream.
Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit 91c02557174b ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.
In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().
All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.
| DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set
Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Reported-by: Yasushi SHOJI <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Tested-by: Yasushi SHOJI <[email protected]>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -664,6 +664,8 @@ static int mcba_usb_start(struct mcba_pr
break;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, priv->udev,
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
buf, MCBA_USB_RX_BUFF_SIZE,
Hi!
> This is the start of the stable review cycle for the 4.19.201 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, 2 Aug 2021 at 19:19, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.201 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Aug 2021 13:43:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.201-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.19.201-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 7d0b2cf6631fd9776096a6a1bc52a89946f15d4c
* git describe: v4.19.200-31-g7d0b2cf6631f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.200-31-g7d0b2cf6631f
## No regressions (compared to v4.19.200-15-g5b0f1f3c91d6)
## No fixes (compared to v4.19.200-15-g5b0f1f3c91d6)
## Test result summary
total: 71236, pass: 55001, fail: 1762, skip: 12270, xfail: 2203,
## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
Hi Greg,
On Mon, Aug 02, 2021 at 03:44:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.201 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Aug 2021 13:43:24 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210723): 63 configs -> no failure
arm (gcc version 11.1.1 20210723): 116 configs -> no new failure
arm64 (gcc version 11.1.1 20210723): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Mon, Aug 02, 2021 at 03:44:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.201 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Aug 2021 13:43:24 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 435 pass: 435 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 2021/8/2 21:44, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.201 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Aug 2021 13:43:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.201-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.201-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.201-rc1
Commit: 7d0b2cf6631fd9776096a6a1bc52a89946f15d4c
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8858
passed: 8858
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8858
passed: 8858
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>