From: Arnd Bergmann <[email protected]>
Multiple switchdev drivers depend on CONFIG_NET_SWITCHDEV in Kconfig,
but have also gained a dependency on the bridge driver as they now
call switchdev_bridge_port_offload():
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: In function `sparx5_netdevice_event':
sparx5_switchdev.c:(.text+0x3cc): undefined reference to `switchdev_bridge_port_offload'
drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_netdevice_event':
cpsw_new.c:(.text+0x1098): undefined reference to `switchdev_bridge_port_offload'
Some of these drivers already have a 'BRIDGE || !BRIDGE' dependency
that avoids the link failure, but the 'rocker' driver was missing this
For MLXSW/MLX5, SPARX5_SWITCH, and TI_K3_AM65_CPSW_NUSS, the
driver can conditionally use switchdev support, which is then guarded
by another Kconfig symbol. For these, add a dependency on a new Kconfig
symbol NET_MAY_USE_SWITCHDEV that is defined to correctly model the
dependency: if switchdev support is enabled, these drivers cannot be
built-in when bridge support is in a module, but if either bridge or
switchdev is disabled, or both are built-in, there is no such restriction.
Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded")
Fixes: b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
Signed-off-by: Arnd Bergmann <[email protected]>
---
This version seems to pass my randconfig builds for the moment,
but that doesn't mean it's correct either. Please have a closer
look before this gets applied.
---
drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 1 +
drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 +
drivers/net/ethernet/netronome/Kconfig | 1 +
drivers/net/ethernet/ti/Kconfig | 1 +
net/switchdev/Kconfig | 5 +++++
5 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index e1a5a79e27c7..3a752e57c1e5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,6 +12,7 @@ config MLX5_CORE
depends on MLXFW || !MLXFW
depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
+ depends on NET_MAY_USE_SWITCHDEV
help
Core driver for low level functionality of the ConnectX-4 and
Connect-IB cards by Mellanox Technologies.
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index 12871c8dc7c1..dee3925bdaea 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -5,6 +5,7 @@
config MLXSW_CORE
tristate "Mellanox Technologies Switch ASICs support"
+ depends on NET_MAY_USE_SWITCHDEV
select NET_DEVLINK
select MLXFW
help
diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
index b82758d5beed..a298d19e8383 100644
--- a/drivers/net/ethernet/netronome/Kconfig
+++ b/drivers/net/ethernet/netronome/Kconfig
@@ -21,6 +21,7 @@ config NFP
depends on PCI && PCI_MSI
depends on VXLAN || VXLAN=n
depends on TLS && TLS_DEVICE || TLS_DEVICE=n
+ depends on NET_MAY_USE_SWITCHDEV
select NET_DEVLINK
select CRC32
help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 07192613256e..a73c6c236b25 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -93,6 +93,7 @@ config TI_CPTS
config TI_K3_AM65_CPSW_NUSS
tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
depends on OF && TI_K3_UDMA_GLUE_LAYER
+ depends on NET_MAY_USE_SWITCHDEV
select NET_DEVLINK
select TI_DAVINCI_MDIO
imply PHY_TI_GMII_SEL
diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig
index 18a2d980e11d..3b0e627a4519 100644
--- a/net/switchdev/Kconfig
+++ b/net/switchdev/Kconfig
@@ -12,3 +12,8 @@ config NET_SWITCHDEV
meaning of the word "switch". This include devices supporting L2/L3 but
also various flow offloading chips, including switches embedded into
SR-IOV NICs.
+
+config NET_MAY_USE_SWITCHDEV
+ def_tristate y
+ depends on NET_SWITCHDEV || NET_SWITCHDEV=n
+ depends on BRIDGE || NET_SWITCHDEV=n
--
2.29.2
On Mon, Aug 02, 2021 at 04:47:28PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <[email protected]>
>
> Multiple switchdev drivers depend on CONFIG_NET_SWITCHDEV in Kconfig,
> but have also gained a dependency on the bridge driver as they now
> call switchdev_bridge_port_offload():
>
> drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: In function `sparx5_netdevice_event':
> sparx5_switchdev.c:(.text+0x3cc): undefined reference to `switchdev_bridge_port_offload'
> drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_netdevice_event':
> cpsw_new.c:(.text+0x1098): undefined reference to `switchdev_bridge_port_offload'
>
> Some of these drivers already have a 'BRIDGE || !BRIDGE' dependency
> that avoids the link failure, but the 'rocker' driver was missing this
>
> For MLXSW/MLX5, SPARX5_SWITCH, and TI_K3_AM65_CPSW_NUSS, the
> driver can conditionally use switchdev support, which is then guarded
> by another Kconfig symbol. For these, add a dependency on a new Kconfig
> symbol NET_MAY_USE_SWITCHDEV that is defined to correctly model the
> dependency: if switchdev support is enabled, these drivers cannot be
> built-in when bridge support is in a module, but if either bridge or
> switchdev is disabled, or both are built-in, there is no such restriction.
>
> Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded")
> Fixes: b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> This version seems to pass my randconfig builds for the moment,
> but that doesn't mean it's correct either. Please have a closer
> look before this gets applied.
> ---
> drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 1 +
> drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 +
> drivers/net/ethernet/netronome/Kconfig | 1 +
> drivers/net/ethernet/ti/Kconfig | 1 +
> net/switchdev/Kconfig | 5 +++++
> 5 files changed, 9 insertions(+)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> index e1a5a79e27c7..3a752e57c1e5 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> @@ -12,6 +12,7 @@ config MLX5_CORE
> depends on MLXFW || !MLXFW
> depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
> depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
> + depends on NET_MAY_USE_SWITCHDEV
> help
> Core driver for low level functionality of the ConnectX-4 and
> Connect-IB cards by Mellanox Technologies.
MLX5_CORE does not appear to cover code that calls
switchdev_bridge_port_offload.
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> index 12871c8dc7c1..dee3925bdaea 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> @@ -5,6 +5,7 @@
>
> config MLXSW_CORE
> tristate "Mellanox Technologies Switch ASICs support"
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select MLXFW
> help
I think it is MLXSW_SPECTRUM rather than MLXSW_CORE
that controls compilation of spectrum_switchdev.c
which calls switchdev_bridge_port_offload.
But MLXSW_SPECTRUM seems to already depend on BRIDGE || BRIDGE=n
> diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
> index b82758d5beed..a298d19e8383 100644
> --- a/drivers/net/ethernet/netronome/Kconfig
> +++ b/drivers/net/ethernet/netronome/Kconfig
> @@ -21,6 +21,7 @@ config NFP
> depends on PCI && PCI_MSI
> depends on VXLAN || VXLAN=n
> depends on TLS && TLS_DEVICE || TLS_DEVICE=n
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select CRC32
> help
This seems wrong, the NFP driver doesn't call
switchdev_bridge_port_offload()
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 07192613256e..a73c6c236b25 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -93,6 +93,7 @@ config TI_CPTS
> config TI_K3_AM65_CPSW_NUSS
> tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
> depends on OF && TI_K3_UDMA_GLUE_LAYER
> + depends on NET_MAY_USE_SWITCHDEV
> select NET_DEVLINK
> select TI_DAVINCI_MDIO
> imply PHY_TI_GMII_SEL
I believe this has already been addressed by the following patch in net
b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
> diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig
> index 18a2d980e11d..3b0e627a4519 100644
> --- a/net/switchdev/Kconfig
> +++ b/net/switchdev/Kconfig
> @@ -12,3 +12,8 @@ config NET_SWITCHDEV
> meaning of the word "switch". This include devices supporting L2/L3 but
> also various flow offloading chips, including switches embedded into
> SR-IOV NICs.
> +
> +config NET_MAY_USE_SWITCHDEV
> + def_tristate y
> + depends on NET_SWITCHDEV || NET_SWITCHDEV=n
> + depends on BRIDGE || NET_SWITCHDEV=n
> --
> 2.29.2
>
On Mon, Aug 2, 2021 at 6:23 PM Simon Horman <[email protected]> wrote:
> On Mon, Aug 02, 2021 at 04:47:28PM +0200, Arnd Bergmann wrote:
> > ---
> > This version seems to pass my randconfig builds for the moment,
> > but that doesn't mean it's correct either. Please have a closer
> > look before this gets applied.
Thank you for taking a look, it seems I have done a particularly bad
job rebasing
the patch on top of the previous fix, leaving only the wrong bits ;-)
> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> > index e1a5a79e27c7..3a752e57c1e5 100644
> > --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
> > @@ -12,6 +12,7 @@ config MLX5_CORE
> > depends on MLXFW || !MLXFW
> > depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
> > depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
> > + depends on NET_MAY_USE_SWITCHDEV
> > help
> > Core driver for low level functionality of the ConnectX-4 and
> > Connect-IB cards by Mellanox Technologies.
>
> MLX5_CORE does not appear to cover code that calls
> switchdev_bridge_port_offload.
Ah right, I did get a link failure with my test build, but it was an
unrelated one:
ld: drivers/net/ethernet/mellanox/mlx5/core/esw/sample.o: in function
`mlx5_esw_sample_skb':
sample.c:(.text+0x5b4): undefined reference to `psample_sample_packet'
I think that one needs
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -90,6 +90,7 @@ config MLX5_BRIDGE
config MLX5_CLS_ACT
bool "MLX5 TC classifier action support"
depends on MLX5_ESWITCH && NET_CLS_ACT
+ depends on PSAMPLE=y || PSAMPLE=MLX5_CORE
default y
help
mlx5 ConnectX offloads support for TC classifier action (NET_CLS_ACT),
but this is unrelated and I have not tested that.
> > diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> > index 12871c8dc7c1..dee3925bdaea 100644
> > --- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> > +++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
> > @@ -5,6 +5,7 @@
> >
> > config MLXSW_CORE
> > tristate "Mellanox Technologies Switch ASICs support"
> > + depends on NET_MAY_USE_SWITCHDEV
> > select NET_DEVLINK
> > select MLXFW
> > help
>
> I think it is MLXSW_SPECTRUM rather than MLXSW_CORE
> that controls compilation of spectrum_switchdev.c
> which calls switchdev_bridge_port_offload.
>
> But MLXSW_SPECTRUM seems to already depend on BRIDGE || BRIDGE=n
Ok.
> > diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
> > index b82758d5beed..a298d19e8383 100644
> > --- a/drivers/net/ethernet/netronome/Kconfig
> > +++ b/drivers/net/ethernet/netronome/Kconfig
> > @@ -21,6 +21,7 @@ config NFP
> > depends on PCI && PCI_MSI
> > depends on VXLAN || VXLAN=n
> > depends on TLS && TLS_DEVICE || TLS_DEVICE=n
> > + depends on NET_MAY_USE_SWITCHDEV
> > select NET_DEVLINK
> > select CRC32
> > help
>
> This seems wrong, the NFP driver doesn't call
> switchdev_bridge_port_offload()
Ah right, I actually noticed that earlier and then forgot to remove that hunk.
Also: is this actually intended or should the driver call
switchdev_bridge_port_offload() like the other switchdev drivers do?
> > diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> > index 07192613256e..a73c6c236b25 100644
> > --- a/drivers/net/ethernet/ti/Kconfig
> > +++ b/drivers/net/ethernet/ti/Kconfig
> > @@ -93,6 +93,7 @@ config TI_CPTS
> > config TI_K3_AM65_CPSW_NUSS
> > tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
> > depends on OF && TI_K3_UDMA_GLUE_LAYER
> > + depends on NET_MAY_USE_SWITCHDEV
> > select NET_DEVLINK
> > select TI_DAVINCI_MDIO
> > imply PHY_TI_GMII_SEL
>
> I believe this has already been addressed by the following patch in net
>
> b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
I think the fix was wrong here, and that hunk should be reverted.
The dependency was added to a bool option, where it does not have
the intended effect.
I think this is the only remaining thing needed from my patch, so
the NET_MAY_USE_SWITCHDEV option is not needed either,
and it could be written as:
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 07192613256e..e49006a96d49 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -93,6 +93,7 @@ config TI_CPTS
config TI_K3_AM65_CPSW_NUSS
tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
depends on OF && TI_K3_UDMA_GLUE_LAYER
+ depends on (BRIDGE && NET_SWITCHDEV) || BRIDGE=n || NET_SWITCHDEV=n
select NET_DEVLINK
select TI_DAVINCI_MDIO
imply PHY_TI_GMII_SEL
@@ -110,7 +111,6 @@ config TI_K3_AM65_CPSW_NUSS
config TI_K3_AM65_CPSW_SWITCHDEV
bool "TI K3 AM654x/J721E CPSW Switch mode support"
depends on TI_K3_AM65_CPSW_NUSS
- depends on BRIDGE || BRIDGE=n
depends on NET_SWITCHDEV
help
This enables switchdev support for TI K3 CPSWxG Ethernet
If this looks correct to you, I can submit it as a standalone patch.
Arnd
On Mon, Aug 02, 2021 at 08:29:25PM +0200, Arnd Bergmann wrote:
> On Mon, Aug 2, 2021 at 6:23 PM Simon Horman <[email protected]> wrote:
> > On Mon, Aug 02, 2021 at 04:47:28PM +0200, Arnd Bergmann wrote:
> > > ---
> > > This version seems to pass my randconfig builds for the moment,
> > > but that doesn't mean it's correct either. Please have a closer
> > > look before this gets applied.
>
> Thank you for taking a look, it seems I have done a particularly bad
> job rebasing
> the patch on top of the previous fix, leaving only the wrong bits ;-)
:)
...
> > > diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
> > > index b82758d5beed..a298d19e8383 100644
> > > --- a/drivers/net/ethernet/netronome/Kconfig
> > > +++ b/drivers/net/ethernet/netronome/Kconfig
> > > @@ -21,6 +21,7 @@ config NFP
> > > depends on PCI && PCI_MSI
> > > depends on VXLAN || VXLAN=n
> > > depends on TLS && TLS_DEVICE || TLS_DEVICE=n
> > > + depends on NET_MAY_USE_SWITCHDEV
> > > select NET_DEVLINK
> > > select CRC32
> > > help
> >
> > This seems wrong, the NFP driver doesn't call
> > switchdev_bridge_port_offload()
>
> Ah right, I actually noticed that earlier and then forgot to remove that hunk.
>
> Also: is this actually intended or should the driver call
> switchdev_bridge_port_offload() like the other switchdev drivers do?
The NFP driver doesn't implement /use this part of the switchdev API.
It is intentional given the current scope of features implemented.
> > > diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> > > index 07192613256e..a73c6c236b25 100644
> > > --- a/drivers/net/ethernet/ti/Kconfig
> > > +++ b/drivers/net/ethernet/ti/Kconfig
> > > @@ -93,6 +93,7 @@ config TI_CPTS
> > > config TI_K3_AM65_CPSW_NUSS
> > > tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
> > > depends on OF && TI_K3_UDMA_GLUE_LAYER
> > > + depends on NET_MAY_USE_SWITCHDEV
> > > select NET_DEVLINK
> > > select TI_DAVINCI_MDIO
> > > imply PHY_TI_GMII_SEL
> >
> > I believe this has already been addressed by the following patch in net
> >
> > b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")
>
> I think the fix was wrong here, and that hunk should be reverted.
> The dependency was added to a bool option, where it does not have
> the intended effect.
>
> I think this is the only remaining thing needed from my patch, so
> the NET_MAY_USE_SWITCHDEV option is not needed either,
> and it could be written as:
>
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 07192613256e..e49006a96d49 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -93,6 +93,7 @@ config TI_CPTS
> config TI_K3_AM65_CPSW_NUSS
> tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
> depends on OF && TI_K3_UDMA_GLUE_LAYER
> + depends on (BRIDGE && NET_SWITCHDEV) || BRIDGE=n || NET_SWITCHDEV=n
> select NET_DEVLINK
> select TI_DAVINCI_MDIO
> imply PHY_TI_GMII_SEL
> @@ -110,7 +111,6 @@ config TI_K3_AM65_CPSW_NUSS
> config TI_K3_AM65_CPSW_SWITCHDEV
> bool "TI K3 AM654x/J721E CPSW Switch mode support"
> depends on TI_K3_AM65_CPSW_NUSS
> - depends on BRIDGE || BRIDGE=n
> depends on NET_SWITCHDEV
> help
> This enables switchdev support for TI K3 CPSWxG Ethernet
>
> If this looks correct to you, I can submit it as a standalone patch.
Is there a conflict between your proposed change and the
presence of "depends on NET_SWITCHDEV" ?
BTW, I'm not sure I know how to compile TI_K3_AM65_CPSW_NUSS.
So I'm perhaps not the best arbiter of correctness here.
On Mon, Aug 02, 2021 at 08:29:25PM +0200, Arnd Bergmann wrote:
> If this looks correct to you, I can submit it as a standalone patch.
I think it's easiest I just ask you to provide a .config that triggers
actual build failures and we can go from there.
On Mon, Aug 2, 2021 at 9:05 PM Vladimir Oltean <[email protected]> wrote:
>
> On Mon, Aug 02, 2021 at 08:29:25PM +0200, Arnd Bergmann wrote:
> > If this looks correct to you, I can submit it as a standalone patch.
>
> I think it's easiest I just ask you to provide a .config that triggers
> actual build failures and we can go from there.
This one is with an arm64 allmodconfig, plus
CONFIG_PTP_1588_CLOCK=y
CONFIG_TI_K3_AM65_CPTS=y
CONFIG_TI_K3_AM65_CPSW_NUSS=y
Arnd
On Mon, Aug 02, 2021 at 09:55:20PM +0200, Arnd Bergmann wrote:
> On Mon, Aug 2, 2021 at 9:05 PM Vladimir Oltean <[email protected]> wrote:
> >
> > On Mon, Aug 02, 2021 at 08:29:25PM +0200, Arnd Bergmann wrote:
> > > If this looks correct to you, I can submit it as a standalone patch.
> >
> > I think it's easiest I just ask you to provide a .config that triggers
> > actual build failures and we can go from there.
>
> This one is with an arm64 allmodconfig, plus
>
> CONFIG_PTP_1588_CLOCK=y
> CONFIG_TI_K3_AM65_CPTS=y
> CONFIG_TI_K3_AM65_CPSW_NUSS=y
Yeah, ok, I remember now, I saw that TI_CPSW_SWITCHDEV is tristate, and
incorrectly thought that TI_K3_AM65_CPSW_SWITCHDEV (which is mostly a
copy-paste job of the main cpsw anyway, makes you cringe that they wrote
a separate driver for it) is tristate too.
The options are either to make TI_K3_AM65_CPSW_SWITCHDEV tristate like
TI_CPSW_SWITCHDEV is, and to edit the Makefile accordingly to make
am65-cpsw-switchdev.o part of obj-$(CONFIG_TI_K3_AM65_CPSW_SWITCHDEV),
or to extend the BRIDGE || BRIDGE=n dependency to TI_K3_AM65_CPSW_NUSS
which is the direct tristate dependency of CONFIG_TI_K3_AM65_CPSW_SWITCHDEV,
and to make CONFIG_TI_K3_AM65_CPSW_SWITCHDEV simply depend on BRIDGE.
On Mon, Aug 2, 2021 at 10:21 PM Vladimir Oltean <[email protected]> wrote:
>
> On Mon, Aug 02, 2021 at 09:55:20PM +0200, Arnd Bergmann wrote:
> > On Mon, Aug 2, 2021 at 9:05 PM Vladimir Oltean <[email protected]> wrote:
> > >
> > > On Mon, Aug 02, 2021 at 08:29:25PM +0200, Arnd Bergmann wrote:
> > > > If this looks correct to you, I can submit it as a standalone patch.
> > >
> > > I think it's easiest I just ask you to provide a .config that triggers
> > > actual build failures and we can go from there.
> >
> > This one is with an arm64 allmodconfig, plus
> >
> > CONFIG_PTP_1588_CLOCK=y
> > CONFIG_TI_K3_AM65_CPTS=y
> > CONFIG_TI_K3_AM65_CPSW_NUSS=y
>
> Yeah, ok, I remember now, I saw that TI_CPSW_SWITCHDEV is tristate, and
> incorrectly thought that TI_K3_AM65_CPSW_SWITCHDEV (which is mostly a
> copy-paste job of the main cpsw anyway, makes you cringe that they wrote
> a separate driver for it) is tristate too.
Right.
> The options are either to make TI_K3_AM65_CPSW_SWITCHDEV tristate like
> TI_CPSW_SWITCHDEV is, and to edit the Makefile accordingly to make
> am65-cpsw-switchdev.o part of obj-$(CONFIG_TI_K3_AM65_CPSW_SWITCHDEV),
This probably won't work as this is currently part of the ti-am65-cpsw-nuss.ko
module, so I would assume that it's not easy to separate from the main module.
> or to extend the BRIDGE || BRIDGE=n dependency to TI_K3_AM65_CPSW_NUSS
> which is the direct tristate dependency of CONFIG_TI_K3_AM65_CPSW_SWITCHDEV,
That would work, but it's slightly more heavy-handed than my proposal, as this
prevents TI_K3_AM65_CPSW_NUSS from being built-in when BRIDGE is a module,
even when switchdev support is completely disabled.
> and to make CONFIG_TI_K3_AM65_CPSW_SWITCHDEV simply depend on BRIDGE.
This would not be needed then I think.
Arnd
On Mon, Aug 02, 2021 at 10:44:04PM +0200, Arnd Bergmann wrote:
> > or to extend the BRIDGE || BRIDGE=n dependency to TI_K3_AM65_CPSW_NUSS
> > which is the direct tristate dependency of CONFIG_TI_K3_AM65_CPSW_SWITCHDEV,
>
> That would work, but it's slightly more heavy-handed than my proposal, as this
> prevents TI_K3_AM65_CPSW_NUSS from being built-in when BRIDGE is a module,
> even when switchdev support is completely disabled.
>
> > and to make CONFIG_TI_K3_AM65_CPSW_SWITCHDEV simply depend on BRIDGE.
>
> This would not be needed then I think.
I've tested this change according to your suggestion:
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 7ac8e5ecbe97..a9980cfc504b 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -93,6 +93,7 @@ config TI_CPTS
config TI_K3_AM65_CPSW_NUSS
tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+ depends on (BRIDGE && NET_SWITCHDEV) || BRIDGE=n || NET_SWITCHDEV=n
select NET_DEVLINK
select TI_DAVINCI_MDIO
imply PHY_TI_GMII_SEL
(1/2) Stage this hunk [y,n,q,a,d,j,J,g,/,e,?]? y
@@ -110,7 +111,6 @@ config TI_K3_AM65_CPSW_NUSS
config TI_K3_AM65_CPSW_SWITCHDEV
bool "TI K3 AM654x/J721E CPSW Switch mode support"
depends on TI_K3_AM65_CPSW_NUSS
- depends on BRIDGE || BRIDGE=n
depends on NET_SWITCHDEV
help
This enables switchdev support for TI K3 CPSWxG Ethernet
and it does appear to work, so when you resubmit please feel free to add:
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Thanks and sorry for breaking the dependency chain yet again! It takes
time to learn this stuff.