When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
v1->v2: Remove the separate line of PTR_ERR().
drivers/iio/adc/ab8500-gpadc.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
index 7b5212ba5501..c58d0e2ae538 100644
--- a/drivers/iio/adc/ab8500-gpadc.c
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -1146,11 +1146,9 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
/* The VTVout LDO used to power the AB8500 GPADC */
gpadc->vddadc = devm_regulator_get(dev, "vddadc");
- if (IS_ERR(gpadc->vddadc)) {
- ret = PTR_ERR(gpadc->vddadc);
- dev_err(dev, "failed to get vddadc\n");
- return ret;
- }
+ if (IS_ERR(gpadc->vddadc))
+ return dev_err_probe(dev, PTR_ERR(gpadc->vddadc),
+ "failed to get vddadc\n");
ret = regulator_enable(gpadc->vddadc);
if (ret) {
--
2.25.1
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
drivers/iio/adc/max1118.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/max1118.c b/drivers/iio/adc/max1118.c
index 8cec9d949083..a41bc570be21 100644
--- a/drivers/iio/adc/max1118.c
+++ b/drivers/iio/adc/max1118.c
@@ -221,10 +221,9 @@ static int max1118_probe(struct spi_device *spi)
if (id->driver_data == max1118) {
adc->reg = devm_regulator_get(&spi->dev, "vref");
- if (IS_ERR(adc->reg)) {
- dev_err(&spi->dev, "failed to get vref regulator\n");
- return PTR_ERR(adc->reg);
- }
+ if (IS_ERR(adc->reg))
+ return dev_err_probe(&spi->dev, PTR_ERR(adc->reg),
+ "failed to get vref regulator\n");
ret = regulator_enable(adc->reg);
if (ret)
return ret;
--
2.25.1
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
v1->v2: Remove the separate line of PTR_ERR().
drivers/iio/adc/meson_saradc.c | 39 +++++++++++++-----------------
1 file changed, 17 insertions(+), 22 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 705d5e11a54b..014a77f98b98 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1230,35 +1230,31 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
return ret;
priv->clkin = devm_clk_get(&pdev->dev, "clkin");
- if (IS_ERR(priv->clkin)) {
- dev_err(&pdev->dev, "failed to get clkin\n");
- return PTR_ERR(priv->clkin);
- }
+ if (IS_ERR(priv->clkin))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->clkin),
+ "failed to get clkin\n");
priv->core_clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(priv->core_clk)) {
- dev_err(&pdev->dev, "failed to get core clk\n");
- return PTR_ERR(priv->core_clk);
- }
+ if (IS_ERR(priv->core_clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
+ "failed to get core clk\n");
priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
if (IS_ERR(priv->adc_clk)) {
- if (PTR_ERR(priv->adc_clk) == -ENOENT) {
+ if (PTR_ERR(priv->adc_clk) == -ENOENT)
priv->adc_clk = NULL;
- } else {
- dev_err(&pdev->dev, "failed to get adc clk\n");
- return PTR_ERR(priv->adc_clk);
- }
+ else
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_clk),
+ "failed to get adc clk\n");
}
priv->adc_sel_clk = devm_clk_get(&pdev->dev, "adc_sel");
if (IS_ERR(priv->adc_sel_clk)) {
- if (PTR_ERR(priv->adc_sel_clk) == -ENOENT) {
+ if (PTR_ERR(priv->adc_sel_clk) == -ENOENT)
priv->adc_sel_clk = NULL;
- } else {
- dev_err(&pdev->dev, "failed to get adc_sel clk\n");
- return PTR_ERR(priv->adc_sel_clk);
- }
+ else
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_sel_clk),
+ "failed to get adc_sel clk\n");
}
/* on pre-GXBB SoCs the SAR ADC itself provides the ADC clock: */
@@ -1265,10 +1265,9 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
}
priv->vref = devm_regulator_get(&pdev->dev, "vref");
- if (IS_ERR(priv->vref)) {
- dev_err(&pdev->dev, "failed to get vref regulator\n");
- return PTR_ERR(priv->vref);
- }
+ if (IS_ERR(priv->vref))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
+ "failed to get vref regulator\n");
priv->calibscale = MILLION;
--
2.25.1
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
v1->v2: Remove the separate line of PTR_ERR().
drivers/iio/adc/rockchip_saradc.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index a56a0d7337ca..57419ccb3c70 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -392,11 +392,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
}
info->vref = devm_regulator_get(&pdev->dev, "vref");
- if (IS_ERR(info->vref)) {
- dev_err(&pdev->dev, "failed to get regulator, %ld\n",
- PTR_ERR(info->vref));
- return PTR_ERR(info->vref);
- }
+ if (IS_ERR(info->vref))
+ return dev_err_probe(&pdev->dev, PTR_ERR(info->vref),
+ "failed to get regulator\n");
if (info->reset)
rockchip_saradc_reset_controller(info->reset);
--
2.25.1
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 0610bf254771..21d7eff645c3 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -910,16 +910,15 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
map = dev_get_regmap(dev->parent, NULL);
if (!map) {
dev_err(dev, "parent regmap unavailable.\n");
- return -ENXIO;
+ return -ENODEV;
}
adc->map = map;
/* Bring up regulator */
adc->vref = devm_regulator_get(dev, "xoadc-ref");
- if (IS_ERR(adc->vref)) {
- dev_err(dev, "failed to get XOADC VREF regulator\n");
- return PTR_ERR(adc->vref);
- }
+ if (IS_ERR(adc->vref))
+ return dev_err_probe(dev, PTR_ERR(adc->vref),
+ "failed to get XOADC VREF regulator\n");
ret = regulator_enable(adc->vref);
if (ret) {
dev_err(dev, "failed to enable XOADC VREF regulator\n");
--
2.25.1
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
drivers/iio/adc/ti-ads7950.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index a2b83f0bd526..a7efa3eada2c 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -600,8 +600,8 @@ static int ti_ads7950_probe(struct spi_device *spi)
st->reg = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(st->reg)) {
- dev_err(&spi->dev, "Failed to get regulator \"vref\"\n");
- ret = PTR_ERR(st->reg);
+ ret = dev_err_probe(&spi->dev, PTR_ERR(st->reg),
+ "Failed to get regulator \"vref\"\n");
goto error_destroy_mutex;
}
--
2.25.1
On Tue, Sep 28, 2021 at 3:36 AM Cai Huoqing <[email protected]> wrote:
> When possible use dev_err_probe help to properly deal with the
> PROBE_DEFER error, the benefit is that DEFER issue will be logged
> in the devices_deferred debugfs file.
> Using dev_err_probe() can reduce code size, and the error value
> gets printed.
>
> Signed-off-by: Cai Huoqing <[email protected]>
> ---
> v1->v2: Remove the separate line of PTR_ERR().
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Tue, Sep 28, 2021 at 3:37 AM Cai Huoqing <[email protected]> wrote:
> When possible use dev_err_probe help to properly deal with the
> PROBE_DEFER error, the benefit is that DEFER issue will be logged
> in the devices_deferred debugfs file.
> Using dev_err_probe() can reduce code size, and the error value
> gets printed.
>
> Signed-off-by: Cai Huoqing <[email protected]>
(...)
> - return -ENXIO;
> + return -ENODEV;
Why?
I think it's the right change, but should be in the changelog.
Yours,
Linus Walleij