When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will
give an alert "rx timeout, send abort", but do nothing actually.
Move the alert into session active judgment condition, it is more
reasonable.
One of the scenarioes is that j1939_tp_rxtimer() execute followed by
j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session
state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Ziyang Xuan <[email protected]>
---
net/can/j1939/transport.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 0f8309314075..d3f0a062b400 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1226,12 +1226,11 @@ static enum hrtimer_restart j1939_tp_rxtimer(struct hrtimer *hrtimer)
session->err = -ETIME;
j1939_session_deactivate(session);
} else {
- netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
- __func__, session);
-
j1939_session_list_lock(session->priv);
if (session->state >= J1939_SESSION_ACTIVE &&
session->state < J1939_SESSION_ACTIVE_MAX) {
+ netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
+ __func__, session);
j1939_session_get(session);
hrtimer_start(&session->rxtimer,
ms_to_ktime(J1939_XTP_ABORT_TIMEOUT_MS),
--
2.25.1
On Mon, Sep 06, 2021 at 05:42:19PM +0800, Ziyang Xuan wrote:
> When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will
> give an alert "rx timeout, send abort", but do nothing actually.
> Move the alert into session active judgment condition, it is more
> reasonable.
>
> One of the scenarioes is that j1939_tp_rxtimer() execute followed by
> j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session
> state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert.
>
> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
> Signed-off-by: Ziyang Xuan <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Thank you!
> ---
> net/can/j1939/transport.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
> index 0f8309314075..d3f0a062b400 100644
> --- a/net/can/j1939/transport.c
> +++ b/net/can/j1939/transport.c
> @@ -1226,12 +1226,11 @@ static enum hrtimer_restart j1939_tp_rxtimer(struct hrtimer *hrtimer)
> session->err = -ETIME;
> j1939_session_deactivate(session);
> } else {
> - netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
> - __func__, session);
> -
> j1939_session_list_lock(session->priv);
> if (session->state >= J1939_SESSION_ACTIVE &&
> session->state < J1939_SESSION_ACTIVE_MAX) {
> + netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
> + __func__, session);
> j1939_session_get(session);
> hrtimer_start(&session->rxtimer,
> ms_to_ktime(J1939_XTP_ABORT_TIMEOUT_MS),
> --
> 2.25.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On 06.09.2021 17:42:19, Ziyang Xuan wrote:
> When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will
> give an alert "rx timeout, send abort", but do nothing actually.
> Move the alert into session active judgment condition, it is more
> reasonable.
>
> One of the scenarioes is that j1939_tp_rxtimer() execute followed by
scenarios
Typo fixed while applying.
> j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session
> state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert.
>
> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
> Signed-off-by: Ziyang Xuan <[email protected]>
Added to linux-can/testing, added stable on Cc.
Thanks,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |