This series adds some fixes for the HNS3 ethernet driver.
Guangbin Huang (4):
net: hns3: fix pause config problem after autoneg disabled
net: hns3: ignore reset event before initialization process is done
net: hns3: expand buffer len for some debugfs command
net: hns3: adjust string spaces of some parameters of tx bd info in
debugfs
Jie Wang (2):
net: hns3: fix data endian problem of some functions of debugfs
net: hns3: add more string spaces for dumping packets number of queue
info in debugfs
Yufeng Mo (1):
net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND mode
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
.../ethernet/hisilicon/hns3/hns3_debugfs.c | 16 ++---
.../ethernet/hisilicon/hns3/hns3_ethtool.c | 33 +++++++---
.../hisilicon/hns3/hns3pf/hclge_debugfs.c | 30 ++++-----
.../hisilicon/hns3/hns3pf/hclge_main.c | 65 ++++++++++---------
.../hisilicon/hns3/hns3pf/hclge_main.h | 1 -
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 +
.../hisilicon/hns3/hns3vf/hclgevf_main.c | 5 +-
.../hisilicon/hns3/hns3vf/hclgevf_main.h | 1 +
10 files changed, 90 insertions(+), 65 deletions(-)
--
2.33.0
From: Jie Wang <[email protected]>
The member data in struct hclge_desc is type of __le32, it needs endian
conversion before using it, and some functions of debugfs didn't do that,
so this patch fixes it.
Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_debugfs.c | 30 +++++++++----------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
index 32f62cd2dd99..9cda8b3562b8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -391,7 +391,7 @@ static int hclge_dbg_dump_mac(struct hclge_dev *hdev, char *buf, int len)
static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len,
int *pos)
{
- struct hclge_dbg_bitmap_cmd *bitmap;
+ struct hclge_dbg_bitmap_cmd req;
struct hclge_desc desc;
u16 qset_id, qset_num;
int ret;
@@ -408,12 +408,12 @@ static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len,
if (ret)
return ret;
- bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1];
+ req.bitmap = (u8)le32_to_cpu(desc.data[1]);
*pos += scnprintf(buf + *pos, len - *pos,
"%04u %#x %#x %#x %#x\n",
- qset_id, bitmap->bit0, bitmap->bit1,
- bitmap->bit2, bitmap->bit3);
+ qset_id, req.bit0, req.bit1, req.bit2,
+ req.bit3);
}
return 0;
@@ -422,7 +422,7 @@ static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len,
static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len,
int *pos)
{
- struct hclge_dbg_bitmap_cmd *bitmap;
+ struct hclge_dbg_bitmap_cmd req;
struct hclge_desc desc;
u8 pri_id, pri_num;
int ret;
@@ -439,12 +439,11 @@ static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len,
if (ret)
return ret;
- bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1];
+ req.bitmap = (u8)le32_to_cpu(desc.data[1]);
*pos += scnprintf(buf + *pos, len - *pos,
"%03u %#x %#x %#x\n",
- pri_id, bitmap->bit0, bitmap->bit1,
- bitmap->bit2);
+ pri_id, req.bit0, req.bit1, req.bit2);
}
return 0;
@@ -453,7 +452,7 @@ static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len,
static int hclge_dbg_dump_dcb_pg(struct hclge_dev *hdev, char *buf, int len,
int *pos)
{
- struct hclge_dbg_bitmap_cmd *bitmap;
+ struct hclge_dbg_bitmap_cmd req;
struct hclge_desc desc;
u8 pg_id;
int ret;
@@ -466,12 +465,11 @@ static int hclge_dbg_dump_dcb_pg(struct hclge_dev *hdev, char *buf, int len,
if (ret)
return ret;
- bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1];
+ req.bitmap = (u8)le32_to_cpu(desc.data[1]);
*pos += scnprintf(buf + *pos, len - *pos,
"%03u %#x %#x %#x\n",
- pg_id, bitmap->bit0, bitmap->bit1,
- bitmap->bit2);
+ pg_id, req.bit0, req.bit1, req.bit2);
}
return 0;
@@ -511,7 +509,7 @@ static int hclge_dbg_dump_dcb_queue(struct hclge_dev *hdev, char *buf, int len,
static int hclge_dbg_dump_dcb_port(struct hclge_dev *hdev, char *buf, int len,
int *pos)
{
- struct hclge_dbg_bitmap_cmd *bitmap;
+ struct hclge_dbg_bitmap_cmd req;
struct hclge_desc desc;
u8 port_id = 0;
int ret;
@@ -521,12 +519,12 @@ static int hclge_dbg_dump_dcb_port(struct hclge_dev *hdev, char *buf, int len,
if (ret)
return ret;
- bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1];
+ req.bitmap = (u8)le32_to_cpu(desc.data[1]);
*pos += scnprintf(buf + *pos, len - *pos, "port_mask: %#x\n",
- bitmap->bit0);
+ req.bit0);
*pos += scnprintf(buf + *pos, len - *pos, "port_shaping_pass: %#x\n",
- bitmap->bit1);
+ req.bit1);
return 0;
}
--
2.33.0
If a TP port is configured by follow steps:
1.ethtool -s ethx autoneg off speed 100 duplex full
2.ethtool -A ethx rx on tx on
3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
4.ethtool -s ethx autoneg off speed 100 duplex full
In step 3, driver will set rx&tx pause parameters of hardware to off as
pause parameters negotiated with link partner are off.
After step 4, the "ethtool -a ethx" command shows both rx and tx pause
parameters are on. However, pause parameters of hardware are still off
and port has no flow control function actually.
To fix this problem, if autoneg is disabled, driver uses its saved
parameters to restore pause of hardware. If the speed is not changed in
this case, there is no link state changed for phy, it will cause the pause
parameter is not taken effect, so we need to force phy to go down and up.
Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed")
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
.../ethernet/hisilicon/hns3/hns3_ethtool.c | 33 ++++++++++++++-----
.../hisilicon/hns3/hns3pf/hclge_main.c | 30 +++++++++++++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 +
5 files changed, 57 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index d701451596c8..da3a593f6a56 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -568,6 +568,7 @@ struct hnae3_ae_ops {
u32 *auto_neg, u32 *rx_en, u32 *tx_en);
int (*set_pauseparam)(struct hnae3_handle *handle,
u32 auto_neg, u32 rx_en, u32 tx_en);
+ int (*restore_pauseparam)(struct hnae3_handle *handle);
int (*set_autoneg)(struct hnae3_handle *handle, bool enable);
int (*get_autoneg)(struct hnae3_handle *handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 5ebd96f6833d..7d92dd273ed7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -824,6 +824,26 @@ static int hns3_check_ksettings_param(const struct net_device *netdev,
return 0;
}
+static int hns3_set_phy_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct hnae3_handle *handle = hns3_get_handle(netdev);
+ const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+ int ret;
+
+ if (cmd->base.speed == SPEED_1000 &&
+ cmd->base.autoneg == AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (cmd->base.autoneg == AUTONEG_DISABLE && ops->restore_pauseparam) {
+ ret = ops->restore_pauseparam(handle);
+ if (ret)
+ return ret;
+ }
+
+ return phy_ethtool_ksettings_set(netdev->phydev, cmd);
+}
+
static int hns3_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
@@ -842,16 +862,11 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);
/* Only support ksettings_set for netdev with phy attached for now */
- if (netdev->phydev) {
- if (cmd->base.speed == SPEED_1000 &&
- cmd->base.autoneg == AUTONEG_DISABLE)
- return -EINVAL;
-
- return phy_ethtool_ksettings_set(netdev->phydev, cmd);
- } else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) &&
- ops->set_phy_link_ksettings) {
+ if (netdev->phydev)
+ return hns3_set_phy_link_ksettings(netdev, cmd);
+ else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) &&
+ ops->set_phy_link_ksettings)
return ops->set_phy_link_ksettings(handle, cmd);
- }
if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2)
return -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index dcd40cc73082..c6b9806c75a5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -11021,6 +11021,35 @@ static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
return -EOPNOTSUPP;
}
+static int hclge_restore_pauseparam(struct hnae3_handle *handle)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+ u32 auto_neg, rx_pause, tx_pause;
+ int ret;
+
+ hclge_get_pauseparam(handle, &auto_neg, &rx_pause, &tx_pause);
+ /* when autoneg is disabled, the pause setting of phy has no effect
+ * unless the link goes down.
+ */
+ ret = phy_suspend(hdev->hw.mac.phydev);
+ if (ret)
+ return ret;
+
+ phy_set_asym_pause(hdev->hw.mac.phydev, rx_pause, tx_pause);
+
+ ret = phy_resume(hdev->hw.mac.phydev);
+ if (ret)
+ return ret;
+
+ ret = hclge_mac_pause_setup_hw(hdev);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "restore pauseparam error, ret = %d.\n", ret);
+
+ return ret;
+}
+
static void hclge_get_ksettings_an_result(struct hnae3_handle *handle,
u8 *auto_neg, u32 *speed, u8 *duplex)
{
@@ -12984,6 +13013,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.halt_autoneg = hclge_halt_autoneg,
.get_pauseparam = hclge_get_pauseparam,
.set_pauseparam = hclge_set_pauseparam,
+ .restore_pauseparam = hclge_restore_pauseparam,
.set_mtu = hclge_set_mtu,
.reset_queue = hclge_reset_tqp,
.get_stats = hclge_get_stats,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 95074e91a846..124791e4bfee 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1435,7 +1435,7 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
return 0;
}
-static int hclge_mac_pause_setup_hw(struct hclge_dev *hdev)
+int hclge_mac_pause_setup_hw(struct hclge_dev *hdev)
{
bool tx_en, rx_en;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index 2ee9b795f71d..4b2c3a788980 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -244,6 +244,7 @@ int hclge_tm_get_pri_weight(struct hclge_dev *hdev, u8 pri_id, u8 *weight);
int hclge_tm_get_pri_shaper(struct hclge_dev *hdev, u8 pri_id,
enum hclge_opcode_type cmd,
struct hclge_tm_shaper_para *para);
+int hclge_mac_pause_setup_hw(struct hclge_dev *hdev);
int hclge_tm_get_q_to_qs_map(struct hclge_dev *hdev, u16 q_id, u16 *qset_id);
int hclge_tm_get_q_to_tc(struct hclge_dev *hdev, u16 q_id, u8 *tc_id);
int hclge_tm_get_pg_to_pri_map(struct hclge_dev *hdev, u8 pg_id,
--
2.33.0
The specified buffer length for three debugfs files fd_tcam, uc and tqp
is not enough for their maximum needs, so this patch fixes them.
Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs")
Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs")
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 3aaad96d0176..f2ade0446208 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -137,7 +137,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
.name = "uc",
.cmd = HNAE3_DBG_CMD_MAC_UC,
.dentry = HNS3_DBG_DENTRY_MAC,
- .buf_len = HNS3_DBG_READ_LEN,
+ .buf_len = HNS3_DBG_READ_LEN_128KB,
.init = hns3_dbg_common_file_init,
},
{
@@ -256,7 +256,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
.name = "tqp",
.cmd = HNAE3_DBG_CMD_REG_TQP,
.dentry = HNS3_DBG_DENTRY_REG,
- .buf_len = HNS3_DBG_READ_LEN,
+ .buf_len = HNS3_DBG_READ_LEN_128KB,
.init = hns3_dbg_common_file_init,
},
{
@@ -298,7 +298,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
.name = "fd_tcam",
.cmd = HNAE3_DBG_CMD_FD_TCAM,
.dentry = HNS3_DBG_DENTRY_FD,
- .buf_len = HNS3_DBG_READ_LEN,
+ .buf_len = HNS3_DBG_READ_LEN_1MB,
.init = hns3_dbg_common_file_init,
},
{
--
2.33.0
Hello:
This series was applied to netdev/net.git (master)
by David S. Miller <[email protected]>:
On Wed, 27 Oct 2021 20:11:42 +0800 you wrote:
> This series adds some fixes for the HNS3 ethernet driver.
>
> Guangbin Huang (4):
> net: hns3: fix pause config problem after autoneg disabled
> net: hns3: ignore reset event before initialization process is done
> net: hns3: expand buffer len for some debugfs command
> net: hns3: adjust string spaces of some parameters of tx bd info in
> debugfs
>
> [...]
Here is the summary with links:
- [net,1/7] net: hns3: fix pause config problem after autoneg disabled
https://git.kernel.org/netdev/net/c/3bda2e5df476
- [net,2/7] net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND mode
https://git.kernel.org/netdev/net/c/f29da4088fb4
- [net,3/7] net: hns3: ignore reset event before initialization process is done
https://git.kernel.org/netdev/net/c/0251d196b0e1
- [net,4/7] net: hns3: fix data endian problem of some functions of debugfs
https://git.kernel.org/netdev/net/c/2a21dab594a9
- [net,5/7] net: hns3: add more string spaces for dumping packets number of queue info in debugfs
https://git.kernel.org/netdev/net/c/6754614a787c
- [net,6/7] net: hns3: expand buffer len for some debugfs command
https://git.kernel.org/netdev/net/c/c7a6e3978ea9
- [net,7/7] net: hns3: adjust string spaces of some parameters of tx bd info in debugfs
https://git.kernel.org/netdev/net/c/630a6738da82
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
From: Yufeng Mo <[email protected]>
Currently, the workqueue of hclge/hclgevf is executed on
the CPU that initiates scheduling requests by default. In
stress scenarios, the CPU may be busy and workqueue scheduling
is completed after a long period of time. To avoid this
situation and implement proper scheduling, use the WQ_UNBOUND
mode instead. In this way, the workqueue can be performed on
a relatively idle CPU.
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 34 +++----------------
.../hisilicon/hns3/hns3pf/hclge_main.h | 1 -
.../hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +-
3 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index c6b9806c75a5..3dbde0496545 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2847,33 +2847,28 @@ static void hclge_mbx_task_schedule(struct hclge_dev *hdev)
{
if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
!test_and_set_bit(HCLGE_STATE_MBX_SERVICE_SCHED, &hdev->state))
- mod_delayed_work_on(cpumask_first(&hdev->affinity_mask),
- hclge_wq, &hdev->service_task, 0);
+ mod_delayed_work(hclge_wq, &hdev->service_task, 0);
}
static void hclge_reset_task_schedule(struct hclge_dev *hdev)
{
if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
!test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state))
- mod_delayed_work_on(cpumask_first(&hdev->affinity_mask),
- hclge_wq, &hdev->service_task, 0);
+ mod_delayed_work(hclge_wq, &hdev->service_task, 0);
}
static void hclge_errhand_task_schedule(struct hclge_dev *hdev)
{
if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
!test_and_set_bit(HCLGE_STATE_ERR_SERVICE_SCHED, &hdev->state))
- mod_delayed_work_on(cpumask_first(&hdev->affinity_mask),
- hclge_wq, &hdev->service_task, 0);
+ mod_delayed_work(hclge_wq, &hdev->service_task, 0);
}
void hclge_task_schedule(struct hclge_dev *hdev, unsigned long delay_time)
{
if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
!test_bit(HCLGE_STATE_RST_FAIL, &hdev->state))
- mod_delayed_work_on(cpumask_first(&hdev->affinity_mask),
- hclge_wq, &hdev->service_task,
- delay_time);
+ mod_delayed_work(hclge_wq, &hdev->service_task, delay_time);
}
static int hclge_get_mac_link_status(struct hclge_dev *hdev, int *link_status)
@@ -3491,33 +3486,14 @@ static void hclge_get_misc_vector(struct hclge_dev *hdev)
hdev->num_msi_used += 1;
}
-static void hclge_irq_affinity_notify(struct irq_affinity_notify *notify,
- const cpumask_t *mask)
-{
- struct hclge_dev *hdev = container_of(notify, struct hclge_dev,
- affinity_notify);
-
- cpumask_copy(&hdev->affinity_mask, mask);
-}
-
-static void hclge_irq_affinity_release(struct kref *ref)
-{
-}
-
static void hclge_misc_affinity_setup(struct hclge_dev *hdev)
{
irq_set_affinity_hint(hdev->misc_vector.vector_irq,
&hdev->affinity_mask);
-
- hdev->affinity_notify.notify = hclge_irq_affinity_notify;
- hdev->affinity_notify.release = hclge_irq_affinity_release;
- irq_set_affinity_notifier(hdev->misc_vector.vector_irq,
- &hdev->affinity_notify);
}
static void hclge_misc_affinity_teardown(struct hclge_dev *hdev)
{
- irq_set_affinity_notifier(hdev->misc_vector.vector_irq, NULL);
irq_set_affinity_hint(hdev->misc_vector.vector_irq, NULL);
}
@@ -13082,7 +13058,7 @@ static int hclge_init(void)
{
pr_info("%s is initializing\n", HCLGE_NAME);
- hclge_wq = alloc_workqueue("%s", 0, 0, HCLGE_NAME);
+ hclge_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, HCLGE_NAME);
if (!hclge_wq) {
pr_err("%s: failed to create workqueue\n", HCLGE_NAME);
return -ENOMEM;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index de6afbcbfbac..69cd8f87b4c8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -944,7 +944,6 @@ struct hclge_dev {
/* affinity mask and notify for misc interrupt */
cpumask_t affinity_mask;
- struct irq_affinity_notify affinity_notify;
struct hclge_ptp *ptp;
struct devlink *devlink;
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index bef6b98e2f50..5efa5420297d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -3899,7 +3899,7 @@ static int hclgevf_init(void)
{
pr_info("%s is initializing\n", HCLGEVF_NAME);
- hclgevf_wq = alloc_workqueue("%s", 0, 0, HCLGEVF_NAME);
+ hclgevf_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, HCLGEVF_NAME);
if (!hclgevf_wq) {
pr_err("%s: failed to create workqueue\n", HCLGEVF_NAME);
return -ENOMEM;
--
2.33.0
From: Jie Wang <[email protected]>
As the width of packets number registers is 32 bits, they needs at most
10 characters for decimal data printing, but now the string spaces is not
enough, so this patch fixes it.
Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 2b66c59f5eaf..3aaad96d0176 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -462,7 +462,7 @@ static const struct hns3_dbg_item rx_queue_info_items[] = {
{ "TAIL", 2 },
{ "HEAD", 2 },
{ "FBDNUM", 2 },
- { "PKTNUM", 2 },
+ { "PKTNUM", 5 },
{ "COPYBREAK", 2 },
{ "RING_EN", 2 },
{ "RX_RING_EN", 2 },
@@ -565,7 +565,7 @@ static const struct hns3_dbg_item tx_queue_info_items[] = {
{ "HEAD", 2 },
{ "FBDNUM", 2 },
{ "OFFSET", 2 },
- { "PKTNUM", 2 },
+ { "PKTNUM", 5 },
{ "RING_EN", 2 },
{ "TX_RING_EN", 2 },
{ "BASE_ADDR", 10 },
--
2.33.0
Currently, if there is a reset event triggered by RAS during device in
initialization process, driver may run reset process concurrently with
initialization process. In this case, it may cause problem. For example,
the RSS indirection table may has not been alloc memory in initialization
process yet, but it is used in reset process, it will cause a call trace
like this:
[61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
[61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf]
[61228.937248] sp : ffff8000162ebb50
[61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080
[61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080
[61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040
[61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030
[61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8
[61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960
[61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530
[61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011
[61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049
[61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480
[61229.027002] Call trace:
[61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf]
[61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf]
[61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf]
[61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf]
[61229.068491] process_one_work+0x1dc/0x48c
[61229.074121] worker_thread+0x15c/0x464
[61229.078562] kthread+0x168/0x16c
[61229.082873] ret_from_fork+0x10/0x18
[61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43)
[61229.095357] ---[ end trace 153661a538f6768c ]---
To fix this problem, don't schedule reset task before initialization
process is done.
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 +
3 files changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 3dbde0496545..269e579762b2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2853,6 +2853,7 @@ static void hclge_mbx_task_schedule(struct hclge_dev *hdev)
static void hclge_reset_task_schedule(struct hclge_dev *hdev)
{
if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) &&
+ test_bit(HCLGE_STATE_SERVICE_INITED, &hdev->state) &&
!test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state))
mod_delayed_work(hclge_wq, &hdev->service_task, 0);
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 5efa5420297d..cf00ad7bb881 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2232,6 +2232,7 @@ static void hclgevf_get_misc_vector(struct hclgevf_dev *hdev)
void hclgevf_reset_task_schedule(struct hclgevf_dev *hdev)
{
if (!test_bit(HCLGEVF_STATE_REMOVING, &hdev->state) &&
+ test_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state) &&
!test_and_set_bit(HCLGEVF_STATE_RST_SERVICE_SCHED,
&hdev->state))
mod_delayed_work(hclgevf_wq, &hdev->service_task, 0);
@@ -3449,6 +3450,8 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
hclgevf_init_rxd_adv_layout(hdev);
+ set_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state);
+
hdev->last_reset_time = jiffies;
dev_info(&hdev->pdev->dev, "finished initializing %s driver\n",
HCLGEVF_DRIVER_NAME);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 883130a9b48f..28288d7e3303 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -146,6 +146,7 @@ enum hclgevf_states {
HCLGEVF_STATE_REMOVING,
HCLGEVF_STATE_NIC_REGISTERED,
HCLGEVF_STATE_ROCE_REGISTERED,
+ HCLGEVF_STATE_SERVICE_INITED,
/* task states */
HCLGEVF_STATE_RST_SERVICE_SCHED,
HCLGEVF_STATE_RST_HANDLING,
--
2.33.0
This patch adjusts the string spaces of some parameters of tx bd info in
debugfs according to their maximum needs.
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index f2ade0446208..e54f96251fea 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -790,13 +790,13 @@ static int hns3_dbg_rx_bd_info(struct hns3_dbg_data *d, char *buf, int len)
}
static const struct hns3_dbg_item tx_bd_info_items[] = {
- { "BD_IDX", 5 },
- { "ADDRESS", 2 },
+ { "BD_IDX", 2 },
+ { "ADDRESS", 13 },
{ "VLAN_TAG", 2 },
{ "SIZE", 2 },
{ "T_CS_VLAN_TSO", 2 },
{ "OT_VLAN_TAG", 3 },
- { "TV", 2 },
+ { "TV", 5 },
{ "OLT_VLAN_LEN", 2 },
{ "PAYLEN_OL4CS", 2 },
{ "BD_FE_SC_VLD", 2 },
--
2.33.0
On Wed, Oct 27, 2021 at 08:11:43PM +0800, Guangbin Huang wrote:
The semantics are not too well defined here, the ethtool documentation
is not too clear. Here is how i interpret it.
> If a TP port is configured by follow steps:
> 1.ethtool -s ethx autoneg off speed 100 duplex full
So you turn general autoneg off
> 2.ethtool -A ethx rx on tx on
You did not use autoneg off here. Pause autoneg is separate to general
autoneg. So pause autoneg is still enabled at this point. That means
you should not directly configure the MAC with the pause
configuration, you only do that when pause autoneg is off. You can
consider this as setting how you want pause to be negotiated once
general autoneg is re-enabled.
> 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
So you reenable general autoneg. As part of that general autoneg,
pause will re-renegotiated, and it should you the preferences you set
in 2, that rx and tx pause can be used. What is actually used depends
on the link peer. The link_adjust callback from phylib tells you how
to program the MAC.
> 4.ethtool -s ethx autoneg off speed 100 duplex full
So you turn general autoneg off again. It is unclear how you are
supposed to program the MAC, but i guess most systems keep with the
result from the last autoneg.
Looking at your patch, there are suspicious calls to phy_syspend and
phy_resume. They don't look correct at all, and i'm not aware of any
other MAC driver doing this. Now, i know the behaviour is not well
defined here, but i'm not sure your interpretation is valid and how
others interpret it.
Andrew
On 2021/10/28 1:23, Andrew Lunn wrote:
> On Wed, Oct 27, 2021 at 08:11:43PM +0800, Guangbin Huang wrote:
>
> The semantics are not too well defined here, the ethtool documentation
> is not too clear. Here is how i interpret it.
>
>> If a TP port is configured by follow steps:
>> 1.ethtool -s ethx autoneg off speed 100 duplex full
>
> So you turn general autoneg off
>
>> 2.ethtool -A ethx rx on tx on
>
> You did not use autoneg off here. Pause autoneg is separate to general
> autoneg. So pause autoneg is still enabled at this point. That means
> you should not directly configure the MAC with the pause
> configuration, you only do that when pause autoneg is off. You can
> consider this as setting how you want pause to be negotiated once
> general autoneg is re-enabled.
>
>> 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
>
> So you reenable general autoneg. As part of that general autoneg,
> pause will re-renegotiated, and it should you the preferences you set
> in 2, that rx and tx pause can be used. What is actually used depends
> on the link peer. The link_adjust callback from phylib tells you how
> to program the MAC.
>
>> 4.ethtool -s ethx autoneg off speed 100 duplex full
>
> So you turn general autoneg off again. It is unclear how you are
> supposed to program the MAC, but i guess most systems keep with the
> result from the last autoneg.
>
> Looking at your patch, there are suspicious calls to phy_syspend and
> phy_resume. They don't look correct at all, and i'm not aware of any
> other MAC driver doing this. Now, i know the behaviour is not well
> defined here, but i'm not sure your interpretation is valid and how
> others interpret it.
>
> Andrew
> .
>
Hi Andrew, thanks very much for your guidance on how to use pause autoneg,
it confuses me before because PHY registers actually have no separate setting
bit of pause autoneg.
So, summarize what you mean:
1. If pause autoneg is on, driver should always use the autoneg result to program
the MAC. Eventhough general autoneg is off now and link state is no changed then
driver just needs to keep the last configuration for the MAC, if link state is
changed and phy goes down and up then driver needs to program the MAC according
to the autoneg result in the link_adjust callback.
2. If pause autoneg is off, driver should directly configure the MAC with tx pause
and rx pause. Eventhough general autoneg is on, driver should ignore the autoneg
result.
Do I understand right?
Guangbin
.
> Hi Andrew, thanks very much for your guidance on how to use pause autoneg,
> it confuses me before because PHY registers actually have no separate setting
> bit of pause autoneg.
>
> So, summarize what you mean:
> 1. If pause autoneg is on, driver should always use the autoneg result to program
> the MAC. Eventhough general autoneg is off now and link state is no changed then
> driver just needs to keep the last configuration for the MAC, if link state is
> changed and phy goes down and up then driver needs to program the MAC according
> to the autoneg result in the link_adjust callback.
> 2. If pause autoneg is off, driver should directly configure the MAC with tx pause
> and rx pause. Eventhough general autoneg is on, driver should ignore the autoneg
> result.
>
> Do I understand right?
Yes, that fits my understanding of ethtool, etc.
phylink tried to clear up some of these problems by fully implementing
the call within phylink. All the MAC driver needs to provide is a
method to configure the MAC pause settings. Take a look at
phylink_ethtool_set_pauseparam() and the commit messages related to
that.
Andrew
On 2021/10/28 20:30, Andrew Lunn wrote:
>> Hi Andrew, thanks very much for your guidance on how to use pause autoneg,
>> it confuses me before because PHY registers actually have no separate setting
>> bit of pause autoneg.
>>
>> So, summarize what you mean:
>> 1. If pause autoneg is on, driver should always use the autoneg result to program
>> the MAC. Eventhough general autoneg is off now and link state is no changed then
>> driver just needs to keep the last configuration for the MAC, if link state is
>> changed and phy goes down and up then driver needs to program the MAC according
>> to the autoneg result in the link_adjust callback.
>> 2. If pause autoneg is off, driver should directly configure the MAC with tx pause
>> and rx pause. Eventhough general autoneg is on, driver should ignore the autoneg
>> result.
>>
>> Do I understand right?
>
> Yes, that fits my understanding of ethtool, etc.
>
> phylink tried to clear up some of these problems by fully implementing
> the call within phylink. All the MAC driver needs to provide is a
> method to configure the MAC pause settings. Take a look at
> phylink_ethtool_set_pauseparam() and the commit messages related to
> that.
>
> Andrew
> .
>
Ok, thanks!