2022-03-10 14:10:55

by Aaron Tomlin

[permalink] [raw]
Subject: [PATCH v11 13/14] module: Move kdb module related code out of main kdb code

No functional change.

This patch migrates the kdb 'lsmod' command support out of main
kdb code into its own file under kernel/module. In addition to
the above, a minor style warning i.e. missing a blank line after
declarations, was resolved too. The new file was added to
MAINTAINERS. Finally we remove linux/module.h as it is entirely
redundant.

Signed-off-by: Aaron Tomlin <[email protected]>
---
MAINTAINERS | 1 +
include/linux/kdb.h | 1 +
kernel/debug/kdb/kdb_io.c | 1 -
kernel/debug/kdb/kdb_keyboard.c | 1 -
kernel/debug/kdb/kdb_main.c | 49 -----------------------------
kernel/debug/kdb/kdb_private.h | 4 ---
kernel/debug/kdb/kdb_support.c | 1 -
kernel/module/Makefile | 1 +
kernel/module/kdb.c | 56 +++++++++++++++++++++++++++++++++
kernel/module/main.c | 4 ---
10 files changed, 59 insertions(+), 60 deletions(-)
create mode 100644 kernel/module/kdb.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 195cf1ac2ee8..40c717f93c1a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10689,6 +10689,7 @@ F: drivers/tty/serial/kgdboc.c
F: include/linux/kdb.h
F: include/linux/kgdb.h
F: kernel/debug/
+F: kernel/module/kdb.c

KHADAS MCU MFD DRIVER
M: Neil Armstrong <[email protected]>
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index ea0f5e580fac..07dfb6a20a1c 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -222,5 +222,6 @@ enum {

extern int kdbgetintenv(const char *, int *);
extern int kdb_set(int, const char **);
+int kdb_lsmod(int argc, const char **argv);

#endif /* !_KDB_H */
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 6735ac36b718..67d3c48a1522 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -9,7 +9,6 @@
* Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved.
*/

-#include <linux/module.h>
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
diff --git a/kernel/debug/kdb/kdb_keyboard.c b/kernel/debug/kdb/kdb_keyboard.c
index f877a0a0d7cf..f87c750d3eb3 100644
--- a/kernel/debug/kdb/kdb_keyboard.c
+++ b/kernel/debug/kdb/kdb_keyboard.c
@@ -11,7 +11,6 @@
#include <linux/kdb.h>
#include <linux/keyboard.h>
#include <linux/ctype.h>
-#include <linux/module.h>
#include <linux/io.h>

/* Keyboard Controller Registers on normal PCs. */
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 0852a537dad4..f3a30cd5037f 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -26,7 +26,6 @@
#include <linux/utsname.h>
#include <linux/vmalloc.h>
#include <linux/atomic.h>
-#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mm.h>
#include <linux/init.h>
@@ -2004,54 +2003,6 @@ static int kdb_ef(int argc, const char **argv)
return 0;
}

-#if defined(CONFIG_MODULES)
-/*
- * kdb_lsmod - This function implements the 'lsmod' command. Lists
- * currently loaded kernel modules.
- * Mostly taken from userland lsmod.
- */
-static int kdb_lsmod(int argc, const char **argv)
-{
- struct module *mod;
-
- if (argc != 0)
- return KDB_ARGCOUNT;
-
- kdb_printf("Module Size modstruct Used by\n");
- list_for_each_entry(mod, kdb_modules, list) {
- if (mod->state == MODULE_STATE_UNFORMED)
- continue;
-
- kdb_printf("%-20s%8u 0x%px ", mod->name,
- mod->core_layout.size, (void *)mod);
-#ifdef CONFIG_MODULE_UNLOAD
- kdb_printf("%4d ", module_refcount(mod));
-#endif
- if (mod->state == MODULE_STATE_GOING)
- kdb_printf(" (Unloading)");
- else if (mod->state == MODULE_STATE_COMING)
- kdb_printf(" (Loading)");
- else
- kdb_printf(" (Live)");
- kdb_printf(" 0x%px", mod->core_layout.base);
-
-#ifdef CONFIG_MODULE_UNLOAD
- {
- struct module_use *use;
- kdb_printf(" [ ");
- list_for_each_entry(use, &mod->source_list,
- source_list)
- kdb_printf("%s ", use->target->name);
- kdb_printf("]\n");
- }
-#endif
- }
-
- return 0;
-}
-
-#endif /* CONFIG_MODULES */
-
/*
* kdb_env - This function implements the 'env' command. Display the
* current environment variables.
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 0d2f9feea0a4..1f8c519a5f81 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -226,10 +226,6 @@ extern void kdb_kbd_cleanup_state(void);
#define kdb_kbd_cleanup_state()
#endif /* ! CONFIG_KDB_KEYBOARD */

-#ifdef CONFIG_MODULES
-extern struct list_head *kdb_modules;
-#endif /* CONFIG_MODULES */
-
extern char kdb_prompt_str[];

#define KDB_WORD_SIZE ((int)sizeof(unsigned long))
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index df2bface866e..08229ffb6b5e 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -17,7 +17,6 @@
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/ptrace.h>
-#include <linux/module.h>
#include <linux/highmem.h>
#include <linux/hardirq.h>
#include <linux/delay.h>
diff --git a/kernel/module/Makefile b/kernel/module/Makefile
index cf8dcdc6b55f..88f5cdcdb067 100644
--- a/kernel/module/Makefile
+++ b/kernel/module/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_DEBUG_KMEMLEAK) += debug_kmemleak.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_PROC_FS) += procfs.o
obj-$(CONFIG_SYSFS) += sysfs.o
+obj-$(CONFIG_KGDB_KDB) += kdb.o
diff --git a/kernel/module/kdb.c b/kernel/module/kdb.c
new file mode 100644
index 000000000000..a446c699db0a
--- /dev/null
+++ b/kernel/module/kdb.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Module kdb support
+ *
+ * Copyright (C) 2010 Jason Wessel
+ */
+
+#include <linux/module.h>
+#include <linux/kdb.h>
+#include "internal.h"
+
+/*
+ * kdb_lsmod - This function implements the 'lsmod' command. Lists
+ * currently loaded kernel modules.
+ * Mostly taken from userland lsmod.
+ */
+int kdb_lsmod(int argc, const char **argv)
+{
+ struct module *mod;
+
+ if (argc != 0)
+ return KDB_ARGCOUNT;
+
+ kdb_printf("Module Size modstruct Used by\n");
+ list_for_each_entry(mod, &modules, list) {
+ if (mod->state == MODULE_STATE_UNFORMED)
+ continue;
+
+ kdb_printf("%-20s%8u 0x%px ", mod->name,
+ mod->core_layout.size, (void *)mod);
+#ifdef CONFIG_MODULE_UNLOAD
+ kdb_printf("%4d ", module_refcount(mod));
+#endif
+ if (mod->state == MODULE_STATE_GOING)
+ kdb_printf(" (Unloading)");
+ else if (mod->state == MODULE_STATE_COMING)
+ kdb_printf(" (Loading)");
+ else
+ kdb_printf(" (Live)");
+ kdb_printf(" 0x%px", mod->core_layout.base);
+
+#ifdef CONFIG_MODULE_UNLOAD
+ {
+ struct module_use *use;
+
+ kdb_printf(" [ ");
+ list_for_each_entry(use, &mod->source_list,
+ source_list)
+ kdb_printf("%s ", use->target->name);
+ kdb_printf("]\n");
+ }
+#endif
+ }
+
+ return 0;
+}
diff --git a/kernel/module/main.c b/kernel/module/main.c
index b8a59b5c3e3a..bcc4f7a82649 100644
--- a/kernel/module/main.c
+++ b/kernel/module/main.c
@@ -108,10 +108,6 @@ static void mod_update_bounds(struct module *mod)
__mod_update_bounds(mod->init_layout.base, mod->init_layout.size);
}

-#ifdef CONFIG_KGDB_KDB
-struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
-#endif /* CONFIG_KGDB_KDB */
-
static void module_assert_mutex_or_preempt(void)
{
#ifdef CONFIG_LOCKDEP
--
2.34.1


2022-03-11 21:46:42

by Daniel Thompson

[permalink] [raw]
Subject: Re: [PATCH v11 13/14] module: Move kdb module related code out of main kdb code

On Thu, Mar 10, 2022 at 10:26:24AM +0000, Aaron Tomlin wrote:
> No functional change.
>
> This patch migrates the kdb 'lsmod' command support out of main
> kdb code into its own file under kernel/module. In addition to
> the above, a minor style warning i.e. missing a blank line after
> declarations, was resolved too. The new file was added to
> MAINTAINERS. Finally we remove linux/module.h as it is entirely
> redundant.
>
> Signed-off-by: Aaron Tomlin <[email protected]>

Reviewed-by: Daniel Thompson <[email protected]>

Likewise w.r.t. to landing this via the modules tree, that's fine:
Acked-by: Daniel Thompson <[email protected]>


Daniel.

2022-03-11 22:41:35

by Luis Chamberlain

[permalink] [raw]
Subject: Re: [PATCH v11 13/14] module: Move kdb module related code out of main kdb code

On Fri, Mar 11, 2022 at 04:17:36PM +0000, Daniel Thompson wrote:
> On Thu, Mar 10, 2022 at 10:26:24AM +0000, Aaron Tomlin wrote:
> > No functional change.
> >
> > This patch migrates the kdb 'lsmod' command support out of main
> > kdb code into its own file under kernel/module. In addition to
> > the above, a minor style warning i.e. missing a blank line after
> > declarations, was resolved too. The new file was added to
> > MAINTAINERS. Finally we remove linux/module.h as it is entirely
> > redundant.
> >
> > Signed-off-by: Aaron Tomlin <[email protected]>
>
> Reviewed-by: Daniel Thompson <[email protected]>
>
> Likewise w.r.t. to landing this via the modules tree, that's fine:
> Acked-by: Daniel Thompson <[email protected]>

Groovy thanks, this won't go in for the upcoming merge window, it will
wait until the next kernel release as we have tons of testing to do
still.

Thanks!

Luis