Use rk gpio naming convention into reset-gpios of ov5695 camera
Signed-off-by: Tommaso Merciai <[email protected]>
Tested-by: Tommaso Merciai <[email protected]>
---
arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 0d05a1b098bc..07008d84434c 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -450,8 +450,8 @@ ov5695: ov5695@36 {
dvdd-supply = <&vcc1v5_dvp>;
dovdd-supply = <&vcc1v8_dvp>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+ reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
port {
ucam_out: endpoint {
--
2.25.1
Hi
On Thu, May 19, 2022 at 9:51 AM Tommaso Merciai
<[email protected]> wrote:
>
> Use rk gpio naming convention into reset-gpios of ov5695 camera
>
> Signed-off-by: Tommaso Merciai <[email protected]>
> Tested-by: Tommaso Merciai <[email protected]>
> ---
> arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> index 0d05a1b098bc..07008d84434c 100644
> --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> @@ -450,8 +450,8 @@ ov5695: ov5695@36 {
> dvdd-supply = <&vcc1v5_dvp>;
> dovdd-supply = <&vcc1v8_dvp>;
> pinctrl-names = "default";
> - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
> + reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
>
Reviewed-by: Michael Trimarchi <[email protected]>
> port {
> ucam_out: endpoint {
> --
> 2.25.1
>
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
http://www.amarulasolutions.com