On 03.06.2022 19:28:43, Vincent Mailhol wrote:
> In the next patches, the software/virtual drivers (slcan, v(x)can)
> will depend on drivers/net/can/dev/skb.o.
>
> This patch changes the scope of the can-dev module to include the
> above mentioned drivers.
>
> To do so, we reuse the menu "CAN Device Drivers" and turn it into a
> configmenu using the config symbol CAN_DEV (which we released in
> previous patch). Also, add a description to this new CAN_DEV
> menuconfig.
>
> The symbol CAN_DEV now only triggers the build of skb.o. For this
> reasons, all the macros from linux/module.h are deported from
> drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c.
>
> Finally, drivers/net/can/dev/Makefile is adjusted accordingly.
>
> Suggested-by: Oliver Hartkopp <[email protected]>
> Signed-off-by: Vincent Mailhol <[email protected]>
> ---
> drivers/net/can/Kconfig | 29 ++++++++++++++++++++++++++---
> drivers/net/can/dev/Makefile | 16 +++++++++-------
> drivers/net/can/dev/dev.c | 9 +--------
> drivers/net/can/dev/skb.c | 7 +++++++
> 4 files changed, 43 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile
> index 5b4c813c6222..919f87e36eed 100644
> --- a/drivers/net/can/dev/Makefile
> +++ b/drivers/net/can/dev/Makefile
> @@ -1,9 +1,11 @@
> # SPDX-License-Identifier: GPL-2.0
>
> -obj-$(CONFIG_CAN_NETLINK) += can-dev.o
^^^^^^^^^^^^^^^^^^^^^
Nitpick: I think you can directly use "y" here.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |