This patch series cleanup unused code by eliminating it at compile time
and then enable usage of all 256 PCI buses per every PCI domain as
currently PCI bus numbers have to be unique across all PCI domains.
So first bus number of each PCI domain would be zero and not the bus
number of the previous domain plus one. As such bus assignment changes
BDF address of every PCI device on multi-domain system, this new
"feature" is configurable by config option to prevent regressions.
Tested on Freescale P2020 board. Before this patch lspci reports:
8000:00:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
8000:01:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02)
9000:02:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
9000:03:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
a000:04:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
a000:05:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
With these patches and enabled config option it reports:
8000:00:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
8000:01:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02)
9000:00:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
9000:01:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
a000:00:00.0 PCI bridge: Freescale Semiconductor Inc P2020E (rev 21)
a000:01:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
Now every PCIe Root Port is on bus zero and theoretically with enough
multiport PCIe switches connected to every PCIe Root Port, it should be
possible to have 256 PCI buses on every PCIe controller (as each is in
own PCI domain) and therefore connect more PCIe cards as without these
patches.
Pali Rohár (5):
powerpc/pci: Hide pci_device_from_OF_node() for non-powermac code
powerpc/pci: Make pcibios_make_OF_bus_map() static
powerpc/pci: Hide pci_create_OF_bus_map() for non-chrp code
powerpc/pci: Disable filling pci-OF-bus-map for non-chrp/powermac
powerpc/pci: Add config option for using all 256 PCI buses
arch/powerpc/Kconfig | 11 +++++++++++
arch/powerpc/include/asm/pci-bridge.h | 4 ++++
arch/powerpc/kernel/pci_32.c | 27 +++++++++++++++++++++------
arch/powerpc/kernel/pci_64.c | 2 ++
4 files changed, 38 insertions(+), 6 deletions(-)
--
2.20.1
By default on PPC32 are PCI bus numbers unique across all PCI domains.
So system could have only 256 PCI buses independently of available
PCI domains.
This is due to filling DT property pci-OF-bus-map which does not reflect
multi-domain setup.
On all powerpc platforms except chrp and powermac there is no DT property
pci-OF-bus-map anymore and therefore it is possible on non-chrp/powermac
platforms to avoid this limitation of maximal number of 256 PCI buses in
system even on multi-domain setup.
But avoiding this limitation would mean that all PCI and PCIe devices would
be present on completely different BDF addresses as every PCI domain starts
numbering PCI bueses from zero (instead of the last bus number of previous
enumerated PCI domain). Such change could break existing software which
expects fixed PCI bus numbers.
So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
enables this change. By default it is disabled. It cause that initial value
of hose->first_busno is zero.
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/Kconfig | 11 +++++++++++
arch/powerpc/kernel/pci_32.c | 6 ++++++
2 files changed, 17 insertions(+)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index be68c1f02b79..f66084bc1dfe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -370,6 +370,17 @@ config PPC_DCR
depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
default y
+config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
+ depends on PPC32
+ depends on !PPC_PMAC && !PPC_CHRP
+ bool "Assign PCI bus numbers from zero individually for each PCI domain"
+ help
+ By default on PPC32 were PCI bus numbers unique across all PCI domains.
+ So system could have only 256 PCI buses independently of available
+ PCI domains. When this option is enabled then PCI bus numbers are
+ PCI domain dependent and each PCI controller on own domain can have
+ 256 PCI buses, like it is on other Linux architectures.
+
config PPC_OF_PLATFORM_PCI
bool
depends on PCI
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 2f7284b68f06..433965bf37b4 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -239,7 +239,9 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose)
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
+#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
int next_busno = 0;
+#endif
printk(KERN_INFO "PCI: Probing PCI hardware\n");
@@ -248,13 +250,17 @@ static int __init pcibios_init(void)
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
if (pci_assign_all_buses)
hose->first_busno = next_busno;
+#endif
hose->last_busno = 0xff;
pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus);
+#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
+#endif
}
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
--
2.20.1
Creating or filling pci-OF-bus-map property in the device-tree is
deprecated since May 2006 [1] and was used only in old platforms like
PowerMac.
Currently kernel code handles it only for chrp and powermac code. So
completely disable filling pci-OF-bus-map property for non-chrp and
non-powermac platforms.
[1] - https://lore.kernel.org/linuxppc-dev/[email protected]/
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/kernel/pci_32.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3291af89cea4..2f7284b68f06 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -37,15 +37,12 @@ EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(pci_dram_offset);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-static u8* pci_to_OF_bus_map;
/* By default, we don't re-assign bus numbers. We do this only on
* some pmacs
*/
static int pci_assign_all_buses;
-static int pci_bus_count;
-
/* This will remain NULL for now, until isa-bridge.c is made common
* to both 32-bit and 64-bit.
*/
@@ -65,6 +62,11 @@ fixup_cpc710_pci64(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
+
+static u8* pci_to_OF_bus_map;
+static int pci_bus_count;
+
/*
* Functions below are used on OpenFirmware machines.
*/
@@ -221,6 +223,8 @@ pci_create_OF_bus_map(void)
}
#endif
+#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP) */
+
void pcibios_setup_phb_io_space(struct pci_controller *hose)
{
unsigned long io_offset;
@@ -252,6 +256,8 @@ static int __init pcibios_init(void)
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
}
+
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
pci_bus_count = next_busno;
/* OpenFirmware based machines need a map of OF bus
@@ -260,6 +266,7 @@ static int __init pcibios_init(void)
*/
if (pci_assign_all_buses)
pcibios_make_OF_bus_map();
+#endif
/* Call common code to handle resource allocation */
pcibios_resource_survey();
--
2.20.1
Function pci_device_from_OF_node() is used only in powermac code.
So hide it from all other platforms as it is unsed.
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/include/asm/pci-bridge.h | 2 ++
arch/powerpc/kernel/pci_32.c | 2 ++
arch/powerpc/kernel/pci_64.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index c85f901227c9..98156932a1f5 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -170,8 +170,10 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
return bus->sysdata;
}
+#ifdef CONFIG_PPC_PMAC
extern int pci_device_from_OF_node(struct device_node *node,
u8 *bus, u8 *devfn);
+#endif
#ifndef CONFIG_PPC64
extern void pci_create_OF_bus_map(void);
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 5a174936c9a0..c3b91fb62a71 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -154,6 +154,7 @@ pcibios_make_OF_bus_map(void)
}
+#ifdef CONFIG_PPC_PMAC
/*
* Returns the PCI device matching a given OF node
*/
@@ -193,6 +194,7 @@ int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
return -ENODEV;
}
EXPORT_SYMBOL(pci_device_from_OF_node);
+#endif
/* We create the "pci-OF-bus-map" property now so it appears in the
* /proc device tree
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 19b03ddf5631..0c7cfb9fab04 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -286,6 +286,7 @@ int pcibus_to_node(struct pci_bus *bus)
EXPORT_SYMBOL(pcibus_to_node);
#endif
+#ifdef CONFIG_PPC_PMAC
int pci_device_from_OF_node(struct device_node *np, u8 *bus, u8 *devfn)
{
if (!PCI_DN(np))
@@ -294,3 +295,4 @@ int pci_device_from_OF_node(struct device_node *np, u8 *bus, u8 *devfn)
*devfn = PCI_DN(np)->devfn;
return 0;
}
+#endif
--
2.20.1
Function pcibios_make_OF_bus_map() is used only in pci_32.c file.
So make it static and do not export out of pci_32.o unit.
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/kernel/pci_32.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index c3b91fb62a71..df981294df29 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -36,8 +36,6 @@ int pcibios_assign_bus_offset = 1;
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(pci_dram_offset);
-void __init pcibios_make_OF_bus_map(void);
-
static void fixup_cpc710_pci64(struct pci_dev* dev);
static u8* pci_to_OF_bus_map;
@@ -108,7 +106,7 @@ make_one_node_map(struct device_node* node, u8 pci_bus)
}
}
-void __init
+static void __init
pcibios_make_OF_bus_map(void)
{
int i;
--
2.20.1
Function pci_create_OF_bus_map() is used only in chrp code.
So hide it from all other platforms as it is unsed.
Signed-off-by: Pali Rohár <[email protected]>
---
arch/powerpc/include/asm/pci-bridge.h | 2 ++
arch/powerpc/kernel/pci_32.c | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 98156932a1f5..e18c95f4e1d4 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -176,7 +176,9 @@ extern int pci_device_from_OF_node(struct device_node *node,
#endif
#ifndef CONFIG_PPC64
+#ifdef CONFIG_PPC_CHRP
extern void pci_create_OF_bus_map(void);
+#endif
#else /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index df981294df29..3291af89cea4 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -194,6 +194,7 @@ int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
EXPORT_SYMBOL(pci_device_from_OF_node);
#endif
+#ifdef CONFIG_PPC_CHRP
/* We create the "pci-OF-bus-map" property now so it appears in the
* /proc device tree
*/
@@ -218,6 +219,7 @@ pci_create_OF_bus_map(void)
of_node_put(dn);
}
}
+#endif
void pcibios_setup_phb_io_space(struct pci_controller *hose)
{
--
2.20.1
On Wed, Jul 06, 2022 at 12:43:04PM +0200, Pali Roh?r wrote:
> Function pci_device_from_OF_node() is used only in powermac code.
> So hide it from all other platforms as it is unsed.
s/unsed/unused/ (same typo in 3/5 patch)
These are for the powerpc folks, so I'm just kibbitzing here.
> Signed-off-by: Pali Roh?r <[email protected]>
> ---
> arch/powerpc/include/asm/pci-bridge.h | 2 ++
> arch/powerpc/kernel/pci_32.c | 2 ++
> arch/powerpc/kernel/pci_64.c | 2 ++
> 3 files changed, 6 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index c85f901227c9..98156932a1f5 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -170,8 +170,10 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
> return bus->sysdata;
> }
>
> +#ifdef CONFIG_PPC_PMAC
> extern int pci_device_from_OF_node(struct device_node *node,
> u8 *bus, u8 *devfn);
> +#endif
> #ifndef CONFIG_PPC64
>
> extern void pci_create_OF_bus_map(void);
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index 5a174936c9a0..c3b91fb62a71 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -154,6 +154,7 @@ pcibios_make_OF_bus_map(void)
> }
>
>
> +#ifdef CONFIG_PPC_PMAC
> /*
> * Returns the PCI device matching a given OF node
> */
> @@ -193,6 +194,7 @@ int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
> return -ENODEV;
> }
> EXPORT_SYMBOL(pci_device_from_OF_node);
> +#endif
>
> /* We create the "pci-OF-bus-map" property now so it appears in the
> * /proc device tree
> diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
> index 19b03ddf5631..0c7cfb9fab04 100644
> --- a/arch/powerpc/kernel/pci_64.c
> +++ b/arch/powerpc/kernel/pci_64.c
> @@ -286,6 +286,7 @@ int pcibus_to_node(struct pci_bus *bus)
> EXPORT_SYMBOL(pcibus_to_node);
> #endif
>
> +#ifdef CONFIG_PPC_PMAC
> int pci_device_from_OF_node(struct device_node *np, u8 *bus, u8 *devfn)
> {
> if (!PCI_DN(np))
> @@ -294,3 +295,4 @@ int pci_device_from_OF_node(struct device_node *np, u8 *bus, u8 *devfn)
> *devfn = PCI_DN(np)->devfn;
> return 0;
> }
> +#endif
> --
> 2.20.1
>
On Wednesday 06 July 2022 12:43:08 Pali Rohár wrote:
> By default on PPC32 are PCI bus numbers unique across all PCI domains.
> So system could have only 256 PCI buses independently of available
> PCI domains.
>
> This is due to filling DT property pci-OF-bus-map which does not reflect
> multi-domain setup.
>
> On all powerpc platforms except chrp and powermac there is no DT property
> pci-OF-bus-map anymore and therefore it is possible on non-chrp/powermac
> platforms to avoid this limitation of maximal number of 256 PCI buses in
> system even on multi-domain setup.
>
> But avoiding this limitation would mean that all PCI and PCIe devices would
> be present on completely different BDF addresses as every PCI domain starts
> numbering PCI bueses from zero (instead of the last bus number of previous
> enumerated PCI domain). Such change could break existing software which
> expects fixed PCI bus numbers.
>
> So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
> enables this change. By default it is disabled. It cause that initial value
> of hose->first_busno is zero.
>
> Signed-off-by: Pali Rohár <[email protected]>
> ---
> arch/powerpc/Kconfig | 11 +++++++++++
> arch/powerpc/kernel/pci_32.c | 6 ++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index be68c1f02b79..f66084bc1dfe 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -370,6 +370,17 @@ config PPC_DCR
> depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
> default y
>
> +config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> + depends on PPC32
> + depends on !PPC_PMAC && !PPC_CHRP
> + bool "Assign PCI bus numbers from zero individually for each PCI domain"
> + help
> + By default on PPC32 were PCI bus numbers unique across all PCI domains.
> + So system could have only 256 PCI buses independently of available
> + PCI domains. When this option is enabled then PCI bus numbers are
> + PCI domain dependent and each PCI controller on own domain can have
> + 256 PCI buses, like it is on other Linux architectures.
> +
What do you think, would it be possible to set default value of this
option to enabled?
> config PPC_OF_PLATFORM_PCI
> bool
> depends on PCI
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index 2f7284b68f06..433965bf37b4 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -239,7 +239,9 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose)
> static int __init pcibios_init(void)
> {
> struct pci_controller *hose, *tmp;
> +#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> int next_busno = 0;
> +#endif
>
> printk(KERN_INFO "PCI: Probing PCI hardware\n");
>
> @@ -248,13 +250,17 @@ static int __init pcibios_init(void)
>
> /* Scan all of the recorded PCI controllers. */
> list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
> +#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> if (pci_assign_all_buses)
> hose->first_busno = next_busno;
> +#endif
> hose->last_busno = 0xff;
> pcibios_scan_phb(hose);
> pci_bus_add_devices(hose->bus);
> +#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> if (pci_assign_all_buses || next_busno <= hose->last_busno)
> next_busno = hose->last_busno + pcibios_assign_bus_offset;
> +#endif
> }
>
> #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
> --
> 2.20.1
>
Pali Rohár <[email protected]> writes:
> On Wednesday 06 July 2022 12:43:08 Pali Rohár wrote:
>> By default on PPC32 are PCI bus numbers unique across all PCI domains.
>> So system could have only 256 PCI buses independently of available
>> PCI domains.
>>
>> This is due to filling DT property pci-OF-bus-map which does not reflect
>> multi-domain setup.
>>
>> On all powerpc platforms except chrp and powermac there is no DT property
>> pci-OF-bus-map anymore and therefore it is possible on non-chrp/powermac
>> platforms to avoid this limitation of maximal number of 256 PCI buses in
>> system even on multi-domain setup.
>>
>> But avoiding this limitation would mean that all PCI and PCIe devices would
>> be present on completely different BDF addresses as every PCI domain starts
>> numbering PCI bueses from zero (instead of the last bus number of previous
>> enumerated PCI domain). Such change could break existing software which
>> expects fixed PCI bus numbers.
>>
>> So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
>> enables this change. By default it is disabled. It cause that initial value
>> of hose->first_busno is zero.
>>
>> Signed-off-by: Pali Rohár <[email protected]>
>> ---
>> arch/powerpc/Kconfig | 11 +++++++++++
>> arch/powerpc/kernel/pci_32.c | 6 ++++++
>> 2 files changed, 17 insertions(+)
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index be68c1f02b79..f66084bc1dfe 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -370,6 +370,17 @@ config PPC_DCR
>> depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
>> default y
>>
>> +config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
>> + depends on PPC32
>> + depends on !PPC_PMAC && !PPC_CHRP
>> + bool "Assign PCI bus numbers from zero individually for each PCI domain"
>> + help
>> + By default on PPC32 were PCI bus numbers unique across all PCI domains.
>> + So system could have only 256 PCI buses independently of available
>> + PCI domains. When this option is enabled then PCI bus numbers are
>> + PCI domain dependent and each PCI controller on own domain can have
>> + 256 PCI buses, like it is on other Linux architectures.
>> +
>
> What do you think, would it be possible to set default value of this
> option to enabled?
My preference would be to not have the option at all, just make it the
default behaviour. Every new CONFIG option adds more combinations that
need testing, or more likely don't get well tested.
But I don't have a good feel for what could break if we turn it on, so
honestly I don't really know.
Also I do most of my 32-bit testing on pmacs, which are not affected by
the change.
So I'll probably take the series as-is, and then we can do some more
widespread testing and possibly flip the default to enabled, and then
maybe remove the option entirely in future.
cheers
On Tuesday 26 July 2022 21:02:22 Michael Ellerman wrote:
> Pali Rohár <[email protected]> writes:
> > On Wednesday 06 July 2022 12:43:08 Pali Rohár wrote:
> >> By default on PPC32 are PCI bus numbers unique across all PCI domains.
> >> So system could have only 256 PCI buses independently of available
> >> PCI domains.
> >>
> >> This is due to filling DT property pci-OF-bus-map which does not reflect
> >> multi-domain setup.
> >>
> >> On all powerpc platforms except chrp and powermac there is no DT property
> >> pci-OF-bus-map anymore and therefore it is possible on non-chrp/powermac
> >> platforms to avoid this limitation of maximal number of 256 PCI buses in
> >> system even on multi-domain setup.
> >>
> >> But avoiding this limitation would mean that all PCI and PCIe devices would
> >> be present on completely different BDF addresses as every PCI domain starts
> >> numbering PCI bueses from zero (instead of the last bus number of previous
> >> enumerated PCI domain). Such change could break existing software which
> >> expects fixed PCI bus numbers.
> >>
> >> So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
> >> enables this change. By default it is disabled. It cause that initial value
> >> of hose->first_busno is zero.
> >>
> >> Signed-off-by: Pali Rohár <[email protected]>
> >> ---
> >> arch/powerpc/Kconfig | 11 +++++++++++
> >> arch/powerpc/kernel/pci_32.c | 6 ++++++
> >> 2 files changed, 17 insertions(+)
> >>
> >> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> >> index be68c1f02b79..f66084bc1dfe 100644
> >> --- a/arch/powerpc/Kconfig
> >> +++ b/arch/powerpc/Kconfig
> >> @@ -370,6 +370,17 @@ config PPC_DCR
> >> depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
> >> default y
> >>
> >> +config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> >> + depends on PPC32
> >> + depends on !PPC_PMAC && !PPC_CHRP
> >> + bool "Assign PCI bus numbers from zero individually for each PCI domain"
> >> + help
> >> + By default on PPC32 were PCI bus numbers unique across all PCI domains.
> >> + So system could have only 256 PCI buses independently of available
> >> + PCI domains. When this option is enabled then PCI bus numbers are
> >> + PCI domain dependent and each PCI controller on own domain can have
> >> + 256 PCI buses, like it is on other Linux architectures.
> >> +
> >
> > What do you think, would it be possible to set default value of this
> > option to enabled?
>
> My preference would be to not have the option at all, just make it the
> default behaviour. Every new CONFIG option adds more combinations that
> need testing, or more likely don't get well tested.
>
> But I don't have a good feel for what could break if we turn it on, so
> honestly I don't really know.
>
> Also I do most of my 32-bit testing on pmacs, which are not affected by
> the change.
It is because this change is incompatible with deprecated pci-OF-bus-map
which pmac uses. I do not have any pmac box for testing or development,
so I let this part as is.
If one day pci-OF-bus-map would be possible to disable on pmac then this
pci bus number change can be enabled also for pmac.
> So I'll probably take the series as-is, and then we can do some more
> widespread testing and possibly flip the default to enabled, and then
> maybe remove the option entirely in future.
>
> cheers
I have tested it on P2020 board with 3 PCIe devices, each on own bus
where each bus is connected to different PCIe controller / domain and it
works correctly. Every PCIe device is on bus 1 bus but on different
domains.
On Tuesday 26 July 2022 13:10:01 Pali Rohár wrote:
> On Tuesday 26 July 2022 21:02:22 Michael Ellerman wrote:
> > Pali Rohár <[email protected]> writes:
> > > On Wednesday 06 July 2022 12:43:08 Pali Rohár wrote:
> > >> By default on PPC32 are PCI bus numbers unique across all PCI domains.
> > >> So system could have only 256 PCI buses independently of available
> > >> PCI domains.
> > >>
> > >> This is due to filling DT property pci-OF-bus-map which does not reflect
> > >> multi-domain setup.
> > >>
> > >> On all powerpc platforms except chrp and powermac there is no DT property
> > >> pci-OF-bus-map anymore and therefore it is possible on non-chrp/powermac
> > >> platforms to avoid this limitation of maximal number of 256 PCI buses in
> > >> system even on multi-domain setup.
> > >>
> > >> But avoiding this limitation would mean that all PCI and PCIe devices would
> > >> be present on completely different BDF addresses as every PCI domain starts
> > >> numbering PCI bueses from zero (instead of the last bus number of previous
> > >> enumerated PCI domain). Such change could break existing software which
> > >> expects fixed PCI bus numbers.
> > >>
> > >> So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
> > >> enables this change. By default it is disabled. It cause that initial value
> > >> of hose->first_busno is zero.
> > >>
> > >> Signed-off-by: Pali Rohár <[email protected]>
> > >> ---
> > >> arch/powerpc/Kconfig | 11 +++++++++++
> > >> arch/powerpc/kernel/pci_32.c | 6 ++++++
> > >> 2 files changed, 17 insertions(+)
> > >>
> > >> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > >> index be68c1f02b79..f66084bc1dfe 100644
> > >> --- a/arch/powerpc/Kconfig
> > >> +++ b/arch/powerpc/Kconfig
> > >> @@ -370,6 +370,17 @@ config PPC_DCR
> > >> depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
> > >> default y
> > >>
> > >> +config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
> > >> + depends on PPC32
> > >> + depends on !PPC_PMAC && !PPC_CHRP
> > >> + bool "Assign PCI bus numbers from zero individually for each PCI domain"
> > >> + help
> > >> + By default on PPC32 were PCI bus numbers unique across all PCI domains.
> > >> + So system could have only 256 PCI buses independently of available
> > >> + PCI domains. When this option is enabled then PCI bus numbers are
> > >> + PCI domain dependent and each PCI controller on own domain can have
> > >> + 256 PCI buses, like it is on other Linux architectures.
> > >> +
> > >
> > > What do you think, would it be possible to set default value of this
> > > option to enabled?
> >
> > My preference would be to not have the option at all, just make it the
> > default behaviour. Every new CONFIG option adds more combinations that
> > need testing, or more likely don't get well tested.
> >
> > But I don't have a good feel for what could break if we turn it on, so
> > honestly I don't really know.
> >
> > Also I do most of my 32-bit testing on pmacs, which are not affected by
> > the change.
>
> It is because this change is incompatible with deprecated pci-OF-bus-map
> which pmac uses. I do not have any pmac box for testing or development,
> so I let this part as is.
>
> If one day pci-OF-bus-map would be possible to disable on pmac then this
> pci bus number change can be enabled also for pmac.
Hello! I have created this patch which allows to disable deprecated
pci-OF-bus-map on powermac and allow to enable this new config option
PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT also on powermac.
So you can test this option too on your powermac boxes.
I'm really not sure if that pci-OF-bus-map is required and for which
platforms or software...
Patch for allowing to disable pci-OF-bus-map is here:
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/
> > So I'll probably take the series as-is, and then we can do some more
> > widespread testing and possibly flip the default to enabled, and then
> > maybe remove the option entirely in future.
> >
> > cheers
>
> I have tested it on P2020 board with 3 PCIe devices, each on own bus
> where each bus is connected to different PCIe controller / domain and it
> works correctly. Every PCIe device is on bus 1 bus but on different
> domains.