Both pressure and temperature are 24-bit long. Use proper accessors
instead of overlapping readings.
Signed-off-by: Andy Shevchenko <[email protected]>
---
drivers/iio/pressure/dlhl60d.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
index 5f6bb3603a8b..f0b0d198c6d4 100644
--- a/drivers/iio/pressure/dlhl60d.c
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st,
if (ret)
return ret;
- *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
- *temperature = get_unaligned_be32(&st->rx_buf[3]) &
- GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
+ *pressure = get_unaligned_be24(&st->rx_buf[1]);
+ *temperature = get_unaligned_be24(&st->rx_buf[4]);
return 0;
}
--
2.35.1
On Tue, 26 Jul 2022 17:20:48 +0300
Andy Shevchenko <[email protected]> wrote:
> Both pressure and temperature are 24-bit long. Use proper accessors
> instead of overlapping readings.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
Looks correct to me, but it made me scratch my head just enough that I'd
like Tomislav to take a look if possible. So give me a poke if this
hasn't progressed in a few weeks time.
Thanks,
Jonathan
> ---
> drivers/iio/pressure/dlhl60d.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
> index 5f6bb3603a8b..f0b0d198c6d4 100644
> --- a/drivers/iio/pressure/dlhl60d.c
> +++ b/drivers/iio/pressure/dlhl60d.c
> @@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st,
> if (ret)
> return ret;
>
> - *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
> - *temperature = get_unaligned_be32(&st->rx_buf[3]) &
> - GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
> + *pressure = get_unaligned_be24(&st->rx_buf[1]);
> + *temperature = get_unaligned_be24(&st->rx_buf[4]);
>
> return 0;
> }
On Sun, 31 Jul 2022 13:33:57 +0100
Jonathan Cameron <[email protected]> wrote:
> On Tue, 26 Jul 2022 17:20:48 +0300
> Andy Shevchenko <[email protected]> wrote:
>
> > Both pressure and temperature are 24-bit long. Use proper accessors
> > instead of overlapping readings.
> >
> > Signed-off-by: Andy Shevchenko <[email protected]>
> Looks correct to me, but it made me scratch my head just enough that I'd
> like Tomislav to take a look if possible. So give me a poke if this
> hasn't progressed in a few weeks time.
Long enough.
Applied to the togreg branch of iio.git and pushed out as testing.
Thanks,
Jonathan
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/pressure/dlhl60d.c | 5 ++---
> > 1 file changed, 2 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
> > index 5f6bb3603a8b..f0b0d198c6d4 100644
> > --- a/drivers/iio/pressure/dlhl60d.c
> > +++ b/drivers/iio/pressure/dlhl60d.c
> > @@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st,
> > if (ret)
> > return ret;
> >
> > - *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
> > - *temperature = get_unaligned_be32(&st->rx_buf[3]) &
> > - GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
> > + *pressure = get_unaligned_be24(&st->rx_buf[1]);
> > + *temperature = get_unaligned_be24(&st->rx_buf[4]);
> >
> > return 0;
> > }
>