LinuxLists.cc - [PATCH v1] usb: typec: tcpm: Return ENOTSUPP for power supply prop writes

2022-08-16 07:26:10

Subject: [PATCH v1] usb: typec: tcpm: Return ENOTSUPP for power supply prop writes

When the port does not support USB PD, prevent transition to PD
only states when power supply property is written. In this case,
TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
which should not be the case given that the port is not pd_capable.

[ 84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
[ 84.308335] Setting usb_comm capable false
[ 84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
[ 84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]

Signed-off-by: Badhri Jagan Sridharan <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index ea5a917c51b1..904c7b4ce2f0 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -6320,6 +6320,13 @@ static int tcpm_psy_set_prop(struct power_supply *psy,
struct tcpm_port *port = power_supply_get_drvdata(psy);
int ret;

+ /*
+ * All the properties below are related to USB PD. The check needs to be
+ * property specific when a non-pd related property is added.
+ */
+ if (!port->pd_supported)
+ return -EOPNOTSUPP;
+
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = tcpm_psy_set_online(port, val);
--
2.37.1.595.g718a3a8f04-goog

2022-08-16 07:41:17

by Guenter Roeck

[permalink] [raw]

Subject: Re: [PATCH v1] usb: typec: tcpm: Return ENOTSUPP for power supply prop writes

On Mon, Aug 15, 2022 at 08:33:55PM -0700, Badhri Jagan Sridharan wrote:
> When the port does not support USB PD, prevent transition to PD
> only states when power supply property is written. In this case,
> TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
> which should not be the case given that the port is not pd_capable.
>
> [ 84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
> [ 84.308335] Setting usb_comm capable false
> [ 84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
> [ 84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
>
> Signed-off-by: Badhri Jagan Sridharan <[email protected]>

Reviewed-by: Guenter Roeck <[email protected]>

> ---
> drivers/usb/typec/tcpm/tcpm.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index ea5a917c51b1..904c7b4ce2f0 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -6320,6 +6320,13 @@ static int tcpm_psy_set_prop(struct power_supply *psy,
> struct tcpm_port *port = power_supply_get_drvdata(psy);
> int ret;
>
> + /*
> + * All the properties below are related to USB PD. The check needs to be
> + * property specific when a non-pd related property is added.
> + */
> + if (!port->pd_supported)
> + return -EOPNOTSUPP;
> +
> switch (psp) {
> case POWER_SUPPLY_PROP_ONLINE:
> ret = tcpm_psy_set_online(port, val);
> --
> 2.37.1.595.g718a3a8f04-goog
>

2022-08-16 07:57:32

by Greg Kroah-Hartman

[permalink] [raw]