This issue was detected after adding regmap register access validation.
KSZ9893 compatible chips do not have "Output Clock Control Register
0x0103". So, avoid writing to it.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
---
drivers/net/dsa/microchip/ksz9477.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index f60ceaf25a66c..fb9de6b447b12 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -193,6 +193,11 @@ int ksz9477_reset_switch(struct ksz_device *dev)
ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+ /* KSZ9893 compatible chips do not support refclk configuration */
+ if (dev->chip_id == KSZ9893_CHIP_ID ||
+ dev->chip_id == KSZ8563_CHIP_ID)
+ return 0;
+
data8 = SW_ENABLE_REFCLKO;
if (dev->synclko_disable)
data8 = 0;
--
2.30.2