2022-09-13 16:31:26

by Sergiu Moga

Subject: [PATCH v3 02/14] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1

Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.

Signed-off-by: Sergiu Moga <[email protected]>
---


v1 -> v2:
- Nothing, this patch was not here before


v2 -> v3:
- Nothing, previously this was [PATCH 4]



arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7ade9979e1c6..67bce8d60908 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -258,7 +258,7 @@ &flx5 {
status = "okay";

uart1: serial@200 {
- compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
--
2.34.1

2022-09-16 08:21:08

by Claudiu Beznea

Subject: Re: [PATCH v3 02/14] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1

On 13.09.2022 17:21, Sergiu Moga wrote:
> Maintain consistency among the compatibles of the serial nodes of
> sam9x60ek and highlight the incremental characteristic of its serial
> IP's by making sure that all serial nodes contain both the sam9x60
> and sam9260 usart/dbgu compatibles.
>
> Signed-off-by: Sergiu Moga <[email protected]>

Applied to at91-dt, thanks!

> ---
>
>
> v1 -> v2:
> - Nothing, this patch was not here before
>
>
> v2 -> v3:
> - Nothing, previously this was [PATCH 4]
>
>
>
> arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7ade9979e1c6..67bce8d60908 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -258,7 +258,7 @@ &flx5 {
> status = "okay";
>
> uart1: serial@200 {
> - compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> dmas = <&dma0