2022-10-12 02:55:55

by Kefeng Wang

Subject: [PATCH v2] clk: at91: fix the build with binutils 2.27

There is an issue when build with older versions of binutils 2.27.0,

arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'

Use UL() macro to fix the issue in assembly file.

Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <[email protected]>
---
v2: use linux/bits.h instead of vdso/bits.h

include/linux/clk/at91_pmc.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 3484309b59bf..7af499bdbecb 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -12,6 +12,8 @@
#ifndef AT91_PMC_H
#define AT91_PMC_H

+#include <linux/bits.h>
+
#define AT91_PMC_V1 (1) /* PMC version 1 */
#define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */

@@ -45,8 +47,8 @@
#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */

#define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */
-#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */
-#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */
+#define AT91_PMC_PLL_ACR_DEFAULT_UPLL UL(0x12020010) /* Default PLL ACR value for UPLL */
+#define AT91_PMC_PLL_ACR_DEFAULT_PLLA UL(0x00020010) /* Default PLL ACR value for PLLA */
#define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */
#define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */

--
2.35.3

2022-10-12 03:00:20

by Kefeng Wang

Subject: Re: [PATCH v2] clk: at91: fix the build with binutils 2.27

On 2022/10/12 11:06, Kefeng Wang wrote:
> There is an issue when build with older versions of binutils 2.27.0,
>
> arch/arm/mach-at91/pm_suspend.S: Assembler messages:
> arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
>
> Use UL() macro to fix the issue in assembly file.
>
> Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
> Signed-off-by: Kefeng Wang <[email protected]>
> ---
> v2: use linux/bits.h instead of vdso/bits.h
+ Stephen
>
> include/linux/clk/at91_pmc.h | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
> index 3484309b59bf..7af499bdbecb 100644
> --- a/include/linux/clk/at91_pmc.h
> +++ b/include/linux/clk/at91_pmc.h
> @@ -12,6 +12,8 @@
> #ifndef AT91_PMC_H
> #define AT91_PMC_H
>
> +#include <linux/bits.h>
> +
> #define AT91_PMC_V1 (1) /* PMC version 1 */
> #define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */
>
> @@ -45,8 +47,8 @@
> #define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
>
> #define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */
> -#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */
> -#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */
> +#define AT91_PMC_PLL_ACR_DEFAULT_UPLL UL(0x12020010) /* Default PLL ACR value for UPLL */
> +#define AT91_PMC_PLL_ACR_DEFAULT_PLLA UL(0x00020010) /* Default PLL ACR value for PLLA */
> #define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */
> #define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */
>

2022-10-14 21:05:31

by Stephen Boyd

Subject: Re: [PATCH v2] clk: at91: fix the build with binutils 2.27

Quoting Kefeng Wang (2022-10-11 20:06:35)
> There is an issue when build with older versions of binutils 2.27.0,
>
> arch/arm/mach-at91/pm_suspend.S: Assembler messages:
> arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
>
> Use UL() macro to fix the issue in assembly file.
>
> Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
> Signed-off-by: Kefeng Wang <[email protected]>
> ---

Applied to clk-next