From: Frank Wunderlich <[email protected]>
After PCIe binding got reviewed here the last 2 PCIe Patches for adding
DTS nodes to mt7986 and bpi-r3.
based on:
rework mtk pcie-gen3 bindings and support mt7986
https://patchwork.kernel.org/project/linux-mediatek/list/?series=688557
Add BananaPi R3
https://patchwork.kernel.org/project/linux-mediatek/list/?series=688984
Frank Wunderlich (1):
arm64: dts: mt7986: add pcie node to BananaPi-R3
Sam Shih (1):
arm64: dts: mt7986: add pcie related device nodes
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 17 ++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 +++++++++++++++++++
3 files changed, 85 insertions(+)
--
2.34.1
From: Sam Shih <[email protected]>
This patch adds PCIe support for MT7986.
Signed-off-by: Jieyy Yang <[email protected]>
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Frank Wunderlich <[email protected]>
---
changes compared to sams original version:
- add clock-names to pcie node
- update clocks to new binding
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 ++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index c5cc7bd19dbf..1f29e6da856e 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -100,6 +100,15 @@ &mmc0 {
non-removable;
no-sd;
no-sdio;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ status = "okay";
+};
+
+&pcie_phy {
status = "okay";
};
@@ -162,6 +171,13 @@ conf-rst {
};
};
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+ };
+ };
+
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index a1a788db113a..eb9023857a05 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7986-clk.h>
#include <dt-bindings/reset/mt7986-resets.h>
+#include <dt-bindings/phy/phy.h>
/ {
interrupt-parent = <&gic>;
@@ -313,6 +314,57 @@ mmc0: mmc@11230000 {
status = "disabled";
};
+ pcie: pcie@11280000 {
+ compatible = "mediatek,mt7986-pcie",
+ "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x00 0x11280000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0x00 0x20000000 0x00
+ 0x20000000 0x00 0x10000000>;
+ clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
+ <&infracfg CLK_INFRA_IPCIE_CK>,
+ <&infracfg CLK_INFRA_IPCIER_CK>,
+ <&infracfg CLK_INFRA_IPCIEB_CK>;
+ clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
+ status = "disabled";
+
+ phys = <&pcie_port PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie_phy: t-phy@11c00000 {
+ compatible = "mediatek,mt7986-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ pcie_port: pcie-phy@11c00000 {
+ reg = <0 0x11c00000 0 0x20000>;
+ clocks = <&clk40m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
usb_phy: t-phy@11e10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
--
2.34.1