Current driver code will read device tree node information,
and set default values if there is no info provided.
This is not done in non-OF devices leading to SGMII fifo depths being
set to the smallest size.
This patch sets the value to the default value of the PHY as stated in the
PHY datasheet.
Signed-off-by: Michael Sit Wei Hong <[email protected]>
---
drivers/net/phy/dp83867.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 6939563d3b7c..fb7df4baaf6f 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -682,6 +682,13 @@ static int dp83867_of_init(struct phy_device *phydev)
*/
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2;
+ /* For non-OF device, the RX and TX FIFO depths are taken from
+ * default value. So, we init RX & TX FIFO depths here
+ * so that it is configured correctly later in dp83867_config_init();
+ */
+ dp83867->tx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB;
+ dp83867->rx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB;
+
return 0;
}
#endif /* CONFIG_OF_MDIO */
--
2.34.1
On Tue, Nov 08, 2022 at 06:12:18PM +0800, Michael Sit Wei Hong wrote:
> Current driver code will read device tree node information,
> and set default values if there is no info provided.
>
> This is not done in non-OF devices leading to SGMII fifo depths being
> set to the smallest size.
>
> This patch sets the value to the default value of the PHY as stated in the
> PHY datasheet.
>
> Signed-off-by: Michael Sit Wei Hong <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, 8 Nov 2022 18:12:18 +0800 Michael Sit Wei Hong wrote:
> Current driver code will read device tree node information,
> and set default values if there is no info provided.
>
> This is not done in non-OF devices leading to SGMII fifo depths being
> set to the smallest size.
>
> This patch sets the value to the default value of the PHY as stated in the
> PHY datasheet.
We need a Fixes tag, which commit should have contained this code?
> -----Original Message-----
> From: Jakub Kicinski <[email protected]>
> Sent: Wednesday, November 9, 2022 9:56 AM
> To: Sit, Michael Wei Hong <[email protected]>
> Cc: Andrew Lunn <[email protected]>; Heiner Kallweit
> <[email protected]>; Russell King <[email protected]>;
> David S . Miller <[email protected]>; Eric Dumazet
> <[email protected]>; Paolo Abeni <[email protected]>;
> [email protected]; [email protected]; Looi,
> Hong Aun <[email protected]>; Voon, Weifeng
> <[email protected]>; Tan, Tee Min
> <[email protected]>; Zulkifli, Muhammad Husaini
> <[email protected]>; Gan, Yi Fang
> <[email protected]>
> Subject: Re: [PATCH net 1/1] net: phy: dp83867: Fix SGMII FIFO
> depth for non OF devices
>
> On Tue, 8 Nov 2022 18:12:18 +0800 Michael Sit Wei Hong wrote:
> > Current driver code will read device tree node information, and
> set
> > default values if there is no info provided.
> >
> > This is not done in non-OF devices leading to SGMII fifo depths
> being
> > set to the smallest size.
> >
> > This patch sets the value to the default value of the PHY as
> stated in
> > the PHY datasheet.
>
> We need a Fixes tag, which commit should have contained this
> code?
Will add the Fixes tag in the next revision.
Thanks.