mcba_usb_xmit_cmd() gets free ctx by mcba_usb_get_free_ctx(). When
mcba_usb_xmit() fails, the ctx should be freed with mcba_usb_free_ctx()
like mcba_usb_start_xmit() does in label "xmit_failed" to avoid potential
resource leak.
Fix it by calling mcba_usb_free_ctx() when mcba_usb_xmit() fails.
Signed-off-by: Jianglei Nie <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 218b098b261d..471f6be6e030 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -380,9 +380,11 @@ static void mcba_usb_xmit_cmd(struct mcba_priv *priv,
}
err = mcba_usb_xmit(priv, usb_msg, ctx);
- if (err)
+ if (err) {
+ mcba_usb_free_ctx(ctx);
netdev_err(priv->netdev, "Failed to send cmd (%d)",
usb_msg->cmd_id);
+ }
}
static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate)
--
2.25.1
On 20.11.2022 18:14:14, Jianglei Nie wrote:
> mcba_usb_xmit_cmd() gets free ctx by mcba_usb_get_free_ctx(). When
> mcba_usb_xmit() fails, the ctx should be freed with mcba_usb_free_ctx()
> like mcba_usb_start_xmit() does in label "xmit_failed" to avoid potential
> resource leak.
>
> Fix it by calling mcba_usb_free_ctx() when mcba_usb_xmit() fails.
>
> Signed-off-by: Jianglei Nie <[email protected]>
Applied to linux-can.
Thanks,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |