When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/pcs/pcs-altera-tse.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c
index e86cadc391e8..be65271ff5de 100644
--- a/drivers/net/pcs/pcs-altera-tse.c
+++ b/drivers/net/pcs/pcs-altera-tse.c
@@ -102,7 +102,6 @@ static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
- if_mode |= PCS_IF_MODE_SGMI_SPEED_1000;
}
ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
--
2.38.1