2022-11-18 23:59:35

by Uwe Kleine-König

[permalink] [raw]
Subject: [PATCH 209/606] Input: atmel_captouch - Convert to i2c's .probe_new()

From: Uwe Kleine-König <[email protected]>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/input/misc/atmel_captouch.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
index 156c699a8913..d9704b174d3a 100644
--- a/drivers/input/misc/atmel_captouch.c
+++ b/drivers/input/misc/atmel_captouch.c
@@ -161,8 +161,7 @@ static irqreturn_t atmel_captouch_isr(int irq, void *data)
/*
* Probe function to setup the device, input system and interrupt
*/
-static int atmel_captouch_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int atmel_captouch_probe(struct i2c_client *client)
{
struct atmel_captouch_device *capdev;
struct device *dev = &client->dev;
@@ -264,7 +263,7 @@ static const struct i2c_device_id atmel_captouch_id[] = {
MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);

static struct i2c_driver atmel_captouch_driver = {
- .probe = atmel_captouch_probe,
+ .probe_new = atmel_captouch_probe,
.id_table = atmel_captouch_id,
.driver = {
.name = "atmel_captouch",
--
2.38.1



2022-12-06 11:40:29

by Jean Delvare

[permalink] [raw]
Subject: Re: [PATCH 209/606] Input: atmel_captouch - Convert to i2c's .probe_new()

On Fri, 18 Nov 2022 23:39:03 +0100, Uwe Kleine-König wrote:
> From: Uwe Kleine-König <[email protected]>
>
> The probe function doesn't make use of the i2c_device_id * parameter so it
> can be trivially converted.
>
> Signed-off-by: Uwe Kleine-König <[email protected]>
> ---
> drivers/input/misc/atmel_captouch.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
> index 156c699a8913..d9704b174d3a 100644
> --- a/drivers/input/misc/atmel_captouch.c
> +++ b/drivers/input/misc/atmel_captouch.c
> @@ -161,8 +161,7 @@ static irqreturn_t atmel_captouch_isr(int irq, void *data)
> /*
> * Probe function to setup the device, input system and interrupt
> */
> -static int atmel_captouch_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +static int atmel_captouch_probe(struct i2c_client *client)
> {
> struct atmel_captouch_device *capdev;
> struct device *dev = &client->dev;
> @@ -264,7 +263,7 @@ static const struct i2c_device_id atmel_captouch_id[] = {
> MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);
>
> static struct i2c_driver atmel_captouch_driver = {
> - .probe = atmel_captouch_probe,
> + .probe_new = atmel_captouch_probe,
> .id_table = atmel_captouch_id,
> .driver = {
> .name = "atmel_captouch",

Reviewed-by: Jean Delvare <[email protected]>

--
Jean Delvare
SUSE L3 Support