Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
Changes since v2:
1. Add tag
Changes since v1:
1. Fix also msm8996-xiaomi-common
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 5b47b8de69da..2acfed28e3cb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -229,7 +229,7 @@ &blsp1_uart2 {
status = "okay";
label = "QCA_UART";
- bluetooth: qca6174a {
+ bluetooth: bluetooth {
compatible = "qcom,qca6174-bt";
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index c7a22c7976b7..6437551c61d4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -424,7 +424,7 @@ &uart3 {
pinctrl-names = "default", "sleep";
pinctrl-1 = <&qup_uart3_sleep>;
- bluetooth: wcn3990-bt {
+ bluetooth: bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&vreg_l10a_1p8>;
vddxo-supply = <&vreg_l1c_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 4ed6f9fb1a3c..9e26b07512bc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -862,7 +862,7 @@ &uart6 {
pinctrl-0 = <&qup_uart6_4pin>;
- bluetooth: wcn3990-bt {
+ bluetooth: bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&src_pp1800_s4a>;
vddxo-supply = <&pp1800_l7a_wcn3990>;
--
2.34.1
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes: cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
Changes since v2:
1. Add tag
2. Correct typo in commit msg
Changes since v1:
1. None
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index fafd92edc855..f9a05bdcc364 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1048,8 +1048,6 @@ uart2: serial@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
--
2.34.1
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
Changes since v2:
1. Add tag
2. Correct typo in commit msg
Changes since v1:
1. None
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5ba65780166e..873bc9c412f2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1007,8 +1007,6 @@ uart20: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart20_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -1401,8 +1399,6 @@ uart7: serial@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
};
--
2.34.1
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes: 377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
Changes since v2:
1. Add tag
2. Correct typo in commit msg
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 59756ec11564..c183eb5cb406 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1487,8 +1487,6 @@ uart7: serial@a9c000 {
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
};
--
2.34.1
On Tue, 24 Jan 2023 09:49:48 +0100, Krzysztof Kozlowski wrote:
> Node names should be generic (as Devicetree spec mandates), so use
> "bluetooth" for BT node.
>
>
Applied, thanks!
[1/4] arm64: dts: qcom: use generic node name for Bluetooth
commit: f7aaaf3030d8c9873b2bb3abbe506fa4da8936cf
[2/4] arm64: dts: qcom: sm8350: drop incorrect cells from serial
commit: 6027331e6eae9eb957d1b73a7e3255f4151d6163
[3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial
commit: 60d2da2c916956535cf37b7bf1ae8fefbf432e55
[4/4] arm64: dts: qcom: sm8550: drop incorrect cells from serial
commit: fa3ba1c6a0be9f1924daa312271245cafd3f4305
Best regards,
--
Bjorn Andersson <[email protected]>