2023-03-07 02:35:46

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 00/11] Adjust the dma-ranges for MTK IOMMU

After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges is not allowed for dts leaf node.
but we still would like to separate the different masters into
different iova regions. Thus we adjust the internal flow, separate
the 16GB iova range by the master HW larbid/portid and add the
dma-ranges property in the parent "soc" node. This also could avoid
the users forget/abuse the iova regions.

The commit f1ad5338a4d5 did affect the mt8195 venc, But it is not
a fatal issue, it could also work well at 0-4GB iova. thus I don't
add "Fixes:" tag.

In this series, I add functions for mt8192/mt8195/mt8186, mt8188 will
be in its special patchset. and the previous mt8173/mt8183...support
0-4GB only, no need this function.

Change note:
v5: Nothing change. Just rebase on v6.3-rc1.

v4: https://lore.kernel.org/linux-mediatek/[email protected]/
Improve the comment in the code from AngeloGioacchino.

v3: https://lore.kernel.org/linux-mediatek/[email protected]/
Add a new patch only for comment more in the code.

v2: https://lore.kernel.org/linux-mediatek/[email protected]/
a) Base on next-20230206 since mt8195 jpeg node is applied which affect
this patch.
b) Reword the commit message [1/10][2/10] to explain effect.

v1: https://lore.kernel.org/linux-mediatek/[email protected]/
Base on v6.2-rc3.

Yong Wu (11):
dt-bindings: media: mediatek,vcodec: Remove dma-ranges property
dt-bindings: media: mediatek,jpeg: Remove dma-ranges property
iommu/mediatek: Improve comment for the current region/bank
iommu/mediatek: Get regionid from larb/port id
iommu/mediatek: mt8192: Add iova_region_larb_msk
iommu/mediatek: mt8195: Add iova_region_larb_msk
iommu/mediatek: mt8186: Add iova_region_larb_msk
iommu/mediatek: Add a gap for the iova regions
arm64: dts: mt8195: Add dma-ranges for the parent "soc" node
arm64: dts: mt8195: Remove the unnecessary dma-ranges
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node

.../media/mediatek,mt8195-jpegdec.yaml | 7 -
.../media/mediatek,mt8195-jpegenc.yaml | 7 -
.../media/mediatek,vcodec-decoder.yaml | 5 -
.../media/mediatek,vcodec-encoder.yaml | 5 -
.../media/mediatek,vcodec-subdev-decoder.yaml | 7 -
.../bindings/media/mediatek-jpeg-encoder.yaml | 5 -
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 1 +
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 4 +-
drivers/iommu/mtk_iommu.c | 143 ++++++++++++++----
9 files changed, 114 insertions(+), 70 deletions(-)

--
2.18.0




2023-03-07 02:36:02

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 01/11] dt-bindings: media: mediatek,vcodec: Remove dma-ranges property

After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for vcodec here.

1) For mediatek,vcodec-decoder.yaml and mediatek,vcodec-encoder.yaml,
this property is in the leaf node, it is invalid as the above comment.

Currently there is only mt8195 VENC node has this property in upstream.
Indeed, VENC is affected, but it is not a fatal issue. Originally it
expects its iova range locate at 4GB-8GB. However after that commit, its
expectation doesn't come true, it will fall back to 0-4GB iova and also
could work well.

2) For mediatek,vcodec-subdev-decoder.yaml, It already uses parent-child
node, this property works. Instead, MediaTek iommu will control the
masters' iova ranges by the master's larb/port id internally, then the
dma-ranges property is unnecessary for the master's node.

Cc: Tiffany Lin <[email protected]>
Cc: Andrew-CT Chen <[email protected]>
Cc: Yunfei Dong <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Matthias Brugger <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 5 -----
.../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 5 -----
.../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 7 -------
3 files changed, 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
index aa55ca65d6ed..fad59b486d5d 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -56,11 +56,6 @@ properties:
List of the hardware port in respective IOMMU block for current Socs.
Refer to bindings/iommu/mediatek,iommu.yaml.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
description:
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index 0f2ea8d9a10c..a2051b31fa29 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -49,11 +49,6 @@ properties:
List of the hardware port in respective IOMMU block for current Socs.
Refer to bindings/iommu/mediatek,iommu.yaml.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
description:
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
index c4f20acdc1f8..290594bc91cc 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -76,11 +76,6 @@ properties:
The node of system control processor (SCP), using
the remoteproc & rpmsg framework.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
"#address-cells":
const: 2

@@ -203,7 +198,6 @@ required:
- reg
- iommus
- mediatek,scp
- - dma-ranges
- ranges

if:
@@ -236,7 +230,6 @@ examples:
compatible = "mediatek,mt8192-vcodec-dec";
mediatek,scp = <&scp>;
iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0x16000000 0 0x40000>;
--
2.25.1


2023-03-07 02:36:32

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 02/11] dt-bindings: media: mediatek,jpeg: Remove dma-ranges property

After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for jpeg here.

Currently there is only mt8195 jpeg node has this property in upstream,
and it already uses parent-child node, this property did work. But instead,
MediaTek iommu will control the masters' iova ranges by the master's
larb/port id internally, then this property is unnecessary.

Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Bin Liu <[email protected]>
Cc: kyrie wu <[email protected]>
Cc: Xia Jiang <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml | 7 -------
.../devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml | 7 -------
.../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 5 -----
3 files changed, 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
index 71595c013dbb..e5448c60e3eb 100644
--- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -26,11 +26,6 @@ properties:
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
Ports are according to the HW.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
"#address-cells":
const: 2

@@ -89,7 +84,6 @@ required:
- compatible
- power-domains
- iommus
- - dma-ranges
- ranges

additionalProperties: false
@@ -115,7 +109,6 @@ examples:
<&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
<&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
<&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
index 95990539f7c0..596186497b68 100644
--- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -26,11 +26,6 @@ properties:
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
Ports are according to the HW.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
"#address-cells":
const: 2

@@ -89,7 +84,6 @@ required:
- compatible
- power-domains
- iommus
- - dma-ranges
- ranges

additionalProperties: false
@@ -113,7 +107,6 @@ examples:
<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index c8412e8ab353..37800e1908cc 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -44,11 +44,6 @@ properties:
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
Ports are according to the HW.

- dma-ranges:
- maxItems: 1
- description: |
- Describes the physical address space of IOMMU maps to memory.
-
required:
- compatible
- reg
--
2.25.1


2023-03-07 02:36:46

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 03/11] iommu/mediatek: Improve comment for the current region/bank

No functional change. Just add more comment about the current region/bank
in the code.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d5a4955910ff..aa4bdcb65ea7 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -197,12 +197,33 @@ struct mtk_iommu_plat_data {

char *pericfg_comp_str;
struct list_head *hw_list;
- unsigned int iova_region_nr;
- const struct mtk_iommu_iova_region *iova_region;

- u8 banks_num;
- bool banks_enable[MTK_IOMMU_BANK_MAX];
- unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
+ /*
+ * The IOMMU HW may support 16GB iova. In order to balance the IOVA ranges,
+ * different masters will be put in different iova ranges, for example vcodec
+ * is in 4G-8G and cam is in 8G-12G. Meanwhile, some masters may have the
+ * special IOVA range requirement, like CCU can only support the address
+ * 0x40000000-0x44000000.
+ * Here list the iova ranges this SoC supports and which larbs/ports are in
+ * which region.
+ *
+ * 16GB iova all use one pgtable, but each a region is a iommu group.
+ */
+ struct {
+ unsigned int iova_region_nr;
+ const struct mtk_iommu_iova_region *iova_region;
+ };
+
+ /*
+ * The IOMMU HW may have 5 banks. Each bank has a independent pgtable.
+ * Here list how many banks this SoC supports/enables and which ports are in which bank.
+ */
+ struct {
+ u8 banks_num;
+ bool banks_enable[MTK_IOMMU_BANK_MAX];
+ unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
+ };
+
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};

--
2.25.1


2023-03-07 02:36:54

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 04/11] iommu/mediatek: Get regionid from larb/port id

After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges is not allowed for dts leaf node.
but we still would like to separate to different masters
into different iova regions.

Thus we have to separate it by the HW larbid and portid. For example,
larb1/2 are in region2 and larb3 is in region3. The problem is that
some ports inside a larb are in region4 while some ports inside this
larb are in region5. Therefore I define a "iova_region_larb_msk" to help
record the information for each a port. Take a example for a larb:
[1] = ~0: means all ports in this larb are in region1;
[2] = BIT(3) | BIT(4): means port3/4 in this larb are region2;
[3] = ~(BIT(3) | BIT(4)): means all the other ports except port3/4
in this larb are region3.

This method also avoids the users forget/abuse the iova regions.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 51 ++++++++++++++++++++++++---------------
1 file changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index aa4bdcb65ea7..89a80982b7d1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -8,7 +8,6 @@
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/device.h>
-#include <linux/dma-direct.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -212,6 +211,15 @@ struct mtk_iommu_plat_data {
struct {
unsigned int iova_region_nr;
const struct mtk_iommu_iova_region *iova_region;
+ /*
+ * Indicate the correspondance between larbs, ports and regions.
+ *
+ * The index is the same as iova_region and larb port numbers are
+ * described as bit positions.
+ * For example, storing BIT(0) at index 2,1 means "larb 1, port0 is in region 2".
+ * [2] = { [1] = BIT(0) }
+ */
+ const u32 (*iova_region_larb_msk)[MTK_LARB_NR_MAX];
};

/*
@@ -529,30 +537,33 @@ static unsigned int mtk_iommu_get_bank_id(struct device *dev,
static int mtk_iommu_get_iova_region_id(struct device *dev,
const struct mtk_iommu_plat_data *plat_data)
{
- const struct mtk_iommu_iova_region *rgn = plat_data->iova_region;
- const struct bus_dma_region *dma_rgn = dev->dma_range_map;
- int i, candidate = -1;
- dma_addr_t dma_end;
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ unsigned int portidmsk = 0, larbid;
+ const u32 *rgn_larb_msk;
+ int i, region_id = -1;

- if (!dma_rgn || plat_data->iova_region_nr == 1)
+ if (plat_data->iova_region_nr == 1)
return 0;

- dma_end = dma_rgn->dma_start + dma_rgn->size - 1;
- for (i = 0; i < plat_data->iova_region_nr; i++, rgn++) {
- /* Best fit. */
- if (dma_rgn->dma_start == rgn->iova_base &&
- dma_end == rgn->iova_base + rgn->size - 1)
- return i;
- /* ok if it is inside this region. */
- if (dma_rgn->dma_start >= rgn->iova_base &&
- dma_end < rgn->iova_base + rgn->size)
- candidate = i;
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ for (i = 0; i < fwspec->num_ids; i++)
+ portidmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+ for (i = 0; i < plat_data->iova_region_nr; i++) {
+ rgn_larb_msk = plat_data->iova_region_larb_msk[i];
+ if (!rgn_larb_msk)
+ continue;
+
+ if ((rgn_larb_msk[larbid] & portidmsk) == portidmsk) {
+ region_id = i;
+ break;
+ }
}

- if (candidate >= 0)
- return candidate;
- dev_err(dev, "Can NOT find the iommu domain id(%pad 0x%llx).\n",
- &dma_rgn->dma_start, dma_rgn->size);
+ if (region_id >= 0)
+ return region_id;
+ dev_err(dev, "Can NOT find the region for larb(%d-%x).\n",
+ larbid, portidmsk);
return -EINVAL;
}

--
2.25.1


2023-03-07 02:37:15

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 05/11] iommu/mediatek: mt8192: Add iova_region_larb_msk

Add iova_region_larb_msk for mt8192. We separate the 16GB iova regions
by each device's larbid/portid.
Note: larb3/6/8/10/12/15 connect nothing in this SoC.
Refer to the comment in include/dt-bindings/memory/mt8192-larb-port.h

Define a new macro MT8192_MULTI_REGION_NR_MAX to indicate
the index of mt8xxx_larb_region_msk and
"struct mtk_iommu_iova_region mt8192_multi_dom"
are the same.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 89a80982b7d1..710a3239fd3d 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -336,7 +336,12 @@ static const struct mtk_iommu_iova_region single_domain[] = {
{.iova_base = 0, .size = SZ_4G},
};

-static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
+#define MT8192_MULTI_REGION_NR_MAX 6
+
+#define MT8192_MULTI_REGION_NR (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) ? \
+ MT8192_MULTI_REGION_NR_MAX : 1)
+
+static const struct mtk_iommu_iova_region mt8192_multi_dom[MT8192_MULTI_REGION_NR] = {
{ .iova_base = 0x0, .size = SZ_4G}, /* 0 ~ 4G */
#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
{ .iova_base = SZ_4G, .size = SZ_4G}, /* 4G ~ 8G */
@@ -1538,6 +1543,17 @@ static const struct mtk_iommu_plat_data mt8186_data_mm = {
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
};

+static const unsigned int mt8192_larb_region_msk[MT8192_MULTI_REGION_NR_MAX][MTK_LARB_NR_MAX] = {
+ [0] = {~0, ~0}, /* Region0: larb0/1 */
+ [1] = {0, 0, 0, 0, ~0, ~0, 0, ~0}, /* Region1: larb4/5/7 */
+ [2] = {0, 0, ~0, 0, 0, 0, 0, 0, /* Region2: larb2/9/11/13/14/16/17/18/19/20 */
+ 0, ~0, 0, ~0, 0, ~(u32)(BIT(9) | BIT(10)), ~(u32)(BIT(4) | BIT(5)), 0,
+ ~0, ~0, ~0, ~0, ~0},
+ [3] = {0},
+ [4] = {[13] = BIT(9) | BIT(10)}, /* larb13 port9/10 */
+ [5] = {[14] = BIT(4) | BIT(5)}, /* larb14 port4/5 */
+};
+
static const struct mtk_iommu_plat_data mt8192_data = {
.m4u_plat = M4U_MT8192,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
@@ -1547,6 +1563,7 @@ static const struct mtk_iommu_plat_data mt8192_data = {
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+ .iova_region_larb_msk = mt8192_larb_region_msk,
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
{0, 14, 16}, {0, 13, 18, 17}},
};
--
2.25.1


2023-03-07 02:37:36

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 06/11] iommu/mediatek: mt8195: Add iova_region_larb_msk

Add iova_region_larb_msk for mt8195. We separate the 16GB iova regions
by each device's larbid/portid.
Refer to include/dt-bindings/memory/mt8195-memory-port.h

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 710a3239fd3d..0e387345e1c3 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1583,6 +1583,21 @@ static const struct mtk_iommu_plat_data mt8195_data_infra = {
.iova_region_nr = ARRAY_SIZE(single_domain),
};

+static const unsigned int mt8195_larb_region_msk[MT8192_MULTI_REGION_NR_MAX][MTK_LARB_NR_MAX] = {
+ [0] = {~0, ~0, ~0, ~0}, /* Region0: all ports for larb0/1/2/3 */
+ [1] = {0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, ~0, ~0, ~0, ~0, ~0, /* Region1: larb19/20/21/22/23/24 */
+ ~0},
+ [2] = {0, 0, 0, 0, ~0, ~0, ~0, ~0, /* Region2: the other larbs. */
+ ~0, ~0, ~0, ~0, ~0, ~0, ~0, ~0,
+ ~0, ~0, 0, 0, 0, 0, 0, 0,
+ 0, ~0, ~0, ~0, ~0},
+ [3] = {0},
+ [4] = {[18] = BIT(0) | BIT(1)}, /* Only larb18 port0/1 */
+ [5] = {[18] = BIT(2) | BIT(3)}, /* Only larb18 port2/3 */
+};
+
static const struct mtk_iommu_plat_data mt8195_data_vdo = {
.m4u_plat = M4U_MT8195,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
@@ -1593,6 +1608,7 @@ static const struct mtk_iommu_plat_data mt8195_data_vdo = {
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+ .iova_region_larb_msk = mt8195_larb_region_msk,
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
{13, 17, 15/* 17b */, 25}, {5}},
};
@@ -1607,6 +1623,7 @@ static const struct mtk_iommu_plat_data mt8195_data_vpp = {
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+ .iova_region_larb_msk = mt8195_larb_region_msk,
.larbid_remap = {{1}, {3},
{22, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 23},
{8}, {20}, {12},
--
2.25.1


2023-03-07 02:38:01

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 07/11] iommu/mediatek: mt8186: Add iova_region_larb_msk

Add iova_region_larb_msk for mt8186. We separate the 16GB iova regions
by each device's larbid/portid.
Note: larb5/6/10/12/14/15/18 connect nothing in this SoC.
Refer to include/dt-bindings/memory/mt8186-memory-port.h

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 0e387345e1c3..fbfc5e4e56a8 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1529,6 +1529,18 @@ static const struct mtk_iommu_plat_data mt8183_data = {
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
};

+static const unsigned int mt8186_larb_region_msk[MT8192_MULTI_REGION_NR_MAX][MTK_LARB_NR_MAX] = {
+ [0] = {~0, ~0, ~0}, /* Region0: all ports for larb0/1/2 */
+ [1] = {0, 0, 0, 0, ~0, 0, 0, ~0}, /* Region1: larb4/7 */
+ [2] = {0, 0, 0, 0, 0, 0, 0, 0, /* Region2: larb8/9/11/13/16/17/19/20 */
+ ~0, ~0, 0, ~0, 0, ~(u32)(BIT(9) | BIT(10)), 0, 0,
+ /* larb13: the other ports except port9/10 */
+ ~0, ~0, 0, ~0, ~0},
+ [3] = {0},
+ [4] = {[13] = BIT(9) | BIT(10)}, /* larb13 port9/10 */
+ [5] = {[14] = ~0}, /* larb14 */
+};
+
static const struct mtk_iommu_plat_data mt8186_data_mm = {
.m4u_plat = M4U_MT8186,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
@@ -1541,6 +1553,7 @@ static const struct mtk_iommu_plat_data mt8186_data_mm = {
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
+ .iova_region_larb_msk = mt8186_larb_region_msk,
};

static const unsigned int mt8192_larb_region_msk[MT8192_MULTI_REGION_NR_MAX][MTK_LARB_NR_MAX] = {
--
2.25.1


2023-03-07 02:38:25

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 08/11] iommu/mediatek: Add a gap for the iova regions

As the removed property in the vcodec dt-binding, the property is:
dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;

The length is 0xfff0_0000 rather than 0x1_0000_0000, this means it
requires 1M as a gap. This is because the end address for some vcodec
HW is (address + size). If the size is 4G, the end address may be
0x2_0000_0000, and the width for vcodec register only is 32, then the
HW may get the ZERO address.

Currently the consumer's dma-ranges property doesn't work, IOMMU
has to consider this case. Add a bigger gap(8M) for all the regions
to avoid it.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/iommu/mtk_iommu.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fbfc5e4e56a8..e0264d5f1c9a 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -332,8 +332,10 @@ static LIST_HEAD(m4ulist); /* List all the M4U HWs */

#define for_each_m4u(data, head) list_for_each_entry(data, head, list)

+#define MTK_IOMMU_IOVA_SZ_4G (SZ_4G - SZ_8M) /* 8M as gap */
+
static const struct mtk_iommu_iova_region single_domain[] = {
- {.iova_base = 0, .size = SZ_4G},
+ {.iova_base = 0, .size = MTK_IOMMU_IOVA_SZ_4G},
};

#define MT8192_MULTI_REGION_NR_MAX 6
@@ -342,11 +344,11 @@ static const struct mtk_iommu_iova_region single_domain[] = {
MT8192_MULTI_REGION_NR_MAX : 1)

static const struct mtk_iommu_iova_region mt8192_multi_dom[MT8192_MULTI_REGION_NR] = {
- { .iova_base = 0x0, .size = SZ_4G}, /* 0 ~ 4G */
+ { .iova_base = 0x0, .size = MTK_IOMMU_IOVA_SZ_4G}, /* 0 ~ 4G, */
#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
- { .iova_base = SZ_4G, .size = SZ_4G}, /* 4G ~ 8G */
- { .iova_base = SZ_4G * 2, .size = SZ_4G}, /* 8G ~ 12G */
- { .iova_base = SZ_4G * 3, .size = SZ_4G}, /* 12G ~ 16G */
+ { .iova_base = SZ_4G, .size = MTK_IOMMU_IOVA_SZ_4G}, /* 4G ~ 8G */
+ { .iova_base = SZ_4G * 2, .size = MTK_IOMMU_IOVA_SZ_4G}, /* 8G ~ 12G */
+ { .iova_base = SZ_4G * 3, .size = MTK_IOMMU_IOVA_SZ_4G}, /* 12G ~ 16G */

{ .iova_base = 0x240000000ULL, .size = 0x4000000}, /* CCU0 */
{ .iova_base = 0x244000000ULL, .size = 0x4000000}, /* CCU1 */
--
2.25.1


2023-03-07 02:38:41

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 09/11] arm64: dts: mt8195: Add dma-ranges for the parent "soc" node

After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges property is not allowed for
the leaf node. But our iommu/dma-ranges is 16GB, we still expect
separate the 16GB dma-range like:
a) display is in 0 - 4GB;
b) vcodec is in 4GB - 8GB;
c) camera is in 8GB - 12GB.
We can not expect all the masters add a parent node for them,
especial for the existed drivers/nodes.
Thus, we add whole the 16GB dma-ranges in the parent "soc" node.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 8f1264d5290b..0f5a31ca1b70 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -364,6 +364,7 @@ soc {
#size-cells = <2>;
compatible = "simple-bus";
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;

gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
--
2.25.1


2023-03-07 02:38:45

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 10/11] arm64: dts: mt8195: Remove the unnecessary dma-ranges

After we add the dma-ranges in the parent "soc" node,
this property is unnecessary for the leaf node.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 3 ---
1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 0f5a31ca1b70..7d87cbabc9f1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -2300,7 +2300,6 @@ venc: video-codec@1a020000 {
power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
#address-cells = <2>;
#size-cells = <2>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
};

jpgdec-master {
@@ -2312,7 +2311,6 @@ jpgdec-master {
<&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -2384,7 +2382,6 @@ jpgenc-master {
<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
- dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
--
2.25.1


2023-03-07 02:55:56

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v5 11/11] arm64: dts: mt8186: Add dma-ranges for the parent "soc" node

Prepare for the MM nodes whose dma-ranges(iova range) is 16GB.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a0d3e1f731bd..251eace411c0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -324,6 +324,7 @@ soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
+ dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
ranges;

gic: interrupt-controller@c000000 {
--
2.25.1


2023-03-13 11:52:06

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH v5 01/11] dt-bindings: media: mediatek,vcodec: Remove dma-ranges property

On 07/03/2023 03:34, Yong Wu wrote:
> After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
> controllers"), the dma-ranges of the leaf node doesn't work. Remove
> it for vcodec here.
>
> 1) For mediatek,vcodec-decoder.yaml and mediatek,vcodec-encoder.yaml,
> this property is in the leaf node, it is invalid as the above comment.
>
> Currently there is only mt8195 VENC node has this property in upstream.
> Indeed, VENC is affected, but it is not a fatal issue. Originally it
> expects its iova range locate at 4GB-8GB. However after that commit, its
> expectation doesn't come true, it will fall back to 0-4GB iova and also
> could work well.
>
> 2) For mediatek,vcodec-subdev-decoder.yaml, It already uses parent-child
> node, this property works. Instead, MediaTek iommu will control the
> masters' iova ranges by the master's larb/port id internally, then the
> dma-ranges property is unnecessary for the master's node.
>
> Cc: Tiffany Lin <[email protected]>
> Cc: Andrew-CT Chen <[email protected]>
> Cc: Yunfei Dong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Matthias Brugger <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
> Acked-by: Rob Herring <[email protected]>

Acked-by: Hans Verkuil <[email protected]>

Regards,

Hans

> ---
> .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 5 -----
> .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 5 -----
> .../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 7 -------
> 3 files changed, 17 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> index aa55ca65d6ed..fad59b486d5d 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> @@ -56,11 +56,6 @@ properties:
> List of the hardware port in respective IOMMU block for current Socs.
> Refer to bindings/iommu/mediatek,iommu.yaml.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> description:
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> index 0f2ea8d9a10c..a2051b31fa29 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> @@ -49,11 +49,6 @@ properties:
> List of the hardware port in respective IOMMU block for current Socs.
> Refer to bindings/iommu/mediatek,iommu.yaml.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> description:
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> index c4f20acdc1f8..290594bc91cc 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> @@ -76,11 +76,6 @@ properties:
> The node of system control processor (SCP), using
> the remoteproc & rpmsg framework.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> "#address-cells":
> const: 2
>
> @@ -203,7 +198,6 @@ required:
> - reg
> - iommus
> - mediatek,scp
> - - dma-ranges
> - ranges
>
> if:
> @@ -236,7 +230,6 @@ examples:
> compatible = "mediatek,mt8192-vcodec-dec";
> mediatek,scp = <&scp>;
> iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
> - dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0 0 0 0x16000000 0 0x40000>;


2023-03-13 11:52:16

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH v5 02/11] dt-bindings: media: mediatek,jpeg: Remove dma-ranges property

On 07/03/2023 03:34, Yong Wu wrote:
> After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
> controllers"), the dma-ranges of the leaf node doesn't work. Remove
> it for jpeg here.
>
> Currently there is only mt8195 jpeg node has this property in upstream,
> and it already uses parent-child node, this property did work. But instead,
> MediaTek iommu will control the masters' iova ranges by the master's
> larb/port id internally, then this property is unnecessary.
>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Matthias Brugger <[email protected]>
> Cc: Bin Liu <[email protected]>
> Cc: kyrie wu <[email protected]>
> Cc: Xia Jiang <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
> Acked-by: Rob Herring <[email protected]>

Reviewed-by: Hans Verkuil <[email protected]>

Thanks!

Hans

> ---
> .../devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml | 7 -------
> .../devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml | 7 -------
> .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 5 -----
> 3 files changed, 19 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> index 71595c013dbb..e5448c60e3eb 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> @@ -26,11 +26,6 @@ properties:
> Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
> Ports are according to the HW.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> "#address-cells":
> const: 2
>
> @@ -89,7 +84,6 @@ required:
> - compatible
> - power-domains
> - iommus
> - - dma-ranges
> - ranges
>
> additionalProperties: false
> @@ -115,7 +109,6 @@ examples:
> <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
> <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
> <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
> - dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
> index 95990539f7c0..596186497b68 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
> @@ -26,11 +26,6 @@ properties:
> Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
> Ports are according to the HW.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> "#address-cells":
> const: 2
>
> @@ -89,7 +84,6 @@ required:
> - compatible
> - power-domains
> - iommus
> - - dma-ranges
> - ranges
>
> additionalProperties: false
> @@ -113,7 +107,6 @@ examples:
> <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
> <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
> <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
> - dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> index c8412e8ab353..37800e1908cc 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> @@ -44,11 +44,6 @@ properties:
> Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
> Ports are according to the HW.
>
> - dma-ranges:
> - maxItems: 1
> - description: |
> - Describes the physical address space of IOMMU maps to memory.
> -
> required:
> - compatible
> - reg


2023-03-21 08:57:04

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH v5 00/11] Adjust the dma-ranges for MTK IOMMU

On 07/03/2023 03:34, Yong Wu wrote:
> After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
> controllers"), the dma-ranges is not allowed for dts leaf node.
> but we still would like to separate the different masters into
> different iova regions. Thus we adjust the internal flow, separate
> the 16GB iova range by the master HW larbid/portid and add the
> dma-ranges property in the parent "soc" node. This also could avoid
> the users forget/abuse the iova regions.
>
> The commit f1ad5338a4d5 did affect the mt8195 venc, But it is not
> a fatal issue, it could also work well at 0-4GB iova. thus I don't
> add "Fixes:" tag.
>
> In this series, I add functions for mt8192/mt8195/mt8186, mt8188 will
> be in its special patchset. and the previous mt8173/mt8183...support
> 0-4GB only, no need this function.
>
> Change note:
> v5: Nothing change. Just rebase on v6.3-rc1.
>
> v4: https://lore.kernel.org/linux-mediatek/[email protected]/
> Improve the comment in the code from AngeloGioacchino.
>
> v3: https://lore.kernel.org/linux-mediatek/[email protected]/
> Add a new patch only for comment more in the code.
>
> v2: https://lore.kernel.org/linux-mediatek/[email protected]/
> a) Base on next-20230206 since mt8195 jpeg node is applied which affect
> this patch.
> b) Reword the commit message [1/10][2/10] to explain effect.
>
> v1: https://lore.kernel.org/linux-mediatek/[email protected]/
> Base on v6.2-rc3.
>
> Yong Wu (11):
> dt-bindings: media: mediatek,vcodec: Remove dma-ranges property
> dt-bindings: media: mediatek,jpeg: Remove dma-ranges property

I assume that these two media bindings patches be pulled in through the iommu subsystem?
Or are they independent and can I take them?

Either is fine with me, I just need to know.

Regards,

Hans

> iommu/mediatek: Improve comment for the current region/bank
> iommu/mediatek: Get regionid from larb/port id
> iommu/mediatek: mt8192: Add iova_region_larb_msk
> iommu/mediatek: mt8195: Add iova_region_larb_msk
> iommu/mediatek: mt8186: Add iova_region_larb_msk
> iommu/mediatek: Add a gap for the iova regions
> arm64: dts: mt8195: Add dma-ranges for the parent "soc" node
> arm64: dts: mt8195: Remove the unnecessary dma-ranges
> arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
>
> .../media/mediatek,mt8195-jpegdec.yaml | 7 -
> .../media/mediatek,mt8195-jpegenc.yaml | 7 -
> .../media/mediatek,vcodec-decoder.yaml | 5 -
> .../media/mediatek,vcodec-encoder.yaml | 5 -
> .../media/mediatek,vcodec-subdev-decoder.yaml | 7 -
> .../bindings/media/mediatek-jpeg-encoder.yaml | 5 -
> arch/arm64/boot/dts/mediatek/mt8186.dtsi | 1 +
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 4 +-
> drivers/iommu/mtk_iommu.c | 143 ++++++++++++++----
> 9 files changed, 114 insertions(+), 70 deletions(-)
>