2023-03-23 12:33:57

by Dhruva Gole

[permalink] [raw]
Subject: [RFC PATCH 1/2] gpio: davinci: Do not clear the bank intr enable bit in save_context

The interrupt enable bits might be set if we want to use the GPIO as
wakeup source. Clearing this will mean disabling of interrupts in the GPIO
banks that we may want to wakeup from.
Thus remove the line that was clearing this bit from the driver's save
context function.

Fixes: 0651a730924b ("gpio: davinci: Add support for system suspend/resume PM")
Cc: Devarsh Thakkar <[email protected]>
Signed-off-by: Dhruva Gole <[email protected]>
---
drivers/gpio/gpio-davinci.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 7fc83057990a..d7595b39e8c4 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -639,9 +639,6 @@ static void davinci_gpio_save_context(struct davinci_gpio_controller *chips,
context->set_falling = readl_relaxed(&g->set_falling);
}

- /* Clear Bank interrupt enable bit */
- writel_relaxed(0, base + BINTEN);
-
/* Clear all interrupt status registers */
writel_relaxed(GENMASK(31, 0), &g->intstat);
}
--
2.25.1


2023-03-28 13:30:46

by Linus Walleij

[permalink] [raw]
Subject: Re: [RFC PATCH 1/2] gpio: davinci: Do not clear the bank intr enable bit in save_context

On Thu, Mar 23, 2023 at 1:29 PM Dhruva Gole <[email protected]> wrote:

> The interrupt enable bits might be set if we want to use the GPIO as
> wakeup source. Clearing this will mean disabling of interrupts in the GPIO
> banks that we may want to wakeup from.
> Thus remove the line that was clearing this bit from the driver's save
> context function.
>
> Fixes: 0651a730924b ("gpio: davinci: Add support for system suspend/resume PM")
> Cc: Devarsh Thakkar <[email protected]>
> Signed-off-by: Dhruva Gole <[email protected]>

Looks like the right solution to me.
I'm a bit surprised given how long we have had this driver.
I suppose people have used out-of-tree patches for suspend/resume. :(

Reviewed-by: Linus Walleij <[email protected]>

Yours,
Linus Walleij

2023-03-30 03:14:45

by Keerthy

[permalink] [raw]
Subject: Re: [RFC PATCH 1/2] gpio: davinci: Do not clear the bank intr enable bit in save_context



On 3/28/2023 6:59 PM, Linus Walleij wrote:
> On Thu, Mar 23, 2023 at 1:29 PM Dhruva Gole <[email protected]> wrote:
>
>> The interrupt enable bits might be set if we want to use the GPIO as
>> wakeup source. Clearing this will mean disabling of interrupts in the GPIO
>> banks that we may want to wakeup from.
>> Thus remove the line that was clearing this bit from the driver's save
>> context function.
>>
>> Fixes: 0651a730924b ("gpio: davinci: Add support for system suspend/resume PM")
>> Cc: Devarsh Thakkar <[email protected]>
>> Signed-off-by: Dhruva Gole <[email protected]>
>
> Looks like the right solution to me.
> I'm a bit surprised given how long we have had this driver.
> I suppose people have used out-of-tree patches for suspend/resume. :(
>
> Reviewed-by: Linus Walleij <[email protected]>

Acked-by: Keerthy <[email protected]>

>
> Yours,
> Linus Walleij