The UP board <https://up-board.org/> is the computer board for
Professional Makers and Industrial Applications. We want to upstream
the UP board 40-pin GP-bus Kernel driver for giving the users better
experience on the software release. (not just download from UP board
github)
These patches are generated from the Linux kernel mainline tag v6.0.
This is the RFC PATCH resend and fixed some of the review issues from
Andy Shevchenko, Lee Jones reviewed on 2022/12/08.
larry.lai (3):
mfd: Add support for UP board CPLD/FPGA
pinctrl: Add support pin control for UP board CPLD/FPGA
leds: Add support for UP board CPLD onboard LEDS
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-upboard.c | 79 ++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/upboard-fpga.c | 527 ++++++++++++
drivers/pinctrl/Kconfig | 14 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-upboard.c | 1281 +++++++++++++++++++++++++++++
include/linux/mfd/upboard-fpga.h | 61 ++
10 files changed, 1987 insertions(+)
create mode 100644 drivers/leds/leds-upboard.c
create mode 100644 drivers/mfd/upboard-fpga.c
create mode 100644 drivers/pinctrl/pinctrl-upboard.c
create mode 100644 include/linux/mfd/upboard-fpga.h
base-commit: 4fe89d07dcc2804c8b562f6c7896a45643d34b2f
--
2.17.1
The UP Squared board <http://www.upboard.com> implements certain
features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA.
This mfd driver implements the line protocol to read and write registers
from the FPGA through regmap. The register address map is also included.
The UP Boards provide a few I/O pin headers (for both GPIO and
functions), including a 40-pin Raspberry Pi compatible header.
This patch implements support for the FPGA-based pin controller that
manages direction and enable state for those header pins.
Partial support UP boards:
* UP core + CREX
* UP core + CRST02
Signed-off-by: Javier Arteaga <[email protected]>
[merge various fixes]
Signed-off-by: Nicola Lunghi <[email protected]>
Reviewed-by: Lee Jones <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: larry.lai <[email protected]>
---
RFC 2022/11/23 -> RFC 2023/04/25
(1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style
and addressed review comments.
PATCH V3 -> RFC 2022/11/23:
(1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and
addressed review comments.
(2) Description on the UP Boards FPGA register read/write protocols
PATCH V2 -> V3:
(1) fixed kernel test robot compiler warning
PATCH V1 -> V2:
(1) Synchronizing upboard github to rc2
(2) Refer 2022/10/31 Lee Jones review, fixed some of the issues.
---
---
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/upboard-fpga.c | 527 +++++++++++++++++++++++++++++++
include/linux/mfd/upboard-fpga.h | 61 ++++
4 files changed, 601 insertions(+)
create mode 100644 drivers/mfd/upboard-fpga.c
create mode 100644 include/linux/mfd/upboard-fpga.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index abb58ab1a1a4..1041e937fc7a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008
under it in the device tree. Additional drivers must be enabled in
order to use the functionality of the device.
+config MFD_INTEL_UPBOARD_FPGA
+ tristate "Support for the Intel platform foundation kit UP board FPGA"
+ select MFD_CORE
+ depends on X86 && ACPI
+ help
+ Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA.
+ This is core driver for the UP board that implements certain (pin
+ control, onboard LEDs or CEC) through an on-board FPGA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called upboard-fpga.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 858cacf659d6..8374a05f6f43 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o
obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
+obj-$(CONFIG_MFD_INTEL_UPBOARD_FPGA) += upboard-fpga.o
obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c
new file mode 100644
index 000000000000..85fd0f858781
--- /dev/null
+++ b/drivers/mfd/upboard-fpga.c
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board multi function device driver for control CPLD/FPGA to
+ * provide more GPIO driving power also provide CPLD LEDs and pin mux function
+ * recognize HID AANT0F00 ~ AAANT0F04 in ACPI name space
+ *
+ * Copyright (c) AAEON. All rights reserved.
+ *
+ * Author: Gary Wang <[email protected]>
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+
+struct upboard_fpga_data {
+ const struct regmap_config *cpld_config;
+ const struct mfd_cell *cells;
+ size_t ncells;
+};
+
+#define AAEON_MANUFACTURER_ID 0x01
+#define SUPPORTED_FW_MAJOR 0x0
+#define MENUFACTURER_ID_MASK GENMASK(7, 0)
+
+#define FIRMWARE_ID_BUILD_OFFSET (12)
+#define FIRMWARE_ID_MAJOR_OFFSET (8)
+#define FIRMWARE_ID_MINOR_OFFSET (4)
+#define FIRMWARE_ID_PATCH_OFFSET (0)
+#define FIRMWARE_ID_MASK GENMASK(3, 0)
+
+/*
+ * For UP Board Series FPGA register read/write protocols
+ * EMUTEX specs:
+ * D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 .... D22 D23
+ * [RW][ address ][ DATA ]
+ *
+ * Read Sequence:
+ * ___ ____________________________________________________ _________
+ * clr: \_/ <--low-pulse does start the write-readback \_/<--start
+ * sequence with partital reset of internal new sequence
+ * registers but the CONF-REG.
+ * ____________________________________________________________________
+ * rst: _/ _ _ _ _ _ _ __ __ __ _
+ * stb: STB#1->_/1\_/2\_/3\_...._/7\_/8\_/9\_/10\_..../23\_/24\_/<-STB#25 edge
+ * is needed
+ * to ACK
+ * (D0 - D7 stb rising latch)
+ * data_in: D0 D1 D2 .... D6 D7 don't ........ care(DC)
+ * data_out: don't ...........care(DC) D8 D9 .... D22 D23
+ * (D8 - D23 stb falling latch)
+ * flag_Read: _________...._________
+ * __DC_ ____________...._________/ \_
+ * counter:
+ * [00]DC[00][01][02] ............[08][9][10]............[24][00]
+ * CONF-REG:
+ * [00] [ CONF-REG ]
+ * wreg:
+ * [00]DC[00][ wreg=SHFT(wreg) ][ADR][DATA][wreg=SHFT(wreg)]
+ * wreg2:
+ * [ (COPY)=ADDR ]
+ */
+static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct upboard_fpga * const fpga = context;
+ int i;
+
+ gpiod_set_value(fpga->clear_gpio, 0);
+ gpiod_set_value(fpga->clear_gpio, 1);
+
+ reg |= UPFPGA_READ_FLAG;
+
+ for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) {
+ gpiod_set_value(fpga->strobe_gpio, 0);
+ gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i)));
+ gpiod_set_value(fpga->strobe_gpio, 1);
+ }
+
+ gpiod_set_value(fpga->strobe_gpio, 0);
+ *val = 0;
+
+ for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) {
+ gpiod_set_value(fpga->strobe_gpio, 1);
+ gpiod_set_value(fpga->strobe_gpio, 0);
+ *val |= gpiod_get_value(fpga->dataout_gpio) << i;
+ }
+
+ gpiod_set_value(fpga->strobe_gpio, 1);
+
+ return 0;
+}
+
+/*
+ * Write Sequence:
+ * ___ ____________________________________________________ _________
+ * clr: \_/ <--low-pulse does start the write-readback \_/<--start
+ * sequence with partital reset of internal new sequence
+ * registers but the CONF-REG.
+ * ____________________________________________________________________
+ * rst: _/ _ _ _ _ _ _ __ __ __ _
+ * stb: STB#1->_/1\_/2\_/3\_...._/7\_/8\_/9\_/10\_..../23\_/24\_/<-STB#25 edge
+ * is needed
+ * to ACK
+ * (D0 - D23 stb rising latch)
+ * data_in: D0 D1 D2 .... D6 D7 D8 D9 .... D22 D23
+ * data_out: don't ................................care (DC)
+ * flag_Read:
+ * __DC_ ____________....__________________________________
+ * counter:
+ * [00]DC[00][01][02] ............[08][9][10]............[24][00]
+ * wreg:
+ * [00]DC[00][wreg=SHFT(wreg)&dat_in ][SHFT(wreg)&dat_in][DAT]
+ * wreg2:
+ * [ (COPY)=ADDR ]
+ * CONF-REG:
+ * [00] [ CONF-REG = OLD VALUE ][CONF-REG=DAT]
+ */
+static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct upboard_fpga * const fpga = context;
+ int i;
+
+ gpiod_set_value(fpga->clear_gpio, 0);
+ gpiod_set_value(fpga->clear_gpio, 1);
+
+ for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) {
+ gpiod_set_value(fpga->strobe_gpio, 0);
+ gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i)));
+ gpiod_set_value(fpga->strobe_gpio, 1);
+ }
+
+ gpiod_set_value(fpga->strobe_gpio, 0);
+
+ for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) {
+ gpiod_set_value(fpga->datain_gpio, !!(val & BIT(i)));
+ gpiod_set_value(fpga->strobe_gpio, 1);
+ gpiod_set_value(fpga->strobe_gpio, 0);
+ }
+
+ gpiod_set_value(fpga->strobe_gpio, 1);
+
+ return 0;
+}
+
+static const struct regmap_range upboard_up_readable_ranges[] = {
+ regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID),
+ regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0),
+ regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1),
+};
+
+static const struct regmap_range upboard_up_writable_ranges[] = {
+ regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0),
+ regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1),
+};
+
+static const struct regmap_access_table upboard_up_readable_table = {
+ .yes_ranges = upboard_up_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges),
+};
+
+static const struct regmap_access_table upboard_up_writable_table = {
+ .yes_ranges = upboard_up_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges),
+};
+
+static const struct regmap_config upboard_up_regmap_config = {
+ .reg_bits = UPFPGA_ADDRESS_SIZE,
+ .val_bits = UPFPGA_REGISTER_SIZE,
+ .max_register = UPFPGA_REG_MAX,
+ .reg_read = upboard_fpga_read,
+ .reg_write = upboard_fpga_write,
+ .fast_io = false,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &upboard_up_readable_table,
+ .wr_table = &upboard_up_writable_table,
+};
+
+static struct upboard_led_data upboard_up_led_data[] = {
+ { .bit = 0, .colour = "yellow" },
+ { .bit = 1, .colour = "green" },
+ { .bit = 2, .colour = "red" },
+};
+
+static const struct mfd_cell upboard_up_mfd_cells[] = {
+ { .name = "upboard-pinctrl" },
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[0],
+ sizeof(*upboard_up_led_data), 0),
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[1],
+ sizeof(*upboard_up_led_data), 1),
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[2],
+ sizeof(*upboard_up_led_data), 2),
+};
+
+/* UP Squared 6000 EHL board */
+
+static const struct upboard_fpga_data upboard_up_fpga_data = {
+ .cpld_config = &upboard_up_regmap_config,
+ .cells = upboard_up_mfd_cells,
+ .ncells = ARRAY_SIZE(upboard_up_mfd_cells),
+};
+
+static const struct mfd_cell upboard_pinctrl_cells[] = {
+ { .name = "upboard-pinctrl" },
+};
+
+static const struct upboard_fpga_data upboard_pinctrl_data = {
+ .cpld_config = &upboard_up_regmap_config,
+ .cells = upboard_pinctrl_cells,
+ .ncells = ARRAY_SIZE(upboard_pinctrl_cells),
+};
+
+/* UP^2 board */
+static const struct regmap_range upboard_up2_readable_ranges[] = {
+ regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID),
+ regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1),
+ regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2),
+ regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2),
+};
+
+static const struct regmap_range upboard_up2_writable_ranges[] = {
+ regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1),
+ regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2),
+ regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2),
+};
+
+static const struct regmap_access_table upboard_up2_readable_table = {
+ .yes_ranges = upboard_up2_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges),
+};
+
+static const struct regmap_access_table upboard_up2_writable_table = {
+ .yes_ranges = upboard_up2_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges),
+};
+
+static const struct regmap_config upboard_up2_regmap_config = {
+ .reg_bits = UPFPGA_ADDRESS_SIZE,
+ .val_bits = UPFPGA_REGISTER_SIZE,
+ .max_register = UPFPGA_REG_MAX,
+ .reg_read = upboard_fpga_read,
+ .reg_write = upboard_fpga_write,
+ .fast_io = false,
+ .cache_type = REGCACHE_NONE,
+ .rd_table = &upboard_up2_readable_table,
+ .wr_table = &upboard_up2_writable_table,
+};
+
+static struct upboard_led_data upboard_up2_led_data[] = {
+ { .bit = 0, .colour = "blue" },
+ { .bit = 1, .colour = "yellow" },
+ { .bit = 2, .colour = "green" },
+ { .bit = 3, .colour = "red" },
+};
+
+static const struct mfd_cell upboard_up2_mfd_cells[] = {
+ { .name = "upboard-pinctrl" },
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[0],
+ sizeof(*upboard_up2_led_data), 0),
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[1],
+ sizeof(*upboard_up2_led_data), 1),
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[2],
+ sizeof(*upboard_up2_led_data), 2),
+ MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[3],
+ sizeof(*upboard_up2_led_data), 3),
+};
+
+static const struct upboard_fpga_data upboard_up2_fpga_data = {
+ .cpld_config = &upboard_up2_regmap_config,
+ .cells = upboard_up2_mfd_cells,
+ .ncells = ARRAY_SIZE(upboard_up2_mfd_cells),
+};
+
+/* UP-CRST02 carrier board for UP Core */
+
+/* same MAX10 config as UP2, but same LED cells as UP1 */
+static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = {
+ .cpld_config = &upboard_up2_regmap_config,
+ .cells = upboard_up_mfd_cells,
+ .ncells = ARRAY_SIZE(upboard_up_mfd_cells),
+};
+
+static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga)
+{
+ enum gpiod_flags flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS;
+
+ fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags);
+ if (IS_ERR(fpga->enable_gpio))
+ return PTR_ERR(fpga->enable_gpio);
+
+ fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW);
+ if (IS_ERR(fpga->clear_gpio))
+ return PTR_ERR(fpga->clear_gpio);
+
+ fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW);
+ if (IS_ERR(fpga->strobe_gpio))
+ return PTR_ERR(fpga->strobe_gpio);
+
+ fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW);
+ if (IS_ERR(fpga->datain_gpio))
+ return PTR_ERR(fpga->datain_gpio);
+
+ fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN);
+ if (IS_ERR(fpga->dataout_gpio))
+ return PTR_ERR(fpga->dataout_gpio);
+
+ /*
+ * The SoC pinctrl driver may not support reserving the GPIO line for
+ * FPGA reset without causing an undesired reset pulse. This will clear
+ * any settings on the FPGA, so only do it if we must.
+ * Reset GPIO defaults HIGH, get GPIO and set to LOW, then set back to
+ * HIGH as a pulse.
+ */
+ if (fpga->uninitialised) {
+ fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(fpga->reset_gpio))
+ return PTR_ERR(fpga->reset_gpio);
+
+ gpiod_set_value(fpga->reset_gpio, 1);
+ }
+
+ gpiod_set_value(fpga->enable_gpio, 1);
+ fpga->uninitialised = false;
+
+ return 0;
+}
+
+/*
+ * This function is for debugging with user for showing firmware information.
+ */
+static int __init upboard_fpga_show_firmware_info(struct upboard_fpga *fpga)
+{
+ unsigned int platform_id, manufacturer_id;
+ unsigned int firmware_id, build, major, minor, patch;
+ int ret;
+
+ if (!fpga)
+ return -ENOMEM;
+
+ ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id);
+ if (ret)
+ return ret;
+
+ manufacturer_id = platform_id & MENUFACTURER_ID_MASK;
+ if (manufacturer_id != AAEON_MANUFACTURER_ID) {
+ dev_err(fpga->dev,
+ "driver not compatible with custom FPGA FW from manufacturer id 0x%02x. Exiting",
+ manufacturer_id);
+
+ return -ENODEV;
+ }
+
+ ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id);
+ if (ret)
+ return ret;
+
+ build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK;
+ major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK;
+ minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK;
+ patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK;
+
+ if (major != SUPPORTED_FW_MAJOR) {
+ dev_err(fpga->dev, "unsupported FPGA FW v%u.%u.%u build 0x%02x",
+ major, minor, patch, build);
+
+ return -ENODEV;
+ }
+
+ dev_info(fpga->dev, "compatible FPGA FW v%u.%u.%u build 0x%02x",
+ major, minor, patch, build);
+
+ return 0;
+}
+
+/*
+ * MFD upboard-fpga is ACPI driver and can recognize the AANT ID from different
+ * kind of upboards. We get the LED GPIO initialized information from this
+ * then add led-upboard driver.
+ */
+int upboard_led_gpio_register(struct upboard_fpga *fpga)
+{
+ struct gpio_led blue_led, yellow_led, green_led, red_led;
+ struct gpio_desc *desc;
+ static struct gpio_led upboard_gpio_leds[4];
+ int leds = 0;
+ static struct gpio_led_platform_data upboard_gpio_led_platform_data;
+ static const struct mfd_cell upboard_gpio_led_cells[] = {
+ MFD_CELL_BASIC("leds-gpio", NULL,
+ &upboard_gpio_led_platform_data,
+ sizeof(upboard_gpio_led_platform_data), 0)
+ };
+ int ret;
+
+ desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW);
+ if (!IS_ERR(desc)) {
+ blue_led.name = "upboard:blue:";
+ blue_led.gpio = desc_to_gpio(desc);
+ blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ upboard_gpio_leds[leds++] = blue_led;
+ devm_gpiod_put(fpga->dev, desc);
+ }
+ desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW);
+ if (!IS_ERR(desc)) {
+ yellow_led.name = "upboard:yellow:";
+ yellow_led.gpio = desc_to_gpio(desc);
+ yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ upboard_gpio_leds[leds++] = yellow_led;
+ devm_gpiod_put(fpga->dev, desc);
+ }
+ desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW);
+ if (!IS_ERR(desc)) {
+ green_led.name = "upboard:green:";
+ green_led.gpio = desc_to_gpio(desc);
+ green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ upboard_gpio_leds[leds++] = green_led;
+ devm_gpiod_put(fpga->dev, desc);
+ }
+ desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW);
+ if (!IS_ERR(desc)) {
+ red_led.name = "upboard:red:";
+ red_led.gpio = desc_to_gpio(desc);
+ red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ upboard_gpio_leds[leds++] = red_led;
+ devm_gpiod_put(fpga->dev, desc);
+ }
+
+ /* no LEDs */
+ if (leds == 0)
+ return 0;
+
+ upboard_gpio_led_platform_data.num_leds = leds;
+ upboard_gpio_led_platform_data.leds = upboard_gpio_leds;
+
+ ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO,
+ upboard_gpio_led_cells,
+ ARRAY_SIZE(upboard_gpio_led_cells),
+ NULL, 0, NULL);
+ if (ret) {
+ dev_err(fpga->dev, "Failed to add GPIO LEDs", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct acpi_device_id upboard_fpga_acpi_match[] = {
+ { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data },
+ { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data },
+ { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data },
+ { "AANT0F02", (kernel_ulong_t)&upboard_up_fpga_data },
+ { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data },
+ { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match);
+
+static int __init upboard_fpga_probe(struct platform_device *pdev)
+{
+ struct upboard_fpga *fpga;
+ const struct acpi_device_id *id;
+ const struct upboard_fpga_data *fpga_data;
+ int ret;
+ struct device *dev = &pdev->dev;
+
+ id = acpi_match_device(upboard_fpga_acpi_match, dev);
+ if (!id)
+ return -ENODEV;
+
+ fpga_data = (const struct upboard_fpga_data *) id->driver_data;
+
+ fpga = devm_kzalloc(dev, sizeof(*fpga), GFP_KERNEL);
+ if (!fpga)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, fpga);
+ fpga->regmap = devm_regmap_init(dev, NULL, fpga, fpga_data->cpld_config);
+ fpga->cpld_config = fpga_data->cpld_config;
+
+ if (IS_ERR(fpga->regmap))
+ return PTR_ERR(fpga->regmap);
+
+ ret = upboard_fpga_gpio_init(fpga);
+ if (ret) {
+ /*
+ * This is for compatiable with some upboards w/o FPGA firmware,
+ * so just showing debug info and do not return directly.
+ */
+ dev_warn(dev, "Failed to initialize FPGA common GPIOs: %d", ret);
+ } else {
+ upboard_fpga_show_firmware_info(fpga);
+ }
+
+ /* register GPIO LEDs */
+ ret = upboard_led_gpio_register(fpga);
+ if (ret) {
+ /*
+ * This is for compatiable with some upboards w/o LEDs.
+ */
+ dev_warn(dev, "Failed to register LEDs: %d", ret);
+ }
+
+ return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
+ fpga_data->cells,
+ fpga_data->ncells,
+ NULL, 0, NULL);
+}
+
+static struct platform_driver upboard_fpga_driver = {
+ .driver = {
+ .name = "upboard-fpga",
+ .acpi_match_table = upboard_fpga_acpi_match,
+ },
+};
+module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe);
+
+MODULE_AUTHOR("Gary Wang <[email protected]>");
+MODULE_DESCRIPTION("UP Board CPLD/FPGA driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h
new file mode 100644
index 000000000000..1fa073e5c53c
--- /dev/null
+++ b/include/linux/mfd/upboard-fpga.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UP Board CPLD/FPGA driver
+ *
+ * Copyright (c) AAEON. All rights reserved.
+ *
+ * Author: Gary Wang <[email protected]>
+ *
+ */
+
+#ifndef __LINUX_MFD_UPBOARD_FPGA_H
+#define __LINUX_MFD_UPBOARD_FPGA_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* CPLD/FPGA protocol version */
+#define UPFPGA_PROTOCOL_V1_HRV 1
+#define UPFPGA_PROTOCOL_V2_HRV 2
+
+#define UPFPGA_ADDRESS_SIZE 7
+#define UPFPGA_REGISTER_SIZE 16
+
+#define UPFPGA_READ_FLAG (1 << UPFPGA_ADDRESS_SIZE)
+
+enum upboard_fpgareg {
+ UPFPGA_REG_PLATFORM_ID = 0x10,
+ UPFPGA_REG_FIRMWARE_ID = 0x11,
+ UPFPGA_REG_FUNC_EN0 = 0x20,
+ UPFPGA_REG_FUNC_EN1 = 0x21,
+ UPFPGA_REG_GPIO_EN0 = 0x30,
+ UPFPGA_REG_GPIO_EN1 = 0x31,
+ UPFPGA_REG_GPIO_EN2 = 0x32,
+ UPFPGA_REG_GPIO_DIR0 = 0x40,
+ UPFPGA_REG_GPIO_DIR1 = 0x41,
+ UPFPGA_REG_GPIO_DIR2 = 0x42,
+ UPFPGA_REG_MAX,
+};
+
+struct upboard_fpga {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_config *cpld_config;
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *clear_gpio;
+ struct gpio_desc *strobe_gpio;
+ struct gpio_desc *datain_gpio;
+ struct gpio_desc *dataout_gpio;
+ bool uninitialised;
+};
+
+struct upboard_led_data {
+ unsigned int bit;
+ const char *colour;
+};
+
+bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg);
+int upboard_led_gpio_register(struct upboard_fpga *fpga);
+
+#endif /* __LINUX_MFD_UPBOARD_FPGA_H */
--
2.17.1
The UP Squared board <http://www.upboard.com> implements certain
features (pin control) through an on-board FPGA.
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: larry.lai <[email protected]>
---
RFC 2022/11/23 -> RFC 2023/04/25
(1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and
addressed review comments.
PATCH V3 -> RFC 2022/11/23:
(1) Refer 2022/11/09 Linus Walleij review, cleaned up coding style and
addressed review comments.
PATCH V2 -> V3:
There's no change.
PATCH V1 -> V2:
(1) Synchronized with upboard github to rc2
(2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed
the regmap and acpi patches and implement in upboard pinctrl driver.
(3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style
issues, removed using gpio_xxxx API and removed including <linux/gpio.h>.
---
---
drivers/pinctrl/Kconfig | 14 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-upboard.c | 1281 +++++++++++++++++++++++++++++
3 files changed, 1296 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-upboard.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1cf74b0c42e5..cc8dae75289b 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -483,6 +483,20 @@ config PINCTRL_THUNDERBAY
rate control and direction control. This module will be
called as pinctrl-thunderbay.
+config PINCTRL_UPBOARD
+ tristate "UP board FPGA pin controller"
+ depends on (X86 && ACPI) || COMPILE_TEST
+ depends on MFD_INTEL_UPBOARD_FPGA
+ select GENERIC_PINCONF
+ select PINMUX
+ select PINCONF
+ help
+ Pin controller for the FPGA GPIO lines on UP boards. Due to the
+ hardware layout, these are meant to be controlled in tandem with their
+ corresponding Intel SoC GPIOs.
+ To compile this driver as a module, choose M here: the module
+ will be called pinctrl-upboard.
+
config PINCTRL_ZYNQ
bool "Pinctrl driver for Xilinx Zynq"
depends on ARCH_ZYNQ
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e76f5cdc64b0..c366706d36e7 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o
obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o
+obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c
new file mode 100644
index 000000000000..9cabbf460d6e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-upboard.c
@@ -0,0 +1,1281 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board HAT pin controller driver
+ * remapping native pin to RPI pin and set CPLD pin dir
+ *
+ * Copyright (c) AAEON. All rights reserved.
+ *
+ * Authors: Gary Wang <[email protected]>
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+
+#include "core.h"
+#include "intel/pinctrl-intel.h"
+
+/* Offset from regs */
+#define REVID 0x000
+#define REVID_SHIFT 16
+#define REVID_MASK GENMASK(31, 16)
+#define PADBAR 0x00c
+
+/* Offset from pad_regs */
+#define PADCFG0 0x000
+#define PADCFG0_RXEVCFG_SHIFT 25
+#define PADCFG0_RXEVCFG_MASK GENMASK(26, 25)
+#define PADCFG0_RXEVCFG_LEVEL 0
+#define PADCFG0_RXEVCFG_EDGE 1
+#define PADCFG0_RXEVCFG_DISABLED 2
+#define PADCFG0_RXEVCFG_EDGE_BOTH 3
+#define PADCFG0_PREGFRXSEL BIT(24)
+#define PADCFG0_RXINV BIT(23)
+#define PADCFG0_GPIROUTIOXAPIC BIT(20)
+#define PADCFG0_GPIROUTSCI BIT(19)
+#define PADCFG0_GPIROUTSMI BIT(18)
+#define PADCFG0_GPIROUTNMI BIT(17)
+#define PADCFG0_PMODE_SHIFT 10
+#define PADCFG0_PMODE_MASK GENMASK(13, 10)
+#define PADCFG0_PMODE_GPIO 0
+#define PADCFG0_GPIORXDIS BIT(9)
+#define PADCFG0_GPIOTXDIS BIT(8)
+#define PADCFG0_GPIORXSTATE BIT(1)
+#define PADCFG0_GPIOTXSTATE BIT(0)
+
+#define PADCFG1 0x004
+#define PADCFG1_TERM_UP BIT(13)
+#define PADCFG1_TERM_SHIFT 10
+#define PADCFG1_TERM_MASK GENMASK(12, 10)
+#define PADCFG1_TERM_20K BIT(2)
+#define PADCFG1_TERM_5K BIT(1)
+#define PADCFG1_TERM_1K BIT(0)
+#define PADCFG1_TERM_833 (BIT(1) | BIT(0))
+
+#define PADCFG2 0x008
+#define PADCFG2_DEBEN BIT(0)
+#define PADCFG2_DEBOUNCE_SHIFT 1
+#define PADCFG2_DEBOUNCE_MASK GENMASK(4, 1)
+
+#define DEBOUNCE_PERIOD_NSEC 31250
+
+/* Additional features supported by the hardware */
+#define PINCTRL_FEATURE_DEBOUNCE BIT(0)
+#define PINCTRL_FEATURE_1K_PD BIT(1)
+
+#define BOARD_UP_CHT01 0
+#define BOARD_UP_APL01 1
+#define BOARD_UP_UPCORE 2
+#define BOARD_UP_CORE_PLUS 3
+#define BOARD_AIOT_IP6801 4
+#define BOARD_UP_WHL01 5
+#define BOARD_UP_ISH 7
+#define BOARD_UPN_APL 8
+#define BOARD_UP_APL03 9
+#define BOARD_UPX_WHLite 10
+#define BOARD_UPX_TGL 11
+#define BOARD_UPX_EDGE_WHL2 12
+#define BOARD_UPN_EHL01 13
+#define BOARD_UPS_EHL01 14
+#define BOARD_UPX_ADLP01 15
+#define BOARD_UPN_ADLN01 16
+#define BOARD_UPS_ADLP01 15
+
+struct upboard_pin {
+ struct regmap_field *funcbit;
+ struct regmap_field *enbit;
+ struct regmap_field *dirbit;
+ /* native pin controllers: number, base, irq */
+ unsigned int gpio;
+ unsigned int base;
+ int irq;
+ void __iomem *regs;
+};
+
+struct upboard_pinctrl {
+ struct gpio_chip chip;
+ struct device *dev;
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_desc *pctldesc;
+ struct upboard_pin *pins;
+ struct regmap *regmap;
+ const unsigned int *rpi_mapping;
+ int ident;
+};
+
+enum upboard_func0_fpgabit {
+ UPFPGA_I2C0_EN = 8,
+ UPFPGA_I2C1_EN = 9,
+ UPFPGA_CEC0_EN = 12,
+ UPFPGA_ADC0_EN = 14,
+};
+
+static const struct reg_field upboard_i2c0_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN);
+
+static const struct reg_field upboard_i2c1_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN);
+
+static const struct reg_field upboard_adc0_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN);
+
+/* Pin group information */
+struct upboard_pingroup {
+ const char *name;
+ const unsigned int *pins;
+ size_t npins;
+};
+
+/* Pin function information */
+struct upboard_function {
+ const char *name;
+ const char * const *groups;
+ size_t ngroups;
+};
+
+#define UPBOARD_BIT_TO_PIN(r, bit) \
+ ((r) * UPFPGA_REGISTER_SIZE + (bit))
+
+/*
+ * UP board data
+ */
+
+#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id))
+
+#define UPBOARD_UP_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ }
+
+#define UPBOARD_UP_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UP_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UP_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UP_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+#define UPBOARD_PIN_GROUP(n, p) \
+ { \
+ .name = (n), \
+ .pins = (p), \
+ .npins = ARRAY_SIZE((p)), \
+ }
+
+#define FUNCTION(n, g) \
+ { \
+ .name = (n), \
+ .groups = (g), \
+ .ngroups = ARRAY_SIZE((g)), \
+ }
+
+enum upboard_up_reg1_fpgabit {
+ UPFPGA_UP_I2C1_SDA,
+ UPFPGA_UP_I2C1_SCL,
+ UPFPGA_UP_ADC0,
+ UPFPGA_UP_GPIO17,
+ UPFPGA_UP_GPIO27,
+ UPFPGA_UP_GPIO22,
+ UPFPGA_UP_SPI_MOSI,
+ UPFPGA_UP_SPI_MISO,
+ UPFPGA_UP_SPI_CLK,
+ UPFPGA_UP_I2C0_SDA,
+ UPFPGA_UP_GPIO5,
+ UPFPGA_UP_GPIO6,
+ UPFPGA_UP_PWM1,
+ UPFPGA_UP_I2S_FRM,
+ UPFPGA_UP_GPIO26,
+ UPFPGA_UP_UART1_TX,
+};
+
+enum upboard_up_reg2_fpgabit {
+ UPFPGA_UP_UART1_RX,
+ UPFPGA_UP_I2S_CLK,
+ UPFPGA_UP_GPIO23,
+ UPFPGA_UP_GPIO24,
+ UPFPGA_UP_GPIO25,
+ UPFPGA_UP_SPI_CS0,
+ UPFPGA_UP_SPI_CS1,
+ UPFPGA_UP_I2C0_SCL,
+ UPFPGA_UP_PWM0,
+ UPFPGA_UP_GPIO16,
+ UPFPGA_UP_I2S_DIN,
+ UPFPGA_UP_I2S_DOUT,
+};
+
+#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17
+#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16
+
+static struct pinctrl_pin_desc upboard_up_pins[] = {
+ UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg),
+ UPBOARD_UP_PIN_NAME(0, UART1_RTS),
+ UPBOARD_UP_PIN_NAME(0, GPIO27),
+ UPBOARD_UP_PIN_NAME(0, GPIO22),
+ UPBOARD_UP_PIN_NAME(0, SPI_MOSI),
+ UPBOARD_UP_PIN_NAME(0, SPI_MISO),
+ UPBOARD_UP_PIN_NAME(0, SPI_CLK),
+ UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UP_PIN_NAME(0, GPIO5),
+ UPBOARD_UP_PIN_NAME(0, GPIO6),
+ UPBOARD_UP_PIN_NAME(0, PWM1),
+ UPBOARD_UP_PIN_NAME(0, I2S_FRM),
+ UPBOARD_UP_PIN_NAME(0, GPIO26),
+ UPBOARD_UP_PIN_NAME(0, UART1_TX),
+ /* register 1 */
+ UPBOARD_UP_PIN_NAME(1, UART1_RX),
+ UPBOARD_UP_PIN_NAME(1, I2S_CLK),
+ UPBOARD_UP_PIN_NAME(1, GPIO23),
+ UPBOARD_UP_PIN_NAME(1, GPIO24),
+ UPBOARD_UP_PIN_NAME(1, GPIO25),
+ UPBOARD_UP_PIN_NAME(1, SPI_CS0),
+ UPBOARD_UP_PIN_NAME(1, SPI_CS1),
+ UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UP_PIN_NAME(1, PWM0),
+ UPBOARD_UP_PIN_NAME(1, UART1_CTS),
+ UPBOARD_UP_PIN_NAME(1, I2S_DIN),
+ UPBOARD_UP_PIN_NAME(1, I2S_DOUT),
+};
+
+static const unsigned int upboard_up_rpi_mapping[] = {
+ UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA),
+ UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL),
+ UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA),
+ UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL),
+ UPBOARD_UP_BIT_TO_PIN(0, ADC0),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO5),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO6),
+ UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1),
+ UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK),
+ UPBOARD_UP_BIT_TO_PIN(1, PWM0),
+ UPBOARD_UP_BIT_TO_PIN(0, PWM1),
+ UPBOARD_UP_BIT_TO_PIN(0, UART1_TX),
+ UPBOARD_UP_BIT_TO_PIN(1, UART1_RX),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO16),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO17),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK),
+ UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO22),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO23),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO24),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO25),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO26),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO27),
+};
+
+static const unsigned int uart1_pins[] = { 14, 15, 16, 17 };
+static const unsigned int uart2_pins[] = { 25, 27 };
+static const unsigned int i2c0_pins[] = { 0, 1 };
+static const unsigned int i2c1_pins[] = { 2, 3 };
+static const unsigned int spi2_pins[] = { 8, 9, 10, 11 };
+static const unsigned int i2s0_pins[] = { 18, 19, 20, 21 };
+static const unsigned int pwm0_pins[] = { 12 };
+static const unsigned int pwm1_pins[] = { 13 };
+static const unsigned int adc0_pins[] = { 4 };
+
+static const struct upboard_pingroup pin_groups[] = {
+ UPBOARD_PIN_GROUP("uart1_grp", uart1_pins),
+ UPBOARD_PIN_GROUP("uart2_grp", uart2_pins),
+ UPBOARD_PIN_GROUP("i2c0_grp", i2c0_pins),
+ UPBOARD_PIN_GROUP("i2c1_grp", i2c1_pins),
+ UPBOARD_PIN_GROUP("spi2_grp", spi2_pins),
+ UPBOARD_PIN_GROUP("i2s0_grp", i2s0_pins),
+ UPBOARD_PIN_GROUP("pwm0_grp", pwm0_pins),
+ UPBOARD_PIN_GROUP("pwm1_grp", pwm1_pins),
+ UPBOARD_PIN_GROUP("adc0_grp", adc0_pins),
+};
+
+static const char * const uart1_groups[] = { "uart1_grp" };
+static const char * const uart2_groups[] = { "uart2_grp" };
+static const char * const i2c0_groups[] = { "i2c0_grp" };
+static const char * const i2c1_groups[] = { "i2c1_grp" };
+static const char * const spi2_groups[] = { "spi2_grp" };
+static const char * const i2s0_groups[] = { "i2s0_grp" };
+static const char * const pwm0_groups[] = { "pwm0_grp" };
+static const char * const pwm1_groups[] = { "pwm1_grp" };
+static const char * const adc0_groups[] = { "adc0_grp" };
+
+static const struct upboard_function pin_functions[] = {
+ FUNCTION("uart1", uart1_groups),
+ FUNCTION("uart2", uart2_groups),
+ FUNCTION("i2c0", i2c0_groups),
+ FUNCTION("i2c1", i2c1_groups),
+ FUNCTION("spi2", spi2_groups),
+ FUNCTION("i2s0", i2s0_groups),
+ FUNCTION("pwm0", pwm0_groups),
+ FUNCTION("pwm1", pwm1_groups),
+ FUNCTION("adc0", adc0_groups),
+};
+
+/*
+ * UP^2 board data
+ */
+
+#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id))
+
+#define UPBOARD_UP2_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ .name = "NONAME", \
+ }
+
+#define UPBOARD_UP2_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UP2_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+enum upboard_up2_reg0_fpgabit {
+ UPFPGA_UP2_UART1_TXD,
+ UPFPGA_UP2_UART1_RXD,
+ UPFPGA_UP2_UART1_RTS,
+ UPFPGA_UP2_UART1_CTS,
+ UPFPGA_UP2_GPIO3,
+ UPFPGA_UP2_GPIO5,
+ UPFPGA_UP2_GPIO6,
+ UPFPGA_UP2_GPIO11,
+ UPFPGA_UP2_EXHAT_LVDS1n,
+ UPFPGA_UP2_EXHAT_LVDS1p,
+ UPFPGA_UP2_SPI2_TXD,
+ UPFPGA_UP2_SPI2_RXD,
+ UPFPGA_UP2_SPI2_FS1,
+ UPFPGA_UP2_SPI2_FS0,
+ UPFPGA_UP2_SPI2_CLK,
+ UPFPGA_UP2_SPI1_TXD,
+};
+
+enum upboard_up2_reg1_fpgabit {
+ UPFPGA_UP2_SPI1_RXD,
+ UPFPGA_UP2_SPI1_FS1,
+ UPFPGA_UP2_SPI1_FS0,
+ UPFPGA_UP2_SPI1_CLK,
+ UPFPGA_UP2_BIT20,
+ UPFPGA_UP2_BIT21,
+ UPFPGA_UP2_BIT22,
+ UPFPGA_UP2_BIT23,
+ UPFPGA_UP2_PWM1,
+ UPFPGA_UP2_PWM0,
+ UPFPGA_UP2_EXHAT_LVDS0n,
+ UPFPGA_UP2_EXHAT_LVDS0p,
+ UPFPGA_UP2_I2C0_SCL,
+ UPFPGA_UP2_I2C0_SDA,
+ UPFPGA_UP2_I2C1_SCL,
+ UPFPGA_UP2_I2C1_SDA,
+};
+
+enum upboard_up2_reg2_fpgabit {
+ UPFPGA_UP2_EXHAT_LVDS3n,
+ UPFPGA_UP2_EXHAT_LVDS3p,
+ UPFPGA_UP2_EXHAT_LVDS4n,
+ UPFPGA_UP2_EXHAT_LVDS4p,
+ UPFPGA_UP2_EXHAT_LVDS5n,
+ UPFPGA_UP2_EXHAT_LVDS5p,
+ UPFPGA_UP2_I2S_SDO,
+ UPFPGA_UP2_I2S_SDI,
+ UPFPGA_UP2_I2S_WS_SYNC,
+ UPFPGA_UP2_I2S_BCLK,
+ UPFPGA_UP2_EXHAT_LVDS6n,
+ UPFPGA_UP2_EXHAT_LVDS6p,
+ UPFPGA_UP2_EXHAT_LVDS7n,
+ UPFPGA_UP2_EXHAT_LVDS7p,
+ UPFPGA_UP2_EXHAT_LVDS2n,
+ UPFPGA_UP2_EXHAT_LVDS2p,
+};
+
+static struct pinctrl_pin_desc upboard_up2_pins[] = {
+ UPBOARD_UP2_PIN_NAME(0, UART1_TXD),
+ UPBOARD_UP2_PIN_NAME(0, UART1_RXD),
+ UPBOARD_UP2_PIN_NAME(0, UART1_RTS),
+ UPBOARD_UP2_PIN_NAME(0, UART1_CTS),
+ UPBOARD_UP2_PIN_NAME(0, GPIO3),
+ UPBOARD_UP2_PIN_NAME(0, GPIO5),
+ UPBOARD_UP2_PIN_NAME(0, GPIO6),
+ UPBOARD_UP2_PIN_NAME(0, GPIO11),
+ UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n),
+ UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_TXD),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_RXD),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_FS1),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_FS0),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_CLK),
+ UPBOARD_UP2_PIN_NAME(0, SPI1_TXD),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_RXD),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_FS1),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_FS0),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_CLK),
+ UPBOARD_UP2_PIN_ANON(1, 4),
+ UPBOARD_UP2_PIN_ANON(1, 5),
+ UPBOARD_UP2_PIN_ANON(1, 6),
+ UPBOARD_UP2_PIN_ANON(1, 7),
+ UPBOARD_UP2_PIN_NAME(1, PWM1),
+ UPBOARD_UP2_PIN_NAME(1, PWM0),
+ UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n),
+ UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p),
+ UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p),
+ UPBOARD_UP2_PIN_NAME(2, I2S_SDO),
+ UPBOARD_UP2_PIN_NAME(2, I2S_SDI),
+ UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC),
+ UPBOARD_UP2_PIN_NAME(2, I2S_BCLK),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p),
+};
+
+static const unsigned int upboard_up2_rpi_mapping[] = {
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO3),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO11),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK),
+ UPBOARD_UP2_BIT_TO_PIN(1, PWM0),
+ UPBOARD_UP2_BIT_TO_PIN(1, PWM1),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO6),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO5),
+};
+
+/*
+ * UP Core board + CREX carrier board data
+ */
+
+#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \
+ (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id))
+
+#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ }
+
+#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+enum upboard_upcore_crex_reg1_fpgabit {
+ UPFPGA_UPCORE_CREX_I2C0_SDA,
+ UPFPGA_UPCORE_CREX_I2C0_SCL,
+ UPFPGA_UPCORE_CREX_I2C1_SDA,
+ UPFPGA_UPCORE_CREX_I2C1_SCL,
+ UPFPGA_UPCORE_CREX_SPI2_CS0,
+ UPFPGA_UPCORE_CREX_SPI2_CS1,
+ UPFPGA_UPCORE_CREX_SPI2_MOSI,
+ UPFPGA_UPCORE_CREX_SPI2_MISO,
+ UPFPGA_UPCORE_CREX_SPI2_CLK,
+ UPFPGA_UPCORE_CREX_UART1_TXD,
+ UPFPGA_UPCORE_CREX_UART1_RXD,
+ UPFPGA_UPCORE_CREX_PWM0,
+ UPFPGA_UPCORE_CREX_PWM1,
+ UPFPGA_UPCORE_CREX_I2S2_FRM,
+ UPFPGA_UPCORE_CREX_I2S2_CLK,
+ UPFPGA_UPCORE_CREX_I2S2_RX,
+};
+
+enum upboard_upcore_crex_reg2_fpgabit {
+ UPFPGA_UPCORE_CREX_I2S2_TX,
+ UPFPGA_UPCORE_CREX_GPIO0,
+ UPFPGA_UPCORE_CREX_GPIO2,
+ UPFPGA_UPCORE_CREX_GPIO3,
+ UPFPGA_UPCORE_CREX_GPIO4,
+ UPFPGA_UPCORE_CREX_GPIO9,
+};
+
+static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = {
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX),
+ /* register 1 */
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9),
+};
+
+static unsigned int upboard_upcore_crex_rpi_mapping[] = {
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX),
+};
+
+/*
+ * UP Core board + CRST02 carrier board data
+ */
+
+#define upboard_upcore_crst02_pins upboard_upcore_crex_pins
+#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping
+
+static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
+ unsigned int group)
+{
+ return 0;
+}
+
+static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int pin)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+ int ret;
+
+ p = pd->drv_data;
+ if (p->funcbit) {
+ ret = regmap_field_write(p->funcbit, 0);
+ if (ret)
+ return ret;
+ }
+
+ if (p->enbit) {
+ ret = regmap_field_write(p->enbit, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int upboard_fpga_request_free(struct pinctrl_dev *pctldev,
+ unsigned int pin)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+ int ret;
+
+ p = pd->drv_data;
+ if (p->funcbit) {
+ ret = regmap_field_write(p->funcbit, 1);
+ if (ret)
+ return ret;
+ }
+
+ if (p->enbit) {
+ ret = regmap_field_write(p->enbit, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int pin, bool input)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+
+ p = pd->drv_data;
+ upboard_fpga_request_enable(pctldev, range, pin);
+
+ return regmap_field_write(p->dirbit, input);
+}
+
+static int upboard_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return 0;
+}
+
+static const char *upboard_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return NULL;
+}
+
+static int upboard_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const char * const **groups,
+ unsigned int *num_groups)
+{
+ *groups = NULL;
+ *num_groups = 0;
+ return 0;
+}
+
+static const struct pinmux_ops upboard_pinmux_ops = {
+ .get_functions_count = upboard_get_functions_count,
+ .get_function_groups = upboard_get_function_groups,
+ .get_function_name = upboard_get_function_name,
+ .set_mux = upboard_set_mux,
+ .gpio_request_enable = upboard_fpga_request_enable,
+ .gpio_set_direction = upboard_fpga_set_direction,
+};
+
+static int upboard_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return 0;
+}
+
+static const char *upboard_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return NULL;
+}
+
+static const struct pinctrl_ops upboard_pinctrl_ops = {
+ .get_groups_count = upboard_get_groups_count,
+ .get_group_name = upboard_get_group_name,
+};
+
+static struct pinctrl_desc upboard_up_pinctrl_desc = {
+ .pins = upboard_up_pins,
+ .npins = ARRAY_SIZE(upboard_up_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_up2_pinctrl_desc = {
+ .pins = upboard_up2_pins,
+ .npins = ARRAY_SIZE(upboard_up2_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = {
+ .pins = upboard_upcore_crex_pins,
+ .npins = ARRAY_SIZE(upboard_upcore_crex_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = {
+ .pins = upboard_upcore_crst02_pins,
+ .npins = ARRAY_SIZE(upboard_upcore_crst02_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name, int id)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int offset[pctrl->pctldesc->npins];
+ int i, cnt;
+
+ /* find all pins */
+ for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) {
+ if (strstr(pctrl->pctldesc->pins[i].name, name))
+ offset[cnt++] = i;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ if (pinctrl_gpio_request(pctrl->pins[offset[i]].gpio))
+ return; /* this pin is being used */
+
+ pinctrl_gpio_free(pctrl->pins[offset[i]].gpio);
+ }
+
+ /* change to alternate function */
+ for (i = 0; i < cnt; i++) {
+ if (pctrl->pins[offset[i]].regs == NULL)
+ continue;
+ bool input = false;
+ int mode = 1; /* default */
+ unsigned int val = readl(pctrl->pins[offset[i]].regs);
+
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C")) {
+ switch (id) {
+ case BOARD_UPN_ADLN01:
+ case BOARD_UPX_ADLP01:
+ mode = 2;
+ break;
+ default:
+ break;
+ }
+ val |= mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ upboard_fpga_request_free(pctrl->pctldev, offset[i]);
+ continue;
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, "UART")) {
+ switch (id) {
+ case BOARD_UPN_EHL01:
+ case BOARD_UPS_EHL01:
+ mode = 4;
+ break;
+ case BOARD_UPN_ADLN01:
+ case BOARD_UPX_ADLP01:
+ mode = 2;
+ break;
+ default:
+ break;
+ }
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SPI")) {
+ switch (id) {
+ case BOARD_UP_WHL01:
+ mode = 3;
+ break;
+ case BOARD_UPN_ADLN01:
+ case BOARD_UPX_ADLP01:
+ mode = 7;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MOSI")) {
+ val &= ~PADCFG0_GPIOTXDIS;
+ val |= PADCFG0_GPIORXDIS;
+ }
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) {
+ val |= PADCFG0_GPIORXDIS;
+ }
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CLK")) {
+ val &= ~PADCFG0_GPIOTXDIS;
+ val |= PADCFG0_GPIORXDIS;
+ }
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS0")) {
+ val |= PADCFG0_GPIORXDIS;
+ }
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS1")) {
+ continue;
+ }
+ break;
+ default:
+ break;
+ }
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2S")) {
+ switch (id) {
+ case BOARD_UPX_ADLP01:
+ mode = 4;
+ break;
+ default:
+ break;
+ }
+ }
+ val |= mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+
+ /* input pins */
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SDI"))
+ input = true;
+ upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i], input);
+ }
+}
+
+static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[gpio];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ if (!range)
+ return -ENODEV;
+
+ return range->base;
+}
+
+static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ return pinctrl_gpio_request(gpio);
+}
+
+static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ char name[strlen(pctrl->pctldesc->pins[pin].name)];
+ char *p;
+
+ pinctrl_gpio_free(gpio);
+
+ strcpy(name, pctrl->pctldesc->pins[pin].name);
+ p = name;
+ upboard_alt_func_enable(gc, strsep(&p, "_"), pctrl->ident);
+}
+
+static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ return gpiod_get_value(gpio_to_desc(gpio));
+}
+
+static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset,
+ int value)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ gpiod_set_value(gpio_to_desc(gpio), value);
+
+ /* APL03 board open drain GPIO */
+ if (pctrl->ident == BOARD_UP_APL03) {
+ if (pin == 0 || pin == 1) {
+ int val = readl(pctrl->pins[pin].regs);
+
+ if (value)
+ val |= PADCFG0_GPIOTXDIS;
+ else
+ val &= ~PADCFG0_GPIOTXDIS;
+
+ writel(val, pctrl->pins[pin].regs);
+ }
+ }
+}
+
+static int upboard_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ upboard_fpga_set_direction(pctrl->pctldev, range, pin, true);
+
+ return gpiod_direction_input(gpio_to_desc(gpio));
+}
+
+static int upboard_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ upboard_fpga_set_direction(pctrl->pctldev, range, pin, false);
+
+ return gpiod_direction_output(gpio_to_desc(gpio), value);
+}
+
+static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int gpio, unsigned int reg)
+{
+ struct platform_device *pdev = to_platform_device(gc->parent);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+ size_t nregs;
+ void __iomem *base = NULL;
+ u32 offset, value;
+ int pin = gpio-gc->base;
+
+ /* check Intel pin controller for all platform */
+ if (pctrl->ncommunities > 1) {
+ int i, j, offset = 0;
+
+ pin = -1;
+ for (i = 0; i < pctrl->ncommunities; i++) {
+ struct intel_community *community = &pctrl->communities[i];
+
+ for (j = 0; j < community->ngpps ; j++) {
+ struct intel_padgroup gpps = community->gpps[j];
+
+ if (gpio < gc->base + gpps.gpio_base + gpps.size) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ community->barno);
+ pin = gpio-gc->base-gpps.gpio_base +
+ offset-community->pin_base;
+ break;
+ }
+
+ offset += gpps.size;
+ }
+
+ if (pin != -1)
+ break;
+ }
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (base == NULL)
+ return base;
+
+ offset = readl(base + PADBAR);
+ value = readl(base + REVID);
+
+ if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94)
+ nregs = 4;
+ else
+ nregs = 2;
+
+ return base + offset + reg + pin * nregs * 4;
+}
+
+int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga,
+ struct upboard_pinctrl *pctrl,
+ const char *propname,
+ const char *pinctl_name,
+ unsigned int pin_offset)
+{
+ struct gpio_descs *descs;
+ int ret, i;
+
+ descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS);
+ if (IS_ERR(descs)) {
+ ret = PTR_ERR(descs);
+ if (ret != -EPROBE_DEFER)
+ dev_err(fpga->dev, "Failed to get %s gpios", propname);
+
+ return ret;
+ }
+
+ for (i = 0; i < descs->ndescs; i++) {
+ struct gpio_desc *desc = descs->desc[i];
+ struct gpio_chip *gc = gpiod_to_chip(desc);
+
+ pctrl->pins[i].gpio = desc_to_gpio(desc);
+ pctrl->pins[i].base = gc->base;
+ pctrl->pins[i].irq = gpiod_to_irq(desc);
+ pctrl->pins[i].regs =
+ upboard_get_regs(gc,
+ desc_to_gpio(desc) - gc->base,
+ PADCFG0);
+
+ /* The GPIOs may not be contiguous, so add them 1-by-1 */
+ ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name,
+ desc_to_gpio(desc) - gc->base,
+ pin_offset + i, 1);
+ if (ret)
+ return ret;
+ }
+
+ /* dispose acpi resource */
+ devm_gpiod_put_array(fpga->dev, descs);
+
+ return ret;
+}
+
+static struct gpio_chip upboard_gpio_chip = {
+ .label = "Raspberry Pi compatible UP GPIO",
+ .base = 0,
+ .request = upboard_gpio_request,
+ .free = upboard_gpio_free,
+ .get = upboard_gpio_get,
+ .set = upboard_gpio_set,
+ .direction_input = upboard_gpio_direction_input,
+ .direction_output = upboard_gpio_direction_output,
+ .owner = THIS_MODULE,
+};
+
+/* DMI Matches for older bios without fpga initialization */
+static const struct dmi_system_id upboard_dmi_table[] __initconst = {
+ {
+ .ident = BOARD_UP_APL03,
+ .matches = { /* UP 4000 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"),
+ },
+ },
+ {
+ .ident = BOARD_UP_WHL01,
+ .matches = { /* UPX WHL */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"),
+ },
+ },
+ {
+ .ident = BOARD_UPX_TGL,
+ .matches = { /* UP i11 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"),
+ },
+ },
+ {
+ .ident = BOARD_UPN_EHL01,
+ .matches = { /* UP 6000 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"),
+ },
+ },
+ {
+ .ident = BOARD_UPS_EHL01,
+ .matches = { /* UP squared v2 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"),
+ },
+ },
+ {
+ .ident = BOARD_UPX_ADLP01,
+ .matches = { /* UP Xtreme i12 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"),
+ },
+ },
+ {
+ .ident = BOARD_UPN_ADLN01,
+ .matches = { /* UP 7000 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-ADLN01"),
+ },
+ },
+ {
+ .ident = BOARD_UPS_ADLP01,
+ .matches = { /* UP Squared i12 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-ADLP01"),
+ },
+ },
+ { } /* Terminating entry */
+};
+
+static int __init upboard_pinctrl_probe(struct platform_device *pdev)
+{
+ struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent);
+ struct acpi_device * const adev = ACPI_COMPANION(&pdev->dev);
+ struct pinctrl_desc *pctldesc;
+ struct upboard_pinctrl *pctrl;
+ struct upboard_pin *pins;
+ const struct dmi_system_id *system_id;
+ const char *hid;
+ const unsigned int *rpi_mapping;
+ unsigned int ngpio;
+ int ret;
+ int i;
+
+ if (!fpga)
+ return -EINVAL;
+
+ if (!adev)
+ return -ENODEV;
+
+ /* set pin desc and rpi GPIO mapping table by HID */
+ hid = acpi_device_hid(adev);
+ if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") ||
+ !strcmp(hid, "AANT0000")) {
+ pctldesc = &upboard_up_pinctrl_desc;
+ rpi_mapping = upboard_up_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_up_rpi_mapping);
+ } else if (!strcmp(hid, "AANT0F01")) {
+ pctldesc = &upboard_up2_pinctrl_desc;
+ rpi_mapping = upboard_up2_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping);
+ } else if (!strcmp(hid, "AANT0F02")) {
+ pctldesc = &upboard_upcore_crex_pinctrl_desc;
+ rpi_mapping = upboard_upcore_crex_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping);
+ } else if (!strcmp(hid, "AANT0F03")) {
+ pctldesc = &upboard_upcore_crst02_pinctrl_desc;
+ rpi_mapping = upboard_upcore_crst02_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping);
+ } else
+ return -ENODEV;
+
+ pctldesc->name = dev_name(&pdev->dev);
+
+ pins = devm_kcalloc(&pdev->dev, pctldesc->npins, sizeof(*pins), GFP_KERNEL);
+ if (!pins)
+ return -ENOMEM;
+
+ /* initialise pins */
+ for (i = 0; i < pctldesc->npins; i++) {
+ struct upboard_pin *pin = &pins[i];
+ struct pinctrl_pin_desc *pd = (struct pinctrl_pin_desc *) &pctldesc->pins[i];
+ struct reg_field fldconf = {0};
+ unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE);
+ unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE;
+
+ pin->funcbit = NULL;
+
+ if (pd->drv_data) {
+ fldconf = *(struct reg_field *)pd->drv_data;
+
+ pin->funcbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->funcbit))
+ return PTR_ERR(pin->funcbit);
+ }
+
+ pin->enbit = NULL;
+ fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff;
+ fldconf.lsb = lsb;
+ fldconf.msb = lsb;
+
+ pin->enbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->enbit))
+ return PTR_ERR(pin->enbit);
+
+ fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff;
+ fldconf.lsb = lsb;
+ fldconf.msb = lsb;
+
+ pin->dirbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->dirbit))
+ return PTR_ERR(pin->dirbit);
+
+ pd->drv_data = pin;
+
+ /* set output by default */
+ regmap_field_write(pin->dirbit, false);
+ }
+
+ /* create a new pinctrl device and register it */
+ pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+ if (!pctrl)
+ return -ENOMEM;
+
+ pctrl->regmap = fpga->regmap;
+ pctrl->rpi_mapping = rpi_mapping;
+ pctrl->chip = upboard_gpio_chip;
+ pctrl->pctldesc = pctldesc;
+ pctrl->chip.parent = &pdev->dev;
+ pctrl->chip.ngpio = ngpio;
+ pctrl->pins = pins;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl);
+ if (ret)
+ return ret;
+
+ pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl);
+ if (IS_ERR(pctrl->pctldev))
+ return PTR_ERR(pctrl->pctldev);
+
+ /* add acpi pin mapping according to external-gpios key */
+ ret = upboard_acpi_node_pin_mapping(fpga, pctrl,
+ "external",
+ dev_name(&pdev->dev),
+ 0);
+ if (ret)
+ return ret;
+
+ /* check for special board versions that require register patches */
+ system_id = dmi_first_match(upboard_dmi_table);
+ if (system_id)
+ pctrl->ident = system_id->ident;
+ else
+ pctrl->ident = BOARD_UP_APL03;
+
+ upboard_alt_func_enable(&pctrl->chip, "I2C", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "SPI", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "SPI1", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "SPI2", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "UART", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "I2S", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "PWM", pctrl->ident);
+ upboard_alt_func_enable(&pctrl->chip, "ADC", pctrl->ident);
+ /* I2C pin mux by CPLD in UP2 */
+ upboard_alt_func_enable(&pctrl->chip, "NONAME", pctrl->ident);
+
+ return ret;
+}
+
+static struct platform_driver upboard_pinctrl_driver = {
+ .driver = {
+ .name = "upboard-pinctrl",
+ },
+};
+module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe);
+
+MODULE_AUTHOR("Gary Wang <[email protected]>");
+MODULE_DESCRIPTION("UP Board HAT pin controller driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:upboard-pinctrl");
--
2.17.1
The UP boards come with a few FPGA-controlled onboard LEDs:
* UP Board: yellow, green, red
* UP Squared: blue, yellow, green, red
This patch depends on patch "mfd: Add support for UP board CPLD/FPGA".
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Lee Jones <[email protected]>
Signed-off-by: larry.lai <[email protected]>
---
RFC 2022/11/23 --> RFC 2023/04/25: Refer 2022/12/08 Lee Jones review,
cleaned up coding style.
PATCH V3 -> RFC 2022/11/23: Update the changes Copyright.
PATCH V1 -> V3: There is no change.
PATCH --> PATCH V1: Refer 2022/10/03 Andy Shevchenko review, cleaned up
coding style.
---
---
drivers/leds/Kconfig | 10 +++++
drivers/leds/Makefile | 1 +
drivers/leds/leds-upboard.c | 79 +++++++++++++++++++++++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 drivers/leds/leds-upboard.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 499d0f215a8b..d9d533cb38ca 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -872,6 +872,16 @@ source "drivers/leds/flash/Kconfig"
comment "RGB LED drivers"
source "drivers/leds/rgb/Kconfig"
+config LEDS_UPBOARD
+ tristate "LED support for the UP board"
+ depends on LEDS_CLASS
+ depends on MFD_INTEL_UPBOARD_FPGA
+ help
+ This option enables support for the UP board LEDs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called leds-upboard.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4fd2f92cd198..e72956645646 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o
obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o
+obj-$(CONFIG_LEDS_UPBOARD) += leds-upboard.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c
new file mode 100644
index 000000000000..8a44afe8c526
--- /dev/null
+++ b/drivers/leds/leds-upboard.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board CPLD/FPGA based LED driver
+ *
+ * Copyright (c) AAEON. All rights reserved.
+ *
+ * Author: Gary Wang <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct upboard_led {
+ struct regmap_field *field;
+ struct led_classdev cdev;
+ unsigned char bit;
+};
+
+static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev)
+{
+ struct upboard_led *led = container_of(cdev, struct upboard_led, cdev);
+ int brightness = 0;
+
+ regmap_field_read(led->field, &brightness);
+
+ return brightness;
+};
+
+static void upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness)
+{
+ struct upboard_led *led = container_of(cdev, struct upboard_led, cdev);
+
+ regmap_field_write(led->field, brightness != LED_OFF);
+};
+
+static int __init upboard_led_probe(struct platform_device *pdev)
+{
+ struct upboard_fpga * const up_fpga = dev_get_drvdata(pdev->dev.parent);
+ struct reg_field fldconf = {
+ .reg = UPFPGA_REG_FUNC_EN0,
+ };
+ struct upboard_led_data * const pdata = pdev->dev.platform_data;
+ struct upboard_led *led;
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ fldconf.lsb = pdata->bit;
+ fldconf.msb = pdata->bit;
+ led->field = devm_regmap_field_alloc(&pdev->dev, up_fpga->regmap, fldconf);
+ if (IS_ERR(led->field))
+ return PTR_ERR(led->field);
+
+ led->cdev.brightness_get = upboard_led_brightness_get;
+ led->cdev.brightness_set = upboard_led_brightness_set;
+ led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:",
+ pdata->colour);
+ if (!led->cdev.name)
+ return -ENOMEM;
+
+ return devm_led_classdev_register(&pdev->dev, &led->cdev);
+};
+
+static struct platform_driver upboard_led_driver = {
+ .driver = {
+ .name = "upboard-led",
+ },
+};
+module_platform_driver_probe(upboard_led_driver, upboard_led_probe);
+
+MODULE_AUTHOR("Gary Wang <[email protected]>");
+MODULE_DESCRIPTION("UP Board LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:upboard-led");
--
2.17.1
On Tue, 25 Apr 2023, larry.lai wrote:
> The UP Squared board <http://www.upboard.com> implements certain
> features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA.
>
> This mfd driver implements the line protocol to read and write registers
> from the FPGA through regmap. The register address map is also included.
>
> The UP Boards provide a few I/O pin headers (for both GPIO and
> functions), including a 40-pin Raspberry Pi compatible header.
>
> This patch implements support for the FPGA-based pin controller that
> manages direction and enable state for those header pins.
>
> Partial support UP boards:
> * UP core + CREX
> * UP core + CRST02
>
> Signed-off-by: Javier Arteaga <[email protected]>
> [merge various fixes]
> Signed-off-by: Nicola Lunghi <[email protected]>
> Reviewed-by: Lee Jones <[email protected]>
> Reviewed-by: Andy Shevchenko <[email protected]>
Wait, what?!
When did Andy or I provide you with Reviewed-by tags?
You must to apply any tag that isn't explicitly provided to you.
> Signed-off-by: larry.lai <[email protected]>
> ---
> RFC 2022/11/23 -> RFC 2023/04/25
> (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style
> and addressed review comments.
> PATCH V3 -> RFC 2022/11/23:
> (1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and
> addressed review comments.
> (2) Description on the UP Boards FPGA register read/write protocols
> PATCH V2 -> V3:
> (1) fixed kernel test robot compiler warning
> PATCH V1 -> V2:
> (1) Synchronizing upboard github to rc2
> (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues.
> ---
> ---
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/upboard-fpga.c | 527 +++++++++++++++++++++++++++++++
> include/linux/mfd/upboard-fpga.h | 61 ++++
> 4 files changed, 601 insertions(+)
> create mode 100644 drivers/mfd/upboard-fpga.c
> create mode 100644 include/linux/mfd/upboard-fpga.h
I'm not even going to try and review this (again).
Looking at the subject line, this is patch is masquerading as a RESEND
of an unreviewed v1. However, at best this is a RESEND of a reviewed
(which was ignored) v3, perhaps even just a straight v4.
Either way, it appears as though the review comments you received in v3
were ignored. Please go back and fix those before submitting v5,
thanks.
--
Lee Jones [李琼斯]
On Tue, 25 Apr 2023, larry.lai wrote:
> The UP boards come with a few FPGA-controlled onboard LEDs:
> * UP Board: yellow, green, red
> * UP Squared: blue, yellow, green, red
>
> This patch depends on patch "mfd: Add support for UP board CPLD/FPGA".
>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Lee Jones <[email protected]>
Definitely not. Please try again after reading:
Documentation/process/submitting-patches.rst
> Signed-off-by: larry.lai <[email protected]>
> ---
> RFC 2022/11/23 --> RFC 2023/04/25: Refer 2022/12/08 Lee Jones review,
> cleaned up coding style.
> PATCH V3 -> RFC 2022/11/23: Update the changes Copyright.
> PATCH V1 -> V3: There is no change.
> PATCH --> PATCH V1: Refer 2022/10/03 Andy Shevchenko review, cleaned up
> coding style.
> ---
> ---
> drivers/leds/Kconfig | 10 +++++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-upboard.c | 79 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 90 insertions(+)
> create mode 100644 drivers/leds/leds-upboard.c
--
Lee Jones [李琼斯]