The device_for_each_child_node() loop in
bgx_init_of_phy() function should have
wnode_handle_put() before break
which could avoid resource leaks.
This patch could fix this bug.
Signed-off-by: Wang Ming <[email protected]>
---
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index a317feb8decb..dad32d36a015 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -1478,8 +1478,10 @@ static int bgx_init_of_phy(struct bgx *bgx)
* cannot handle it, so exit the loop.
*/
node = to_of_node(fwn);
- if (!node)
+ if (!node) {
+ fwnode_handle_put(fwn);
break;
+ }
of_get_mac_address(node, bgx->lmac[lmac].mac);
@@ -1503,6 +1505,7 @@ static int bgx_init_of_phy(struct bgx *bgx)
lmac++;
if (lmac == bgx->max_lmac) {
of_node_put(node);
+ fwnode_handle_put(fwn);
break;
}
}
--
2.25.1
On Wed, Jul 05, 2023 at 10:34:56PM +0800, Wang Ming wrote:
> The device_for_each_child_node() loop in
> bgx_init_of_phy() function should have
> wnode_handle_put() before break
> which could avoid resource leaks.
> This patch could fix this bug.
It is very strange typographic. You have ~80 chars per-line, while your
longest line is 40 chars only.
>
> Signed-off-by: Wang Ming <[email protected]>
> ---
> drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> index a317feb8decb..dad32d36a015 100644
> --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> @@ -1478,8 +1478,10 @@ static int bgx_init_of_phy(struct bgx *bgx)
> * cannot handle it, so exit the loop.
> */
> node = to_of_node(fwn);
> - if (!node)
> + if (!node) {
> + fwnode_handle_put(fwn);
> break;
> + }
>
> of_get_mac_address(node, bgx->lmac[lmac].mac);
>
> @@ -1503,6 +1505,7 @@ static int bgx_init_of_phy(struct bgx *bgx)
> lmac++;
> if (lmac == bgx->max_lmac) {
> of_node_put(node);
> + fwnode_handle_put(fwn);
> break;
> }
> }
> --
> 2.25.1
>
>
On 2023-07-05 22:34 +0800, Wang Ming wrote:
> The device_for_each_child_node() loop in
> bgx_init_of_phy() function should have
> wnode_handle_put() before break
^
fwnode_handle_put()
> which could avoid resource leaks.
> This patch could fix this bug.
>
> Signed-off-by: Wang Ming <[email protected]>
> ---
> drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> index a317feb8decb..dad32d36a015 100644
> --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
> @@ -1478,8 +1478,10 @@ static int bgx_init_of_phy(struct bgx *bgx)
> * cannot handle it, so exit the loop.
> */
> node = to_of_node(fwn);
> - if (!node)
> + if (!node) {
> + fwnode_handle_put(fwn);
> break;
> + }
Fixes: eee326fd8334 ("net: thunderx: bgx: Use standard firmware node infrastructure.")
?
>
> of_get_mac_address(node, bgx->lmac[lmac].mac);
>
> @@ -1503,6 +1505,7 @@ static int bgx_init_of_phy(struct bgx *bgx)
> lmac++;
> if (lmac == bgx->max_lmac) {
> of_node_put(node);
> + fwnode_handle_put(fwn);
\ fwnode_handle_put
\ of_fwnode_put
of_node_put(to_of_node(fwnode));
With your patch, there are now two references released on 'node' (two
of_node_put(node) calls).
One reference is from device_for_each_child_node(), where was the other
reference taken?