This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
am335x-evmsk, and am335x-icev2. This USB port is mainly used for
RNDIS and DFU.
Initially, a series was submitted to overlay dr_mode in u-boot specific
device trees ('<board>-u-boot.dtsi'):
https://lore.kernel.org/all/[email protected]/
It was finally decided to modify linux device trees.
Signed-off-by: Julien Panis <[email protected]>
---
Julien Panis (3):
ARM: dts: am335x-evm: Use usb0 as peripheral
ARM: dts: am335x-evmsk: Use usb0 as peripheral
ARM: dts: am335x-icev2: Use usb0 as peripheral
arch/arm/boot/dts/am335x-evm.dts | 4 ++++
arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++
arch/arm/boot/dts/am335x-icev2.dts | 4 ++++
3 files changed, 12 insertions(+)
---
base-commit: 3a8a670eeeaa40d87bd38a587438952741980c18
change-id: 20230629-usb0-as-peripheral-15afa04c2185
Best regards,
--
Julien Panis <[email protected]>
This patch configures usb0 dr_mode as peripheral.
This USB port is mainly used for RNDIS and DFU.
Signed-off-by: Julien Panis <[email protected]>
---
arch/arm/boot/dts/am335x-evm.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5beabaa5ff6a..75450458bcb8 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -411,6 +411,10 @@ tps: tps@2d {
};
};
+&usb0 {
+ dr_mode = "peripheral";
+};
+
&usb1 {
dr_mode = "host";
};
--
2.37.3
This patch configures usb0 dr_mode as peripheral.
This USB port is mainly used for RNDIS and DFU.
Signed-off-by: Julien Panis <[email protected]>
---
arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 5b3278c0c46a..03300bf45cdd 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -503,6 +503,10 @@ tlv320aic3106: tlv320aic3106@1b {
};
};
+&usb0 {
+ dr_mode = "peripheral";
+};
+
&usb1 {
dr_mode = "host";
};
--
2.37.3
This patch configures usb0 dr_mode as peripheral.
This USB port is mainly used for RNDIS and DFU.
Signed-off-by: Julien Panis <[email protected]>
---
arch/arm/boot/dts/am335x-icev2.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 5835c0cdda50..203e374676d3 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -360,6 +360,10 @@ adc {
};
};
+&usb0 {
+ dr_mode = "peripheral";
+};
+
#include "tps65910.dtsi"
&tps {
--
2.37.3
Hi,
* Julien Panis <[email protected]> [230629 13:10]:
> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
> RNDIS and DFU.
Is this a mini-B connector? Just wondering if it was originally attempted
to be configured as OTG or how it ended up with a host configuration..
> Initially, a series was submitted to overlay dr_mode in u-boot specific
> device trees ('<board>-u-boot.dtsi'):
> https://lore.kernel.org/all/[email protected]/
>
> It was finally decided to modify linux device trees.
Do we need these as fixes? If so is there a fixes tag for these?
Regards,
Tony
Hello Tony,
On 6/30/23 09:20, Tony Lindgren wrote:
> Hi,
>
> * Julien Panis <[email protected]> [230629 13:10]:
>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>> RNDIS and DFU.
> Is this a mini-B connector? Just wondering if it was originally attempted
> to be configured as OTG or how it ended up with a host configuration..
It's a micro USB-AB connector.
I don't know how it ended up with a host configuration, it looks like an oversight.
Maybe Vignesh or Nishanth can confirm (?)
>
>> Initially, a series was submitted to overlay dr_mode in u-boot specific
>> device trees ('<board>-u-boot.dtsi'):
>> https://lore.kernel.org/all/[email protected]/
>>
>> It was finally decided to modify linux device trees.
> Do we need these as fixes? If so is there a fixes tag for these?
I don't think so.
The u-boot series mentioned above was submitted to fix an error returned
by usb_ether_init() function. This error appeared after changes in u-boot
(arch/arm/mach-omap2/am33xx/board.c). The u-boot commit is:
6815a66ad7430 ("am33xx: musb: Remove unused configuration logic").
But this commit is right actually, and the error appeared because dr_mode
was not properly configured for am335x-evmsk and am335x-icev2 dts.
In other words, this u-boot commit is correct but revealed an oversight
in dr_mode configuration for these boards.
So, there is not a fixes tag here. That was just an omission in device trees.
>
> Regards,
>
> Tony
Julien
Hi,
On 30/06/2023 11:30, Julien Panis wrote:
> Hello Tony,
>
> On 6/30/23 09:20, Tony Lindgren wrote:
>> Hi,
>>
>> * Julien Panis <[email protected]> [230629 13:10]:
>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>> RNDIS and DFU.
>> Is this a mini-B connector? Just wondering if it was originally attempted
>> to be configured as OTG or how it ended up with a host configuration..
>
> It's a micro USB-AB connector.
> I don't know how it ended up with a host configuration, it looks like an oversight.
> Maybe Vignesh or Nishanth can confirm (?)
usb0 role should be "otg".
It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
So I don't think setting it to "peripheral" in u-boot is the right thing to do.
>
>>
>>> Initially, a series was submitted to overlay dr_mode in u-boot specific
>>> device trees ('<board>-u-boot.dtsi'):
>>> https://lore.kernel.org/all/[email protected]/
>>>
>>> It was finally decided to modify linux device trees.
>> Do we need these as fixes? If so is there a fixes tag for these?
>
> I don't think so.
> The u-boot series mentioned above was submitted to fix an error returned
> by usb_ether_init() function. This error appeared after changes in u-boot
> (arch/arm/mach-omap2/am33xx/board.c). The u-boot commit is:
> 6815a66ad7430 ("am33xx: musb: Remove unused configuration logic").
> But this commit is right actually, and the error appeared because dr_mode
> was not properly configured for am335x-evmsk and am335x-icev2 dts.
> In other words, this u-boot commit is correct but revealed an oversight
> in dr_mode configuration for these boards.
> So, there is not a fixes tag here. That was just an omission in device trees.
>
>>
>> Regards,
>>
>> Tony
>
> Julien
>
--
cheers,
-roger
On 6/30/23 21:40, Roger Quadros wrote:
> Hi,
>
> On 30/06/2023 11:30, Julien Panis wrote:
>> Hello Tony,
>>
>> On 6/30/23 09:20, Tony Lindgren wrote:
>>> Hi,
>>>
>>> * Julien Panis <[email protected]> [230629 13:10]:
>>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>>> RNDIS and DFU.
>>> Is this a mini-B connector? Just wondering if it was originally attempted
>>> to be configured as OTG or how it ended up with a host configuration..
>> It's a micro USB-AB connector.
>> I don't know how it ended up with a host configuration, it looks like an oversight.
>> Maybe Vignesh or Nishanth can confirm (?)
> usb0 role should be "otg".
> It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
>
> So I don't think setting it to "peripheral" in u-boot is the right thing to do.
This series is for kernel (not for u-boot).
Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
No USB device found
USB ether init failed
initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
### ERROR ### Please RESET the board ###
This error is also returned with usb0 as 'otg'.
Julien Panis
On 03/07/2023 14:56, Julien Panis wrote:
> On 6/30/23 21:40, Roger Quadros wrote:
>> Hi,
>>
>> On 30/06/2023 11:30, Julien Panis wrote:
>>> Hello Tony,
>>>
>>> On 6/30/23 09:20, Tony Lindgren wrote:
>>>> Hi,
>>>>
>>>> * Julien Panis <[email protected]> [230629 13:10]:
>>>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>>>> RNDIS and DFU.
>>>> Is this a mini-B connector? Just wondering if it was originally attempted
>>>> to be configured as OTG or how it ended up with a host configuration..
>>> It's a micro USB-AB connector.
>>> I don't know how it ended up with a host configuration, it looks like an oversight.
>>> Maybe Vignesh or Nishanth can confirm (?)
>> usb0 role should be "otg".
>> It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
>>
>> So I don't think setting it to "peripheral" in u-boot is the right thing to do.
>
> This series is for kernel (not for u-boot).
> Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
>
> With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
> do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
> No USB device found
> USB ether init failed
> initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
> ### ERROR ### Please RESET the board ###
> This error is also returned with usb0 as 'otg'.
This error is at u-boot correct? This will need further investigation.
Does it function correctly in Linux when kept as 'otg'?
--
cheers,
-roger
On 7/3/23 15:44, Roger Quadros wrote:
>
> On 03/07/2023 14:56, Julien Panis wrote:
>> On 6/30/23 21:40, Roger Quadros wrote:
>>> Hi,
>>>
>>> On 30/06/2023 11:30, Julien Panis wrote:
>>>> Hello Tony,
>>>>
>>>> On 6/30/23 09:20, Tony Lindgren wrote:
>>>>> Hi,
>>>>>
>>>>> * Julien Panis <[email protected]> [230629 13:10]:
>>>>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>>>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>>>>> RNDIS and DFU.
>>>>> Is this a mini-B connector? Just wondering if it was originally attempted
>>>>> to be configured as OTG or how it ended up with a host configuration..
>>>> It's a micro USB-AB connector.
>>>> I don't know how it ended up with a host configuration, it looks like an oversight.
>>>> Maybe Vignesh or Nishanth can confirm (?)
>>> usb0 role should be "otg".
>>> It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
>>>
>>> So I don't think setting it to "peripheral" in u-boot is the right thing to do.
>> This series is for kernel (not for u-boot).
>> Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
>>
>> With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
>> do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
>> No USB device found
>> USB ether init failed
>> initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
>> ### ERROR ### Please RESET the board ###
>> This error is also returned with usb0 as 'otg'.
> This error is at u-boot correct? This will need further investigation.
>
> Does it function correctly in Linux when kept as 'otg'?
>
This error is at u-boot level, indeed. I add Tom Rini to this thread, since he
was involved in the discussion here:
https://lore.kernel.org/all/[email protected]/
If dr_mode is set as 'peripheral' in '<board>-u-boot.dtsi' and kept as 'otg'
in linux, it functions correctly in linux.
On 7/3/23 17:27, Roger Quadros wrote:
>
> On 03/07/2023 17:14, Julien Panis wrote:
>> On 7/3/23 15:44, Roger Quadros wrote:
>>> On 03/07/2023 14:56, Julien Panis wrote:
>>>> On 6/30/23 21:40, Roger Quadros wrote:
>>>>> Hi,
>>>>>
>>>>> On 30/06/2023 11:30, Julien Panis wrote:
>>>>>> Hello Tony,
>>>>>>
>>>>>> On 6/30/23 09:20, Tony Lindgren wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> * Julien Panis <[email protected]> [230629 13:10]:
>>>>>>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>>>>>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>>>>>>> RNDIS and DFU.
>>>>>>> Is this a mini-B connector? Just wondering if it was originally attempted
>>>>>>> to be configured as OTG or how it ended up with a host configuration..
>>>>>> It's a micro USB-AB connector.
>>>>>> I don't know how it ended up with a host configuration, it looks like an oversight.
>>>>>> Maybe Vignesh or Nishanth can confirm (?)
>>>>> usb0 role should be "otg".
>>>>> It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
>>>>>
>>>>> So I don't think setting it to "peripheral" in u-boot is the right thing to do.
>>>> This series is for kernel (not for u-boot).
>>>> Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
>>>>
>>>> With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
>>>> do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
>>>> No USB device found
>>>> USB ether init failed
>>>> initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
>>>> ### ERROR ### Please RESET the board ###
>>>> This error is also returned with usb0 as 'otg'.
>>> This error is at u-boot correct? This will need further investigation.
>>>
>>> Does it function correctly in Linux when kept as 'otg'?
>>>
>> This error is at u-boot level, indeed. I add Tom Rini to this thread, since he
>> was involved in the discussion here:
>> https://lore.kernel.org/all/[email protected]/
>> If dr_mode is set as 'peripheral' in '<board>-u-boot.dtsi' and kept as 'otg'
>> in linux, it functions correctly in linux.
> OK.
>
> So NAK for this patch series as we don't want to break 'otg' on Linux.
>
> u-boot doesn't support 'otg' mode. So we need to force it either to
> 'peripheral' or 'host'.
>
> One solution would be to have 'peripheral' in am335x-*-u-boot.dts?
>
OK. In other words, we just need to reconsider my previous u-boot series. :-)
I was setting usb0 as 'peripheral' in 'am335x-*-u-boot.dts' here:
https://lore.kernel.org/all/[email protected]/
Julien
On 03/07/2023 17:14, Julien Panis wrote:
> On 7/3/23 15:44, Roger Quadros wrote:
>>
>> On 03/07/2023 14:56, Julien Panis wrote:
>>> On 6/30/23 21:40, Roger Quadros wrote:
>>>> Hi,
>>>>
>>>> On 30/06/2023 11:30, Julien Panis wrote:
>>>>> Hello Tony,
>>>>>
>>>>> On 6/30/23 09:20, Tony Lindgren wrote:
>>>>>> Hi,
>>>>>>
>>>>>> * Julien Panis <[email protected]> [230629 13:10]:
>>>>>>> This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
>>>>>>> am335x-evmsk, and am335x-icev2. This USB port is mainly used for
>>>>>>> RNDIS and DFU.
>>>>>> Is this a mini-B connector? Just wondering if it was originally attempted
>>>>>> to be configured as OTG or how it ended up with a host configuration..
>>>>> It's a micro USB-AB connector.
>>>>> I don't know how it ended up with a host configuration, it looks like an oversight.
>>>>> Maybe Vignesh or Nishanth can confirm (?)
>>>> usb0 role should be "otg".
>>>> It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
>>>>
>>>> So I don't think setting it to "peripheral" in u-boot is the right thing to do.
>>> This series is for kernel (not for u-boot).
>>> Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
>>>
>>> With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
>>> do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
>>> No USB device found
>>> USB ether init failed
>>> initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
>>> ### ERROR ### Please RESET the board ###
>>> This error is also returned with usb0 as 'otg'.
>> This error is at u-boot correct? This will need further investigation.
>>
>> Does it function correctly in Linux when kept as 'otg'?
>>
>
> This error is at u-boot level, indeed. I add Tom Rini to this thread, since he
> was involved in the discussion here:
> https://lore.kernel.org/all/[email protected]/
> If dr_mode is set as 'peripheral' in '<board>-u-boot.dtsi' and kept as 'otg'
> in linux, it functions correctly in linux.
OK.
So NAK for this patch series as we don't want to break 'otg' on Linux.
u-boot doesn't support 'otg' mode. So we need to force it either to
'peripheral' or 'host'.
One solution would be to have 'peripheral' in am335x-*-u-boot.dts?
--
cheers,
-roger
Hi,
* Julien Panis <[email protected]> [230703 15:51]:
> OK. In other words, we just need to reconsider my previous u-boot series. :-)
> I was setting usb0 as 'peripheral' in 'am335x-*-u-boot.dts' here:
> https://lore.kernel.org/all/[email protected]/
It would be best to not change the dts as it's describing the hardware
capabilities. Instead, it would be better to parse the capability in the
driver to handle a dual-role wired usb-ab connector as peripheral only in
u-boot.
Regards,
Tony