From: Wei Fang <[email protected]>
We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.
step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.
step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500
step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0
After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
Wei Fang (4):
net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
net: fec: recycle pages for transmitted XDP frames
net: fec: increase the size of tx ring and update tx_wake_threshold
net: fec: use netdev_err_once() instead of netdev_err()
drivers/net/ethernet/freescale/fec.h | 17 ++-
drivers/net/ethernet/freescale/fec_main.c | 166 +++++++++++++++-------
2 files changed, 127 insertions(+), 56 deletions(-)
--
2.25.1
From: Wei Fang <[email protected]>
Date: Thu, 6 Jul 2023 16:10:08 +0800
> From: Wei Fang <[email protected]>
Please sync your Git commit author settings wrt Git email settings, so
that there wouldn't be "From:" for your own commits.
>
> We encountered some issues when testing the ndo_xdp_xmit() interface
> of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
> easy to reproduce, and the specific reproduction steps are as follows.
>
> step1: The ethernet port of a board (board A) is connected to the EQOS
> port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
> to another ethernet port, such as a switch port.
>
> step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
> and send packets to i.MX8MP/i.MX93. The command is shown below.
> ./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
> 56:bf:0d:68:b0:9e -s 1500
>
> step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
> XDP frames from EQOS port to FEC port. The command is shown below.
> ./xdp_redirect eth1 eth0
>
> After a few moments, the warning or error logs will be printed in the
> console, for more details, please refer to the commit message of each
> patch.
>
> Wei Fang (4):
> net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
> net: fec: recycle pages for transmitted XDP frames
> net: fec: increase the size of tx ring and update tx_wake_threshold
> net: fec: use netdev_err_once() instead of netdev_err()
>
> drivers/net/ethernet/freescale/fec.h | 17 ++-
> drivers/net/ethernet/freescale/fec_main.c | 166 +++++++++++++++-------
> 2 files changed, 127 insertions(+), 56 deletions(-)
Thanks,
Olek
Hello:
This series was applied to netdev/net.git (main)
by Paolo Abeni <[email protected]>:
On Thu, 6 Jul 2023 16:10:08 +0800 you wrote:
> From: Wei Fang <[email protected]>
>
> We encountered some issues when testing the ndo_xdp_xmit() interface
> of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
> easy to reproduce, and the specific reproduction steps are as follows.
>
> step1: The ethernet port of a board (board A) is connected to the EQOS
> port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
> to another ethernet port, such as a switch port.
>
> [...]
Here is the summary with links:
- [V2,net,1/4] net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
https://git.kernel.org/netdev/net/c/be7ecbe7ec7d
- [V2,net,2/4] net: fec: recycle pages for transmitted XDP frames
https://git.kernel.org/netdev/net/c/20f797399035
- [V2,net,3/4] net: fec: increase the size of tx ring and update tx_wake_threshold
https://git.kernel.org/netdev/net/c/56b3c6ba53d0
- [V2,net,4/4] net: fec: use netdev_err_once() instead of netdev_err()
https://git.kernel.org/netdev/net/c/84a109471987
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html