2023-09-26 04:12:50

by Stefan Roesch

[permalink] [raw]
Subject: [PATCH v3 0/4] Smart scanning mode for KSM

This patch series adds "smart scanning" for KSM.

What is smart scanning?
=======================
KSM evaluates all the candidate pages for each scan. It does not use historic
information from previous scans. This has the effect that candidate pages that
couldn't be used for KSM de-duplication continue to be evaluated for each scan.

The idea of "smart scanning" is to keep historic information. With the historic
information we can temporarily skip the candidate page for one or several scans.

Details:
========
"Smart scanning" is to keep two small counters to store if the page has been
used for KSM. One counter stores how often we already tried to use the page for
KSM and the other counter stores how often we skip a page.

How often we skip the candidate page depends how often a page failed KSM
de-duplication. The code skips a maximum of 8 times. During testing this has
shown to be a good compromise for different workloads.

New sysfs knob:
===============
Smart scanning is not enabled by default. With /sys/kernel/mm/ksm/smart_scan
smart scanning can be enabled.

Monitoring:
===========
To monitor how effective smart scanning is a new sysfs knob has been introduced.
/sys/kernel/mm/pages_skipped report how many pages have been skipped by smart
scanning.

Results:
========
- Various workloads have shown a 20% - 25% reduction in page scans
For the instagram workload for instance, the number of pages scanned has been
reduced from over 20M pages per scan to less than 15M pages.
- Less pages scans also resulted in an overall higher de-duplication rate as
some shorter lived pages could be de-duplicated additionally
- Less pages scanned allows to reduce the pages_to_scan parameter
and this resulted in a 25% reduction in terms of CPU.
- The improvements have been observed for workloads that enable KSM with
madvise as well as prctl


Changes:
- V3:
- Renamed field skip_age to remaining_skips
- Moved fields after old_checksum
- Changed should_skip_rmap_item to use remaining_skips field
- V2:
- Renamed function inc_skip_age() to skip_age()
- Added comment to skip_age() function
- Renamed function skip_rmap_item() to should_skip_rmap_item()
- Added more comments to should_skip_rmap_item function
- Added explicit modification of age with overflow check


Stefan Roesch (4):
mm/ksm: add "smart" page scanning mode
mm/ksm: add pages_skipped metric
mm/ksm: document smart scan mode
mm/ksm: document pages_skipped sysfs knob

Documentation/admin-guide/mm/ksm.rst | 11 +++
mm/ksm.c | 115 +++++++++++++++++++++++++++
2 files changed, 126 insertions(+)


base-commit: 15bcc9730fcd7526a3b92eff105d6701767a53bb
--
2.39.3


2023-09-26 04:12:57

by Stefan Roesch

[permalink] [raw]
Subject: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode

This change adds a "smart" page scanning mode for KSM. So far all the
candidate pages are continuously scanned to find candidates for
de-duplication. There are a considerably number of pages that cannot be
de-duplicated. This is costly in terms of CPU. By using smart scanning
considerable CPU savings can be achieved.

This change takes the history of scanning pages into account and skips
the page scanning of certain pages for a while if de-deduplication for
this page has not been successful in the past.

To do this it introduces two new fields in the ksm_rmap_item structure:
age and remaining_skips. age, is the KSM age and remaining_skips
determines how often scanning of this page is skipped. The age field is
incremented each time the page is scanned and the page cannot be de-
duplicated. age updated is capped at U8_MAX.

How often a page is skipped is dependent how often de-duplication has
been tried so far and the number of skips is currently limited to 8.
This value has shown to be effective with different workloads.

The feature is currently disable by default and can be enabled with the
new smart_scan knob.

The feature has shown to be very effective: upt to 25% of the page scans
can be eliminated; the pages_to_scan rate can be reduced by 40 - 50% and
a similar de-duplication rate can be maintained.

Signed-off-by: Stefan Roesch <[email protected]>
---
mm/ksm.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)

diff --git a/mm/ksm.c b/mm/ksm.c
index 981af9c72e7a..d65eb48f9a13 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -56,6 +56,8 @@
#define DO_NUMA(x) do { } while (0)
#endif

+typedef u8 rmap_age_t;
+
/**
* DOC: Overview
*
@@ -193,6 +195,8 @@ struct ksm_stable_node {
* @node: rb node of this rmap_item in the unstable tree
* @head: pointer to stable_node heading this list in the stable tree
* @hlist: link into hlist of rmap_items hanging off that stable_node
+ * @age: number of scan iterations since creation
+ * @remaining_skips: how many scans to skip
*/
struct ksm_rmap_item {
struct ksm_rmap_item *rmap_list;
@@ -205,6 +209,8 @@ struct ksm_rmap_item {
struct mm_struct *mm;
unsigned long address; /* + low bits used for flags below */
unsigned int oldchecksum; /* when unstable */
+ rmap_age_t age;
+ rmap_age_t remaining_skips;
union {
struct rb_node node; /* when node of unstable tree */
struct { /* when listed from stable tree */
@@ -281,6 +287,9 @@ static unsigned int zero_checksum __read_mostly;
/* Whether to merge empty (zeroed) pages with actual zero pages */
static bool ksm_use_zero_pages __read_mostly;

+/* Skip pages that couldn't be de-duplicated previously */
+static bool ksm_smart_scan;
+
/* The number of zero pages which is placed by KSM */
unsigned long ksm_zero_pages;

@@ -2305,6 +2314,73 @@ static struct ksm_rmap_item *get_next_rmap_item(struct ksm_mm_slot *mm_slot,
return rmap_item;
}

+/*
+ * Calculate skip age for the ksm page age. The age determines how often
+ * de-duplicating has already been tried unsuccessfully. If the age is
+ * smaller, the scanning of this page is skipped for less scans.
+ *
+ * @age: rmap_item age of page
+ */
+static unsigned int skip_age(rmap_age_t age)
+{
+ if (age <= 3)
+ return 1;
+ if (age <= 5)
+ return 2;
+ if (age <= 8)
+ return 4;
+
+ return 8;
+}
+
+/*
+ * Determines if a page should be skipped for the current scan.
+ *
+ * @page: page to check
+ * @rmap_item: associated rmap_item of page
+ */
+static bool should_skip_rmap_item(struct page *page,
+ struct ksm_rmap_item *rmap_item)
+{
+ rmap_age_t age;
+
+ if (!ksm_smart_scan)
+ return false;
+
+ /*
+ * Never skip pages that are already KSM; pages cmp_and_merge_page()
+ * will essentially ignore them, but we still have to process them
+ * properly.
+ */
+ if (PageKsm(page))
+ return false;
+
+ age = rmap_item->age;
+ if (age != U8_MAX)
+ rmap_item->age++;
+
+ /*
+ * Smaller ages are not skipped, they need to get a chance to go
+ * through the different phases of the KSM merging.
+ */
+ if (age < 3)
+ return false;
+
+ /*
+ * Are we still allowed to skip? If not, then don't skip it
+ * and determine how much more often we are allowed to skip next.
+ */
+ if (!rmap_item->remaining_skips) {
+ rmap_item->remaining_skips = skip_age(age);
+ return false;
+ }
+
+ /* Skip this page */
+ rmap_item->remaining_skips--;
+ remove_rmap_item_from_tree(rmap_item);
+ return true;
+}
+
static struct ksm_rmap_item *scan_get_next_rmap_item(struct page **page)
{
struct mm_struct *mm;
@@ -2409,6 +2485,10 @@ static struct ksm_rmap_item *scan_get_next_rmap_item(struct page **page)
if (rmap_item) {
ksm_scan.rmap_list =
&rmap_item->rmap_list;
+
+ if (should_skip_rmap_item(*page, rmap_item))
+ goto next_page;
+
ksm_scan.address += PAGE_SIZE;
} else
put_page(*page);
@@ -3449,6 +3529,28 @@ static ssize_t full_scans_show(struct kobject *kobj,
}
KSM_ATTR_RO(full_scans);

+static ssize_t smart_scan_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sysfs_emit(buf, "%u\n", ksm_smart_scan);
+}
+
+static ssize_t smart_scan_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ int err;
+ bool value;
+
+ err = kstrtobool(buf, &value);
+ if (err)
+ return -EINVAL;
+
+ ksm_smart_scan = value;
+ return count;
+}
+KSM_ATTR(smart_scan);
+
static struct attribute *ksm_attrs[] = {
&sleep_millisecs_attr.attr,
&pages_to_scan_attr.attr,
@@ -3469,6 +3571,7 @@ static struct attribute *ksm_attrs[] = {
&stable_node_chains_prune_millisecs_attr.attr,
&use_zero_pages_attr.attr,
&general_profit_attr.attr,
+ &smart_scan_attr.attr,
NULL,
};

--
2.39.3

2023-09-26 04:13:02

by Stefan Roesch

[permalink] [raw]
Subject: [PATCH v3 2/4] mm/ksm: add pages_skipped metric

This change adds the "pages skipped" metric. To be able to evaluate how
successful smart page scanning is, the pages skipped metric can be
compared to the pages scanned metric.

The pages skipped metric is a cumulative counter. The counter is stored
under /sys/kernel/mm/ksm/pages_skipped.

Signed-off-by: Stefan Roesch <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
---
mm/ksm.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/mm/ksm.c b/mm/ksm.c
index d65eb48f9a13..3de130d170b7 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -293,6 +293,9 @@ static bool ksm_smart_scan;
/* The number of zero pages which is placed by KSM */
unsigned long ksm_zero_pages;

+/* The number of pages that have been skipped due to "smart scanning" */
+static unsigned long ksm_pages_skipped;
+
#ifdef CONFIG_NUMA
/* Zeroed when merging across nodes is not allowed */
static unsigned int ksm_merge_across_nodes = 1;
@@ -2376,6 +2379,7 @@ static bool should_skip_rmap_item(struct page *page,
}

/* Skip this page */
+ ksm_pages_skipped++;
rmap_item->remaining_skips--;
remove_rmap_item_from_tree(rmap_item);
return true;
@@ -3463,6 +3467,13 @@ static ssize_t pages_volatile_show(struct kobject *kobj,
}
KSM_ATTR_RO(pages_volatile);

+static ssize_t pages_skipped_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sysfs_emit(buf, "%lu\n", ksm_pages_skipped);
+}
+KSM_ATTR_RO(pages_skipped);
+
static ssize_t ksm_zero_pages_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
@@ -3560,6 +3571,7 @@ static struct attribute *ksm_attrs[] = {
&pages_sharing_attr.attr,
&pages_unshared_attr.attr,
&pages_volatile_attr.attr,
+ &pages_skipped_attr.attr,
&ksm_zero_pages_attr.attr,
&full_scans_attr.attr,
#ifdef CONFIG_NUMA
--
2.39.3

2023-09-26 04:14:37

by Stefan Roesch

[permalink] [raw]
Subject: [PATCH v3 4/4] mm/ksm: document pages_skipped sysfs knob

This adds documentation for the new metric pages_skipped.

Signed-off-by: Stefan Roesch <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
---
Documentation/admin-guide/mm/ksm.rst | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 1762219baf51..27d949250b67 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -178,6 +178,8 @@ pages_unshared
how many pages unique but repeatedly checked for merging
pages_volatile
how many pages changing too fast to be placed in a tree
+pages_skipped
+ how many pages did the "smart" page scanning algorithm skip
full_scans
how many times all mergeable areas have been scanned
stable_node_chains
--
2.39.3

2023-09-26 20:17:39

by Stefan Roesch

[permalink] [raw]
Subject: Re: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode


David Hildenbrand <[email protected]> writes:

> On 26.09.23 06:09, Stefan Roesch wrote:
>> This change adds a "smart" page scanning mode for KSM. So far all the
>> candidate pages are continuously scanned to find candidates for
>> de-duplication. There are a considerably number of pages that cannot be
>> de-duplicated. This is costly in terms of CPU. By using smart scanning
>> considerable CPU savings can be achieved.
>> This change takes the history of scanning pages into account and skips
>> the page scanning of certain pages for a while if de-deduplication for
>> this page has not been successful in the past.
>> To do this it introduces two new fields in the ksm_rmap_item structure:
>> age and remaining_skips. age, is the KSM age and remaining_skips
>> determines how often scanning of this page is skipped. The age field is
>> incremented each time the page is scanned and the page cannot be de-
>> duplicated. age updated is capped at U8_MAX.
>> How often a page is skipped is dependent how often de-duplication has
>> been tried so far and the number of skips is currently limited to 8.
>> This value has shown to be effective with different workloads.
>> The feature is currently disable by default and can be enabled with the
>> new smart_scan knob.
>> The feature has shown to be very effective: upt to 25% of the page scans
>> can be eliminated; the pages_to_scan rate can be reduced by 40 - 50% and
>> a similar de-duplication rate can be maintained.
>
> Thinking about it, what are the cons of just enabling this always and not
> exposing new toggles? Alternatively, we could make this a compile-time option.
>
> In general, LGTM, just curious if we really have to make this configurable.
>

The only downside I can see is that it might take a longer time for some
pages to be de-duplicated (a new candidate page is added, but its
duplicate is skipped in this round). So it will take longer to
de-duplicate this page.

I tested with more than one workload, but it might be useful to get some
data with additional workloads. I was thinking of enabling it after one or
two releases.

2023-09-26 21:35:50

by David Hildenbrand

[permalink] [raw]
Subject: Re: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode

On 26.09.23 06:09, Stefan Roesch wrote:
> This change adds a "smart" page scanning mode for KSM. So far all the
> candidate pages are continuously scanned to find candidates for
> de-duplication. There are a considerably number of pages that cannot be
> de-duplicated. This is costly in terms of CPU. By using smart scanning
> considerable CPU savings can be achieved.
>
> This change takes the history of scanning pages into account and skips
> the page scanning of certain pages for a while if de-deduplication for
> this page has not been successful in the past.
>
> To do this it introduces two new fields in the ksm_rmap_item structure:
> age and remaining_skips. age, is the KSM age and remaining_skips
> determines how often scanning of this page is skipped. The age field is
> incremented each time the page is scanned and the page cannot be de-
> duplicated. age updated is capped at U8_MAX.
>
> How often a page is skipped is dependent how often de-duplication has
> been tried so far and the number of skips is currently limited to 8.
> This value has shown to be effective with different workloads.
>
> The feature is currently disable by default and can be enabled with the
> new smart_scan knob.
>
> The feature has shown to be very effective: upt to 25% of the page scans
> can be eliminated; the pages_to_scan rate can be reduced by 40 - 50% and
> a similar de-duplication rate can be maintained.

Thinking about it, what are the cons of just enabling this always and
not exposing new toggles? Alternatively, we could make this a
compile-time option.

In general, LGTM, just curious if we really have to make this configurable.

--
Cheers,

David / dhildenb

2023-09-27 03:09:15

by Stefan Roesch

[permalink] [raw]
Subject: Re: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode


Andrew Morton <[email protected]> writes:

> On Tue, 26 Sep 2023 09:13:31 -0700 Stefan Roesch <[email protected]> wrote:
>
>> > Thinking about it, what are the cons of just enabling this always and not
>> > exposing new toggles? Alternatively, we could make this a compile-time option.
>> >
>> > In general, LGTM, just curious if we really have to make this configurable.
>> >
>>
>> The only downside I can see is that it might take a longer time for some
>> pages to be de-duplicated (a new candidate page is added, but its
>> duplicate is skipped in this round). So it will take longer to
>> de-duplicate this page.
>>
>> I tested with more than one workload, but it might be useful to get some
>> data with additional workloads. I was thinking of enabling it after one or
>> two releases.
>
> We could keep the tunable and make it default "on"?

Sounds good to me

2023-09-27 09:12:18

by Andrew Morton

[permalink] [raw]
Subject: Re: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode

On Tue, 26 Sep 2023 09:13:31 -0700 Stefan Roesch <[email protected]> wrote:

> > Thinking about it, what are the cons of just enabling this always and not
> > exposing new toggles? Alternatively, we could make this a compile-time option.
> >
> > In general, LGTM, just curious if we really have to make this configurable.
> >
>
> The only downside I can see is that it might take a longer time for some
> pages to be de-duplicated (a new candidate page is added, but its
> duplicate is skipped in this round). So it will take longer to
> de-duplicate this page.
>
> I tested with more than one workload, but it might be useful to get some
> data with additional workloads. I was thinking of enabling it after one or
> two releases.

We could keep the tunable and make it default "on"?

2023-09-27 11:17:02

by David Hildenbrand

[permalink] [raw]
Subject: Re: [PATCH v3 1/4] mm/ksm: add "smart" page scanning mode

On 27.09.23 02:39, Stefan Roesch wrote:
>
> Andrew Morton <[email protected]> writes:
>
>> On Tue, 26 Sep 2023 09:13:31 -0700 Stefan Roesch <[email protected]> wrote:
>>
>>>> Thinking about it, what are the cons of just enabling this always and not
>>>> exposing new toggles? Alternatively, we could make this a compile-time option.
>>>>
>>>> In general, LGTM, just curious if we really have to make this configurable.
>>>>
>>>
>>> The only downside I can see is that it might take a longer time for some
>>> pages to be de-duplicated (a new candidate page is added, but its
>>> duplicate is skipped in this round). So it will take longer to
>>> de-duplicate this page.
>>>
>>> I tested with more than one workload, but it might be useful to get some
>>> data with additional workloads. I was thinking of enabling it after one or
>>> two releases.
>>
>> We could keep the tunable and make it default "on"?
>
> Sounds good to me
>

+1

Reviewed-by: David Hildenbrand <[email protected]>

--
Cheers,

David / dhildenb