According to the AW88261 datasheet (V1.1) and device schematics I have
access to, there is no reset gpio present on the AW88261. Remove it.
Signed-off-by: Luca Weiss <[email protected]>
---
sound/soc/codecs/aw88261.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/sound/soc/codecs/aw88261.c b/sound/soc/codecs/aw88261.c
index 45eaf931a69c..e7683f70c2ef 100644
--- a/sound/soc/codecs/aw88261.c
+++ b/sound/soc/codecs/aw88261.c
@@ -10,7 +10,6 @@
#include <linux/i2c.h>
#include <linux/firmware.h>
-#include <linux/of_gpio.h>
#include <linux/regmap.h>
#include <sound/soc.h>
#include "aw88261.h"
@@ -1175,14 +1174,6 @@ static const struct snd_soc_component_driver soc_codec_dev_aw88261 = {
.remove = aw88261_codec_remove,
};
-static void aw88261_hw_reset(struct aw88261 *aw88261)
-{
- gpiod_set_value_cansleep(aw88261->reset_gpio, 0);
- usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
- gpiod_set_value_cansleep(aw88261->reset_gpio, 1);
- usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
-}
-
static void aw88261_parse_channel_dt(struct aw88261 *aw88261)
{
struct aw_device *aw_dev = aw88261->aw_pa;
@@ -1254,12 +1245,6 @@ static int aw88261_i2c_probe(struct i2c_client *i2c)
i2c_set_clientdata(i2c, aw88261);
- aw88261->reset_gpio = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(aw88261->reset_gpio))
- dev_info(&i2c->dev, "reset gpio not defined\n");
- else
- aw88261_hw_reset(aw88261);
-
aw88261->regmap = devm_regmap_init_i2c(i2c, &aw88261_remap_config);
if (IS_ERR(aw88261->regmap)) {
ret = PTR_ERR(aw88261->regmap);
--
2.42.0