This patchset adds support for the TCSR clock controller for the new
Qualcomm X1E80100 platform along with the bindings.
Signed-off-by: Abel Vesa <[email protected]>
---
Abel Vesa (2):
dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller
clk: qcom: Add TCSR clock driver for x1e80100
.../bindings/clock/qcom,x1e80100-tcsr.yaml | 55 ++++
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/tcsrcc-x1e80100.c | 295 +++++++++++++++++++++
include/dt-bindings/clock/qcom,x1e80100-tcsr.h | 23 ++
5 files changed, 382 insertions(+)
---
base-commit: 07b677953b9dca02928be323e2db853511305fa9
change-id: 20231122-x1e80100-clk-tcsrcc-f4bb70f119c2
Best regards,
--
Abel Vesa <[email protected]>
Add bindings documentation for the X1E80100 TCSR Clock Controller.
Co-developed-by: Rajendra Nayak <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
---
.../bindings/clock/qcom,x1e80100-tcsr.yaml | 55 ++++++++++++++++++++++
include/dt-bindings/clock/qcom,x1e80100-tcsr.h | 23 +++++++++
2 files changed, 78 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-tcsr.yaml
new file mode 100644
index 000000000000..4adc8ee0287c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-tcsr.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TCSR Clock Controller on X1E80100
+
+maintainers:
+ - Bjorn Andersson <[email protected]>
+
+description: |
+ Qualcomm TCSR clock control module provides the clocks, resets and
+ power domains on X1E80100
+
+ See also:: include/dt-bindings/clock/qcom,x1e80100-tcsr.h
+
+properties:
+ compatible:
+ items:
+ - const: qcom,x1e80100-tcsr
+ - const: syscon
+
+ clocks:
+ items:
+ - description: TCXO pad clock
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ clock-controller@1fc0000 {
+ compatible = "qcom,x1e80100-tcsr", "syscon";
+ reg = <0x1fc0000 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/include/dt-bindings/clock/qcom,x1e80100-tcsr.h b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h
new file mode 100644
index 000000000000..bae2c4654ee2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H
+#define _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H
+
+/* TCSR CC clocks */
+#define TCSR_PCIE_2L_4_CLKREF_EN 0
+#define TCSR_PCIE_2L_5_CLKREF_EN 1
+#define TCSR_PCIE_8L_CLKREF_EN 2
+#define TCSR_USB3_MP0_CLKREF_EN 3
+#define TCSR_USB3_MP1_CLKREF_EN 4
+#define TCSR_USB2_1_CLKREF_EN 5
+#define TCSR_UFS_PHY_CLKREF_EN 6
+#define TCSR_USB4_1_CLKREF_EN 7
+#define TCSR_USB4_2_CLKREF_EN 8
+#define TCSR_USB2_2_CLKREF_EN 9
+#define TCSR_PCIE_4L_CLKREF_EN 10
+#define TCSR_EDP_CLKREF_EN 11
+
+#endif
--
2.34.1
The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Abel Vesa <[email protected]>
---
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/tcsrcc-x1e80100.c | 295 +++++++++++++++++++++++++++++++++++++
3 files changed, 304 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ad1acd9b7426..6ed9c89d9070 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
SM8450 devices.
Say Y if you want to support video devices and functionality such as
video encode/decode.
+
+config X1E_TCSRCC_80100
+ tristate "X1E80100 TCSR Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select QCOM_GDSC
+ help
+ Support for the TCSR clock controller on X1E80100 devices.
+ Say Y if you want to use peripheral devices such as SD/UFS.
endif
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 17edd73f9839..4931a1470137 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -140,3 +140,4 @@ obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
obj-$(CONFIG_KRAITCC) += krait-cc.o
+obj-$(CONFIG_X1E_TCSRCC_80100) += tcsrcc-x1e80100.o
diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
new file mode 100644
index 000000000000..2ec142c3d1f9
--- /dev/null
+++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "reset.h"
+
+enum {
+ DT_BI_TCXO_PAD,
+};
+
+static struct clk_branch tcsr_edp_clkref_en = {
+ .halt_reg = 0x15130,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15130,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_edp_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
+ .halt_reg = 0x15100,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15100,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_2l_4_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_2l_5_clkref_en = {
+ .halt_reg = 0x15104,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15104,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_2l_5_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_8l_clkref_en = {
+ .halt_reg = 0x15108,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15108,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_8l_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_mp0_clkref_en = {
+ .halt_reg = 0x1510c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1510c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb3_mp0_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_mp1_clkref_en = {
+ .halt_reg = 0x15110,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15110,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb3_mp1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_1_clkref_en = {
+ .halt_reg = 0x15114,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15114,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb2_1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_ufs_phy_clkref_en = {
+ .halt_reg = 0x15118,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15118,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_ufs_phy_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_1_clkref_en = {
+ .halt_reg = 0x15120,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15120,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb4_1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_2_clkref_en = {
+ .halt_reg = 0x15124,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15124,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb4_2_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_2_clkref_en = {
+ .halt_reg = 0x15128,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15128,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb2_2_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_4l_clkref_en = {
+ .halt_reg = 0x1512c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1512c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_4l_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *tcsr_cc_x1e80100_clocks[] = {
+ [TCSR_EDP_CLKREF_EN] = &tcsr_edp_clkref_en.clkr,
+ [TCSR_PCIE_2L_4_CLKREF_EN] = &tcsr_pcie_2l_4_clkref_en.clkr,
+ [TCSR_PCIE_2L_5_CLKREF_EN] = &tcsr_pcie_2l_5_clkref_en.clkr,
+ [TCSR_PCIE_8L_CLKREF_EN] = &tcsr_pcie_8l_clkref_en.clkr,
+ [TCSR_USB3_MP0_CLKREF_EN] = &tcsr_usb3_mp0_clkref_en.clkr,
+ [TCSR_USB3_MP1_CLKREF_EN] = &tcsr_usb3_mp1_clkref_en.clkr,
+ [TCSR_USB2_1_CLKREF_EN] = &tcsr_usb2_1_clkref_en.clkr,
+ [TCSR_UFS_PHY_CLKREF_EN] = &tcsr_ufs_phy_clkref_en.clkr,
+ [TCSR_USB4_1_CLKREF_EN] = &tcsr_usb4_1_clkref_en.clkr,
+ [TCSR_USB4_2_CLKREF_EN] = &tcsr_usb4_2_clkref_en.clkr,
+ [TCSR_USB2_2_CLKREF_EN] = &tcsr_usb2_2_clkref_en.clkr,
+ [TCSR_PCIE_4L_CLKREF_EN] = &tcsr_pcie_4l_clkref_en.clkr,
+};
+
+static const struct regmap_config tcsr_cc_x1e80100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x2f000,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc tcsr_cc_x1e80100_desc = {
+ .config = &tcsr_cc_x1e80100_regmap_config,
+ .clks = tcsr_cc_x1e80100_clocks,
+ .num_clks = ARRAY_SIZE(tcsr_cc_x1e80100_clocks),
+};
+
+static const struct of_device_id tcsr_cc_x1e80100_match_table[] = {
+ { .compatible = "qcom,x1e80100-tcsr" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tcsr_cc_x1e80100_match_table);
+
+static int tcsr_cc_x1e80100_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &tcsr_cc_x1e80100_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return qcom_cc_really_probe(pdev, &tcsr_cc_x1e80100_desc, regmap);
+}
+
+static struct platform_driver tcsr_cc_x1e80100_driver = {
+ .probe = tcsr_cc_x1e80100_probe,
+ .driver = {
+ .name = "tcsr_cc-x1e80100",
+ .of_match_table = tcsr_cc_x1e80100_match_table,
+ },
+};
+
+static int __init tcsr_cc_x1e80100_init(void)
+{
+ return platform_driver_register(&tcsr_cc_x1e80100_driver);
+}
+subsys_initcall(tcsr_cc_x1e80100_init);
+
+static void __exit tcsr_cc_x1e80100_exit(void)
+{
+ platform_driver_unregister(&tcsr_cc_x1e80100_driver);
+}
+module_exit(tcsr_cc_x1e80100_exit);
+
+MODULE_DESCRIPTION("QTI TCSRCC X1E80100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
On 22/11/2023 14:42, Abel Vesa wrote:
> Add bindings documentation for the X1E80100 TCSR Clock Controller.
>
> Co-developed-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Abel Vesa <[email protected]>
> +
> +maintainers:
> + - Bjorn Andersson <[email protected]>
> +
> +description: |
> + Qualcomm TCSR clock control module provides the clocks, resets and
> + power domains on X1E80100
> +
> + See also:: include/dt-bindings/clock/qcom,x1e80100-tcsr.h
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,x1e80100-tcsr
> + - const: syscon
It's the same as sm8550, so I think it should be put there. Just like we
do for sm8650.
Best regards,
Krzysztof
On 11/22/23 14:42, Abel Vesa wrote:
> The TCSR clock controller found on X1E80100 provides refclks
> for PCIE, USB and UFS. Add clock driver for it.
>
> Signed-off-by: Abel Vesa <[email protected]>
> ---
[...]
> +static int tcsr_cc_x1e80100_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> +
> + regmap = qcom_cc_map(pdev, &tcsr_cc_x1e80100_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + return qcom_cc_really_probe(pdev, &tcsr_cc_x1e80100_desc, regmap);
> +}
qcom_cc_probe
other than that:
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
Quoting Abel Vesa (2023-11-22 05:42:13)
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index ad1acd9b7426..6ed9c89d9070 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
> SM8450 devices.
> Say Y if you want to support video devices and functionality such as
> video encode/decode.
> +
> +config X1E_TCSRCC_80100
Is the config symbol intentionally namespaced for X1E prefix to group
one SoC? Why not X1E80100_TCSRCC then?
> + tristate "X1E80100 TCSR Clock Controller"
> + depends on ARM64 || COMPILE_TEST
> + select QCOM_GDSC
> + help
> + Support for the TCSR clock controller on X1E80100 devices.
> + Say Y if you want to use peripheral devices such as SD/UFS.
> endif
> diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
> new file mode 100644
> index 000000000000..2ec142c3d1f9
> --- /dev/null
> +++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "clk-regmap-divider.h"
> +#include "clk-regmap-mux.h"
> +#include "common.h"
> +#include "reset.h"
> +
> +enum {
> + DT_BI_TCXO_PAD,
> +};
> +
> +static struct clk_branch tcsr_edp_clkref_en = {
> + .halt_reg = 0x15130,
> + .halt_check = BRANCH_HALT_DELAY,
> + .clkr = {
> + .enable_reg = 0x15130,
> + .enable_mask = BIT(0),
> + .hw.init = &(const struct clk_init_data) {
> + .name = "tcsr_edp_clkref_en",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
> + .halt_reg = 0x15100,
> + .halt_check = BRANCH_HALT_DELAY,
Why are these all branch halt delay but still have a halt_reg?
> + .clkr = {
> + .enable_reg = 0x15100,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
const?
> + .name = "tcsr_pcie_2l_4_clkref_en",
> + .parent_data = &(const struct clk_parent_data){
> + .index = DT_BI_TCXO_PAD,
> + },
On Wed, Nov 22, 2023 at 7:42 AM Abel Vesa <[email protected]> wrote:
>
> The TCSR clock controller found on X1E80100 provides refclks
> for PCIE, USB and UFS. Add clock driver for it.
>
> Signed-off-by: Abel Vesa <[email protected]>
> ---
> drivers/clk/qcom/Kconfig | 8 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/tcsrcc-x1e80100.c | 295 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 304 insertions(+)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index ad1acd9b7426..6ed9c89d9070 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
> SM8450 devices.
> Say Y if you want to support video devices and functionality such as
> video encode/decode.
> +
> +config X1E_TCSRCC_80100
> + tristate "X1E80100 TCSR Clock Controller"
> + depends on ARM64 || COMPILE_TEST
> + select QCOM_GDSC
> + help
> + Support for the TCSR clock controller on X1E80100 devices.
> + Say Y if you want to use peripheral devices such as SD/UFS.
> endif
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 17edd73f9839..4931a1470137 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -140,3 +140,4 @@ obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
> obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
> obj-$(CONFIG_KRAITCC) += krait-cc.o
> +obj-$(CONFIG_X1E_TCSRCC_80100) += tcsrcc-x1e80100.o
> diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
> new file mode 100644
> index 000000000000..2ec142c3d1f9
> --- /dev/null
> +++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
You probably don't need this header and the implicit includes it makes
are dropped now in linux-next. Please check what you actually need and
make them explicit.
Rob