Current API for PHY package are limited to single address to configure
global settings for the PHY package.
It was found that some PHY package (for example the qca807x, a PHY
package that is shipped with a bundle of 5 PHY) requires multiple PHY
address to configure global settings. An example scenario is a PHY that
have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
PHY in the package where the global PHY mode is set and affects every
other PHY in the package.
Change the API in the following way:
- Change phy_package_join() to take the base addr of the PHY package
instead of the global PHY addr.
- Make __/phy_package_write/read() require an additional arg that
select what global PHY address to use by passing the offset from the
base addr passed on phy_package_join().
Each user of this API is updated to follow this new implementation
following a pattern where an enum is defined to declare the offset of the
addr.
We also drop the check if shared is defined as any user of the
phy_package_read/write is expected to use phy_package_join first. Misuse
of this will correctly trigger a kernel panic for NULL pointer
exception.
Signed-off-by: Christian Marangi <[email protected]>
---
Changes v2:
- Make kernel panic if shared is not init (bugged scenario)
- Fix some confusing comments
drivers/net/phy/bcm54140.c | 16 +++++++++----
drivers/net/phy/mscc/mscc.h | 5 ++++
drivers/net/phy/mscc/mscc_main.c | 4 ++--
drivers/net/phy/phy_device.c | 35 ++++++++++++++-------------
include/linux/phy.h | 41 +++++++++++++++++++-------------
5 files changed, 63 insertions(+), 38 deletions(-)
diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c
index d43076592f81..2eea3d09b1e6 100644
--- a/drivers/net/phy/bcm54140.c
+++ b/drivers/net/phy/bcm54140.c
@@ -128,6 +128,10 @@
#define BCM54140_DEFAULT_DOWNSHIFT 5
#define BCM54140_MAX_DOWNSHIFT 9
+enum bcm54140_global_phy {
+ BCM54140_BASE_ADDR = 0,
+};
+
struct bcm54140_priv {
int port;
int base_addr;
@@ -429,11 +433,13 @@ static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb)
int ret;
phy_lock_mdio_bus(phydev);
- ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
+ MII_BCM54XX_RDB_ADDR, rdb);
if (ret < 0)
goto out;
- ret = __phy_package_read(phydev, MII_BCM54XX_RDB_DATA);
+ ret = __phy_package_read(phydev, BCM54140_BASE_ADDR,
+ MII_BCM54XX_RDB_DATA);
out:
phy_unlock_mdio_bus(phydev);
@@ -446,11 +452,13 @@ static int bcm54140_base_write_rdb(struct phy_device *phydev,
int ret;
phy_lock_mdio_bus(phydev);
- ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
+ MII_BCM54XX_RDB_ADDR, rdb);
if (ret < 0)
goto out;
- ret = __phy_package_write(phydev, MII_BCM54XX_RDB_DATA, val);
+ ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
+ MII_BCM54XX_RDB_DATA, val);
out:
phy_unlock_mdio_bus(phydev);
diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 7a962050a4d4..6a3d8a754eb8 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -416,6 +416,11 @@ struct vsc8531_private {
* gpio_lock: used for PHC operations. Common for all PHYs as the load/save GPIO
* is shared.
*/
+
+enum vsc85xx_global_phy {
+ VSC88XX_BASE_ADDR = 0,
+};
+
struct vsc85xx_shared_private {
struct mutex gpio_lock;
};
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 4171f01d34e5..6f74ce0ab1aa 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -711,7 +711,7 @@ int phy_base_write(struct phy_device *phydev, u32 regnum, u16 val)
dump_stack();
}
- return __phy_package_write(phydev, regnum, val);
+ return __phy_package_write(phydev, VSC88XX_BASE_ADDR, regnum, val);
}
/* phydev->bus->mdio_lock should be locked when using this function */
@@ -722,7 +722,7 @@ int phy_base_read(struct phy_device *phydev, u32 regnum)
dump_stack();
}
- return __phy_package_read(phydev, regnum);
+ return __phy_package_read(phydev, VSC88XX_BASE_ADDR, regnum);
}
u32 vsc85xx_csr_read(struct phy_device *phydev,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 478126f6b5bc..424cbb13de13 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1648,20 +1648,22 @@ EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
/**
* phy_package_join - join a common PHY group
* @phydev: target phy_device struct
- * @addr: cookie and PHY address for global register access
+ * @base_addr: cookie and base PHY address of PHY package for offset
+ * calculation of global register access
* @priv_size: if non-zero allocate this amount of bytes for private data
*
* This joins a PHY group and provides a shared storage for all phydevs in
* this group. This is intended to be used for packages which contain
* more than one PHY, for example a quad PHY transceiver.
*
- * The addr parameter serves as a cookie which has to have the same value
- * for all members of one group and as a PHY address to access generic
- * registers of a PHY package. Usually, one of the PHY addresses of the
- * different PHYs in the package provides access to these global registers.
+ * The base_addr parameter serves as cookie which has to have the same values
+ * for all members of one group and as the base PHY address of the PHY package
+ * for offset calculation to access generic registers of a PHY package.
+ * Usually, one of the PHY addresses of the different PHYs in the package
+ * provides access to these global registers.
* The address which is given here, will be used in the phy_package_read()
- * and phy_package_write() convenience functions. If your PHY doesn't have
- * global registers you can just pick any of the PHY addresses.
+ * and phy_package_write() convenience functions as base and added to the
+ * passed offset in those functions.
*
* This will set the shared pointer of the phydev to the shared storage.
* If this is the first call for a this cookie the shared storage will be
@@ -1671,17 +1673,17 @@ EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
* Returns < 1 on error, 0 on success. Esp. calling phy_package_join()
* with the same cookie but a different priv_size is an error.
*/
-int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size)
+int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
{
struct mii_bus *bus = phydev->mdio.bus;
struct phy_package_shared *shared;
int ret;
- if (addr < 0 || addr >= PHY_MAX_ADDR)
+ if (base_addr < 0 || base_addr >= PHY_MAX_ADDR)
return -EINVAL;
mutex_lock(&bus->shared_lock);
- shared = bus->shared[addr];
+ shared = bus->shared[base_addr];
if (!shared) {
ret = -ENOMEM;
shared = kzalloc(sizeof(*shared), GFP_KERNEL);
@@ -1693,9 +1695,9 @@ int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size)
goto err_free;
shared->priv_size = priv_size;
}
- shared->addr = addr;
+ shared->base_addr = base_addr;
refcount_set(&shared->refcnt, 1);
- bus->shared[addr] = shared;
+ bus->shared[base_addr] = shared;
} else {
ret = -EINVAL;
if (priv_size && priv_size != shared->priv_size)
@@ -1733,7 +1735,7 @@ void phy_package_leave(struct phy_device *phydev)
return;
if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
- bus->shared[shared->addr] = NULL;
+ bus->shared[shared->base_addr] = NULL;
mutex_unlock(&bus->shared_lock);
kfree(shared->priv);
kfree(shared);
@@ -1752,7 +1754,8 @@ static void devm_phy_package_leave(struct device *dev, void *res)
* devm_phy_package_join - resource managed phy_package_join()
* @dev: device that is registering this PHY package
* @phydev: target phy_device struct
- * @addr: cookie and PHY address for global register access
+ * @base_addr: cookie and base PHY address of PHY package for offset
+ * calculation of global register access
* @priv_size: if non-zero allocate this amount of bytes for private data
*
* Managed phy_package_join(). Shared storage fetched by this function,
@@ -1760,7 +1763,7 @@ static void devm_phy_package_leave(struct device *dev, void *res)
* phy_package_join() for more information.
*/
int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
- int addr, size_t priv_size)
+ int base_addr, size_t priv_size)
{
struct phy_device **ptr;
int ret;
@@ -1770,7 +1773,7 @@ int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
if (!ptr)
return -ENOMEM;
- ret = phy_package_join(phydev, addr, priv_size);
+ ret = phy_package_join(phydev, base_addr, priv_size);
if (!ret) {
*ptr = phydev;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e5f1f41e399c..51702e349d83 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -327,7 +327,8 @@ struct mdio_bus_stats {
/**
* struct phy_package_shared - Shared information in PHY packages
- * @addr: Common PHY address used to combine PHYs in one package
+ * @base_addr: Base PHY address of PHY package used to combine PHYs
+ * in one package and for offset calculation of phy_package_read/write
* @refcnt: Number of PHYs connected to this shared data
* @flags: Initialization of PHY package
* @priv_size: Size of the shared private data @priv
@@ -338,7 +339,7 @@ struct mdio_bus_stats {
* phy_package_leave().
*/
struct phy_package_shared {
- int addr;
+ int base_addr;
refcount_t refcnt;
unsigned long flags;
size_t priv_size;
@@ -1972,10 +1973,10 @@ int phy_ethtool_get_link_ksettings(struct net_device *ndev,
int phy_ethtool_set_link_ksettings(struct net_device *ndev,
const struct ethtool_link_ksettings *cmd);
int phy_ethtool_nway_reset(struct net_device *ndev);
-int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size);
+int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size);
void phy_package_leave(struct phy_device *phydev);
int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
- int addr, size_t priv_size);
+ int base_addr, size_t priv_size);
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
@@ -1998,46 +1999,54 @@ int __phy_hwtstamp_set(struct phy_device *phydev,
struct kernel_hwtstamp_config *config,
struct netlink_ext_ack *extack);
-static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
+static inline int phy_package_read(struct phy_device *phydev,
+ unsigned int addr_offset, u32 regnum)
{
struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
- if (!shared)
+ if (addr >= PHY_MAX_ADDR)
return -EIO;
- return mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
+ return mdiobus_read(phydev->mdio.bus, addr, regnum);
}
-static inline int __phy_package_read(struct phy_device *phydev, u32 regnum)
+static inline int __phy_package_read(struct phy_device *phydev,
+ unsigned int addr_offset, u32 regnum)
{
struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
- if (!shared)
+ if (addr >= PHY_MAX_ADDR)
return -EIO;
- return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
+ return __mdiobus_read(phydev->mdio.bus, addr, regnum);
}
static inline int phy_package_write(struct phy_device *phydev,
- u32 regnum, u16 val)
+ unsigned int addr_offset, u32 regnum,
+ u16 val)
{
struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
- if (!shared)
+ if (addr >= PHY_MAX_ADDR)
return -EIO;
- return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
+ return mdiobus_write(phydev->mdio.bus, addr, regnum, val);
}
static inline int __phy_package_write(struct phy_device *phydev,
- u32 regnum, u16 val)
+ unsigned int addr_offset, u32 regnum,
+ u16 val)
{
struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
- if (!shared)
+ if (addr >= PHY_MAX_ADDR)
return -EIO;
- return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
+ return __mdiobus_write(phydev->mdio.bus, addr, regnum, val);
}
static inline bool __phy_package_set_once(struct phy_device *phydev,
--
2.40.1
Some PHY in PHY package may require to read/write MMD regs to correctly
configure the PHY package.
Add support for these additional required function in both lock and no
lock variant.
It's assumed that the entire PHY package is either C22 or C45. We use
C22 or C45 way of writing/reading to mmd regs based on the passed phydev
whether it's C22 or C45.
Signed-off-by: Christian Marangi <[email protected]>
---
Changes v4:
- Drop function comments in header file
Changes v3:
- Move in phy-core.c from phy.h
- Base c45 from phydev
Changes v2:
- Rework to use newly introduced helper
- Add common check for regnum and devad
drivers/net/phy/phy-core.c | 136 +++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 16 +++++
2 files changed, 152 insertions(+)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index b729ac8b2640..b5868282def1 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -650,6 +650,142 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
}
EXPORT_SYMBOL(phy_write_mmd);
+/**
+ * __phy_package_read_mmd - Convenience function for reading a register
+ * on an MMD on a given PHY using the PHY package base addr, added of
+ * the addr_offset value.
+ * @phydev: The phy_device struct
+ * @addr_offset: The offset to be added to PHY package base_addr
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for __phy_read();
+ *
+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
+ */
+int __phy_package_read_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
+
+ if (addr >= PHY_MAX_ADDR)
+ return -EIO;
+
+ if (regnum > (u16)~0 || devad > 32)
+ return -EINVAL;
+
+ return mmd_phy_read(phydev->mdio.bus, addr, phydev->is_c45, devad,
+ regnum);
+}
+EXPORT_SYMBOL(__phy_package_read_mmd);
+
+/**
+ * phy_package_read_mmd - Convenience function for reading a register
+ * on an MMD on a given PHY using the PHY package base addr, added of
+ * the addr_offset value.
+ * @phydev: The phy_device struct
+ * @addr_offset: The offset to be added to PHY package base_addr
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ *
+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
+ */
+int phy_package_read_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
+ int val;
+
+ if (addr >= PHY_MAX_ADDR)
+ return -EIO;
+
+ if (regnum > (u16)~0 || devad > 32)
+ return -EINVAL;
+
+ phy_lock_mdio_bus(phydev);
+ val = mmd_phy_read(phydev->mdio.bus, addr, phydev->is_c45, devad,
+ regnum);
+ phy_unlock_mdio_bus(phydev);
+
+ return val;
+}
+EXPORT_SYMBOL(phy_package_read_mmd);
+
+/**
+ * __phy_package_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY using the PHY package base addr, added of
+ * the addr_offset value.
+ * @phydev: The phy_device struct
+ * @addr_offset: The offset to be added to PHY package base_addr
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for __phy_write();
+ *
+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
+ */
+int __phy_package_write_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum, u16 val)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
+
+ if (addr >= PHY_MAX_ADDR)
+ return -EIO;
+
+ if (regnum > (u16)~0 || devad > 32)
+ return -EINVAL;
+
+ return mmd_phy_write(phydev->mdio.bus, addr, phydev->is_c45, devad,
+ regnum, val);
+}
+EXPORT_SYMBOL(__phy_package_write_mmd);
+
+/**
+ * phy_package_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY using the PHY package base addr, added of
+ * the addr_offset value.
+ * @phydev: The phy_device struct
+ * @addr_offset: The offset to be added to PHY package base_addr
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ *
+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
+ */
+int phy_package_write_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum, u16 val)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ int addr = shared->base_addr + addr_offset;
+ int ret;
+
+ if (addr >= PHY_MAX_ADDR)
+ return -EIO;
+
+ if (regnum > (u16)~0 || devad > 32)
+ return -EINVAL;
+
+ phy_lock_mdio_bus(phydev);
+ ret = mmd_phy_write(phydev->mdio.bus, addr, phydev->is_c45, devad,
+ regnum, val);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL(phy_package_write_mmd);
+
/**
* phy_modify_changed - Function for modifying a PHY register
* @phydev: the phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 51702e349d83..f58a9ff52e0d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -2049,6 +2049,22 @@ static inline int __phy_package_write(struct phy_device *phydev,
return __mdiobus_write(phydev->mdio.bus, addr, regnum, val);
}
+int __phy_package_read_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum);
+
+int phy_package_read_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum);
+
+int __phy_package_write_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum, u16 val);
+
+int phy_package_write_mmd(struct phy_device *phydev,
+ unsigned int addr_offset, int devad,
+ u32 regnum, u16 val);
+
static inline bool __phy_package_set_once(struct phy_device *phydev,
unsigned int b)
{
--
2.40.1
Some nit picks since nobody has acked :(
On Thu, 7 Dec 2023 00:25:47 +0100 Christian Marangi wrote:
> +/**
> + * __phy_package_read_mmd - Convenience function for reading a register
> + * on an MMD on a given PHY using the PHY package base addr, added of
s/on an MMD/of an MMD/ ?
s/added of/added to/ ?
> + * the addr_offset value.
> + * @phydev: The phy_device struct
> + * @addr_offset: The offset to be added to PHY package base_addr
> + * @devad: The MMD to read from
> + * @regnum: The register on the MMD to read
> + *
> + * Same rules as for __phy_read();
> + *
> + * NOTE: It's assumed that the entire PHY package is either C22 or C45.
I'd try to make the headline shorter:
/**
* __phy_package_read_mmd - read MMD reg relative to PHY package base addr
* @phydev: The phy_device struct
* @addr_offset: The offset to be added to PHY package base_addr
* @devad: The MMD to read from
* @regnum: The register on the MMD to read
*
* Convenience helper for reading a register of an MMD on a given PHY
* using the PHY package base address. The base address is added to
* the addr_offset value.
*
* Same calling rules as for __phy_read();
*
* NOTE: It's assumed that the entire PHY package is either C22 or C45.
*/